Defining number of threads to use.

Hi
A quick question i am not really sure if there is a config command that exisist, is there a command that i can implement into essbase.cfg to when ever Essbase performes anything i need it to use 3 threads or 7 basically defining number of threads that the app can use. I looked into Technical reference i found thid for Calc and exportthread. i basically want to change this because when ever i do database restructrue it onloy uses one CPU while other cups are just idel at 0%.
Any reply or ssuggestions is greatly appericiate.
Thanks,

Hi,
As Glenn mentioned, parallel restructuring feature is only available in 11.1.2.2 as of now.
If you are on this version then refer following link for more information.
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?restructurethreads.html
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?dstrestr.html (Refer Parallel Restructuring)
This change needs to be done in essbase.cfg file.
Hope this helps in addition to Glenn's explanation.
Regards
-SM

Similar Messages

  • Increasing number of Threads in the Thread Pool

    Hi,
    Using newFixedThreadPool ( int nbThreads )_, how do I increase the number of threads allowed dynamically in my application ?
    Thank you

    As the name of the method implies the Pool returned by that method supports only a fixed number of threads.
    If you want to be able to modify the number of threads after instantiation, then you could use a ThreadPoolExecutor. This class supports changing the number of threads it uses.

  • Number of threads used in default

    default execution threads in bea are 25, but when looking through Windows Task Manager we see there are 120 threads being used.
    How do we account for this number? is it for JDBC connections ? where are the other threads comming into picture? can anyone throw some light

    on the console, right click on a server, and select "view execute queues". then click on the default queue. if tasks queue up, and reach the threshold percent, weblogic will add more threads, by the amount specified in Thread Increase, up toa maximum of Thread Maximum. you might want to take a look at why your server is not working fast enough to keep the queue low or empty.
    http://e-docs.bea.com/wls/docs70/perform/WLSTuning.html#1124626

  • High number of threads and high CPU usage on a single instance

    Without any apparent reason, in some moments of day the website reports an increment of the HTTP Queue Length from an average of 10/20 queued requests to 100/200 and more.
    In that period of time the Average Response Time increases but the number of the requests on the website don't. Even increasing the instances it doesn't help to resolve the problem (maybe it just reduced it).
    It seems that the problem is not related to the traffic on the site. This issue happens either when the traffic is high or low.
    The autoscaling works well, we don't have peak of traffic but always a slow increasing of requests and the CPU is always below the 50% (memory too). The issue is resolved by the swap of the site and sometimes it's resolve by itself after a while.
    What I discovered when the issue happens, is that there's an instance (just an instance only), that has an high number of threads and CPU usage on the W3WP.exe process and these values are above the mean than the other instances. Eg, instances are around
    50/60 threads and 10/20% of CPU, the instance with the problem has 200 threads and 50/60% of CPU. If I kill the W3WP process on that instance the issue is resolved. 
    I monitored the HTTP requests, I tried the website extension "Diagnostics as service" but I can't discover anything that can help me to understand the problem. Of course, there are many requests that go in timeout but it is a consequences of a
    unresponsive instance.
    On the web hosting plan there are only two sites: the production site and its staging which is used for update of the production only and it's always sleeping. Plus, no webjobs are running on this site.
    What can I do to gather useful information that can help me to understand the reason of this problem?
    Thank you!

    "Does the instance with the high counts receive more traffic than the other instances? Is it possible that the load balancer not
    working the way it should be?"
    How can I get that information? I can't see metrics for a specific instance
    "Does it always happen to the first instance?"
    I will check it better, but in the order given by the Processes panel it's the second instance which has the issue. The scaling is at 2 instances for the most part of the time (it's the minimum).
    Maybe one time it was the 3th instance but I'm not sure, I'll give it more attention.
    " How long do these moment last?"
    The time can be 10 to 30 minutes, but I fix it as soon as I see the problem. It's not the down-scaling to resolve it because in these situations the CPU as well is high so the scaling holds or increases the number of instances.
    "- How often do these moments occurs?"
    It occurs quite often, 2/4 times a week.

  • How to find out the number of threads created under java vm at runtime

    our application seems to have hit the max number of threads that can be created under vm and the vm will just hang after that. that behavior seems to be consistent from an article that I read earlier.
    I wonder any way that java app can find out the number of threads currently created under vm?
    thanks in advance!

    If you are not starting an extra thread group you can use the Thread.activeCount method. But this willnot return all the threads, as there are some jvm threads, i.e. garbage collector. Also if you are running on a Unix type operating system then you can send a signal to the jvm to give you a thread dump, i think the signal is sighup.
    If the application is hanging i would of thought that you have a deadlock situation rather then the JVM not being able to create new threads, roughly how many threads should be running ??

  • Max. Number of connections in use Nokia N93

    Hi
    I am trying to connect to wireless router using WEP. I have configured the access point and when I try to connect with Opera Mobile 3.6 an error occurs:
    Max. Number of connections in use. Close na active connection first.
    Note that my phone is not woring in dual mobe but GSM only.
    When I try connecting with the Phone's browser:
    WLAN: Unable to connect. WLAN Network not found
    Lumia 920 OS version: 8.0.10521.155
    FW revision number: 3047.0000.1326.2002

    Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
    To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
    Hope this helps, even though it might not be simple for some.
    2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

  • Maximum number of connections in use. Close an act...

    Hi everyone.
    I try to connect my N95 to internet, using "One Touch Access" and USB. It used to be working ages ago! but now, it is impossible. it gets connected with the phone, but when i want to open a web page, it say "maximum number of connections in use. Close an active connection first", and forces me to close my Modem connection, and everything gets disconnected...
    what should i do????
    help please...

    97268450 wrote:
    when i open face book application,the same problem maximum number of connection in use. Close an active connection first. i have nokia 5233
    This issue was already answered by other threads. You can click here and  here for more information.
    Hope this will help you.

  • How to reduce the number of data blocks used by table

    Hi,
    I was trying to reduce the space usage of a particular table of my apex application which stores blob content and therefore deleted many records from it.
    However, the data block usage remained the same as before.
    I have tried to 'analyze' the table and validate the structure,but am unable to overcome this problem.
    Could someone throw some light on what needs to be to reduce the number of data blocks used by this table?
    Best Regards,
    Priya Jetley

    Priya:
    It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
    Varad

  • "max number of thread"

    We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
    The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
    Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
    Is there any setting in WebLogic for “max number of thread” that can handle?
    Edited by: user9316392 on Jul 8, 2010 11:07 AM

    First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
    http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
    Practically, I wouldn't expect more than several hundred threads to be helpful.
    As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

  • Nokia N8-00 'maximum number of connections in use'

    Hi,
    I have creted another APN in the Destinations-Internet settings. Put this APN on priority 1. Then I se internet an it is ok. But when I open Nokia Maps or another App. Sometimes it tries to connect to the old APN then says 'maximum number of connections in use'. Asking me for confirmation to close one connection.
    So I move all APN's and Wireless connections out of the Destination Internet. Except for the new on that I want. Still the same message From time to time. How to stop thi message. Deleting an APN is not a solution I am looking for otherwise I would have done that.
    Any help is appreciated.

    So the on off method I posted earlier did not work. The first APN is still tring to be accessed by some apps after the phone is switched off and on again. The other things I tried..
    - Removed the APN restriction and renamed the first APN. When I start the APP it now gives me a warning and lets me choose the APN. I choose the second one so greate. Close the APP. Now when I rename the fisr APN to the original name. APPS try to access it again and I get that original error.
    The only thing I could do is configure the first APN name with the actual Access Point of the second APN. This worked All apps are accessing the first APN whaich was reconfigured to look like the new Second APN. 
    This is not a solution again it is a workaround. Does anyone-else have this problem. Or am I the only one who is configuring multiple APNs. Since my provider has multiple APNs.
    I would have thought that this phone supports Multiple PDP contexts, or Secondary PDP context. It was defined in the initial 3GPP specs way back in 2003ish. Nokia can you confirm???
    Cheers Peps!

  • Nokia E90 - Maximum number of connections in use e...

    I invariably get the error - Maximum number of connections in use. Please close open connection - (this is not the exact verbiage of the message) when i connect to the gprs / wap. this started occuring after i updated my firmware from 200.x.x to 210.34.75.
    The funniest part is that the application would connect to wap / gprs if i select cancel and ignore the message and continue.
    If i select Yes, then i will be forced to close at least one application which is connected to the wap / gprs
    I have different access points configured for each application and hence i see no reason for this error message.
    Also, i never had this issue with this phone before, when i was using the same setup; separate access points for the applications which use gprs / wap.
    Please advice as to how i can get rid of this message popping up every time i use wap / gprs.
    Please help....
    Also are there any good navigation softwares with Maps for India available, so that i can use it on my E90 and N82.

    Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
    To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
    Hope this helps, even though it might not be simple for some.
    2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

  • Max number of threads in Java?

    Hi,
    I am running into a bug now that I am testing my working code. Basically, my program creates a bunch of objects that talk to each other. Each object is a thread, and at a given time (there is a one object that keeps track of time) a thread may choose to message another thread. My problem is that when I create more objects, my code doesn't run to completion. For example, when I have 10 objects talking to each other, things work fine. But if I have 15, they all run for a little bit, then the program seems to just hang and not do anything.
    Is there a limit as to how many threads I can have? If I was out of memory or something, I'd get an exception, right? But I don't get anything - it just seems like things "freeze up".

    15 threads? shouldn't be a problem.
    I think th emax threads allows runs in thousands..if not ten of thousands.Java process threads itself use about 600 or more threads. howevr, it could also be the underlying system restr8iction on the number of threads allow per process????
    for you case: it's highly likely you run into the max # of threads.
    I can only think of two reasons for your application to freeze:
    1. Deadlock
    if you have an object that is synchronized..than you might have run into a deadlock (race-condition)
    for example:
    Object A has the key for Object X , and waiting for Object Z
    Object B has the key for Object Z, and waiting for Object X
    as you can see..they will never gives up the lock....so you're in a dead lock.
    2. Low memory resource. (Memory - Paging and Thrashing)
    Each of your thread is using up the resouces (memory) and processing power.
    When you reach the max or near max and needs to create more memory..the garbage collector kick in
    and try to reclaim some unused memory. This can slow down your application dramatically if the garbage
    collector is invoke often.
    Also..paging is performed when you reach max memory..the operating system keep on paging your memory (usually happens when there's a lot of threads and not enough memory. If this happen..than it
    can cause your program to becomes freeze like....remeber..each thread is given a small amount of time to
    perform a task..if the time it takes to load a page for a thread is almost equals to context switch time..than
    no work is really done..and your program "freeze"
    solution..redesign you app to prevent thrashing.
    it is likely paging is the culprit..but i would not dismiss deadlock issues.

  • How can I find out what port number my DB is using

    How would one find out what port number a database is using? Is there a SQL command that will allow us to do this?
    Thanks,
    oracle_newbie

    newbie
    Oracle databse assigns a dynamic port number for each established session. Usually, the common port is 1521 which is defined in you tnsnames.ora, however, this is used for requesting a dynamic port. Dynamic ports are within a ragne of 1000+. That's why it is hard to tell which port you are using at a certain time. You should have a network monitoring tool to check this accurately.
    Regards
    null

  • In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

    In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
    And please help me can type Laos font in it like andrio phone.

    Hi Cozumel,
    Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Max Number of threads per Process in Solaris 8

    I'm running into qpplication which crashes with a segfault when the LWP for that process hits about 255, i'm trying to find the maximum number of threads per process using sysconf and its returning -1
    #include <unistd.h>
    int
    main(void)
    printf("%ld\n",sysconf(_SC_THREAD_THREADS_MAX));
    return 0;
    I'm using gcc 3.3.2
    If anyone can tell me the maximum number of threads per process I would really appreicate it.
    Also the maximum number of open files per process.
    Thanks in advance
    - Rodrick Brown
    - DoITT

    Please make sure that you build a
    multithreaded program first (check with ldd).
    If anyone can tell me the maximum number of threads per process I would
    really appreicate it.
    Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
    64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
    Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
    HTH,
    -vladimir

Maybe you are looking for