Defining Packaging Material Types

Hi all,
Pls help me to resolve this problem. I want to define Packaging Material Types. When I define the 3rd record. There is an error: Entry B 000001 does not exist in T683 (check entry). The point stand at OutputDet.Proc. field. The first and second record, i also enter the exact this value, but no error.
What do i do?
Thanks,

Dear Quang
1) Check in Material Master Sales: sales org.1 whether you have maintained Delivering Plant
2) Check in ovx6 whether plant is assigned to sales organization and distribution channel
3) Check in ovf0, whether you have assigned Business Area to Plant and Division
thanks
G. Lakshmipathi

Similar Messages

Can we increase the field length of Packaging material type description

Hi,
The field length allowed for packaging material type description is 20 characters. If i need to have this length to be increased to 25-30.Is it possible?
I mean the description that we give when we create new packaging material type.
Pls let me know ur suggestions.

Hi Dhilipan Nair,
Unfortunately there is no standard way to change this, the desc. field of the view (V_TVTY-VTEXT) is created from the value T685T-VTEXT which has been defined with the Domain TEXT20, so in order to add addition characters to this field, you would need to redefine the preceding field type.
Regards
Stephen

Problem with Packaging Material Type

Hello all Gurus,
I have a problem with a packaging material type that I have created copying the standrad Packaging material type LEIH. I created a new packing material type ZPAC - Packaging Material copying LEIH.
I then created a new material master record using this new material type ZPAC.
When I am using this material for packing in outbound delivery document - VL01N, I am getting the following strange error message:
20333 does not have packaging material type and is therefore not a pack.mat.
Please suggest me why this error is coming and how I can rectify this error. Is there any further configuration that I need to do for packaging material types??? Kindly suggest.
Thanks and Regards,
Umakanth.

Hi,
Material type is not enough, you have to maintain proper master data as well as config.
At least please maintain value in MARA-VHART for the packaging material. Please also check these links how HUM works:
http://www.sap-img.com/sap-hu.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c8/a44b779f3211d2858d0000e81ddea0/frameset.htm
Regards,
Csaba

Create an external HU with different packaging material type

Hi All,
Iu2019m trying to create an external handling unit with the material below:
Packaging material: 2892
Packaging material type: Z501
Material Group: Packaging Materials: Z501
But the system creates de HU with the Packaging material type: 0001 instead Z501.
My question is.. How can I set the material or HU to take the Packaging material type Z501?
Thank you for your comments,
Jaime S.

My problem has been solved. Regards

Packaging material type-SU type

Hello to all
While manually packing / repacking HU for outbound delivery against customer order the error "Packaging materail type XXXX in warehouse ABC is not assigned to SU type"
On checking the customising setting at "Logistics General >HUM>Basics>WM>Assign Storage unit type to packaging material type" I found that there is no assignment of Pkg mat type to SU type.
Please confirm (as I am under the belief that this setting is relevant only when HU has to be automatically packed for moving into warehouse) if the above customising controls the error as I do not have access to test by changing the customisation.
Thanks
Prasad

Hi Prasad,
Even you do the manaul packing also. system checks the validation for SU type with HU type
regards,
Ramana

Packaging material type

I have created material using the material type VERP
this is a packaging material & I want to add packaging material type in the material master but i am not able to find this field there can you guys please tell me the exact view wherein i can mention the packaging material type

I have used Material type VERP for creating the material.
let me clarify 1 thing i.e. packaging material type and material type VERP are two different things
packaging material type is field in material master and its not the one which comes while creating the material as that is material type
and this is my packing material in which i want to pack the material X(FERT)
As per my understanding the Material X will carry the packaging material group and the packing material must carry the packaging material type becuase in the config (logistics execution> shipping> allowed packaging material type per material group) packaging material type is having certain allowed material group.
due to this config i can pack my material X only in certain type of packing materials

Packaging material type and packaging materials

Hello all,
I would like to know how to generate specific means of transport based on packaging material type and packaging materials.
Thanks,
Maxx

can we know answer for your qtn?

Plz can someone tell me where can I define the material type?

Hi All,
I want to create a new group of material, there is a material type should be specified. I want to use my own. plz can someone tell me where can i define it?
thanks and regards,
samson

Hi Samson,
U can create a new material type using the tcode OMS2 and then copy the material type which u need to modify and then define the name of the new material type and make the required changes which u want for that material type and save it.
Hope it wud have answered ur question
reward if useful
Shawn

Urgent:Material Type for Packaging Material in WM and MM

Hi
There is a place in SPRO where i can define the material type for packaging.
Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
How can i create a material using this material type? What is the use of material type here?
Whenever i create material in MM01/MM41, i get the standard material type list.
Thanks & REgards
Kapil

Hi,
In T.code: OMS2, you can get standard material type list.VERP is the standard material type for packing material.You can copy VERP and rename to ur material type( as it is ur business requriement or else u can use same VERP)
What is the use of material type here?
With the help of ur Material Type , u can craete material like The material type,will be used while defining the material
master.At that time,in Tcode:MM01,first screen we need to
mention,(material type)it show the nature of material
ex:-engineering product,finished products,semifinished
product,etc.,
It also play vital role on material numbering,material type in comination with plant & valuation class, play vital role in inventory & accoputning.
To Create Material,use t. Code: MM01,
Step-1
Enter Material Code: ( example-Polythene Bag, If External Number Range or leave it blnak)
Enter Industry Sector: ...................
Enter Material Type: ..........................(VERP- Packing)
Step-2
Select
Views you required( like eample:basic data-1, like basic data-2,purachsing, purchase order text,General plant data, accounting-1, accounting-2 etc)
Step-3
Enter Plant,
Enter Storage location
{{{Enter Sales organization & Distribution channel(if sales view selected)}}}
Step-4
You will have views like (example-1, basic data, enter Base unit of measure, material group and other details as required field,example-2,Accounting data, enter valuation class, price control; S or V & price)
Step-5
Save.
Note: Before creation material you must know which Industry Sector, Material Type ur going to use and material numbering is internal or external.
For more, check the following link for creation of material
http://www.synactive.com/docu_e/doc_multi_mm01.html
Regards,
Biju K

Regarding:Return process of Packaging material to Vendor

Dear SAP Experts,
When we purchase consumables material it come in packaging material from vendor.
Then we send packaging material back to vendor.But this process is mannual.
Now we want this process by system.
Please help to configure this procedure in my system.
With Regards
Mukul Kumar

hI,
I hope you are looking for packaging instruction for vendor.
As vendor will send the materiel in packaging and after delivering the material will take back the packaging material. if this is yes. Then it can be deal with Handling unit the benefit you would have of this is, harmonized way of packaging the material. And even you can create packaging instruction to vendor with weight and seize of the product .
Configuration as below for handling unit.
Go to SPRO> Logistics - General>Handling Unit Management--step1)>Define Packaging Material Types
Step 2) Define Material Group for Packaging Materials-
Step 3) Define Allowed Packaging Materials- By assigning packaging material types to the material groups for packaging materials, you define which packaging materials are allowed for packing.
Step 4) Use Handling Unit Supplements
SPRO> Logistics - General>Handling Unit Management>External Identification>Set Unique Number Assignment for HU Identification--It is only possible to indicate a storage location as HU-managed if you have set this indicator. The use of non-assigned handling units without unique number assignment is not supported
Step 2) Number Range Maintenance for HU Identification--You can maintain number ranges for number assignment for handling unit identification via number range intervals which is consists of 9 digits without overlapping
step 3) SSCC Generation Acc to EAN128
3 a) Maintain Number Range Object for SSCC-- Number range object "LE_SSCC" is provided with interval "01" and a 9-digit number length. Create the number range objects and intervals necessary for your organization and country dependent.
3 b) Maintain SSCC Generation for Each Plant / Storage Location-
4) SPRO> Logistics - General>Handling Unit Management>Automatic Packing> Packing Instructions Master Data-->Define Number Ranges for
Packing Instructions.
All your setting is in place
Then go to POP1 to create packaging instruction.
And maintain determination record using POF1 with key combination as vendor /Plant/ material, for condition type RCPT For incoming material & SHIP-Ship to party material.
Or even you can send back the returnable packaging material by using 501M > MIGO>Other Movt type--> 501M.
Hope this clear.
Rgs

How to treat packaging material at GR / no track

Guru ,
i have done GR for a material with a packaging material which consistutes a handling unit .
ie handling unit= materaial + packaging material .
when i did GRN , maetrial is shown in the storage location . fine .
where is the packaging material along the material gone . NO trace of it .
please help , my question is genuine .
manu

Hi Manu,
I assume your basic settings for handling units are ok (e.g. item category group settings in material master for packmat and to-be-packed material - e.g. MARA-VHART, MVKE-MTPOS, MARA-MAGRV).
What you have to do:
- SPRO > LE > SHipping > Deliveries > Define Item Category Determination for Deliveries - here you have to set: "Delivery type"-"Item category group"-"Usage"-"item category high level item"-Item category" combination (e.g.: LF-LEIH-PACK-<empty>-DLN)
- SPRO > LE > Shipping > Pack > Define Packaging Material Types - here you have to maintain Plant determination for HU" field for your packmat ("Plant proposed from the first item that was packed).
Please also ensure whether generation of packaging material type is allowed for the delivery type you use: SPRO > LE > Shipping > Deliveries > Delivery Type - here set "Gen. pack. matl. item"
If these settingsare ok > create the delivery in VL01N > pack the main item (VL02N > (menu) Edit > Pack). Whe you go back to overview you should see the newly generated item for your packaging material.
If you want the packaging material item automatically generated when you create the delivery, you have to:
- maintain packaging instruction for the to-be-packed item
- set auto pack indicator for delivery type (SPRO > LE > Shipping > Deliveries > Delivery Type - here set "Automatic packing")
Regards,
Csaba

Strange behaviour of packaging material

Hi Gurus,
I found a strange problem.
The loading group of packaging material in material master is not copied to delivery note item after generating the packaging material.
I don't know what's wrong with it. Please give me some clues.
Thank you,
Gunadi

Hi Gunadi
Check for the following:
Using MM01, create material type=packaging test_pack
[SPRO]
IMG-Logistics Execution-Shipping-Packing-
Define Packaging Material Types
Let's say JPAC. The settings that I chose:
Plant determ. - Plant is entered manually in handling unit
Pack. matl. cat. - Packaging materials
Generate Dlv. Items - blank
Number assignment - Number range interval 'HU_VEKP'
IMG-Logistics Execution-Shipping-Packing-
Define material group for packaging material
Let's say JGRP
IMG-Logistics Execution-Shipping-Packing-
Define allowed packaging materials
JGRP - JPAC
MM02: Check settings for the materials
First, test_pack
Sales:General/Plant -> Matl. Grp. Pack. Matls: JGRP (Note)
Sales:General/Plant -> Packaging Mat. Type: JPAC (Note)
Basic Data 1 -> Material: JMAT
Then, shirt_jai
Sales:General/Plant -> Matl. Grp. Pack. Matls: JGRP
Sales:General/Plant -> Packaging Mat. Type: -
Basic Data 1 -> Material: JMAT
VL01N Outbound Delivery -> Packing
Enter the materials at top and at bottom
(Select shirt_jai and
Edit - Pack)
This is how the basic process of packing works.
The "Packing Process" with an Example
Example:
You created a order for a material(R-1160 - hard disks) for a qty - 120 pieces.
You need to create a delivery and
A)pack 40 pieces each of the material are grouped together into larger cardboard boxes (PK-100 - shipping/packing material) and
B)these 3 cardboard boxes are put into pallet (PK-095).
Solution:
A)Packing 40 pieces each of material (40 x 3 = 120 pieces)
1)Goto [VL02N] to change the delivery, you already created.
Or you can do the following steps while you are creating a delivery also.
2)Go to "pack" icon.
3)In the upper section, enter the "packing material" (PK-100)
4)In the lower section, change the "partial quantity" to 40 of material R-1160.
5)Select both the lines of upper section and lower section and click the green ok. It generates a shipping unit/handling unit number.
6)Now, select both lines of upper & lower section & click the button "per part. qty" (New HU per part qty of material)
Check: click "General Overview" icon to see whether it packed 40 pieces of material in 3 cartons.
B)Packing all 3 cartons in one big carton(PK-095)
1) from above screen, click "pack HUs" (pack shipping unit)
2)enter the packaging material (PK-095) in the upper section and select this line.
3)select 3 lines of PK-100 in lower section since you want to pack them in PK-095.
4)selecting both lines, click "pack" icon.
5)Now all the 3 cartons(PK-100 with 40 pieces each of material) are packed in one big carton (PK-095).
Check: "General overview" icon.
Reward if useful to u

Defining Material types in MM01

Dear All,
I want to know how to define material types. Here client needs to bring same material under inventory and non inventory.
Example
1.100 is one material number.some times they required to bring the 100 material into stock and some of the times they want to book the material 100 in direct consumption account after taking GRIN.(no issue posting)
Now how could i define the material type for material 100.
Thanks
Shobana

Hello Shobana,
If your client wants to post the same material some time as inventory material and some time non-inventory material then you need not to define any new material type, but this can be handled at transaction level.
- Create Material as normal material with MM01
1. When you want to stock this material in inventory :
Create the purchase order without any account assignment so when you receive material it will post to inventory account and you will be able to keep that as stock material
2. When you want to post this material in directly to cost account (direct consumption) :
Create the purchase order with account assignment (i.e. cost center, assets) so when you receive material it will directly post this material to cost account but not to inventory account and you will not be able to keep that as stock material
Hope this helps.
Regards
Arif Mansuri

How to pick packaging material

Hello,
I would like to pack material in delivery (VL01N), but Iw ould like to be able to pick the pack material.
I think I have to do some customizing....but do someone know how to do this?
Thanks and regards

Hi,
I have gone through your question ,what i understood is that you are looking for the configuration of packing here it is,
1.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-Define number ranges for handling units-T.code-VNKP
2.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-Packing control by item category-Here you have to go to your item category of material and assign the packing control.
3.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-Define requirements for packing in the delivery-Here we have to specify the requirement for packing when there is credit block existed.routine 112=packing.check whether this routine is existed or not.
4.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-define packing material types-here we define packing material types ex:v010 by which we can control packing maerial outputdetermination procedure(v00001) shipping unitprocedures000001,out put type(0001)shipping unit here other assignments are there gp through with it.
5.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-Define material group for packaging materails-for packaging materials item category isVERP.we can assign material group for the shipping material in the shipping tab in MM01.the shipping material group also assigned to the standard item that are to be packed.
6.IMG-LOGISTIC EXECUTION-SHIPPING-PACKING-define allowed packing material-here we assign allowed packing material types for material grou[ of packing materials-go to new entries -choose our packing material group-assign one packaging material type
7.Go to MM01-create materialwith material type packing (verp),base unit measure ,material group,assign packaging matrial group,assign packing material type in sales general plant tab and save it.
8.Go to again material assign and create material that to be packed and assign material group packing material make sure that in sales general p[lant tab material for packing material has been maintained and tax classification number also maintain save it.
9.go to MB1C and initialize stock.

Creation of new Material Type - Asset

Dear Friends,
Here as per my client requirement, i have to define new material type for Asset Material.
For this definition i need following info -
1) Views to be selected.
2) Which Price control indicator is to be set for the ASEET
Material Type? (V or S)
Thanks in Advance

Hi
Material type for asset - Copy ROH.
Maintain the views Basic data, Purcahsing, Accounting, Storage views (only if you have profit center accounting )
Price Control give it as a Moving average.

Defining Packaging Material Types

Similar Messages

Maybe you are looking for