Defining several paths and finding the shortest route
Ok, I need to write a program that is being used in the logistics department of a car company.
I was given:
- A database that contains information of parts
- A map that shows the hall where the parts are being installed
Purpose of application:
- The user wants to be able to enter the part number of a certain part and then see that part on the map
- The database I was provided with contains 3 locations per part:
Origin.
First stop.
Second (final) stop.
Upon selecting the part the user would like to inquire about, the 3 locations are shown on the map.
- This is where it gets tricky: I would like to create a dot which represents a fork lift driver that goes from the "Origin" to the "First stop" and finally to the "Second stop" of the part selected. Since there are so many routes on the map, I would like the program to identify the shortest route. How do I go about doing this?
Thank you.
DeV56
have a look at this:
http://en.giswiki.net/wiki/Dijkstra's_algorithm
Similar Messages
-
Hey guys,
Im working on a solution to this problem below is a program to allow a user to draw straight line paths. What i'd like to do is allow the user to select two points on the path he has drawn and find the shortest path among all the interesecting lines.....im going crazy thinking of a solution for this.....im thinking bout steeping down a notch and just try to find just any path first.
Will really appreciate any help.
Thnx in advance,
Vikhyat
import java.applet.*;*
*import java.awt.*;
import java.awt.event.*;*
*import javax.swing.*;
import java.awt.geom.*;
public class Lab11 extends Applet implements MouseListener, MouseMotionListener {
int x0, y0, x1, y1;
int mouseRelease=0;
GeneralPath path = new GeneralPath();
public Lab11()
addMouseListener(this);
addMouseMotionListener(this);
public void mouseDragged(MouseEvent e)
x1 = e.getX();
y1 = e.getY();
repaint();
public void mouseMoved(MouseEvent e) { }
public void mouseClicked(MouseEvent e) { }
public void mouseEntered(MouseEvent e) { }
public void mouseExited (MouseEvent e) { }
public void mousePressed(MouseEvent e) {
x0 = e.getX();
y0 = e.getY();
System.out.println("Mouse pressed at: (" +
x0 + ", " + y0 + ")" );
public void mouseReleased(MouseEvent e) {
x1 = e.getX();
y1 = e.getY();
System.out.println("Mouse released at: (" +
x1 + ", " + y1 + ")" );
mouseRelease = 1;
this.repaint();
public void paint(Graphics g)
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
//just for show not concerned with saving paths
if(mouseRelease==1)
path.moveTo(x0,y0);
path.lineTo(x1,y1);
mouseRelease = 0;
g2.setPaint(Color.RED);
g2.draw(path);
g.setColor(Color.BLACK);
g.drawLine(x0, y0, x1, y1);
public static void main(String[] argv)
JFrame f = new JFrame("Test");
f.getContentPane().add(new Lab11());
f.setSize(600,600);
f.setVisible(true);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}Pictorially this is what im trying to do:
User draws a path like so and selects two points as shown in blue
[http://i48.photobucket.com/albums/f236/theforrestgump/select.jpg]
The program should then proceed to highlighting the shortest path
[http://i48.photobucket.com/albums/f236/theforrestgump/sp.jpg]
Edited by: cannonball on Apr 1, 2008 7:58 PMimport java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
public class ShortPath extends JPanel {
Path2D.Double path;
Path2D.Double shortPath = new Path2D.Double();
Point p1 = new Point();
Point p2 = new Point();
final double PROXIMITY = 5.0;
public ShortPath() {
path = new Path2D.Double();
path.moveTo(145,80);
path.lineTo(125,170);
path.lineTo(190,200);
path.lineTo(240,340);
path.lineTo(285,220);
path.lineTo(145,80);
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.setPaint(Color.blue);
g2.draw(path);
g2.setPaint(Color.green);
g2.setStroke(new BasicStroke(2f));
g2.draw(shortPath);
g2.setPaint(Color.red);
g2.fill(new Ellipse2D.Double(p1.x-2, p1.y-2, 4, 4));
g2.setPaint(Color.orange);
g2.fill(new Ellipse2D.Double(p2.x-2, p2.y-2, 4, 4));
private void findShortPath() {
if(!isPointOnLine(p1) || !isPointOnLine(p2)) {
System.out.println("a point is not on the path");
return;
double d1 = getDistanceToPoint(p1);
double d2 = getDistanceToPoint(p2);
double pathLength = getDistanceToPoint(new Point());
Point2D.Double start = new Point2D.Double();
Point2D.Double end = new Point2D.Double();
if((d1 < d2 && d2 - d1 < pathLength - d2 + d1) ||
(d1 > d2 && d1 - d2 > pathLength - d1 + d2)) {
start.setLocation(p1);
end.setLocation(p2);
} else {
start.setLocation(p2);
end.setLocation(p1);
generatePath(start, end);
// 145,80
// leg distance = 92.2 125,170
// leg distance = 71.6 190,200 163.8
// leg distance = 148.7 240,340 312.5
// leg distance = 128.2 285,220 440.7
// leg distance = 198.0 145,80 638.7
private double getDistanceToPoint(Point p) {
PathIterator pit = path.getPathIterator(null);
double[] coords = new double[2];
double distance = 0;
Point2D.Double start = new Point2D.Double();
Point2D.Double end = new Point2D.Double();
Line2D.Double line = new Line2D.Double();
while(!pit.isDone()) {
int type = pit.currentSegment(coords);
switch(type) {
case PathIterator.SEG_MOVETO:
start.setLocation(coords[0], coords[1]);
pit.next();
continue;
case PathIterator.SEG_LINETO:
end.setLocation(coords[0], coords[1]);
line.setLine(start, end);
boolean onLine = line.ptSegDist(p) < PROXIMITY;
if(onLine) { // point is on this line
distance += start.distance(p);
break;
} else {
distance += start.distance(end);
start.setLocation(end);
pit.next();
return distance;
private void generatePath(Point2D.Double first, Point2D.Double second) {
Point2D.Double p = new Point2D.Double(first.x, first.y);
Point2D.Double start = new Point2D.Double();
Point2D.Double end = new Point2D.Double();
Line2D.Double line = new Line2D.Double();
boolean pathStarted = false;
for(int j = 0; j < 2; j++) {
PathIterator pit = path.getPathIterator(null);
double[] coords = new double[2];
while(!pit.isDone()) {
int type = pit.currentSegment(coords);
switch(type) {
case PathIterator.SEG_MOVETO:
start.setLocation(coords[0], coords[1]);
pit.next();
continue;
case PathIterator.SEG_LINETO:
end.setLocation(coords[0], coords[1]);
line.setLine(start, end);
boolean onLine = line.ptSegDist(p) < PROXIMITY;
if(onLine) { // found point on line
Point2D.Double linePt = getClosestPoint(line, p);
Line2D.Double segment;
if(!pathStarted) { // found first point
// both points on line
if(line.ptSegDist(second) < PROXIMITY) {
Point2D.Double secPt =
getClosestPoint(line, second);
segment = new Line2D.Double(linePt, secPt);
shortPath.append(segment, false);
return;
} else { // first point only
segment = new Line2D.Double(linePt, end);
shortPath.append(segment, false);
p.setLocation(second);
pathStarted = true;
} else { // found second point
segment = new Line2D.Double(start, linePt);
shortPath.append(segment, false);
return;
} else if(pathStarted) {
// add intermediate lines
Line2D.Double nextLine =
new Line2D.Double(start, end);
shortPath.append(nextLine, false);
start.setLocation(end);
pit.next();
private Point2D.Double getClosestPoint(Line2D.Double line,
Point2D.Double p) {
double minDist = Double.MAX_VALUE;
Point2D.Double closePt = new Point2D.Double();
double dy = line.getY2() - line.getY1();
double dx = line.getX2() - line.getX1();
double theta = Math.atan2(dy, dx);
double length = line.getP2().distance(line.getP1());
int limit = (int)(length+.05);
for(int j = 0; j < limit; j++) {
double x = line.getX1() + j*Math.cos(theta);
double y = line.getY1() + j*Math.sin(theta);
double distance = p.distance(x, y);
if(distance < minDist) {
minDist = distance;
closePt.setLocation(x, y);
return closePt;
private boolean isPointOnLine(Point p) {
Point2D.Double start = new Point2D.Double();
Point2D.Double end = new Point2D.Double();
Line2D.Double line = new Line2D.Double();
PathIterator pit = path.getPathIterator(null);
double[] coords = new double[2];
while(!pit.isDone()) {
int type = pit.currentSegment(coords);
switch(type) {
case PathIterator.SEG_MOVETO:
start.setLocation(coords[0], coords[1]);
pit.next();
continue;
case PathIterator.SEG_LINETO:
end.setLocation(coords[0], coords[1]);
line.setLine(start, end);
if(line.ptSegDist(p) < PROXIMITY) {
return true;
start.setLocation(end);
pit.next();
return false;
public static void main(String[] args) {
ShortPath test = new ShortPath();
test.addMouseListener(test.ml);
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.add(test);
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
private MouseListener ml = new MouseAdapter() {
boolean oneSet = false;
public void mousePressed(MouseEvent e) {
Point p = e.getPoint();
if(oneSet) {
p2 = p;
findShortPath();
} else {
p1 = p;
shortPath.reset();
oneSet = !oneSet;
repaint();
} -
I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original. On my iMac, I also have many folders containing some of the same photos. My computer is used for both personal and business purposes. My libraries should be separated, one for each.
To merge libraries use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - or Aperature
To find duplicates within an iPhoto library use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
Photos that are not in an iPhoto library can be imported telling iPhoto not to import duplicates (an imperfect procews) and then IPLM can find the duplicates
As to keeping seperate libraries - only you can do that - IPLM can move photos between libraries for you but only you can know which photos should be in which library
LN -
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps. -
How to debug and find the exact constraint violation error
{122712 14:22:36:ErrorCode -1 with ErrorMessage as ORA-00001: unique constraint (OPS$CMS.PK_TB_ML_EXER_UPLOAD) violated has occured for [SSO16063259009], [CMSCOST_USER] pk_xop_subsales.pr_process_exer }
{PROCEDURE pr_process_exer(
p_voucher_num tb_xop_order_manager_t.voucher_num%TYPE,
p_status_type tb_xop_order_manager_t.status_type%type,
p_dest tb_xop_order_manager_t.dest%type,
p_reference_key tb_xop_order_manager_t.reference_key%type,
p_seq_num tb_xop_order_manager_t.seq_num%type,
p_return_code tb_xop_order_manager_t.return_code%type,
p_reason_desc tb_xop_order_manager_t.reason_desc%type,
p_activity_qty tb_xop_order_manager_t.activity_qty%type,
p_leaves_qty tb_xop_order_manager_t.leaves_qty%type,
p_exec_price tb_xop_order_manager_t.exec_price%type,
p_current_status tb_xop_order_manager_t.current_status%type,
p_err_cur OUT ref_cursor)
IS
CURSOR get_order_dtls(v_voucher_num tb_xop_order_manager_t.voucher_num%type)
IS
SELECT *
FROM tb_xop_order_manager_t
WHERE voucher_num = v_voucher_num;
CURSOR get_mail_cd(v_opt_num OPTIONEE.opt_num%TYPE) IS
SELECT mail_cd, sp_mail_cd
FROM XOP_OPTIONEE
WHERE opt_num = v_opt_num;
cursor get_opt_dtls(v_opt_num OPTIONEE.opt_num%TYPE) IS
select
SUBSTR(trim(O.name_first) || ' ' || trim(O.name_mi) || ' ' ||
trim(O.name_last), 1, 35) p_name,
SUBSTR(O.address1, 1, 35) opt_addr1,
SUBSTR(O.address2, 1, 35) opt_addr2,
SUBSTR(O.address3, 1, 35) opt_addr3,
SUBSTR(O.address4, 1, 35) opt_addr4,
SUBSTR(O.address5, 1, 35) opt_addr5,
SUBSTR(O.address6, 1, 35) opt_addr6,
SUBSTR(trim(O.city) || ' ' || trim(O.state) || ' ' ||
trim(O.zip) || ' ' || trim(O.country), 1, 35) city_state_zip_country,
trim(O.city) city,
trim(O.state) state,
trim(O.zip) zip,
trim(O.country) country
from optionee o
where o.opt_num = v_opt_num;
--CQ:PCTUP00210726- Added wire instructions audit for deleted wire info.
CURSOR c_wire_instruction (
in_wire_seq_no TB_XOP_WIRE_INSTRUCTIONS.wire_seq_no%TYPE ) IS
SELECT ml_brok_acct_num,
ssn,
plan_num,
instr_type,
aba_routing_num,
swift_routing_code,
bank_name,
bank_acct_num,
name_on_account,
bank_addr_1,
bank_addr_2,
bank_addr_3,
city,
state,
country,
zip,
bank_ident_num,
addtl_info
FROM TB_XOP_WIRE_INSTRUCTIONS
WHERE wire_seq_no = in_wire_seq_no
UNION
SELECT ml_brok_acct_num,
ssn,
plan_num,
instr_type,
aba_routing_num,
swift_routing_code,
bank_name,
bank_acct_num,
name_on_account,
bank_addr_1,
bank_addr_2,
bank_addr_3,
city,
state,
country,
zip,
bank_ident_num,
addtl_info
FROM TB_XOP_WIRE_INSTRUCTIONS_AUDIT
WHERE wire_seq_no = in_wire_seq_no;
CURSOR c_order_qty IS
SELECT order_qty
FROM tb_xop_order_manager
WHERE voucher_num = p_voucher_num;
v_order_qty tb_xop_order_manager.order_qty%TYPE;
v_wire_instruction c_wire_instruction%ROWTYPE;
v_order_dtls get_order_dtls%rowtype;
v_opt_dtls get_opt_dtls%rowtype;
v_settle_dt tb_ml_exer_upload.settle_dt%type;
v_cusip_num corp.cusip_num%type;
v_err_cd number(12):=0;
v_err_msg varchar2(4000);
v_compy_nme tb_fc_Compy.compy_nme%type;
v_ml_sec_num tb_fc_compy.ml_sec_num%type;
v_mail_cd xop_optionee.mail_cd%type;
v_count1 PLS_INTEGER := 0;
v_sum_activity_qty tb_xop_order_manager_t.activity_qty%TYPE;
v_transact_no PLS_INTEGER;
v_ivr_plan_num tb_fc_compy.ivr_plan_num%TYPE;
wait_for_more EXCEPTION;
exceeds_order_qty EXCEPTION;
--Added for CQ# PCTUP00481233
v_sub_totfee number;
v_sub_fixedfee1 number;
v_sub_fixedfee2 number;
v_sub_fixedfee3 number;
v_sub_secfee number;
v_sub_feenum number;
--Added for CQ# PCTUP00481233
v_fixedfee1 tb_xop_order_manager_t.fixed_fee1%TYPE; --SPIF# 43161- variable to hold fixed fee1
BEGIN
OPEN c_order_qty;
FETCH c_order_qty INTO v_order_qty;
CLOSE c_order_qty;
dbms.output.put_line('completed1');
IF v_order_qty <> p_activity_qty THEN
dbms.output.put_line('completed2');
IF p_status_type = 'EO' AND v_order_qty < p_activity_qty THEN
RAISE exceeds_order_qty;
dbms.output.put_line('completed3');
ELSIF p_status_type = 'EO' AND v_order_qty > p_activity_qty THEN
-- Partial Execution
INSERT INTO tb_xop_hold_multi_orders
( voucher_num
, reference_key
, seq_num
, return_code
, reason_desc
, status_type
, activity_qty
, leaves_qty
, exec_price
, current_status
, waiting
,activ_dt )
VALUES
( p_voucher_num
, p_reference_key
, p_seq_num
, p_return_code
, p_reason_desc
, p_status_type
, p_activity_qty
, p_leaves_qty
, p_exec_price
, p_current_status
, 'Y'
,SYSTIMESTAMP );
dbms.output.put_line('completed4');
ELSE
IF p_status_type = 'BE' THEN
SELECT COUNT(1) INTO v_count1
FROM tb_xop_hold_multi_orders
WHERE voucher_num = p_voucher_num;
dbms.output.put_line('completed5');
IF v_count1 > 0 THEN
INSERT INTO tb_xop_hold_multi_orders
( voucher_num
, reference_key
, seq_num
, return_code
, reason_desc
, status_type
, activity_qty
, leaves_qty
, exec_price
, current_status
, waiting
,activ_dt)
VALUES
( p_voucher_num
, p_reference_key
, p_seq_num
, p_return_code
, p_reason_desc
, p_status_type
, (-1) * p_activity_qty
, p_leaves_qty
, p_exec_price
, p_current_status
, 'Y'
,SYSTIMESTAMP );
UPDATE tb_xop_hold_multi_orders
SET waiting = 'Y'
WHERE voucher_num = p_voucher_num;
dbms.output.put_line('completed6');
END IF;
END IF;
END IF;
dbms.output.put_line('completed7');
SELECT SUM(NVL(activity_qty,0)) INTO v_sum_activity_qty
FROM tb_xop_hold_multi_orders
WHERE waiting = 'Y'
AND voucher_num = p_voucher_num;
IF v_sum_activity_qty > 0 THEN
IF v_sum_activity_qty <> v_order_qty THEN
RAISE wait_for_more;
ELSE
-- final order in the partial execution; complete the process
UPDATE tb_xop_hold_multi_orders
SET waiting = 'N'
, process_dt = SYSDATE
WHERE voucher_num = p_voucher_num;
END IF;
END IF;
END IF;
UPDATE tb_xop_order_manager_t
SET activ_dt = TO_CHAR( SYSDATE, 'YYYY-MM-DD HH24:MI:SS' ) || '.000'
, dest = p_dest
, reference_key = p_reference_key
, seq_num = p_seq_num
, return_code = p_return_code
, reason_desc = p_reason_desc
, status_type = p_status_type
, activity_qty = v_order_qty --p_activity_qty
, leaves_qty = 0 --p_leaves_qty
, exec_price = p_exec_price
WHERE voucher_num = p_voucher_num;
dbms.output.put_line('completed8');
* SPIF# 43161- Update of current status to PO moved at the end, same as how PROD works.
IF (p_status_type = 'EO') THEN
BEGIN
select cusip_num
into v_cusip_num
from corp;
EXCEPTION
WHEN NO_DATA_FOUND THEN
SELECT cusip_num
INTO v_cusip_num
FROM tb_xop_espp_compy
WHERE compy_acronym = replace(replace(user,'CMS'),'_USER');
WHEN OTHERS THEN
NULL;
END;
select compy_nme,ml_sec_num, ivr_plan_num
into v_compy_nme,v_ml_sec_num, v_ivr_plan_num
from tb_fc_compy
where compy_acronym = replace(replace(user,'CMS'),'_USER')
UNION ALL
select compy_nme, je_ml_security_number, ivr_plan_num
from tb_xop_espp_compy
where compy_acronym = replace(replace(user,'CMS'),'_USER');
-- where ivr_plan_num = replace(substr(p_voucher_num,1,7),'SSO','XOP');
open get_order_dtls(p_voucher_num);
FETCH get_order_dtls INTO v_order_dtls;
v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_order_dtls.exer_date + 1));
v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_settle_dt + 1));
v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_settle_dt + 1));
FOR c_mail_cd IN get_mail_cd(v_order_dtls.opt_num)
LOOP
v_mail_cd := c_mail_cd.mail_cd;
-- Do we need to get sp_mail_cd and overlay with the sp_mail_cd in order_manager_t???
END LOOP;
OPEN get_opt_dtls(v_order_dtls.opt_num);
FETCH get_opt_dtls INTO v_opt_dtls;
CLOSE get_opt_dtls;
v_fixedfee1 := nvl(v_order_dtls.fixed_fee1, 0);
* SPIF# 43161- atleast one handling fee per day of transaction
v_fixedfee1 := pk_xop_enh_exerupdate.chrg_tranxfixed_fee(v_fixedfee1,
v_order_dtls.symbol,
v_order_dtls.corp_acronym,
v_order_dtls.opt_num);
--Insert into tb_ml_exer_upload
--Added for CQ# PCTUP00481233
Pk_Xop_Transactmodel.GET_FEE(v_order_dtls.GROUP_ID,v_order_dtls.SVC_ID,'SQ',v_order_dtls.opts_exer,
round(v_order_dtls.exec_price, 4),v_sub_totfee,v_sub_fixedfee2,v_sub_fixedfee1,
v_sub_fixedfee3,v_sub_secfee,v_sub_feenum,lpad(v_order_dtls.ssn,9,0));
v_order_dtls.sec_fee:=v_sub_secfee;
UPDATE tb_xop_order_manager_t
SET sec_fee=v_sub_secfee
WHERE voucher_num = p_voucher_num;
dbms.output.put_line('completed8');
--- End CQ # PCTUP00481233
INSERT INTO tb_ml_exer_upload
(exer_num,exer_seq,
exer_dt, written_flag, backout_flag, output_line,
je_flag, opts_exer,
tot_tax,shrs_sold,comm_value,tot_fee,
mkt_prc,exer_type, soc_sec,
name_first, name_mi,
name_last,check_addr_1,check_addr_2,check_addr_3,
check_addr_4,check_addr_5,city,state,zip,country,
city_state_zip_country,
p_name,opt_addr1,opt_addr2,opt_addr3,opt_addr4,
opt_addr5,opt_addr6,
settle_dt,send_to_citibank_flag,
dom_chek_distr,foreign_currency_code,
distribution_method,wire_seq_no,
cusip_num, ml_retail_account,multi_curr_handling_fee,
ml_sec_num, corp_name,upd_optionee_addr,
outbound_flag, -- make it N
corp_symbol,taxwire_approve, -- make it not applicaplabe
exersource,
mail_cd, sp_mail_cd,
backup_withholding,
user_id,
acct_num_othr)
VALUES(v_order_dtls.exer_num,0,v_order_dtls.exer_date,'N','N',NULL,
-- PG 12/12/05 Changed to populate the je_flag based on dom_chek_distr 'D',
-- PG 12/16/05 JE should not be generated for international checks.. So 'Y' always
'Y', --je_flag
v_order_dtls.opts_exer,0,--total tax will be 0.
v_order_dtls.opts_exer, --shrs_sold,
v_order_dtls.comm_value,
--SPIF# 43161- replaced nvl(v_order_dtls.fixed_fee1, 0) with v_fixedfee1
v_fixedfee1 + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0), --v_order_dtls.fees_amt,
round(v_order_dtls.exec_price, 4),v_order_dtls.exer_type,
LPAD(v_order_dtls.ssn,9,'0'), --v_order_dtls.ssn, Modified by Suresh on 02/08/07 for SPIF # 37210
v_order_dtls.name_first,v_order_dtls.name_mi,v_order_dtls.name_last,
v_order_dtls.check_addr_1,v_order_dtls.check_addr_2,v_order_dtls.check_addr_3,
v_order_dtls.check_addr_4,v_order_dtls.check_addr_5,nvl(v_order_dtls.city,v_opt_dtls.city),
nvl(v_order_dtls.state,v_opt_dtls.state),nvl(v_order_dtls.zip,v_opt_dtls.zip),
nvl(v_order_dtls.country,v_opt_dtls.country),
SUBSTR(nvl(v_order_dtls.city||v_order_dtls.state||v_order_dtls.zip||v_order_dtls.country,
v_opt_dtls.city_state_zip_country),1,34), -- COLUMN LENGTH MAX IS 35
v_opt_dtls.p_name,v_opt_dtls.opt_addr1,v_opt_dtls.opt_addr2,v_opt_dtls.opt_addr3,
v_opt_dtls.opt_addr4,v_opt_dtls.opt_addr5,v_opt_dtls.opt_addr6,
v_settle_dt,decode(v_order_dtls.distribution_method,'W','Y','D','Y','C','Y','D'),
v_order_dtls.dom_chek_distr,v_order_dtls.foreign_currency_code,
v_order_dtls.distribution_method,v_order_dtls.wire_seq_no,
v_cusip_num,v_order_dtls.acct_num,v_order_dtls.multi_curr_handling_fee,
-- nvl(fn_get_sec_num(replace(substr(p_voucher_num,1,7),'SSO','XOP'),v_order_dtls.symbol),v_ml_sec_num),
nvl(fn_get_sec_num(v_ivr_plan_num, v_order_dtls.symbol),v_ml_sec_num),
v_compy_nme,v_order_dtls.upd_optionee_addr,
'N', --'N' is for outbound flag.
v_order_dtls.symbol,'D', --'D' for taxwires disabled
'S', -- 'S' for source being subsequent sale.
v_mail_cd, --need to get mail_Cd??
v_order_dtls.sp_mail_cd,v_order_dtls.backup_withholding,
user,v_order_dtls.acct_num_othr);
IF (NVL(v_order_dtls.wire_seq_no,0) > 0) THEN
OPEN c_wire_instruction(v_order_dtls.wire_seq_no);
FETCH c_wire_instruction INTO v_wire_instruction;
CLOSE c_wire_instruction;
INSERT INTO TB_XOP_TRANSACT_WIRE_INSTR
(user_id, exer_num, wire_seq_no, ml_brok_acct_num, ssn,
plan_num, instr_type, aba_routing_num,
swift_routing_code, bank_name, bank_acct_num,
name_on_account, bank_addr_1, bank_addr_2, bank_addr_3,
city, state, country, zip, bank_ident_num, addtl_info )
VALUES
(USER,v_order_dtls.exer_num, v_order_dtls.wire_seq_no,
v_wire_instruction.ml_brok_acct_num, v_wire_instruction.ssn,
v_wire_instruction.plan_num, v_wire_instruction.instr_type, v_wire_instruction.aba_routing_num,
v_wire_instruction.swift_routing_code, v_wire_instruction.bank_name, v_wire_instruction.bank_acct_num,
v_wire_instruction.name_on_account, v_wire_instruction.bank_addr_1, v_wire_instruction.bank_addr_2,
v_wire_instruction.bank_addr_3, v_wire_instruction.city, v_wire_instruction.state, v_wire_instruction.country, v_wire_instruction.zip,
v_wire_instruction.bank_ident_num, v_wire_instruction.addtl_info);
dbms.output.put_line('completed10');
END IF;
/* PG 01/05/06 Call the check conversion only for international checks and wires */
IF v_order_dtls.dom_chek_distr = 'N' AND v_order_dtls.distribution_method IN ('W', 'D', 'C') THEN
/* PG 12/20/05 To process subsequent sales with wire or foreign currency distribution */
v_transact_no := 88;
pk_xop_citibank_forex.pr_cashconversion_ins_request( v_order_dtls.acct_num
, LPAD(v_order_dtls.ssn,9,'0') --v_order_dtls.ssn, Modified by Suresh on 02/15/07 for SPIF # 37210
, v_order_dtls.distribution_method
, v_order_dtls.foreign_currency_code
, v_order_dtls.wire_seq_no
, ROUND((v_order_dtls.opts_exer * round(v_order_dtls.exec_price, 4)),2)
- ROUND(v_order_dtls.comm_value,2)
- ROUND(nvl(v_order_dtls.fixed_fee1,0) + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0),2)
- nvl(v_order_dtls.multi_curr_handling_fee,0)
- nvl(v_order_dtls.backup_withholding,0) -- net proceeds
, v_order_dtls.multi_curr_handling_fee --handling fee
--Modified by Bhaskar/Suresh on 03/02/2006 --, v_order_dtls.login_name
, CASE v_order_dtls.login_name WHEN 'CLIENT/' THEN v_order_dtls.login_name||'SSO' ELSE v_order_dtls.login_name||'/SSO' END
, v_transact_no -- transact_no as place holder for exer_type 88
, v_order_dtls.check_addr_1
, v_order_dtls.check_addr_2
, v_order_dtls.check_addr_3
, v_order_dtls.check_addr_4
, v_order_dtls.upd_optionee_addr
, v_order_dtls.city
, v_order_dtls.state
, v_order_dtls.zip
, v_order_dtls.country
, v_order_dtls.login_ipaddress
, v_order_dtls.fcnum
, v_order_dtls.opt_num
, v_settle_dt,
p_exer_num => v_order_dtls.exer_num
END IF;
COMMIT;
close get_order_dtls;
END IF;
* SPIF# 43161- Update to current status into PO is moved to this part, same as PROD.
UPDATE tb_xop_order_manager_t
SET exec_dttime = decode(p_status_type,'EO',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),null)
, exer_date = TRUNC(SYSDATE)
, cancel_dttime = decode(p_status_type,'CX',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),'UR',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),null)
, current_status = 'PO'
, sum_status = decode(p_status_type,'EO','X','C')
, sum_stat_dttime = SYSDATE
WHERE voucher_num = p_voucher_num;
v_err_cd := sqlcode;
v_err_msg := sqlerrm;
open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
EXCEPTION
dbms.output.put_line('completed200');
/* PG 02/10 handled 'partial fill order' exception */
when wait_for_more then
v_err_cd := 0;
v_err_msg := 'ORA-0000: normal, successful completion';
pr_xop_log_errors('Partially filled; Waiting for more - Activity qty:' || to_char(v_sum_activity_qty)|| ' pk_xop_subsales.pr_process_exer');
open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
when exceeds_order_qty then
v_err_cd := sqlcode;
v_err_msg := sqlerrm;
open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
pr_xop_log_errors('Activity quantity exceeded the Order_qty - Activity qty: ' || to_char(p_activity_qty) || ' pk_xop_subsales.pr_process_exer');
when others then
v_err_cd := sqlcode;
v_err_msg := sqlerrm;
open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
pr_xop_log_errors('ErrorCode '||SQLCODE||' with ErrorMessage as '||SQLERRM||' has occured for '||user||'pk_xop_subsales.pr_process_exer');
dbms.output.put_line('completed125');
END pr_process_exer;
Hi friends, any1 help me out how to define the ref-cursor in declaration section, and how to find at what situation the constraint error occurred..956684 wrote:
Hi,.
Friends plz help me out ..how to debug and find the exact position of the constraint violation..thank you for the help..There isn't a way to trace it unless you have caught the exception raised.
As a way to start the debug, you will have to monitor
1. All DML's against the Table on which you have constraint. More specifically, the DML's that act on the column you have constraint on.
2. Use Exception Handling, to log the Error and the data that causes the constraint to fail.
3. Do not forget to monitor the Triggers, if they are used, that would write some data into the column you have constraint on.
Or
Another way to trace is:
select *
from user_source
where lower(text) like '%your_table_name%';
order by type, name, line;Look at the lines, exclude that are in Declaration or in SELECT statements and target the DML's.
Looking at the un-formatted code you posted, this statement looks like a culprit.
INSERT INTO tb_ml_exer_upload
(exer_num,exer_seq,
exer_dt, written_flag, backout_flag, output_line,
je_flag, opts_exer,
tot_tax,shrs_sold,comm_value,tot_fee,
mkt_prc,exer_type, soc_sec,
name_first, name_mi,
name_last,check_addr_1,check_addr_2,check_addr_3,
check_addr_4,check_addr_5,city,state,zip,country,
city_state_zip_country,
p_name,opt_addr1,opt_addr2,opt_addr3,opt_addr4,
opt_addr5,opt_addr6,
settle_dt,send_to_citibank_flag,
dom_chek_distr,foreign_currency_code,
distribution_method,wire_seq_no,
cusip_num, ml_retail_account,multi_curr_handling_fee,
ml_sec_num, corp_name,upd_optionee_addr,
outbound_flag, -- make it N
corp_symbol,taxwire_approve, -- make it not applicaplabe
exersource,
mail_cd, sp_mail_cd,
backup_withholding,
user_id,
acct_num_othr)
VALUES(v_order_dtls.exer_num,0,v_order_dtls.exer_date,'N','N',NULL,
-- PG 12/12/05 Changed to populate the je_flag based on dom_chek_distr 'D',
-- PG 12/16/05 JE should not be generated for international checks.. So 'Y' always
'Y', --je_flag
v_order_dtls.opts_exer,0,--total tax will be 0.
v_order_dtls.opts_exer, --shrs_sold,
v_order_dtls.comm_value,
--SPIF# 43161- replaced nvl(v_order_dtls.fixed_fee1, 0) with v_fixedfee1
v_fixedfee1 + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0), --v_order_dtls.fees_amt,
round(v_order_dtls.exec_price, 4),v_order_dtls.exer_type,
LPAD(v_order_dtls.ssn,9,'0'), --v_order_dtls.ssn, Modified by Suresh on 02/08/07 for SPIF # 37210
v_order_dtls.name_first,v_order_dtls.name_mi,v_order_dtls.name_last,
v_order_dtls.check_addr_1,v_order_dtls.check_addr_2,v_order_dtls.check_addr_3,
v_order_dtls.check_addr_4,v_order_dtls.check_addr_5,nvl(v_order_dtls.city,v_opt_dtls.city),
nvl(v_order_dtls.state,v_opt_dtls.state),nvl(v_order_dtls.zip,v_opt_dtls.zip),
nvl(v_order_dtls.country,v_opt_dtls.country),
SUBSTR(nvl(v_order_dtls.city||v_order_dtls.state||v_order_dtls.zip||v_order_dtls.country,
v_opt_dtls.city_state_zip_country),1,34), -- COLUMN LENGTH MAX IS 35
v_opt_dtls.p_name,v_opt_dtls.opt_addr1,v_opt_dtls.opt_addr2,v_opt_dtls.opt_addr3,
v_opt_dtls.opt_addr4,v_opt_dtls.opt_addr5,v_opt_dtls.opt_addr6,
v_settle_dt,decode(v_order_dtls.distribution_method,'W','Y','D','Y','C','Y','D'),
v_order_dtls.dom_chek_distr,v_order_dtls.foreign_currency_code,
v_order_dtls.distribution_method,v_order_dtls.wire_seq_no,
v_cusip_num,v_order_dtls.acct_num,v_order_dtls.multi_curr_handling_fee,
-- nvl(fn_get_sec_num(replace(substr(p_voucher_num,1,7),'SSO','XOP'),v_order_dtls.symbol),v_ml_sec_num),
nvl(fn_get_sec_num(v_ivr_plan_num, v_order_dtls.symbol),v_ml_sec_num),
v_compy_nme,v_order_dtls.upd_optionee_addr,
'N', --'N' is for outbound flag.
v_order_dtls.symbol,'D', --'D' for taxwires disabled
'S', -- 'S' for source being subsequent sale.
v_mail_cd, --need to get mail_Cd??
v_order_dtls.sp_mail_cd,v_order_dtls.backup_withholding,
user,v_order_dtls.acct_num_othr);What is the Table structure of tb_ml_exer_upload and what columns do you have constraints on?
Which column of the table tb_ml_exer_upload is your Primary Key (because constraint name mentions pk_tb_ml_exer_upload)?
Edited by: Purvesh K on Jan 4, 2013 12:57 PM -
Finds the correct route schedule
Master data : Route scheduling transaction VL51 and VL52
The customer is linked to 2 route schedules with different goods issue dates :
Every monday at 10 AM
Every thursday at 3 PM
In the sales order, when you enter a first delivery date, R/3 finds the correct route schedule and calculates precisely the goods issue date according to the customer delivery date.
If you change the delivery date in the sales order item (option: edit/fast change of /delivery date), R/3 does not determine a new route schedule and stays with the first one.In my personal opinion, you can have any certifications you want but if you can't/don't pass the "practical exam" that we've set up as part of a candidate's interview process then you're out.
In my present job, I've seen so many candidates applying for jobs with CCNA, CCNP and CCIE "certification". The very minute we informed them that part of the interview process is a "practical exam" involving configuration of some routers and switches ... these so-called "certified" candidates back out. -
I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/
With the selection you could do a copy paste and use the histogram of the new layer set the histogram source to selected layer. The eye dropper sample size may also to get the average of a square area around a point.
-
Satellite L300 - After XP installation it can't find the WiFi router
After insatlling XP SP1 and insatlling many drivers all except for WLAN works. I did install the drivers and i did install Atheros for managing my connections, but It seems not to even find the wifi router.
I'm using toshiba satellite l300 pslbce.
PS! I had the laptop running on Ubuntu berfore, worked fine.Yes, installing SP2 is very important on newer laptops since so much changed from SP1 to SP2
Here is some info found on Wiki:
SP2 added new functionality to Windows XP, including an enhanced firewall, *improved Wi-Fi support*, such as WPA encryption compatibility, with a wizard utility, a pop-up ad blocker for Internet Explorer 6, and Bluetooth support.
http://en.wikipedia.org/wiki/Windows_XP#Service_Pack_2
Going from SP2 to SP3 is not a big step, but since SP3 is basically a compilation of hotfixes since SP2, you should install SP3 as well for security reasons. -
My HP Photosmart C309a series printer can't find the wireless router 3 feet above it.
My HP Photosmart C309a series printer can't find the wireless router 3 feet above it. I ran the diagnostics and got "The wireless radio is not functioning" message. In what device is the wireless radio located? In the router? In the printer? I reset the router, did the #6 with the printer, but I am still unable to connect my wireless Macbook to the printer. My desktop Mac is connected to the printer with a cable and prints fine. Is my router messed up or my printer?
This question was solved.
View Solution.Just call HP, they can walk you through the options based on what is wrong with your printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do this now?
Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter? -
How do I search and find the latest albums of a particular genre (Circuit)?
Hello,
I'm new to iTunes and the music I want to buy is Circuit Party (House).
All I want to do is log on and search for and find the latest Circuit Party music albums. Unfortunately, sometimes I will do a search and a song and its album will show up, but the album is not appearing in the "New and Noteworthy" section, even though it is a new release.
What I have been doing as a workaround is to visite another site which has the latest Circuit music albums and then switching back to iTunes Store to search for each specific album. This is a slow process and a pain!
I figure I must not be doing something right with the iTunes store, so if you can tell me the best way to find my music, I would really appreciate it!
Thanks!Hi Tom,
As I can see from what you posted, this correction seems a program correction. You can use SNOTE transaction to apply it. Just download the OSS Note and apply it. The transaction it's pretty simple to use.
Otherwise if you don't have SNOTE installed you can find them in the following places:
SELECT_STATE_FOR_CONDTAB_BUILD - This is a function you should find this through the se37.
Hope it helps.
Regards,
Gilberto Li -
When typing I will sometimes look at the document and find the curser moved. The typing has been happening in the wrong place. How do I stop the curser movement while typing?
You're not the only person asking this question. You might want to read this post, which contains possible solutions, and references support documents:
https://discussions.apple.com/thread/2322020?start=0&tstart=0
Others have the same question as you. Post here if this information answered your question; post also if you have any additional questions! -
How do I get rid of all the Itunes store ads on my Iphone? And find the playlist I just "synched" in I-tunes?
Uninstalling and reinstalling iTunes does not create duplicates.
Only the user importing content multiple times creates duplicates.
Delete the duplicates and stop importing the same content multiple times. -
Read Text row by row, plot them and find the max of its Power spectrum
Hi, everyone,
I have to read data from a text file, plot as a time serie and find the frequency to its max power spectrum. I found a previous post related to my issue so I revised his example a little bit. But once I decide to store the data into an array, the Labview reported:' Error 1 occurred at Scan From String (arg 1)'. Can anyone help me out?
Thanks in Advance!
Gab
Attachments:
ReadXYZmine.vi 18 KBAgain my attachment got missed out.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
ReadXYZmine_Trim Whitespaces.vi 19 KB -
Can't download server2.02 and find the Serial Number
"VMware Server has reached End of Support"
NOW, I can't download server2.02 and find the Serial Number, But Web says :
Will I still be able to
download VMware Server 2 from the website?
VMware Server 2 will remain available for download, unsupported and “as-is”,
from the VMware website until further notice.
Will I still need to register
and download keys to download VMware Server 2?
Yes, keys are still needed to enable VMware Server.
see :VMware Server, Free Virtualization Download for Virtual Server ConsolidationNot sure what page to which you're referring but try this one:
https://supportprofile.apple.com/
Maybe you are looking for
-
Don't want to use my flash as a slave.
I want to use my 430 ex ii on my Canon 7D mk ii, can I disable my pop up flash forever?
-
How do I prohibit skipping a chapter in Encore CS6?
Background: I'm used to authoring in Scenarist, so I am used to certain functions, like NOPS. What I am working on is a concert DVD. My usual flow is PG entry goes to an FBI copyright warning. This is NOP'ed for a 10 second display. The NOP prevents
-
Somebody please help. I've been trying to purchase Logic Pro for the longest time and my App Store keeps saying, Error try again later. It's really bothering me. I need Logic Pro immediately and the App Store refuses to cooperate with me.
-
Cant Print From Blackberry playbook
When I send a document from my blackberry playbook to my HP D110A all in one printer it shows up as spam or contains a virus a virus ? but I can send the same message from lap top or blackberry phone and the printer prints. Documents have been scann
-
How to change checking rule in SD
Hello Experts, I am new to SD. i want to change checking rule for sales order from A to B in customizing. Please let me know how to change checking rule for sales order. Thanks in advance. Best regards, Sai