Defining the Target Source System
Hi gurus,
I have a question ?
I have SAP BW 7.3 SP 10 If I have this version is necessary configure the conversion logical system names in the Transport Connection ?
I do not idea if yes or not?
Thank for you help.
Best regards.
Andres Bermudez
Hi Andres,
yes you have to mantain the usual table with systems transaltion after the import. RSA1 CTRL+F12
In addition you could restrict the transaltion only for objects in version 7.x
Luca
Similar Messages
-
G/L account picked for the "wrong" source system entry
Dear Experts,
in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
What can be the reason for the picking of the G/L account from the wrong source system?
Can the note 1357871 bring the correction?
Thank you very much!Hello Dima,
I think your problem comes from your source system for product category management.
Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
If it does not work, log an OSS message.
If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
Then, your customized G/L account definition for product category and account assignment category should be OK.
Regards.
Laurent. -
Unable to 'set the default source system' to Install Business Content
Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P -
How to retreive logical name for the OLAP source system
dear all, i am writing an extractor for a data source and need to fetch the OLAP SOURCE SYSTEM (r3 backend) for it.
obviously in RSA1, you can see the source system of the data source, however, i have debugged this and could not find the function or class that puts the source system in the field.
in short i have the data source, and i know i want it to be the active version, so how can i get the olap source system of this ?
thanks
glen
Edited by: gingle on Dec 2, 2008 10:22 PMTry tcode SM59. I am locked out of the transaction at this client, so I can't give you any more details.
You can also look at the source system in RSA1 ... go to the source systems tab and change it.
Both of these steps are typically basis steps, so i would advise you to be cautious when doing anything in either of those screens.
Brian -
How do I register as a developer in the Online Source System?
Im trying to add an ABAP program to SAP BW, and I get this message:
You are not registered as a developer.
Please register in the Online Source System (OSS).
In the OSS you will receive an access key.
I have no idea what this means. How do access the OSS and do this? I have done various searches on SAP's site and I've not found anything useful.
Is there any shortcut I can use to get this access key and proceed with work? I'm on a tight deadline?> Well , you should speak to your Team Lead and request for ABAP Developer Access Key.
> Your Tem Lead will request BASIS guys to generate an Access Key for you.
> Once you receive your access key, try to create a program in SE38 > It will prompt you to enter Access Key. > enter the generated access key and continue.
Cheers
Praveen -
Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
ThanksHi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks. -
Define multi development source systems
Good Day;
I am trying to figure out how to define more that one source system in Solman (ChaRM). Let me explain
Regular Corrections, all development is done in DW3 Client 100. (Production Stream)
Urgent Corrections, all development is done in DW4 Client 100 . (Emergency Stream)
Training Corrections, all development is done in DW3 Client 400 (Training Stream)
Regards
DonHi,
I have done this approach mentioned by Jason more than once. You create as many logical components as you need, each one having the different dev system and the QAS and Prod system (and also other system roles if needed, like verification or post-processing systems ).
How is your landscape? Do you have only one Test client and one Productive client or many? That influences how to create the system/client routes.
You have also to define if you want to have different maintenance projects or keep all logical components in the same. In my cases I had different maintenance projects. If the Production Ibase for all is the same, the system will ask you to choose which maintenance cycle to use.
Regards,
Raquel Cunha. -
Start Routine to populate the Logical Source System
Hi Friends please help me with the below
1. <b>Requirement</b> : to Populate The system Date , Source System
in BI for Each load request.
<b>
1 Solution:</b> I thought of writing the Start Routine for this but it is giving me error
syntax Error: END METHOD MISSING?????
2. Also I have requirement to populate 0sourcsys source system id, can any body help how to populate that.
Thanks
Poonam Roy
<b>ABAP Code.</b>
I have the End Method. what more to do.
METHOD start_routine.
*=== Segments ===
FIELD-SYMBOLS:
<SOURCE_FIELDS> TYPE tys_SC_1.
DATA:
MONITOR_REC TYPE rstmonitor.
<b>
$$ begin of routine - insert your code only below this line -</b>
... "insert your code here
<b>
FORM STARTROUTINE
USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TRANSTRU
ABORT LIKE SY-SUBRC.
DATA: ZLOAD_DAT LIKE SY-DATUM
ZZSOURSYS TYPE RSLOGSYS
IF G_S_MINFO-DATAPAKID=1
SOURCE_FIELDS-ZLOAD_DAT = SY-DATE.
SOURCE_FIELDS-ZZSOURSYS = G_S_MINFO-LOGSYS.
ENDIF.
ABORT = 0.
ENDFORM.
ENDMETHOD.
ENDCLASS</b>.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD.Hi,
Check whether the formula is useful here than Routine. Because you can see the Sy-datum , source system( I Guess) fields as avaialable formula elements .
With rgds,
Anil Kumar Sharma .P -
How to change the ECC Source system in SAP BI
Dear Experts,
In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
Now in my BI system I want to change the source system from ECC Production to ECC development.
Kindly explain me step by step to change the source system from ECC Production to ECC development.
Regards,
Suresh.Hi,
Ask your basis team to change source system entries.
They knows how to assign logical mappings.
Tx - BDLS.
Tables - RSLOGSYSMAP.
Try this way.
Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
Thanks -
Datasources . problem with the new Source System
Hi friends!
The ECC client were copy and now I have a new source system for this.
If I select source system / verify, the msg is: ok
In can read some data from the new ECC (ie: exchange rates updated), but I can not read any records using the datasources.
The replication in Bi were done, and the data in source system is ok.
-> What is wrong?
Thanks!Check the profile parameters in WE20,We21... and also check scc4
-
Transfer rules to the new source system not visible in Transport connection
Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
SrinivasI think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda -
Defining the 3rd party system in sld ?
Hi Guys,
I have defined a 3rd party system in sld. How to add the products and swc to that 3rd party system. ? It can be anything or it has to be same as in the 3rd party system.
How to check whether this system is able to interact with PI properly. ?
Thanks,
srini>>How to add the products and swc to that 3rd party system. ?
You need to do this from Technical system page in SLD. Find the tab <b>Installed Products</b>.
Regards,
Jai Shankar -
How to define the "target group" in STMS?
Experts:
We have a ECC landscapes with many clients on DEV and QAS.
The previous basis admin created 2 target groups at STMS.
The first TARGET GROUP has both DEV and QAS clients as the target systems in its definition.
The second TARGET GROUP has only the QAS clients as the target systems--so many QAS clients show up in both Target GROUPS.
Could you help explain why we need the second TARGET GROUP since all target systems in the second TARGET GROUP already show up in the first TARGET GROUP.
Thanks a lot!The second TARGET GROUP that has only the QAS clients can be used where a transport only needs to be send to QA systems/clients and not to Dev clients.
An example would be client independent objects, you don't need to move them to rest of the Dev clients but need to be moved to QA.
Hope this helps
Thanks,
Naveed -
How to handle the online source system in ETL
Hi gurus,
I have a source table which changes very dynamically
For ex :
Lets say source Table A has 10 million records set which I am trying to insert/update via OWB in staging table(takes fifteen minutes to insert/update them).
During these fifteen minutes of processing ,the existing source table records gets updated and some new records get inserted
How do i identify/ handle such a situation of loading the data on to staging with an online source.
Could you please guide me on this
BR
Sridha
Edited by: sridha on Sep 5, 2010 11:53 PM
Edited by: sridha on Sep 5, 2010 11:54 PMHi Sridha,
If your source database is on Oracle, maybe the best way is to use Oracle Streams (Change Data Capture implementation on Oracle):
http://download.oracle.com/docs/cd/E11882_01/server.112/e17069/strms_over.htm#i1006135
For non-Oracle source database and if you use OWB10g R2 you can try to use CDC code templates:
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10582/code_templates.htm#CHDHGGGI
Regards,
Oleg
Edited by: Oleg2 on - corrected link to Oracle Streams overview
Maybe you are looking for
-
Hello Experts, We have an adobe plugin(importing data from excel to pdf form )developed in older version , when migrated to version8.x.x, While importing "Adobe Acrobat 8.1 has encountered a problem and needs to close. We are sorry for the inconvenie
-
I have Crystal Reports Server xi rel 2. I post the report to the server and schedule it. I then modify the report , group filter in this case, and save it to the server . However the scheduled report does not reflect the changes. I have to create
-
Javax.naming.LinkRef fails
Weblogic JNDI does not appear to handle LinkRef's properly. THe following snippet illustrates://create Sun RMI Registry on//non-standard portjava.rmi.registry.Registry reg = java.rmi.registry.LocateRegistry.createRegistry(10099);//get WL init context
-
Urgent help on Oberthur cosmo v7 smart cards sdk
Please every one, I have bought an Oberthur cosmo v7 smart cards but do not have the sdk to develop my application. This has made my development very difficult. I have very limited time to submit my project work. Please, is anyone conversant with the
-
I set up a passcode that will not unlock the screen. How do I reset the passCode?