Defunct RFC destination prevents server from starting
Hi,
We have EP7.0 SP8 installed in Windows/Oracle.
There was an RFC destination defined pointing to a BI system and now the system is removed/renamed from the name space.
When the j2ee engine is started it looks for the system and results RFC_COMMUNICATION_ERROR and changing the status of the server process to "Starting Apps" and hangs in there for ever.
The dev_server0 log shows the following error: Is there a way to remove this RFC destination offline, without starting the server (assuming this is the root cause of th e problem or is there something else is going wrong?
Thanks for your time.
[Thr 5112] * LOCATION SAP-Gateway on host sisbid00 / sapgw00
[Thr 5112] * ERROR internal error
[Thr 5112] *
TIME Tue Sep 19 17:51:34 2006
[Thr 5112] * RELEASE 700
[Thr 5112] * COMPONENT NI (network interface)
[Thr 5112] * VERSION 38
[Thr 5112] * RC -1
[Thr 5112] * MODULE nixxi.cpp
[Thr 5112] * LINE 4329
[Thr 5112] * DETAIL NiIGetSockName
[Thr 5112] * SYSTEM CALL getsockname
[Thr 5112] * ERRNO 22
[Thr 5112] * ERRNO TEXT Invalid argument
[Thr 5112] * COUNTER 5487
[Thr 5112] *
[Thr 5112] *****************************************************************************
[Thr 5820] Tue Sep 19 17:51:37 2006
[Thr 5820] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
Ok I reinstalled the pulseaudio & libpulse upgrades and rebuilt phonon-pulse & kdemultimedia-kmix-pulse against the new versions and it appears to have resolved the issue. I had originally inspected the logs of X & KDM but did not see any errors or information regarding why X would suddenly drop whilst logging in.
Similar Messages
-
Prevent iChat from starting at login
How do I prevent iChat from starting at login? I looked in my account login items and it is not listed there. I shut the app completely before shutting down the computer so it shouldn't be automatically be relauncing due to the "reopen windows" setting in Lion. Just can't figure it out. Any help would be appreciated.
Hi,
With iChat Open check the Window Menu about which windows are actually open
The App should be Quit at the end rather than hitting the red blobs on the windows (this only closes/Hides the windows and does not Quit the app)
Are you getting Off Line IMs when it starts up ?
If this is the case it is a "feature" rather than a fault although you don't have a lot of control over it.
In earlier versions the support app iChatAgent "Listens" to the AIM Server in particular and will answer if an Off Line IM is sent.
If iChat is closed down iChatAgent will launch it.
In iChat 6 this is done by IMAgent (it does the same job for FaceTime if it's preferences are set to ON but the app is not launched)
Most likely it is a window that belongs to iChat that is not getting closed.
At the same time it may not be in view (the Window Menu should give clues).
It could be Off Line IMs
9:47 PM Monday; January 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Is there a way to prevent iTunes from starting up when connecting an iPad to my Macbook?
Is there a way to prevent iTunes from starting up when connecting an iPad to my Macbook? We use Apple Configurator and would love to be able to set up the MacBook to open Apple Configurator when we plug in an iPad.
When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.
-
Is there a way to prevent iTunes from starting up when I connect my iPad?
Is there a way to prevent iTunes from starting up when I connect my iPad? We use apple configurator and would prefer to have that open up, if possible.
When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.
-
hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.
No, i do not have quickTime player.
I have tried to close dep off for iTunes but failed to do so as i got a msg that iTunes can't work without Dep in execution data prevention. -
Snippet to start one an element and prevent another from starting
I need help. I need a snippet to start one an element and prevent another from starting. they are at the same place in the timeline and need to be there for other elements. but right now when I click one the other plays also how do I stop one from playing when the other is clicked?
I need it to show. its a header and a footer that move in and out. but they need to stay on the same timeline in order for the side controls that move in and out from the side. because when they play they move the header in and out. lol did you get that? Thanks for the comment.
-
Prevent iTunes from starting sync?
I'm sure there must be a way to do this - my iPods are set to automatically begin syncing when connected, but I'd like to either stop it once started or prevent it from starting so I can change some of the options first. Is that possible?
thanks.
SallyYou can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
-
RFC Destination SAPHTTP Inaccessible from Archivelink
Hi,
I am working on a project to implement Archivelink in our SAP ECC 5.0 system. Our plan is to allow users to store documents in a content server which are linked to a GL account document in SAP. We have done the configuration successfully in a test system. However, it takes about 30 seconds to store the first document. Subsequent documents are stored in just a few seconds. During the delay we receive Message "Testing destination SAPHTTP" followed by "RFC destination SAPHTTP inaccessible" (CMS 140). After these messages I think the document is stored using destination SAPHTTPA. I have discovered that by adding the following entry to the HOSTS file on my laptop the document is stored successfully using destination SAPHTTP. There are no messages or 30 second delay.
205.123.456.789 mysapsys
It appears to me that SAPHTTP is attempting to resolve "mysapsys" as the domain name instead of "mysapsys.mycompany.com" which is necessary for DNS on our network. Is there anything we can do so SAPHTTP is resolved successfully without updating every users' HOSTS file? Our Basis team has implemented our servers and SAPGUI so it is not necessary for the HOSTS file to be updated on each user's machine.
Testing destination SAPHTTP from transaction SM59 is successful.
Finally I've attached the SAPHTTP log to the end of this post. You can see when I test from SM59 the host name is "mysapsys.mycompany.com". When I attempt to attach a document the host name is "mysapsys". Why are the host names different?
Thanks for your help,
Jim
trc file: "dev_http", trc level: 2, release: "620"
Fri Jun 30 16:49:41 2006
[2160] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#37 $ SAP
[2160] Environment SAP_CODEPAGE = 1160
[2160] HTTP Start : argc - 6 a0 - saphttp
[2160] /H/<b>mysapsys.mycompany.com</b> sapgw15 08839685 CPIC_TRACE=2 IDX=1
Fri Jun 30 16:49:44 2006
[2160] Rfc call HTTP_VERSION start
[2160] elapsed time 2923 ms - active time 0 ms - wait time 0 ms
[2160] Rfc call HTTP_VERSION end
[2160] elapsed time 3094 ms - active time 0 ms - wait time 0 ms
[2160] SAPHTTP end
trc file: "dev_http", trc level: 2, release: "620"
Fri Jun 30 16:50:54 2006
[1488] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#37 $ SAP
[1488] Environment SAP_CODEPAGE = 1160
[1488] HTTP Start : argc - 6 a0 - saphttp
[1488] /H/<b>mysapsys</b> sapgw15 08917306 CPIC_TRACE=2 IDX=3
Fri Jun 30 16:50:56 2006
[1488] RfcError - key: RFC_ERROR_COMMUNICATION
[1488] message: CPIC-CALL: 'CMACCP'
LOCATION CPIC (TCP/IP) on local host
ERROR hostname 'mysapsys' unknown
TIME Fri Jun 30 16:50:56 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -2
MODULE ninti.c
LINE 386
DETAIL NiPHostToAddr
SYSTEM CALL gethostbyname
COUNTER 1Hi,
Did you make a note search ?
A 2 minutes search gave me [Note 506314 - SAPHTTP and SSL|https://service.sap.com/sap/support/notes/506314]
It seems that I was wrong and that SSL is possible with saphttp.exe since release 6.20
>If you have R/3 Version 4.6x:
>- ensure that SAPHTTP 6.20 is installed.
>- use the sapgenpse program to process the PSEs.
I still think this is a bad idea to use saphttp.xe with ECC 5.0 but it is your choice !
Regards,
Olivier -
How do I prevent Skype from starting automatically on arch linux?
there was point in the settigs "General" folder, but now i can't see it, so how should i prevent this from autostart?I don't use pulseaudio, so i have apulse - pulseaudio emulation tool to use skype without pulseaudio and have modified my skype shortcut to run with itWhen skype autostart - it doesn't use apulse so there is no sound and i have to restart it. thats annoyingAlso i don't use skype to much so i don't need it to autostart even if i had pulseaudioSo, how will i prevent it from autostart?
I know this is an old post but this is a quite common and relevant topic with which I've spent sometime and would like to drop the solution, at least for Fedora 22 under KDE. In order to avoid skype to start at startup/login (which is quite annoying and a privacy invasion) I just deleted the file /etc/prelink.conf.d/skype.conf and that was it.(let's see if this post is up in the skype forum for long ?!)
-
WLS 5.1 SP6 with JRE 1.3 - Cannot start server from Start Menu or as NT service
Hi:
I am trying to setup WLS 5.1 SP6 runing with JRE 1.3 on Windows 2000 Server to
run as an NT Service or from the start menu. The wlserver program is invoked the
following error message is returned. (A similar error is returned when starting
as an NT Service)
=====================================================
D:\weblogic>bin\wlserver
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
loadIt: Java DLL not found.
The Windows registry is misconfigured
for the WebLogic Server
JAVA dll not found: d:\jre1.3.0_02\jre\bin\javai.dll:
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
D:\weblogic>
=========================================================
I found old messages in the newsgroups indicating that there have been issues
with WLS 5.1 and Java 1.3 on NT running as a service or from the start menu.
But there does not seem to be a resolution to this problem yet.
Is there a workaround to this issue. Is there a new wlserver that supports 1.3
for WLS 5.1. I am running with SP6 because we need to run with WLCS 3.2 also.
WLS 5.1 starts up fine as a service or from the start menu with the JRE 1.2 shipped
with the product or from a command window with startWeblogic running SDK 1.3
Thanks in advance for any help to clear this up.
-WilliamThanks for the suggestion... the registry already has this setting... that does
not seem to be it.
From looking closer at what is installed with the 1.3 JRE versus the 1.2 JRE packaged
with the 5.1 server... it seems to me that the issue has to do with support for
the Hotspot VM.
The 1.3 JRE has a hotspot subdirectory under the bin, there is no classic subdirectory,
as is the case with the 1.2 JRE in the 5.1 package or even with a standard SDK
1.3 installation.
Does 5.1 support the hotspot vm. How can I switch it to use the 'older' JVM instead?
If I copy the 'classic' jvm.dll from the sdk 1.3 installation into the bin\classic
directory of the 1.3 JRE, the server does start, but an error message indicating
that the javai.dll was not found still comes up. Followed by the following error:
Warning: JIT compiler "symcjit" not found. Will use interpreter.
The server startup output then comes up ... Please help, anyone?
"Jcmuppy" <[email protected]> wrote:
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.1', but '1.3' is required.
If the value is "1.1", chage the value into "1.3"
"William Rojas" <[email protected]> wrote:
>
Hi:
I am trying to setup WLS 5.1 SP6 runing with JRE 1.3 on Windows 2000
Server to
run as an NT Service or from the start menu. The wlserver program is
invoked the
following error message is returned. (A similar error is returned when
starting
as an NT Service)
=====================================================
D:\weblogic>bin\wlserver
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
loadIt: Java DLL not found.
The Windows registry is misconfigured
for the WebLogic Server
JAVA dll not found: d:\jre1.3.0_02\jre\bin\javai.dll:
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
D:\weblogic>
=========================================================
I found old messages in the newsgroups indicating that there have been
issues
with WLS 5.1 and Java 1.3 on NT running as a service or from the start
menu.
But there does not seem to be a resolution to this problem yet.
Is there a workaround to this issue. Is there a new wlserver that supports
1.3
for WLS 5.1. I am running with SP6 because we need to run with WLCS
3.2 also.
WLS 5.1 starts up fine as a service or from the start menu with the JRE
1.2 shipped
with the product or from a command window with startWeblogic running
SDK 1.3
Thanks in advance for any help to clear this up.
-William -
Prevent Skype from starting automatically
I need to prevent Skype for Android from starting automatically so it will not ring when a call comes in to my Skype-In number. Most of the time I want calls to my Skype-In number to ring on my Skype phone at home only.
I know this is an old post but this is a quite common and relevant topic with which I've spent sometime and would like to drop the solution, at least for Fedora 22 under KDE. In order to avoid skype to start at startup/login (which is quite annoying and a privacy invasion) I just deleted the file /etc/prelink.conf.d/skype.conf and that was it.(let's see if this post is up in the skype forum for long ?!)
-
How prevent entourage from starting everytime during start up
How can I stop Entourage from starting up everytime using OS 10.6.8. Entorage is part of Office 2008 for Mac. Thanks
Have you removed it from the login items for your account?
-
Prevent Movies from starting at max volume?
Everytime I click on a movie or sound file that plays in quicktime, the volume bar is maxed out. Is there a way to prevent that from happening?
Short of editing the file properties there is no other way to reduce the volume. QuickTime Player uses the system volume as a "guide" but many files can be set to "overdrive" using the same steps as above.
Using the Finder "preview" (Get Info window) hold down the Shift-Command keys as you click on the sound icon of the controller. You'll see a new "line" and anything above it would be overdrive audio. -
I use an Macbook from 2006 with OS X 10.7.5
MyDay starts up every time I switch on. I don't use it, so want to remove it from the list of programs which start automatically. I have followed all instructions for doing this, and have of course unlocked and relocked the relevant page in Systems Preferences, but the instruction never 'sticks', and MyDay still starts every time. Anyone know what to do?Check StartupItems...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/StartupItems
Click Go. If you see any reference to MyDay, delete it. That does not delete the app Just keeps it from launching when you startup your Mac.
Just to be sure, you checked System Preferences > Users & Groups > Login Items ??
Unlocking or locking the padlock icon only prevents other users from changing your preferences. -
How do I prevent iPhoto from starting every time I connect to a camera card?
Every time I put in a camera card iPhoto starts. Is there a way to prevent this short of deleting iPhoto from the applications?
In the iphoto Preferences disable "connecting Camera opens" - set it to "No application".
If that does not suffice, do the same in Image Capture:
In Image Capture - with your camera card inserted- click the disclosure triangle in the lower left corner of the window to reveal the menu to set the preferences for the device:
Then set the option to "Connectiong this ... opens" to "No application"
Maybe you are looking for
-
hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??
-
I'm using JAVA3D that creates a map. The map is split into 4 parts. I forced each part to rotate only around the X-axis and this is done with the user clicking on it with the mouse. I want to limit the rotation where the user can rotate up to 90 degr
-
As I mentioned in subject, I am just wondering Whether the java component (Not ejb, not servlet) can be deployed in App Server and get the services provided by App Server or not?
-
How long does it takes for iTunes to restore software on a 5s?
How long does it takes for iTunes to restore software in a iPhone?
-
Combining/Merging Clips into one long clip in the project bin?
I'm shooting on Panasonic P2 cards Since P2-material comes in as an individual clip per recording, it's quite different from working the way we're used to with one long clip using cassettes. My wish is to merge these clips to one, but I'm having some