Degrade Theme. New one does not work as old one did

I do not prefer the large icons that areo fox theme is providing. I want to degrade the theme. I dont use this computer that often (once a week). I have been using it for years and I just want this theme to feel natural

Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your question, you need to contact the theme's author for support. You should be able to find old version of the theme in addons.mozilla.org, if that's where the theme is stored.

Similar Messages

New SSE2 Does not work, with old computer!

Had to reload Norton, Got a popup reading... your processor is not supported!
So I downloaded, the earlier version and updated it to 21.7.0.11 which ran fine! The issue now is, the software keeps asking me for the activation code? Downloaded off of Norton, but subscription through Comcast!          Maybe I should just get AVG? Or maybe it is time to upgrade, miss my XP

Ok, I’ll give it one more shot, with links!
I log into my account on Comcast, then go here!
https://constantguard.xfinity.com/
I then click on Norton Security Suit, for Windows!
Which gives me this popup screen…
You are now leaving the Constant Guard website
You are now being directed to a secure website to download the Norton Security Suite software.
To return to the Constant Guard website, please click the "back" button in the upper-left corner of your web browser.
I then click and it takes me to…   Norton Security Suit download page!!!
Which address shows as     https://webdl.symantec.com/
Its download button reads,
Norton Security Suite
PIN : 9***********X
So then I click on START DOWNLOAD!!!
A popup with the NORTON DOWNLOAD MANAGER.EXE appears and I click save!
The file is downloaded, I open and run… Surprise, and it's back to my original post!!!
Popup reads, unsupportive processor, so I click on SSE2 Support, page opens to the same link that I spoke of and that you had posted earlier...   https://support.norton.com/sp/en/us/home/current/solutions/v101962385_EndUserProfile_en_us
Which, again is the place that I downloaded the earlier versions, as you can see about midway down...
Download the latest compatible version
Depending on your Norton product, download the latest version (21.7.x.x):
Norton AntiVirus
Norton Internet Security
Norton 360
Norton 360 Premier
After you install the Norton product, run LiveUpdate until all updates are installed.
This is the the page they and you directed. I clicked and downloaded this Norton 360 So now it is asking me for the key??? That is the one you told me to download???

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

New tab does not work

"Open a new tab" does not work, nor does File/New Tab

This issue can be caused by the Ask.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbWCL2/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
== This happened ==
Every time Firefox opened
== I recently re-installed Firefox.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Brand New Digitizer Does NOT work...

Hello, Im using an old Plam M505 to give me information VIA diagnostics on my car, just simple text. I bought it brand new never turned on flawless, and when I went to turn it on, The digitatizer does not work. Im stuck at the very first screen "use the stylis to tap the screen and continue" I tapped it, nothing, I can power no and off and dim and brighten the screen with the power button when its plugged in, but thats it. I charged it and it doesnt turn on unless plugged in. If the battery was never used and has been sitting there for 8 years its probibaly dead huh? also would that cause my digitizer to not work? Oh also when I push the application buttons it just beeps a little. One more thing the software does not recognise it, so I cant even access it through that.
Post relates to: Palm m505

Hello dsmcraze, Welcome to the Palm Support Community!
Always the first thing to try in any PalmOS "hiccup" is a Soft Reset. Gently press the tiny "Reset" button on the back of the device to reboot it. No information will be lost.
Did you fully charge the device for 3 hours before using it? Try plugging it into the charger and tap the Reset button. This theoretically should reset the charging circuitry that monitors the "full" level.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Safari (OSX 10.9) new tab does not work

I opened Safari after the Mavericks upgrade and, initially, it looked fine. Now when I open it, it does not work. I press command-T and a new tab does not appear; I press command-N and a new window does not appear. If I quit Safari and reopen it, the tabs show up. So the UI is not reflecting the input. I've removed all non-Apple internet plug-ins and I've removed all extensions, moved all plists to my desktop and I still have this behavior.

OK, so apple support had me reset my SMC amd PRAM. In resetting PRAM, I was able to run Disk Utility and repair permissions too. And it worked. Tabs and new windows show up and it's all responsive.

Persian(فارسی)Keyboard on new update does not work (10.3.2)

persian keyboard does not work in 10.3.2 os unfortunately,does not some of the original persian letters like پ چ گ ژ

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

Installation of new NWRFCSDK does not work with sapnwrfc-0.19.

Hi,
I was trying to install the new nwrfcsdk and the corresponding ruby sapnwrfc-0.19.
The rfsdk is located in D:\downloadmanager\mwrfcsdk (jsut unpacked it after download from service.sap.com and copied the dll into services32)
Unfortunately this does not work. Do I miss something ?
Any help is appreciated !
Here the errors I get:
I get errors on installation of the sapnwrfc-0.19 like:
D:\rubyy\sapnwrfc-0.19>ruby setup.rb config --with-nwrfcsdk-dir=D:\downloadmanag
er\nwrfcsdk
---> lib
---> lib/sapnwrfc
<--- lib/sapnwrfc
<--- lib
---> ext
---> ext/nwsaprfc
D:/rubyy/InstantRails/ruby/bin/ruby.exe D:/rubyy/sapnwrfc-0.19/ext/nwsaprfc/extc
onf.rb --with-nwrfcsdk-dir=D:\downloadmanager\nwrfcsdk
Modified CFLAGS: -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -D
SAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel
Modified CFLAGS: -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -D
SAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel
Modified CPPFLAGS: -ID:\downloadmanager\nwrfcsdk/include
Modified LDFLAGS:
Modified LIBPATH: D:\downloadmanager\nwrfcsdk/lib
checking for sapnwrfc.h... no
adding default nwrfcsdk location for headers ...
checking for sapnwrfc.h... no
This will not work - ABORTING because cannot find sapnwrfc.h
setup.rb:658:in `command': system("D:
rubyy
InstantRails
ruby
bin
ruby.exe"
"D:/rubyy/sapnwrfc-0.19/ext/nwsaprfc/extconf.rb" "--with-nwrfcsdk-dir=D:
downl
oadmanager
nwrfcsdk") failed (RuntimeError)
 from setup.rb:663:in `ruby'
 from setup.rb:1279:in `extconf'
 from setup.rb:1270:in `config_dir_ext'
 from setup.rb:1573:in `__send__'
 from setup.rb:1573:in `traverse'
 from setup.rb:1590:in `dive_into'
 from setup.rb:1571:in `traverse'
 from setup.rb:1575:in `traverse'
 ... 9 levels...
 from setup.rb:829:in `__send__'
 from setup.rb:829:in `invoke'
 from setup.rb:776:in `invoke'
 from setup.rb:1619

Hi ,
here the output of the log file:
have_header: checking for sapnwrfc.h... -
no
"cl -nologo -E -I. -ID:/rubyy/InstantRails/ruby/lib/ruby/1.8/i386-mswin32 -ID:/rubyy/sapnwrfc-0.19/ext/nwsaprfc -ID:/downloadmanager/nwrfcsdk/include -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -DSAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel conftest.c -P"
checked program was:
/* begin */
1: #include <sapnwrfc.h>
/* end */
have_header: checking for sapnwrfc.h... -
no
"cl -nologo -E -I. -ID:/rubyy/InstantRails/ruby/lib/ruby/1.8/i386-mswin32 -ID:/rubyy/sapnwrfc-0.19/ext/nwsaprfc -ID:/downloadmanager/nwrfcsdk/include -MD -Zi -O2b2xg- -G6 -DWIN32 -D_CONSOLE -DUNICODE -D_UNICODE -DSAPwithUNICODE -DSAPonNT -DSAP_PLATFORM_MAKENAME=ntintel -I/usr/sap/nwrfcsdk/include conftest.c -P"
checked program was:
/* begin */
1: #include <sapnwrfc.h>
/* end */
Regards
Marcus

Hi! With version 36 I can no longer download videos; I can watch them, but download does not work. I use Win 8.1 and download helper. I returned to 35.1

Hello Community of Users
I actually want help from the experts; and with my question everything is said. As I wrote: I returned to version 35.01 (US - before I had a German version - both worked or work) for the time being; with 36.0 almost everything is fine except that I cannot download videos any more.
The " educated guesses" seem to be correct except for the Shockwave; at least I couldn´t find it in the list.
Oh, I forgot: I got a message from my firewall when I had downloaded version 36, stating that it had blocked some features of this app, then listing those features, but giving the possibility to grant access to them ("Zugriff zulassen") on which I clicked. - See uploaded screenshot.
Any idea where the problem could be?

Hi edmeister
thanks for dealing with my Problem. I´m using the latest Version of downloadhelper; I mentioned that I downloaded the US-Version of 35.01, but the screenshot came from my German Windows 8.1.
I just downloaded 36 again & separately, got the same warning from Windows, clicked again on "grant Access" (Zugriff zulassen), tried out parallel 35.01 - Video download o.k. and 36 - Video download did not function. So I did not get further. The Firewall lets me - so it seems - download with one Version of Firefox and without any changes executed does not let me download with the new one.
Greetings
Faustissifus

Brand new iMac does not work wirelessly

This is a very strange situation and I don't know how much to be concerned about it.
6 weeks ago I bought the first of two brand new iMacs. We have two old G4s both wired into a Netgear wireless router, plus the printer. The first new iMac when switched on, immediately found the Netgear and has worked perfectly, wirelessly, ever since. As it should.
Less than a week ago I bought the second new iMac, which is identical to the first. I put it on the _same desk_ as the Netgear, therefore a distance of only one foot. Straight out of the box, it worked wirelessly to register itself with Apple.
Since then, it has only worked wirelessly very intermittently, and then very slowly indeed. I was wasting far too much time trying to figure out why the wireless did not work, and eventually wired it into the router too.
I was attempting to set up a network with 2 old G4s wired in, and 2 new iMacs wireless. Now I have 3 wired in and one wireless.
Is there something wrong with the second brand new iMac? Or is there some line I should be pursuing with Netgear?
I have written all the IP addresses down in case anyone responding - and I sure hope SOMEONE responds! - thinks that this may be a clue.
Many thanks in advance to all and any replies.

Update: I'm posting this in case it helps others......
I phoned the software support which comes free for 90 days with a brand new iMac.
The bright young man there instantly knew what the problem was, because he'd seen it all before. There's nothing wrong with the iMac and it has nothing to do with IP addresses.
I have to go into the Netgear configuration screen and Enable MAC filtering. This means I'll give the router the hardware addresses of the two iMacs and it will then allow both of them to communicate wirelessly - but no other devices which might be lurking in the vicinity.
Sounds good to me.

Degrade Theme. New one does not work as old one did

Similar Messages

Maybe you are looking for