Degraded performance after upgrading from 3.5.6 to 3.6.2
It is really strange but kernel upgrade significantly affected on ffmpeg performance. I have server to make video transcoding of 11 DVB-S channels to h264 1.2Mbit rate and streaming in via http. Usually server works with no problem and even has idle about 15-20%. Transcoding with no problem.
kernel 3.5.6:
top - 09:31:14 up 15:59, 15 users, load average: 18.31, 11.51, 10.97
Tasks: 128 total, 2 running, 126 sleeping, 0 stopped, 0 zombie
%Cpu(s): 41.3 us, 1.2 sy, 43.4 ni, 13.7 id, 0.0 wa, 0.0 hi, 0.4 si, 0.0 st
KiB Mem: 4012244 total, 1627896 used, 2384348 free, 6064 buffers
KiB Swap: 4208896 total, 0 used, 4208896 free, 39972 cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1286 root 20 0 880m 145m 6076 R 10.6 3.7 1:10.28 ffmpeg
1283 root 20 0 1149m 158m 6080 S 9.5 4.0 0:51.29 ffmpeg
1279 root 20 0 963m 160m 6076 S 9.4 4.1 1:15.47 ffmpeg
808 root 20 0 979m 140m 6060 S 7.7 3.6 565:35.58 ffmpeg
807 root 20 0 843m 133m 6040 S 7.7 3.4 551:19.23 ffmpeg
797 root 20 0 852m 138m 6056 S 7.3 3.5 510:25.80 ffmpeg
796 root 20 0 953m 113m 6056 S 7.0 2.9 454:18.05 ffmpeg
809 root 20 0 916m 139m 6056 S 6.9 3.6 564:01.53 ffmpeg
794 root 20 0 888m 112m 6056 S 6.8 2.9 462:33.01 ffmpeg
795 root 20 0 953m 114m 6056 S 6.8 2.9 436:02.91 ffmpeg
793 root 20 0 961m 122m 6072 S 6.2 3.1 624:25.06 ffmpeg
785 root 20 0 16472 2132 984 S 0.1 0.1 1:32.40 screen
29 root 20 0 0 0 0 S 0.0 0.0 0:56.75 kworker/6:0
46 root 20 0 0 0 0 S 0.0 0.0 0:51.88 kworker/3:1
1162 root 20 0 0 0 0 S 0.0 0.0 0:19.77 kworker/4:3
With 3.6.2 load is the same but it is impossible to watch any channel -- errors and lags. I can see normal only one channel with one ffmpeg running, second ffmpeg on 3.6.2 did lags.
After downgading kernel to 3.5.6 all works as its normal state. All 11 channels show normal pictures with no lags.
Seems it is problem underground knocking ...
ulke wrote:
Recent kernels seem to have problems with CPU frequency scaling. For some people it doesn't scale down, for me, and maybe you, it sometimes doesn't scale up. You can monitor the CPU frequency by running:
$ watch grep \"cpu MHz\" /proc/cpuinfo
If scaling is the source of your problem, you can switch to the performance governor, or try to tweak the ondemand governor.
Thanks. I'll try may be. Ehhh ... should wait for 3.6.6 or even 3.6.16 for server :-).
Similar Messages
-
Asset query execution performance after upgrade from 4.6C to ECC 6.0+EHP4
Hi,guys
I am encounted a weird problems about asset query execution performance after upgrade to ECC 6.0.
Our client had migrated sap system from 4.6c to ECC 6.0. We test all transaction code and related stand report and query.
Everything is working normally except this asset depreciation query report. It is created based on ANLP, ANLZ, ANLA, ANLB, ANLC table; there is also some ABAP code for additional field.
This report execution costed about 6 minutes in 4.6C system; however it will take 25 minutes in ECC 6.0 with same selection parameter.
At first, I am trying to find some difference in table index ,structure between 4.6c and ECC 6.0,but there is no difference about it.
i am wondering why the other query reports is running normally but only this report running with too long time execution dump messages even though we do not make any changes for it.
your reply is very appreciated
Regards
BrianThanks for your replies.
I check these notes, unfortunately it is different our situation.
Our situation is all standard asset report and query (sq01) is running normally except this query report.
I executed se30 for this query (SQ01) at both 4.6C and ECC 6.0.
I find there is some difference in select sequence logic even though same query without any changes.
I list there for your reference.
4.6C
AQA0FI==========S2============
Open Cursor ANLP 38,702 39,329,356 = 39,329,356 34.6 AQA0FI==========S2============ DB Opens
Fetch ANLP 292,177 30,378,351 = 30,378,351 26.7 26.7 AQA0FI==========S2============ DB OpenS
Select Single ANLC 15,012 19,965,172 = 19,965,172 17.5 17.5 AQA0FI==========S2============ DB OpenS
Select Single ANLA 13,721 11,754,305 = 11,754,305 10.3 10.3 AQA0FI==========S2============ DB OpenS
Select Single ANLZ 3,753 3,259,308 = 3,259,308 2.9 2.9 AQA0FI==========S2============ DB OpenS
Select Single ANLB 3,753 3,069,119 = 3,069,119 2.7 2.7 AQA0FI==========S2============ DB OpenS
ECC 6.0
Perform FUNKTION_AUSFUEHREN 2 358,620,931 355
Perform COMMAND_QSUB 1 358,620,062 68
Call Func. RSAQ_SUBMIT_QUERY_REPORT 1 358,569,656 88
Program AQIWFI==========S2============ 2 358,558,488 1,350
Select Single ANLA 160,306 75,576,052 = 75,576,052
Open Cursor ANLP 71,136 42,096,314 = 42,096,314
Select Single ANLC 71,134 38,799,393 = 38,799,393
Select Single ANLB 61,888 26,007,721 = 26,007,721
Select Single ANLZ 61,888 24,072,111 = 24,072,111
Fetch ANLP 234,524 13,510,646 = 13,510,646
Close Cursor ANLP 71,136 2,017,654 = 2,017,654
We can see first open cursor ANLP ,fetch ANLP then select ANLC,ANLA,ANLZ,ANLB at 4.C.
But it changed to first select ANLA,and open cursor ANLP,then select ANLC,ANLB,ANLZ,at last fetch ANLP.
Probably,it is the real reason why it is running long time in ECC 6.0.
Is there any changes for query selcection logic(table join function) in ECC 6.0. -
Performance problem for mass transactions after upgrade from 4.7 to ECC6.0
Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
TajHi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Bad performance on CF9 after upgrade from CF8
Hello and happy new year for everybody
I'm stuck with a problem after upgrade from CF8 entreprise to CF9 entreprise.
We are using IIS6 on WIN2003R2 (SP2).
There are a lot of "503 Server Error" with no content. (about 0.05% of request). This can be occured on big or small CFM, graphic ressources, etc...
For each error I can see the following error on the connector logs (jrun_iis6_wildcardYYMMDD.log).
2011-01-02 19:00:05 jrISAPI[1456:3940] returning error page for JRun too busy or out of memory
I've never seen this message in previous CF connector version.
And on the jrun log (coldfusion-outXXX.log), I read the following errors:
02/01 20:53:31 error unexpected end of part
java.io.IOException: unexpected end of part
at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
at coldfusion.CfmServlet.service(CfmServlet.java:200)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
02/01 20:53:31 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@4006ca]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Connector settings (jrun_iis6_wildcard.ini) :
verbose=false
Buffer=true (I've tried with false)
serverstore=C:/ColdFusion9/runtime/lib/wsconfig/1/jrunserver.store
bootstrap=127.0.0.1:51800
apialloc=false
maxworkerthreads=100 (I've tried to increase/decrease this value)
JRUN settings:
Threads number: 150
Max queued jrun threads: 150
Is anyone have experience the same issue ? How can I try to solve this ?
Big thanks!@Charlie:
in the cf\runtime\logs there is only that kind of information:
05/01 10:28:44 error unexpected end of part
java.io.IOException: unexpected end of part
at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
at coldfusion.CfmServlet.service(CfmServlet.java:200)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
05/01 10:28:44 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@16c00e2]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
There is no line about a memory issue!
These errors happening on random request not ALL!! (arround 0.05%), and there is no real link between load and this... Our applications handle a lot of POST download, but like I've described before, error can occured on classic cfm page and static ressource...
What I mean with upgrade CF8 to CF9, is with our 10 other servers running on CF8, I've never see that 503 issue outside a real jrun problem (like a memory crash, restart, etc...)
@Carl:
Server is running on WIN2003R2SP2 32 bits OS (dual Xeon E5506, 4Go RAM). Here is the jvm.config arguments:
# Arguments to VM
java.args=-server -Xms1024m -Xmx1024m -Dsun.io.useCanonCaches=false -XX:PermSize=256m -XX:MaxPermSize=512m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Do you know if it should be possible to try old JRun connector used by CF8 ? -
The optimizer changed after upgrade from 8i to 10g
I have upgraded my Oracle database from 8i (8.1.7.3) to 10g (10.2.0.3). After upgraded, there's some SQLs are with performance issue that the response time is very slow. The SQL can run very fast (around 1 seconde) in the pre-upgrade environment. Also, after generating the execution plan, there's different from the original enivronment (8i) which the query using some full table scan instead of index scan originally used in 8i.
The optimizer_mode of 8i is RULE and it's CHOOSE when upgraded.
My questions are:
1. Do I have any init.ora parameters setting in 10g environment which differ from 8i?
2. What method of analyzing tables is appropriate to use in 10g? Will this affect the performance like my case?
Thanks,
WaiPlease have a look to following threads:
Re: Optimizer Statistics collection after upgrade from 8i to 10R2
Re: DB upgrade from oracle 8.1.7 to oracle 10.2.0.2 -
Maxdb give Kernel error after upgrade from 7.3 to 7.5
Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
The details of the error in knldiag are:
2008-07-02 14:22:39 19 11554 COMMUNIC UKT8 attached big comseg at 0x700000060000000
2008-07-02 14:22:39 19 11555 COMMUNIC UKT8 big comseg ends at 0x7000000601803F8
2008-07-02 14:22:39 16 ERR 20152 RTE UNIX change owner with chown(knltrace,964,202) failed: Not owner
2008-07-02 14:22:39 16 11000 vdevsize 'knltrace', 666 failed
2008-07-02 14:22:39 16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
2008-07-02 14:22:39 16 ERR 11599 BTRACE -
> Emergency Stack Back Trace <----
As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
thanksHello Thomas,
-> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
Please check the upgrade log in the /sapdb/data/wrk
-> Please check the ownership of the files in the database RUNDIRECTORY.
For example, if the database owner:group of your database is sdb:sdba, then
-rw-rw---- 1 sdb sdba u2026. knltrace
-> Please update the thread with the output of the following commands :
sdbregview -l
xinstinfo SD3
id sdb
ls -l <runditectory>
< rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
more /etc/opt/sdb
Thank you and best regards, Natalia Khlopina -
After upgrade from 11.5.10 to 12.1.3 unable to view picture in people form
After upgrade from 11.5.10 to 12.1.3 unable to view picture in people form
An error msg "You do not hava access to perform this action" is displayed
Can anyone pls help me to resolve this issue
ThanksJay, Thanks for your inputs, i went throught the metalink notes suggested by you but could not find a solution to resolve my issue.
I am getting this error from other responsibilities aswell. But i could view the picture from the same responsibility in 11i. After upgrade to R12 i am not able to view the picture. can you suggest some steps to troubleshoot this issue.
Thanks -
Another "horrible performance after upgrading to Lion" post
Hi,
Sorry for yet another "my computer has horrible performance after upgrading to Lion" post. I did search the forum before posting.
I have a relatively new Macbook Pro, 8 GB RAM, 2.8 MHz Intel i7 CPU. I upgraded from Snow Leopard to Lion, then Lion to 10.7.2.
The first time I upgraded, I no longer had my user account, so restored from Time Machine back to SL. After a month or so, I hoped Apple had fixed the bug, so I redownloaded and reinstalled, and this time the upgrade succeeded.
Ever since the upgrade, my MBP runs like a dog. I get the spinning beach ball constantly, across all range of applications, both Apple and 3rd party. Occasionally it doesn't wake up from sleep (close, open lid) and I have to kick it in the head by holding down the power button.
I've tried booting into the recovery partition, running disk utility, and repairing disk and permissions. I've read elsewhere (Google hit) that doing a completely clean install fixes the performance issues (for those users anyway).
I know this is a fairly generic post, but any advice on how to maximize machine performance under Lion, or should I revert to Snow Leopard? Do I really have to wipe the disk, install fresh, restore all non-OS files (don't accidentally wipe a required OS file), then reapply the 10.7.2 maintenance? Yuck.
Thanks,
Scotttry an SMC reset if you are not seeing any weird spikes in Activity Monitor and you've deduced that none of your third party drivers or apps are interfearing with the way lion works.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
source: http://support.apple.com/kb/ht3964 -
MSY does not start after upgrade from 50SP6 to SP11
Hello experts again,
after upgrading from 50sp6 to sp11 I cannot start MSY.
I've implemented note 1099457 - AMT is starting now,
but MSY still does not start.
Has anybody some experience what this could be ?
Thanks and best regards
GerdHi,
as I assume the AMT is installed completely new when doing a SP upgrade because it is a standard tool which you cannot enhance. Therefore it is running properly.
Regarding MSY you need to perform a full generation within MAS (Visual Studio) after changing the generation settings to MSY (similar to MSA) because the runtime files like MSY.DLL need to be fitting to the new SP11 framework dlls.
Regards,
Wolfhard -
V('APP_USER) after upgrade from 3.1 to 3.2
Thread [v(APP_USER) after upgrade from 3.0 to 3.1|http://forums.oracle.com/forums/thread.jspa?threadID=631780] is equally valid for upgrade from 3.1 to 3.2 - I've just spent an afternoon trying to find out why one of my apps stopped working after upgrading to 3.2.
Briefly, if you have Patrick Wolf's wrapped versions of functions V, DV, and NV, replace "FLOWS_030100.V" with "APEX_030200.V".Hi Patrick,
I am currently looking forward to use these functions in my applications. We are having some performance problems and the replacement of the v function seems to help alot.
We use the v function in views to get the data dynamically with the Apex applications. I recently found a post you have made showing 2 things you can do to increase performance when using the v function : http://www.inside-oracle-apex.com/caution-when-using-plsql-functions-in-sql-statement/.
1) (select v('APEX_ITEM') from dual)
2) replacement for the v function (deterministic)
Now I wonder, besides the fact that you need to update the functions everytime you upgrade Apex, is there any other downsides of using them ? Should I be using the other method instead ?
Is there a plan to make that function deterministic in a future release ?
Thanks
Patrick -
After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working
after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AMF:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console -
File- Export not working after upgrade from 11i to R12
Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
JagadeeshaEnabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3 -
Lost Developer Toolbar after upgrade from 4.1 to 4.2
After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
SkipThanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip -
SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3
SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andycn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy
Maybe you are looking for
-
If I change my Apple ID to Gmail or hotmail will I then receive the emails for that email address on my apple device?
-
InDesign-XML Exporting text that has been deleted
Hey, After tagging my document in InDesign i deleted some text/pictures/tables. Now whenever i seem to export the same document to XML the old deleted text will export as well? Is there a way to stop this "ghost text" coming back in the export? T
-
Why does my cmus look like this?
It's in a screen session on Leopards terminal. It didn't do this before and I haven't updated anything and I'm confused. If I go to the cmus window, the rest of the screen windows look like that too and when I detach the term looks like that. hrm, it
-
Bought an iphone 5 that has a icloud activation lock
I bought an iphone from a friend from school and he said his brother gave him the phone so i bought it and when i turned it on and put my sim in the phone it went to an icloud password and id screen .. so i call him and i get no answer so i wait it o
-
Weblogic.security.KeyManagementException: java.io.EOFException
I am getting the following error when I am use the certificate obtained from baltimore instead of the default provided by weblogic. I used der2pem also to convert ".der" key file to ".pem" format - it didn't work I am running one-way SSL. the configu