Degugging Inbound and Outbound idocs
Hi friends,
Can any one help me in debugging Inbound and outbound IDocs?
1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
2.How to find out the outbound Idoc FM and debug it?
Your help is appreciated.
Thanks in Advance.
Hi,
Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
Hope it helps,
SG.
Similar Messages
-
Puprose of inbound and outbound idocs
plz help me
what is inbound and outbound idoc ? its purpose
inbound and outbound idoc steps
thnaksHi Mahesh,
Please check this link
what is the need of ALE/ IDOC
what is idoc.
IDOC creation
inbound idoc creation
Best regards,
raam -
Scheduling inbound and outbound idoc processing
Hi everybody.
I ´d ike to know which is the best way to schecule the outbound and inbound idoc process.
Nowadays we are using this:
INBOUND PROCESSING
- In WE20 the idocs are checked with "Trigger with a background program".
- The program RBDAPP01 is scheduled with a job to trigger the process of the inbound idocs.
OUTBOUND PROCESSING
- The program RBDMIDOC is scheduled to create the idocs than have been created with change pointers.
- The program RSEOUT00 is scheduled with a job to trigger the process of the outbound idocs.
Is there any better option to improve de perfomance????
Edited by: Christian Abad Chico on Nov 13, 2009 10:09 AMAny answer
-
Inbound and outbound Idoc for shipment
Hi all,
I woul need to configure an Idoc type both in outbound and in inbound for a shipment document.
For the outbound process I'm trying to use the Idoc:
message type SHPMNT_TNDR
basic type SHPMNT04
Is it right from your point of view?
I don't know which Idoc type I've to use for the inbound process considering that I've to use it in order to add, on an existing shipment document, the stages distances.
Could someone of you help me!!
Thanks,
AHi,
thank you for the previous answer.
Really the inbound Idoc should change an existing shipment document in some field.
I'm trying to build this Idoc type with the WE19 t-code but if I try to elaborate the Idoc I'm not able to process it succesfully (i'll obtain status 51 - message: "Idoc can not be processed without error").
I'm inserting in this Idoc with WE19 the TKNUM (document number), the field E1EDT18-QUALF=CHA (that should be mean change), E1EDT18-PARAM=1 (IDoc fields are only copied if they are empty) and few some other information like the forwarding agent.
Do someone have a suggestion for me in order to create this Idoc, in order to test it and change some fields in my shipment document?
Thanks!! -
Need IDOC inbound and outbound programs
hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijenderfor purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari -
Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.
hi,
your question is very broad,
start reading continue from there...
<a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
An example:
inter company invoiceing:
the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
for more data see the links above
good luck -
How to do IDOC debugging for both inbound and outbound
Hi
can somebody please help me on how to debug the idoc both inbound and outbound in SAP PI.
Regards
BlueHi,
Yes, i have checked but did not get any satisfactory answer.
here is the solution:
Inbound:
We19, Give the idoc #,
click on the inbound functional module and select the radio button in the fore ground
check the check box call in debug mode, this will enter in the functional module debugging.
Outbound:
Check BD73, give the idoc # and execute
or
RSNASTED program and set the breakpoint there
is this correct, i have not tested/ checked yet.
Regards
Blue -
ALE Inbound and Outbound programs
Hi,
Can someone tell me as to how we create the inbound and outbound programs for ALEs??And the cenerio where we use the std FMs and where we use the customs programs for the corresponding action?
Thanks,
Supriya Manik.Hi,
Go thru this Book : Aravind Nagpal
go thru this links,
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
Idoc's
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm (change pointer)
http://www.erphome.net/pdf/tech/J07.pdf#search=%22ALE%20Change%20pointers%22
http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
Thanks
Sunil -
INBOUND AND OUTBOUND DETAILS SAME: Problem
Hi Guys
I am facing problem regarding the inbound and outbound details. My scenario is bypass scenario, sender is JMS and receiver is R/3 system. Both the sender structure and the receiver structure are same. It has two SWC one for sender n one for the receiver. we r importing the idoc and using taht as External Defination. In the document , i am seeing the OUTBOUNd and Inbound details are same, such as the SWC which is being used for the receiver is being used for the outbound details, also the namespace and name of service interafce and the message type are being given the same here(all these are the IDOC name i.e IDOCMSGtype.IDOCname).
i have been asked to follow the document for my refrence.
please help me out. is it the correct process or any changes have to be made???
thanx in advance
Edited by: VArjun86 on Mar 4, 2010 7:37 AManswered
-
Gl balance inbound and outbound
Hi sap gurus,
We are having legacy systems that should interact with sap.I need to know the following for the GL balances through inbound and outbound
1.How data will flow parallely into sap.what steps i have to follow to do this.
2.what user exits or idocs or interfaces i have to use.
3.how the GL balances data will trigger into sap.
Plz help.This is most urgent for me.
Thanks in advance
KiranmayiHi Vijay,
I am assuming that you are asking about inbound and outbound process.
These process comes under SAP Electronic Data Interchange (EDI)
Outbound process--> When a document is sent from SAP system to any other system (to business partners say bank or vendors).
eg sending a quotation to vendor.
Steps:
1. Application doc is created
2. IDoc is generated
3. IDoc transferred from SAP to the Operating System layer
4. IDoc is converted to EDI standards
5. IDoc transmission to business partners
6. Status report sent to SAP system.
Inbound process is reverse of Outbound process-->When a document is sent from business partner to SAP system.
eg Bank sending account statement.
Steps:
1. EDI transmission received
2. EDI Doc is converted into IDoc
3. IDoc transferred to SAP layer
4. Appication document creation
5. View appliation doc.
ALE (Application Link Enabling) method uses tRFC (Transactional Remote Functional Call) port for communication and refer to same concept mostly.
Hope it helps. -
How to add Total Quantity in Inbound and Outbound Delivery screen
Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
BhuvanaHi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo -
Sharing Handling Units between Inbound and Outbound Delveries?
Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ronhi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh -
SAP inbound and outbound delivey in single shipment document
Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AMIt is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM -
Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
JohnnyI think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests. -
To Monitor inbound and outbound messages for ECC 6.0 business system
Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh
Maybe you are looking for
-
I was going to update the ipod touch to see if it would update the battery power, however it won't actually turn on now... and i have spent alot of money on songs and I want them back how can I get them?
-
Cross domain SSAS connection - NT Authority\Anonymous
Hi Friends, We have a web service which is consumed by a web application. Two instances of the same web service (Same application pool) is deployed in the same box and one webservice connects to SSAS 2008 and another one connects to SSAS 2012. The a
-
How do you change the logon screen in 10.7.4
A few months ago I changed my logon screen background to something more desirable for my tastes. Recently, I updated my software to vers. 10.7.4 and the update reverted my custom logon screen back to the original. I tried changing it back, but it see
-
Is there a keyboard shortcut for pulling up the pop-up menu. I don't like that i have to click the drop-down button to see the values in a list. To me it should auto open if I try to start editing in the cell. hanks
-
Unable to download intro courses
The download button comes on the screen for friction of second & then disappears. How do I download the intro courses?