Deinstall Client 11g for win64

Hi to All,
I need to deinstall Oracle Client 11g R2 for win64.
I have tried to use OUI, but, after the remove confirmation, the deinstall don't start.
Can someone suggest to me a solution ?
The OS is windows 7 64bit.
Best Regards
Gaetano

Hi,
Open a command prompt and execute the following command
<oracle_home_directory>\deinstall\deinstallIt will deinstall the home from where you you executed the deinstall command
Salman

Similar Messages

Oracle instant client 11g doesn`t connect to database 10g

hi,
i installed a oracle instant client 11g for windows xp on my pc, because i need a odbc connection.
I don`nt know this product. I don`t find a tns.ora file, so how can i give them the right parameter for my oracle database and how can i make a odbc connection.
Is it already the right client?
Thanks in advance.
Regards
Nicole

nicole4 wrote:
Hi,
now 've seen that installed this client win32_11gR2_client this isn't the instant basic client.
Should i deinstall this client?
Or how can i make there a odbc connection?
Thanks
NicoleODBC sits on top of the Oracle client. (or any other native client of a given db product).
I don't think the ODBC drivers come with the instant client, though if you can locate a 3d party odbc driver for Oracle, that should work with the instant client.
Oracle ODBC drivers do come with the full client, but even there don't install by default - at least not up through 10g. In that case you have to select 'custom installation' (which can be done after a basic run-time installation) and select 'windows components'.

From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

Search engine broken?
Just search for Oracle 11g download and you get this link on the very first page
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Then select 'See All' from the Microsoft Windows (x64) in the Oracle Database 11g Release 2 section
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Can we assume you know how to search that web page for the word 'Client'?

Developer client 11g will be available for Windows 7 64-bit or never ever?

Does Oracle or any user knows developer client 11g will be available on Windows 7 64-bit? If yes, when?
We are in OAS 11g Web Logic however I have to continue using developer 10g on Windows XP. Really awkward.
Thank you for help.
mz

Hi,
Developer Suite 11g does not exist as it was for 10gR2/10gR1 but you can create your own Report Developer 11g environment.
There are some good notes about this.
Reference
Forms/Reports Builders in Version 11g - Release 1 and 2 (Doc ID 1067763.1)
Availability of Oracle Forms/Reports Builders Version 11g R1 (11.1.1.x) on 64 bit Platforms. (Doc ID 1108940.1)
The new 11gR2 supports Builders on 64 bits OS and you can download it from the following link.
Reference
http://www.oracle.com/technetwork/middleware/reports/downloads/index.html
Announcing Oracle Forms & Reports 11g Release 2 (11.1.2.0.0) (Doc ID 1364453.1)
Regards

Installing Latest Oracle Client & ODT for Windows 7 64-bit

I have a Windows 7 64-bit. I would think that using 32-bit Java, 32-bit Oracle Client and 32-bit ODAC would work just fine on this operating system. However, I had no luck getting it to run. Here is what I did and a few reasons why I prefer to never work with Oracle products:
Installed 32-bit JDK/JRE (1.6 Update 25)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Installed 32-bit ODT (11g R3) to Home 1 (installer noted upgrades and new installs)
Failed connectivity from all things windows (ODBC, ADO, ADO.Net)
Uninstalled 32-bit ODT
Failed to uninstall 32-bit Oracle Client Home 1 (oraparam.ini file missing among other issues)
Installed 32-bit Oracle Client (11g R2) Home 2
Failed to uninstall 32-bit Oracle Client Home 1 (told to use deinstall tool)
Failed to uninstall 32-bit Oracle Client Home 2 (told to use deinstall tool)
Failed to run uninstall tool in Home 1 (told to download standalone deinstall tool)
Uninstalled 32-bit Oracle Client Home 2 (completed successfuly with errors - seriously?)
Uninstalled 32-bit Oracle Client Home 1 (completed successfully, but couldn't delete folder)
Oracle.DataAccess and Oracle.Web are still installed in GAC. Uninstall attempts fail (access denied)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Tested connectivity from .Net 3.5 successfully (using 32-bit 2.0 dll)
Tested connectivity from .Net 4.0 successfully (using 32-bit 2.0 dll)
Does anyone have any suggestions on getting Oracle Data Tools for Windows to work before I try that again?

I realize ODT uses ODP, but installing release 3 upgraded the .Net 2.0 ODP DLLs (which were installed from the Oracle Client 11g Release 2 install) and added the .Net 4.0 DLLs. After that install everything stopped working from Windows land and then it took the better part of two hours to get it back to what it looked like prior to the install. The other thing weird thing I noticed is that although Oracle.DataAccess is registered in the 2.0 GAC I cannot add a reference that way using VS2010. I have to manually add a reference to the file path. Although it still appears I do not have to have the assembly copied locally to run, so the GAC registration seems to be working in that regard.

Uninstall Oracle Client 11G

Hi,
Some one could tel me how can i do to uninstall Oracle client 11G ?
Thank's

Hi,
Post the OS details.
For Linux(client 11.2)
http://docs.oracle.com/cd/E11882_01/install.112/e24322/remove_oracle_sw.htm
For windows(client 11.1)
http://docs.oracle.com/cd/B28359_01/install.111/b32007/deinstall.htm
Please keep forum clean by Marking your Post as "Answered" or "Helpful" if Your question is answered
Bala:)

Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
Alex

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Oracle Client 11g R2 in Windows 7 connecting a RAC server

I have the following setup in my laptop
Windows 7
Oracle Client 11g R2
I'm trying to connect "SQL plus" to a load balanced server (RAC) configured as below
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
The problem is, the connection creation is not consistent. It is throwing the following error randomly.
ORA-12545: Connect failed because target host or object does not exist
I'm able connect to another server (not RAC) without any issues. Even TOAD is giving the same error. After few tries, it works.
Anyone facing the same problem, got any solution???
Thanks
Edited by: user3918865 on Oct 7, 2010 4:14 AM

Bruno Palma wrote:
Hi all.
I've done all the checklists suggested but I'm still getting the error. The problem is not with the network and the servers cos I'm working in a Company and when I had Windows XP SP 3 and Oracle Client 10gR2 all was working fine. I'm with Windows 7 Professional 64-bit now. I'm almost sure the problem is with Windows 7 x Oracle Client but it's hard to figure out what's going on. Does anyone have idea what could it be ??I would generate a client side sqlnet trace, then go on a fishing expedition. There's a lot of dense stuff in a full trace, but if you don't panic and just try to make sense of what you can, you'll probably flush it out.
To enable the trace, go to your sqlnet.ora file and add these lines:
TRACE_FILE_CLIENT=clientsqlnet.trc
TRACE_DIRECTORY_CLIENT=C:\app\oracle\product\11.2.0\client_1\network\trace
#TRACE_LEVEL_CLIENT=off
#TRACE_LEVEL_CLIENT=user
#TRACE_LEVEL_CLIENT=admin
TRACE_LEVEL_CLIENT=support
DIAG_ADR_ENABLED = off

Oracle Client 11g on Windows 2008 64 bit ASP Connection Problems

Hi,
I'm trying to set up my old ASP applications on a new web server. I've moved from a windows 2003 server to 2008 64 bit.
I've installed the Oracle Client 11g 64 bit drives and if I create a new ODBC connection tat works fine. But IIS will not connect.
Connection string i've been using is:
Provider=OraOLEDB.Oracle.1; Password=******; User ID=*****; Data Source=*****
All i get is no provider could be found.
"3706 Provider cannot be found. It may not be properly installed."
Can anyone help me out / point me in the right direction?
Thanks
Gareth Owen

Hi,
Thanks for the reply. The app pool is running in 64 bit. I've tried installing a 32 bit version of the oracle provider and shifting the app pool down to that and no joy either.
Have tried changing the permissions on the Oracle folder which gives me no joy. It's as if IIS just has no access to the Oracle provider. But I just don't know how to get this working.
Under windows 2003 things just worked when I installed the Oracle provider...
Gareth

Oracle Client 11g Release 2 silent installation.

Hi, I try to make a silent installation of oracle client 11g release 2 for windows 7 enterprise edition.
I'm familiar with the response file, and how to create this in earlyer versions.
But the "-record -destinationFile <filepath>" switch do not work, and when I run "setup -help" the -record switch is gone.
How do you create a response file with 11g release 2?
Best regards
Lansti

Hey Hans - We shouldn't have to read the manual each time a new installer comes out...why would there be a need to constantly redo how the installers works from a general standpoint (like -record)?? Stupid doesn't even begin to describe it.
Edited by: user10051782 on Jun 2, 2010 1:07 PM

Client 11g silent installation guidance

Hello everyone,
I am just starting my journey into the world of Oracle. Typically it has not been a smooth start hence my post here.
I have been asked to arrange a silent install of the 11g Client (v11.1.0.6.21 specifically) onto a Windows XP machine. I diligently did some reading on the net as there is zero documentation or install media here - just the installation files. I managed to create a response file using "setup.exe -record -destinationFile newbie.rsp", modified some minor settings and tried to:
     setup.exe -silent -noconfig -nowait -responsefile "c:\newbie.rsp"
Unfortunately I just cannot get the text-based "Oracle Universal Installer" window to hide during the install, regardless of what I put in the response file. So I am not doing very well on the "silent install" front.
Then I found this thread:     Oracle Client 11g Release 2 silent installation.
However the installer I have doesn't seem to have the "save the current session as a record file" option.
So, would someone be kind enough to point me in the direction of some up to date doco I can read please? I am keen to learn all about this but I just can't seem to find a place to start.
Any suggestions are greatly received and appreciated.
Best regards,
Troy

Thanks for the swift response Ansiktet!
+>>There is an default response file provided in the installation directory,+
Great. The only file & folder structure I have starts from:
     \install
          \access\...
          \images\...
          \reource\....
          access_setup.bat
          addLangs.bat
          oraparam.ini
          oui.exe
          unzip.exe
     \stage
          \Actions\...
          \Components\...
          \Queries
          install1.jar
          invDetails.properties
          products.xml
          shiphomeinfo.properties
          shiphomeproperties.xml
     setup.exe
I have had a look through and can't find a sample response file. Does this file & folder structure match what you were expecting I should have? And if so, where might I find the sample please?
+>> you can make it easy for you and just edit this one, its quite self-explaining.+
I found a few examples on the net and the "-record" option generated a very nice one for me to start from.
The problem is, regardless of what I put in, the OUI command-line style window always seems to be displayed.
I have put in lines such as:
     FROM_LOCATION="\\Software\Apps\Third party\Oracle\Client 11g\stage\products.xml"
     ACCEPT_LICENSE_AGREEMENT=true
     SHOW_SPLASH_SCREEN=false
     SHOW_WELCOME_PAGE=false
     SHOW_RELEASE_NOTES=false
     SHOW_SUMMARY_PAGE=false
     SHOW_CUSTOM_TREE_PAGE=false
     SHOW_COMPONENT_LOCATIONS_PAGE=false
     SHOW_INSTALL_PROGRESS_PAGE=false
     SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
     SHOW_CONFIG_TOOL_PAGE=false
+>> Then you run it with the same command you used before.+
The comment in the other thread implied this method has been superceeded. Are you familiar with the newer method and where I might find some doco on it (to educate myself)?
Thanks again,
Troy

Oracle database client 11g

Hello,
I did not find where to download Oracle database CLIENT 11gR1 for windows XP (32 or 64bit), can you give me a download link?
Thanks!

Roger22 wrote:
Hello,
I did not find where to download Oracle database CLIENT 11gR1 for windows XP (32 or 64bit), can you give me a download link?
Thanks!you can download from this link:-
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Oracle Database 11g Release 1
Standard Edition, Standard Edition One, and Enterprise Edition
(11.1.0.7.0)
Microsoft Windows Server 2008 (32-bit) (1.9 GB) | See All
Microsoft Windows Server 2008 x64 (1.9 GB) | See All
(11.1.0.6.0)
Microsoft Windows (32-bit) (1.7 GB) | See All
Microsoft Windows (x64) (1.7 GB) | See All
Linux x86 (1.7 GB) | See All
Linux x86-64 (1.8 GB) | See All
Solaris (SPARC) (64-bit) (1.9 GB) | See All
AIX (PPC64) File 1, File 2 (2.3 GB) | See All
HP-UX Itanium File 1, File 2 (2.3 GB) | See All
HP-UX PA-RISC (64-bit) File 1, File 2 (2.3 GB) | See All
See All page contains Database Client, Gateways, Examples, more

Client Adapter for Access table connection

Were is possible to get just the portion of Oracle Open Client Adapter for ODBC V 6.0.5.35 that enable to establishe a connection with Access table?

Cisco broadens WLAN offerings
By John Cox
Network World Fusion, 11/12/03
Cisco Wednesday will announce a series of products and product
improvements to bolster its wireless LAN offerings, including
additional software that shifts WLAN features into other parts
of the corporate net.
The announcement will include, according to a source familiar
with Cisco's plans:
* Cisco's first 54M bit/sec 802.11g radios for its access
points.
* A new client adapter card that can work with 802.11a, 11b, or
11g access points.
* A new version of its IOS network operating system, adapted for
the model 1100 and 1200 access points.
* A new software version for the CiscoWorks Wireless LAN
Solutions Engine, which is a server for administering access
points.
Last June, Cisco unveiled a WLAN strategy called Structured
Wireless-Aware Network (SWAN). The idea behind SWAN is to
distribute WLAN functions to various devices in the net, as
appropriate. Cisco officials say some functions are best done on
access points, and the adaptation of IOS for these devices makes
them highly programmable, and visible to other Cisco network
resources, such as network management and network security
products.
Other functions have been shifted to the Wireless LAN Solutions
Engine (WLSE or "willsee" to insiders). Still others will be
shifted gradually to Cisco's wireline switches and routers, as
IOS is updated. The first release of "wireless aware" IOS will
be sometime in 2004, Cisco said.
For the full story, please go to:
<http://www.nwfusion.com/news/2003/1112ciswlan.html?nl>

CUVDesktop Client requiremnts for MAC and PC?

Hi
something one else know how client requeriments for MAC and PC for installing CUVDestop need it?
Thanks for your cooperation
Best Regards

If you mean CUVA review these docs
Release Notes for Cisco Unified Video Advantage, Release 2.2
http://www.cisco.com/en/US/partner/docs/video/cuva/2_2/english/release/notes/relnote_cuva22.html
Release Notes for Cisco Unified Video Advantage, Release 2.1(1) and 2.1(2)
http://www.cisco.com/en/US/partner/docs/video/cuva/2_1/english/release/notes/ol15290.html
We do not support CUVA on MAC.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Client app for Windows 8.1/10

Hi all, for a while I have been working with a client application for Windows Phone 8.1, however, I noticed that there is a difference between coding the parts to binding data. I noticed that the WebClient I use in Windows Phone is not supported on Windows
8.1. So what is an alternative? Any help is appreciated
On a side note: Does anyone know of any other UI extensions for Windows 8.1 other than Telerik Primitives?
Zack Bowling

Windows.Web.Http.HttpClient is the recommended web client API on both Windows and Windows Phone.
See
Connecting to an HTTP server using Windows.Web.Http.HttpClient (XAML).

Deinstall Client 11g for win64

Similar Messages

Maybe you are looking for