Deinstall Failed Oracle 11g 32-bit installation

I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?

user13515882 wrote:
I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?open Command Window & execute the BAT file from there

Similar Messages

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Creating FRCommon system failed - in 11g Forms & Report Installation

Dear all,
When installing 11g Forms and Reports "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
I have successfully created the weblogic server 10.3.5 , and continued with 11g forms & reports. First Installed the forms & reports software, and i try to configure. after several steps of configuration i have failed when its place "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
What it is this Error.
Kindly help me.
My OS Windows
Forms and reports 11gR2
More info
When i start the configuration i have chosen Forms & Reports server and Development tools in the configuration page along with OHS.
Regards
Hamid

Hi experts,
I have the same problem when I try to install oracle Fusion Middleware 11g, is it possible that I forget some steps before, or should I install required something before continue intallation?
Best Regards.
Karim.

Is it possible to install oracle 11g 32 bit in windows 7 64 bit?

I just need some advice on installing oracle 11g 32 bit on windows 7 64 bit.
If its possible to install oracle 11g 32 bit on 64 bit please let me know how.
Thanks

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

SSIS Oracle 11g 64 bit client upgrade Issue

After the oracle client upgrade from 10g to 11g, the ssis jobs are getting failed for the BadImageFormatException. Attempt to load Oracle client libraries threw This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
But the same package with same system requirements and same sql agent configuration is wroking fine in DIT. Please find below the system configuration in both environment.
DIT
Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode since we are using the are using the .Net Provider/OracleClient Data Provider connection manager to the database .
UAT :
Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode
In UAT, Everything looks as DIT but the job is not working fine in DIT.
I have gone through all the thread related to 32 64 bit, .Net Oracle client provide but i haven't found any solution for this problem.
Can you please tell me the missed out configuration in DIT and UAT? the exact problem for this issue ? what is the oracle components required for this connection? Its urgent.
What is missing in the oracle end?
Thanks
Satheesh

32 bit apps will need 32 bit Oracle client software installed.
Hope it helps,
Greg

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Oracle 11g 64 bit - "Value too large for column" when setting Varchar2

Hello guys,
I have a machine running Oracle 11g - 64bits. And I have a table that contains a VARCHAR2(2000) field.
When I try to set the value of this field to a string that contains double byte characters, I get this error:
ORA-12899: value too large for column "QAPBG1220_11"."MYTABLE"."MYFIELD" (actual: 2433, maximum: 2000).
Although the value I'm setting is only 811 characters (€ sign).
The weird thing is that when I try to run the same query on another PC with Oracle 11g, 32 bits, It runs normally and the values are updated!!
Anyone has any idea about this? It's driving me crazy
Thanks in advance
Zahraa

create table MYTABLE
MYTABLEID NUMBER(10) not null,
MYFIELD VARCHAR2(2000)
alter table MYTABLE
add constraint PK_MYTABLE primary key (MYTABLEID);
INSERT INTO MYTABLE (Mytableid, Myfield) VALUES(1, '€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€fds€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€')
COMMIT;
On the 32 bit, this works fine. I get the record with the values 1 and 2000 euro signs.
On the 64 bits, there is one machine (oracle 11.2.0.1.0) that adds the row, but when I view it, the value shows as "????"
and another machine (oracle 11.1.0.7.0) that throws an error:
- "String Literal is too long" : if there are more than 1333 euro characters
- Value too large for column .... : if there are less than 1333 and more than 666 characters.
Any ideas?

Oracle 11g R1 Automatic Installation shell scripts

Hy Guys,
Please can someone help me with: Oracle 11g R1 Automatic Installation shell scripts. A guide, how to or a link will be wellcome
Kind Regards
Easyman
Edited by: Easyman on Feb 2, 2010 3:58 AM

Hi Easyman,
sure, just have a look in $INSTALL_CONF directory. Files starting with swInst* are referencing a response file from $INSTALL_CONF/response directory. Either use a sample configuration file or add your own response file to install Oracle.
Cheers,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
P.S.: If you have more questions about oraToolKit please contact me at: http://www.oratoolkit.ch/faq.php

Oracle 11g, 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit

We just changed over to Windows 7 64 Bit now we trying to find out what version of Fusion Middleware will run on Windows 7 64 bit. Most posting say you can't install
Oracle 11g 64 bit on Windows 7 64 bit OS, but we have found a few that say they have found away to install 11g 64 bit. Not one of them shows you the install
from start to finish and some of the posting go back to 2009!
If this has been a problem from 2009 - present can some tell why Oracle has not provided a fix or update for Windows 7 64 bit and are they going to in the future?
If anyone knows how install Oracle 11g 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit please let me know!
Thanks!
Monty

Monty,
I assume that you mean the developer tools? They are kind of in limbo with 64-bit support for the dev tools, but if you want to get the latest (as of today) release working, you can do this:
1). Install a 64-bit JDK
2). Install WLS 10.3.4 generic (use the 64-bit java)
3). Install Forms/Reports 11.1.1.2 (install only, don't configure)
4). Install Forms/Reports 11.1.1.4 (install only, don't configure)
5). Edit your PATH system variable so that it doesn't contain any parenthesis. I did this by creating a junction point for c:\program files (x86) and using the junction point in the path
6). Run the configuration utility to create the forms/reports domain. Be sure to specify the dev tools
7). Look in the start menu for the Reports Builder icon. It will be pointing to a batch file. Edit that batch file to comment out the lines that print a message and exit (because you're on 64-bit)
Not officially supported, but it works for me.
John

Steps to UnInstall Oracle 11g 32 bit Client

Hi ,
I want to Uninstall the Oracle 11g 32 bit client from my server.
Please provide the step by step instruction in order to uninstall the oracle 11g 32 bit client completely.
Thanks
Sambit

Pl post exact OS details and exact 11g version.
Uninstall steps are documented - for example - http://docs.oracle.com/cd/E11882_01/install.112/e24322/remove_oracle_sw.htm
HTH
Srini

Installation of Oracle 11g 32 bit Client on Windows 7 (32 bit) laptop.

Hi,
I just got a new Laptop with Windows 7 (32 bit) operating system.
Has any one successfully installed Oracle 11g client on in Windows 7 environment and if so what are the steps involved.
In the past I have never had any trouble installing an Oracle client on a Windows work station.
Thanks,
Ashim.

Oracle hasn't officially supported 11g on windows 7. folks have installed it successfully too. Check the below threads.
Re: 11g R1 database installation is successful on windows 7 64-bit
Oracle 11g on Windows 7
Re: DB 11gR2 for Windows ??
HTH
-Anantha

Oracle 11g R2 Windows Installation hangs at 100%

hi ,
I am trying to install oracle 11g server on a laptop with windows xp sp3 - 32 bit.
the installation goes smoothly till 100% and then get stuck at stage:
spawning 'D:\app\sujrai\product\11.2.0\dbhome_2\ODP.NET\bin\2.x\OraProvCfg.exe /action:config /product:odp /frameworkversion:v2.0.50727 /productversion:2.112.1.0'
I tried few times but it fails over and over again at this same stage. I am instaling in d:/ drive
Never faced this issue before. Would appreciate any comments on this.
thanks

Hi;
Please check log file for details. What is your xp version? Home version is not supported
Regard
Helios

Oracle 11g R2 Windows Installation issue

Hey everybody,
i was trying to install Oracle 11g R2 on a Windows Server 2008 64-bit machine. During the installation i am getting an error message multiple times (about 20 times) where it says it cannot find certain files like C:\app\ora11g\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\WFMLRSVCApp.ear and some other files too. If i click move on in the dialog box each time an error occurs the installation will succeed and finish successfully.
What am I doing wrong, do I have to change anything before installation starts?
I am using the correct 64-bit installation files i downloaded from the Oracle homepage...
Edited by: user12266335 on 07.04.2010 05:32

SKramer_MuM wrote:
Hi Hans,
know I found where it contains the information about the downloads. It only shows up when you click on the "See All", but it won´t show up if you directly download via the Disk 1 or Disk 2 link on the download page. Good point. I never would have believed noobs would stop at that page and not be curious about what other stuff might be available under 'See All'. Stuff like the 'De-install' package.
Since you didn't do it, I posted a comment/suggestion in the Download forum to put an additional note on the top 11gR2 download page.
What brings up more confusion is when you click on the "See All" button next to the download for the 32-bit Version of 11g R2 for Windows an error comes up. Worked for me.
You reported your error ... where?
So I think Oracle needs to improve its homepage a lot...If you have ideas there is a forum "Forum Home » Technology Network Community » Community Feedback and Suggestions" in which you you are welcome to submit comments.

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Dbconsole start failed Oracle 11G

After installing Oracle 11G and creating a new database, I have created new db console reporsitory, with the commands:
set ORACLE_SID
set ORACLE_HOME
set SYS_PWD
set PORT
emca -repos create -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
emca -config dbcontrol db -silent -SID $ORACLE_SID -ORACLE_HOME $ORACLE_HOME -SYS_PWD $SYS_PWD -DBSNMP_PWD $SYS_PWD -SYSMAN_PWD $SYS_PWD -PORT $PORT
At the end, the command fails:
INFO: This operation is being logged at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log.
Sep 22, 2008 10:26:41 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Sep 22, 2008 10:26:44 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Sep 22, 2008 10:27:13 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
Sep 22, 2008 10:27:16 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Sep 22, 2008 10:27:21 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Sep 22, 2008 10:27:32 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /exec/products/oracle/v11.1.0/bin/emctl start dbconsole
Sep 22, 2008 10:30:40 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
Could not complete the configuration. Refer to the log file at /exec/products/oracle/cfgtoollogs/emca/HYDRA/emca_2008_09_22_22_25_54.log for more details.
When I want to start dbconsole manually, I have the following error:
emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://RD_x3650_22:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /exec/products/oracle/v11.1.0/RD_x3650_22_HYDRA/sysman/log
The logs give the following message:
emdctl.trc:
2008-09-23 00:19:32 Thread-3083821984 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Open wallet failed, ret = 28750
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: nmehlenv_openWallet failed
2008-09-23 00:19:32 Thread-3083813792 ERROR ssl: Error initializing SSL
2008-09-23 00:19:32 Thread-3083813792 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
2008-09-23 00:19:32 Thread-3083813792 ERROR main: nmectla_agentctl: Error connecting to https://RD_x3650_22:3872/emd/main. Returning status code 1
emoms.trc:
2008-09-22 23:07:08,275 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendClusterIntegration
2008-09-22 23:07:08,276 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNodeIntegration
2008-09-22 23:07:08,277 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.479 - Integration Class not found: oracle.sysman.pp.common.ui.intg.ProvCommonIntegration
emagent.log:
2008-09-22 23:06:59 Thread-3083801408 EMAgent started successfully (00702)
2008-09-22 23:14:56 Thread-3083817792 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-22 23:14:57 Thread-3083817792 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:57 Thread-3083817792 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-22 23:14:58 Thread-3083817792 EMAgent started successfully (00702)
2008-09-23 00:14:00 Thread-3083813696 Starting Agent 10.2.0.3.0 from /exec/products/oracle/v11.1.0 (00701)
2008-09-23 00:14:01 Thread-3083813696 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:01 Thread-3083813696 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-23 00:14:03 Thread-3083813696 EMAgent started successfully (00702)
I've tried this:
- set correctly TIMEZONE,
- configure secure dbconsole (emctl secure dbconsole),
- stop service nscd,
- change the port number,
- recreate the repository....
But the problem still occurs...
Has someone another idea?
Thank You
Anne

I found the problem. Since I added NIST FIPS 140-2 in the database by add a file
$ORACLE_HOME/ldap/admin/fips.ora
SSLFIPS_140=TRUE
This cause the Agent not start. Do you have any suggesting?
Thank You

Deinstall Failed Oracle 11g 32-bit installation

Similar Messages

Maybe you are looking for