Deinstall Oracle option not shown!

Hello,
What is the the reason OIU while run with ./runInstaller don't show the welcome page and option to deinstall the products.Why it happens sometimes?
Thanks,
S.Mann

It doesn't happen, unless you perform a silent install and handle the options to not to show the welcome page.
Could you specify what's the product, the Version and the OS you are referring to?
~ Madrid

Similar Messages

Hdmi option not shown in preferences

hdmi option not shown in preferences

What are you expecting?
Do you have anything connected to the HDMI port?

IN MY MAC option not shown on Mail left bar

Hello everybody:
     I hope I can get some help on this.
     I use Mail for all my email activities.
     I like to move items from the Inbox, to a respective folder, using the right click, then Move to, and then it will appear the list of my folders.
     With the new Mountain Lion, A new step occur, since now I have to got through the In My Mac, and then the list of folder will appear. Previously, the In My Mac will appear in the left bar, but now It will only appear if I have the iCloud account activated. Something not optional, since this is my work Mac, and I use personal stuff in a different User Account.
     The main question is: How can I make to Appear the IN MY MAC option in the left bar on Mail?
Thanks!
Federico

The first thing you need to do is to solve the problem of not being able to sign into iCloud. Please describe your problem with that on the iCloud for Mac section.
By the way, in the future try to use a reasonable short subject instead of trying to type your entire problem into that field.

Shared photo stream option not shown in settings

i downloaded ios 6 in around the first hour that it was launched and i cannot find the menu that can turn on shared photo streams. i have a 4th gen ipod touch. i looked in the settings under the photos and camera menu as well as the share button on a picture in my camera roll, and it is not there.

I just figured the solution out! It worked for me..
The iCloud terms of use has changed, so this option is disappeared. You have to agree with the new terms.
So delete the icloud from your iDevice and, add it again.
Hope it work 4 u..

Bluetooth call option not shown

Dear All,
i am not having option that call from laptop using Bluetooth. I can play music but not option to make a call.
Windows 7 having this option and working ok.
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
It still exists. You could follow this article to get it:
How To Use Bluetooth In Windows 8
http://www.informatives.net/how-to-use-bluetooth-in-windows-8/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Facebook option not shown in Mail Setup

I see all of the mail and Twitter options and the System Preference but I don't see FaceBook.
Thanks

Facebook integration is coming this fall in the form of an update.
Matt

None option not shown in ma phne after following all d steps

there is no none option after following all the steps

I have no idea what you are talking about.

User Interface option not shown

Just installed Adobe Creative Cloud ->Flash Professional CS6 --My question is, I'm trying to change the user interface to dark grey. the program installed in white. When I go to Edit->Preferences->General there is no "user interface" option. Anyone know how to fix this?

Hi,
You can install any CC application if you have a valid creative cloud subscription. Please try the following
1. Install Adobe Creative Cloud desktop application from https://creative.adobe.com/products/creative-cloud
2. Login with your Creative Cloud credentials
3. Click on the Apps section where you will see the list of cc products for installation under FIND NEW APPS category
4. You should find Flash Professional CC and Mobile Device Packaging for installation
Thanks!
Mohan

Planning Option Not Visible in Configuration Utility

Hi Everyone,
I have created a Planning Application long back (Classic Application) [9.3.1]. Now we are about to create a new application. The stramge thing is that I am not able to see the Planning option in Configuration Utility. Previously I have installed EPMA and also cofigured the same, But never used EPMA. Now I have created a user in Rdbms and tried to create a Datasource for my new application. Unable to see the option where I can create datasource. Please guide what should be done. (able to see EPMA options like deploy server, configure databse, etc)
I am able to access planning web and access my old Planning application. In fact also able to open Planning application wizard.(Here it asks for datasource).

Hi John,
I am also facing the same problem --- "planning option not shown at all in config utility". Scenario is also the same, some days ago BPMA has been installed though not in use. Planning is working properly, but now, when I want to create another datasource for another application creation, no planning option is showing.
In C:\Hyperion\common\config\product there is no planning folder exists. Could you please suggest how to resolve this issue?
Thanks & Regards.

When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

How to deactivate the rosetta option if it is not shown in information page

Hi,
by accident or why ever I clicked the option "start with rosetta" on my eyetv.app. STRANGE now the option is no longer viewable in information field and I can't start the application inside of the application folder because I get then the message "EyeTV can't run under Rosetta-Emulation" please deactivate the Option via Menu Ablage and unmark the option. BUT I can't see this option in information field. AND if i try to start the eyetv.app in an folder outside of applications it works.
Anyone an idea

Hi,
thank you for the hint with command+i BUT THIS DOES NOT help of course, because I already wrote that I used this.
I solved it now in different way which leads to a general question that somewhere the osx seems to note versions of programs and how to open them.
Description of this issue now in detail:
- I installed EyeTV in Version 3.0 on OSX 10.6 and started it.
- a message appears that this program is not made for this OSX version (it was made for 10.5)
- stupidly Elgato has no direct access to update from 3.0 to 3.1.2 which works with 10.6 WHICH means EyeTV has a buildin update BUT is useless if you can't start this app
- OK this leads me to idea to enable the "Start with Rosetta option"
- Didn't work
- I took then an 3.1.2 Version from my TimeMachine Backup and copied it over the old ones
- tried to start it and the message appear "This cannot run in Rosetta Mode"
- HERE IT COMES the little option field where you can disable or enable Rosetta in the information of the eyetv 3.1.2 is not shown so I was unable to disable it of course
- so i copied the file to a different directory and it works there normally
- ..... AFTER 2 hours i remembered that I had set the "Start with Rosetta" option on version 3.0 and the Snow Leopard seems to have noted this somewhere and i need a trick to see this option and the only way is to use a version 3.0 file maybe the option will appear there again
- ok copied Version 3.0 over the 3.1.2
- AND AH the rosetta option appears and was enabled and I had here the possibility to disable or unmark it
- then copy back the 3.1.2 Eyetv version file and AH it runs
So imagine that someone else uses today an application which really needs rosetta, and a user activates this and after some month a Snow Leopard 64bit version comes and nobody tells the user to deactivate the rosetta version on old package before installing new one.... poor user, I guess the 64bit version will tell the crap "This application can't run under rosetta" and the user will never find the way to disable it.
Hope there is a better way to find out for which application in which version was set the "start with rosetta" option in the system.
IF ANYONE KNOWS PLEASE let me know

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

First, back up your old iphone manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved: http://support.apple.com/kb/HT1766
How to back up and restore: http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
This is also explained in this article: http://support.apple.com/kb/HT4137

I bought a new computer and tried to authorize it. It states that I already have 5 computers that are authorized. I no longer have any of those 5 computers. How do I deauthorize all of them, as it is not shown as an option, as my new computer can'

I bought a new computer and tried to authorize it. It states that I already have 5 computers that are authorized. I no longer have any of those 5 computers. How do I deauthorize all of them, as it is not shown as an option, as my new computer since it is not authorized.
Thanks

You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

Business Rules:Non-oracle db connections not shown in the ADF-BC Facts sect

Hi everyone
I'm working with Oracle BPM 11.1.1.5.0
JDeverloper: 11.1.1.5.0
Database : SQL Server 2008.
I'm trying to create some rules based on some value in my tables in the database.
The problem:
My non-oracle DB connections are not shown in my Business rule, in the ADF-BC Facts section on the Facts tab.
I have two oracle db connections and one SQL Server connection, and all three have been working perfectly before.
But in the business rules facts section, when I want to add a new ADF-BC fact, only the oracle connections are shown.
I have tried recreating all of them a few times, re registering my sqljdbc jar file, creating a new test application from scratch, but none seems to work.
Can some one give me any hint please?
Thanks in advance

has anyone else had this problem ?

Print option in iview tray not shown

Hi all;
I have a WebDynpro JAVA application embedded in an iview . The iview configuration has its "show Tray" option set to true and the "show Print option" in Tray also turned to true. The problem is that when i navigate to the iview, the print option is never shown in the Tray.
Does anyone know why the Print option in Tray is not shown?
I´m working with SAP Netweaver 2004s
Thanks!

Hi,
Printing from Web Dynpro for Java is only supported from NWCE and 7.2 onwards, if I remember correctly
See http://help.sap.com/javadocs/NW73/SPS01/CE/wdr/com.sap.wdr/com/sap/tc/webdynpro/clientserver/print/api/IWDPrintService.html for more info
However, you could recreate your table using html/jsp, and open the rendered JSP in a popup. This way you should be able to use javascript print function, see /people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities
As for exporting your context data to Excel, have a look at this article
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/edc2f3c2-0401-0010-8898-acd5b6a94353

Deinstall Oracle option not shown!

Similar Messages

Maybe you are looking for