Deinterlace filter options
the deinterlace filter in fce 4.01 has 5 options
1. upper
2. lower
3. flicker filter (minimal)
4. flicker filter (medium)
5. flicker filter (max)
can someone tell me the difference in these options?
Thank you in advance.
Interlaced video has 2 fields: an upper field and a lower field; from the top of the image to the bottom of the image the horizontal lines that make up these fields alternate between each other. For practical purposes you could think of the upper field being all the odd-numbered lines and the lower field being all the even-numbered lines, each representing half of the total image. (For example, 1080i video has 540 lines in the upper field; and another 540 lines in the lower field, one after another, for a total of 1080 lines.) When combined you get the full, interlaced image. This is how TV works as well as most camcorders. Some newer camcorders support progressive video in which case there are no fields; every frame is a complete image unto itself. (While not perfectly correct in a technical sense, this explanation is basically correct.) There are subtle visual differences between interlaced and progressive images.
When you select upper or lower you are selecting only one of the two fields for display ... hence the name of the filter ... deinterlace. The flicker selections slightly blur the image in the vertical dimension in order to reduce apparent flicker. The choices are simply the degree to which you want the effect applied.
If you want to know more about interlacing & fields try this article - All About Video Fields
Similar Messages
-
Filter option is not working in Reuse alv grid
Hi all,
Filter option is not working in alv grid properly.
if i choose one particular field for filter option .it is working .but another field it is not working though it contains different values.please give the answer.whether i have to pass filter option throuogh reuse_alv _grid or not.thanks in advance
rajHi raja,
1. The search/filter is
CASE SENSITIVE
2. U can give *
to search for pattern.
(IN THAT CASE, it is NOT Case Sensitive)
regards,
amit m. -
Hi Experts,
In the ALV output we are having fields like year,period and plant.If i click on Year or period or plant and then click on filter option in ALV it is giving a select option and then click on the F4 Help in the selection option,it is giving the list of option once i select any one of the value it is displaying(for eg:Year) as '2004####'.Then if we click ok it is showing error instead of '2004####' it should be '2004' after selection.
Is there any way to rectify this?????Please reply ASAP.
Thanks
Raj.Hi
If it is YEAR (type is GJAHR) .... and passing the value as '2008'.
Hi Guys,
Did anyone come across this situation??
Thanks
Raj. -
Sort and filter option missing in table view
Hi,
I am not able to see the sort and filter option for all the columns in table view. Could anyone please help me if i need to add something to see that option.
Thanks,
Kamesh BathlaHi,
Thanks for the reply, yes its web UI issue, i am having search and result view and i need sorting option for all the columns in result view. I thought that it is standard functionality, do i need to add something to html file or anyother place to see the sorting options?
Regards,
Kamesh Bathla -
Filter Option in Table Control
Hi Folks ,
I am working on a table control , i need to add Filter functionality same as of ALV filter
i tried with suggestion given on SCN
Following is the code that i tried, but its not working, no popup with FM LVC_FILTER_DIALOG
please help me with sum more suggestion or sample code
DATA : cp_vbak LIKE it_vbak OCCURS 0.
DATA : it_fieldcat1 TYPE lvc_t_fcat,
wa_fieldcat LIKE line of it_fieldcat1,
it_group1 like lvc_s_sgrp occurs 0,
ls_group LIKE lvc_s_sgrp,
filter_ranges TYPE lvc_t_filt.
DATA: counter TYPE i.
counter = counter + 1.
wa_fieldcat-col_pos = counter.
wa_fieldcat-fieldname = 'VBELN'.
wa_fieldcat-tabname = 'IT_VBAK'.
APPEND wa_fieldcat TO it_fieldcat1.
CLEAR wa_fieldcat.
counter = counter + 1.
wa_fieldcat-col_pos = counter.
wa_fieldcat-fieldname = 'VKORG'.
wa_fieldcat-tabname = 'IT_VBAK'.
APPEND wa_fieldcat TO it_fieldcat1.
CLEAR wa_fieldcat.
counter = counter + 1.
wa_fieldcat-col_pos = counter.
wa_fieldcat-fieldname = 'VTWEG'.
wa_fieldcat-tabname = 'IT_VBAK'.
APPEND wa_fieldcat TO it_fieldcat1.
CLEAR wa_fieldcat.
counter = counter + 1.
wa_fieldcat-col_pos = counter.
wa_fieldcat-fieldname = 'SPART'.
wa_fieldcat-tabname = 'IT_VBAK'.
APPEND wa_fieldcat TO it_fieldcat1.
CLEAR wa_fieldcat.
ls_group-SP_GROUP = '0001'.
ls_group-TEXT = 'VBELN'.
append ls_group to it_group1.
clear ls_group.
ls_group-SP_GROUP = '0002'.
ls_group-TEXT = 'VKORG'.
append ls_group to it_group1.
cp_vbak[] = it_vbak[].
CALL FUNCTION 'LVC_FILTER_DIALOG'
EXPORTING
it_fieldcat = it_fieldcat1
it_groups = it_group1
* IS_FILT_LAYOUT =
* I_NO_DIALOG =
* IT_EXCEPT_QINFO =
tables
it_data = it_vbak
CHANGING
ct_filter_lvc = filter_ranges
* EXCEPTIONS
* NO_CHANGE = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Need to code more for Filter the internal tableHi Pihu,
I am also trying to implement the filter functionality in a Table Conntriol.
I have used following two function modules to handle the filter option.
1. CEP_DOUBLE_ALV: You will get the pop up to select you filtering fields.
2. LVC_FILTER_DIALOG: Second pop up to select the filtering data for the fields selected.
But the second FM is giving an error 'filter internal error : 15'
If u have already implemented this functionality, can u give me the sample code.
Thanks in advance,
Sai -
Problem in ALV set filter option
Hi to all
I have an issue regarding ALV report :
I have developed an ALV report and it is showing report output correctly as required.
when I further filter it on a particular field using SET FILTER OPTION , the length of the field is shorter than displayed.
Why this happens so.
BUT for the same field in a standard ALV report , it shows the same length as displayed in report.
Please advice. As this is the standard ALV functionality.
Thanks & Regards
Anubhav guptaHi Gupta,
<li>Define layout structure
data: wa_layout TYPE slis_layout_alv.
<li>Pass value like below
wa_layout-colwidth_optimize = 'X'.
<li>Pass this structure through fm
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = program
it_fieldcat = it_fieldcat
is_layout = wa_layout
it_events = it_events
TABLES
t_outtab = i_mard.
Thanks
Venkat.O -
Belle: No WLAN and Packet Data log.Filter options ...
In Nokia N8, with Symbian Anna, WLAN and Packet Data logging wasn't possible, even though there were options in the log filtering settings.
See below:
http://i44.tinypic.com/9kxbfa.png
After updating to Belle, log isn't still working, and both WLAN and Packet Data options were removed from filter options.
http://tinypic.com/r/6dxwgg/5
Will it be implemented in a further time?
Best RegardsHi,
quick update on this one as we now have a FAQ online.
Q: How can I get a WLAN/Wifi and packet data filter with Nokia Belle?
A: There is no data filter included in Nokia Belle by default, but you can download specific apps from Nokia Store.
BR,
yvonne -
Want to use presentation date variable in Advance SQL filter option
Hi,
I want to use presentation date variable in Advance SQL filter option.....I am getting the below error.
SQL in Advance SQL filter ----
"Fact Status Details"."Load Date" =
(select min(Cast("D Time"."Business Date" as char))-1
from "D Time" where "D Time"."Operational Month Sk" =
(select "D Time"."Operational Month Sk" from "D Time" where date '@{Date1}'=cast("D Time"."Business Date" As char)))
Error ---
Error getting drill information: SELECT "Fact Status Details"."Load Date" saw_0 FROM "Pre RFAI Sales" WHERE "Fact Status Details"."Load Date" = (select min(Cast("D Time"."Business Date" as char))-1 from "D Time" where "D Time"."Operational Month Sk" = (select "D Time"."Operational Month Sk" from "D Time" where date '@{Date1}'=cast("D Time"."Business Date" As char)))
Error Details
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
SQL Issued: {call NQSGetLevelDrillability('SELECT "Fact Status Details"."Load Date" saw_0 FROM "Pre RFAI Sales" WHERE "Fact Status Details"."Load Date" = (select min(Cast("D Time"."Business Date" as char))-1 from "D Time" where "D Time"."Operational Month Sk" = (select "D Time"."Operational Month Sk" from "D Time" where date ''@{Date1}''=cast("D Time"."Business Date" As char)))')}
Load Date format ---YYYYMMDD
Please advise...i need to fix this issue urgently.Thanks for your reply.
Could you please help me with the correct code...i tried to correct it....
"Fact Status Details"."Load Date" =
(select Cast(min("D Time"."Business Date" )-1 as char)
from "D Time" where "D Time"."Operational Month Sk" =
(select "D Time"."Operational Month Sk" from "D Time" where Date'@{Date1}'=cast("D Time"."Business Date" As char)))
Please let me know if i am wrong..this code is also not working. -
Filter option in Report Painter GRR1
Dear Experts,
I have created a report using the the T code: GRR1. The layout is as follows
Expenditure
Department A
Department B
Department C
Department D
Department E
Power & Fuel
Other expenses
Each department having 20 cost centers. I have created the report and assigned in 1SIP report group.
I am able to get the results in the report S_ALR_87013611.
I am able to see the department wise costs in that report.
My Requirement is:
I am expecting a filter in the departments mean to say I want to select few cost centers in the department A after executing the report.
I am expecting a filter in the column heading.
Is it possible. Please guide me.
ThanksDear Experts,
Thanks for your responses,
I hope my requirement is some what critical through report painter (Filter Option).
Please check the following, is it feasible?
Expenditure
Department - A
Department - B
Total - 20 cost centers
Total - 10 cost centers
Cost center
Rs
Cost center
Rs
Salaries
Cost center A1
1000000
Cost Center B1
700000
Tours & Travel
Cost center A2
200000
Cost Center B2
140000
Machine Expenses
Cost center A3
6000000
Cost Center B3
4200000
Repairs & Maintenance
Cost center A4
70000
Cost Center B4
49000
Labour
Cost center A5
800000
Cost Center B5
560000
Total
8070000
5649000
I am going to hard code the cost center group in the cost center report.
I am expecting the report result as mentioned above.
Is it possible.....?
Thanks..... -
How to Add a filter option for a entire table to a search button?
Hi all,
I am new to SAPUI5. i am having a table with hard coded data's.and i have a search field.
i want to add a filter option to the search field for the entire table..
i can able to add a filter option to the column by using filterProperty.
is there is any method or property to do that?
PS - i have attached my table code.
Regars
DayalanHi Dayalan,
documentation for filtering and sorting is in this section of the Developers Guide.
Cheers
Graham Robbo -
How to hide Print and Filter option from dynamic ALV
Hi,
I have created the dynamic ALV. now User don't wan't Filter , export,print Option on the ALV dispaly.
Could you please tell me How to hide Print and Filter option from dynamic ALV.
Thanks and regards
Amita.Hi,
Please go through the following link to get an better idea on ALV.
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9&overridelayout=true]
This is the code which you have to write in WDDOINIT
DATA LO_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
LO_CMP_USAGE = WD_THIS->WD_CPUSE_ALV_TEST( ).
IF LO_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LO_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
DATA LO_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
LO_INTERFACECONTROLLER = WD_THIS->WD_CPIFC_ALV_TEST( ).
DATA LO_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
LO_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_EXPORT_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_PDF_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( abap_false ). -
Bring back the Filter option in Search results
Well, not only Sorting is messed up (removed) from the latest realease of Spotify, filtering is as well. You can no longer filter (ctrl-F/cmd-F) your search results, and, as with many other great features killed without explanation, we want this one back as well. Thanks!
PS. You can manually bring back the old search - including sorting and filter options - if you write "spotify:search:[search term]" in the search field.Is there a business reason why this feature hasn't returned, despite a huge number of complaints? (Matt Suda - does he work for Spotify? - writes in this thread that it is coming back but its status is still "Watch this space" in the monthly ideas review). I can think of a few business model reasons that Spotify doesn't want its customers to have filter/search. For example: 1- I bet it's reduced the amount of use by customers like me, so the business gets the "Health Club" revenue stream - loads of subscribers who don't use the service much. 2- Perhaps its a way of increasing use of the Facebook aspect of Spotify and so creating more advertising revenue. If we are wasting our time and effort asking for the return of this feature then please, Spotify, just tell us and we will vote with our wallets after examining the competition.
-
After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed
Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambarHi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Power Map filter option missing
I have an end user who is more of a power user in the company. They're using Power
Maps add-in for excel and are expecting this
filter option but its currently not displayed. I have run all MS updates after the add-in was installed as well as a restart to the system.
I have also found other articles about manually updating office but
those options aren't available in our version of office (pro plus x64 15.0.4675.1000). The registry keys are not even there.
I deployed our MS office via GPO startup script and MSI file.
Has anyone run into this or have even a hint as to what may be wrong?Hi k4rizma858,
According to your description, you said"I deployed our MS office via GPO startup script and MSI file. ", it seems you’re using Microsoft Office 2013. I regret to tell you, Office 2013 doesn’t support the filter function of Power Map,
and Power Map is an unsupported add-in in Office 2013. Please read this content:
https://support.office.com/en-in/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Microsoft updates to Excel Power Map with two big features, Power Map Filtering and Custom Maps in September 2014, and the features of Power Map are only enhanced for Office 365. You can get these messages from these links:
http://blogs.office.com/2014/09/09/excel-power-map-september-update/
http://microsoft-news.com/microsoft-updates-excel-power-map-with-power-map-filtering-and-custom-maps/
Thus, if you really need to use the filter function of a map. You can use the Office 365 to fulfill your needs or you can try to use Bing Maps in Office 2013.
Hope it’s helpful. -
Smart playlist doesn't include "Release Date" as a filter option
Why is "Release Date" not one of the options? I recently upgraded my hard drive and had to re-import all my podcasts, which meant they ALL dropped into the "Date Added is in the last 2 weeks" filter, which meant I couldn't synchronise my iPod! I had to go through and change the settings to be restrictive, but in such a way that I'll have to go back and change them all in another week or so.
If "Release Date" was in the filter options, this would simply not be an issue.With a solid backup/restore strategy you should never need to reimport anything.
I don't know the details of your playlist, but another way to have dealt with this might simply have been to temporarily uncheck the newly-imported episodes you didn't want going to the iPod.
tt2
Maybe you are looking for
-
How do i use additional hard drives for application installation
I have close to a terabyte of drives on my new mac pro and would love to use one of the other hard drives to install applications on- especially my windows applications- like solidworks. However every time i try to install something to my mac it wont
-
How can I count a method executed numer of times.
Hi, I want to count that a method executed particular no.of times. If it crosses N no.of times then i should print the count and i should reset the count to zero. I have tried but i havn't get any idea to do it....Could you please give me some ideas
-
I'm using an Ipod video 30gb on windows xp. It worked perfectly for a while, but then wouldn't store any videos or movies. i reset the ipod and unistalled/reinstalled I-tunes, and then synced my Ipod again. Now it doesnt store anything, but but 'sync
-
Hi everybody Can you plesae tell me whether its possible to call a smartform from a webdynpro application? I know its possible to call adobe forms
-
Profiling RT Extreme... (Final Cut HD 4.5)
Hey all... i'm new to the mac world...just got it a month ago. everything was good until.... i've intalled FCP4.5 it worked...and all the other software..like soundtrack, motion, comprssor and what not... now FCP won't start!!! FCP does boot up to a