Deinterlacing/upscaling 480i method for detail upscaling

I've been searching for the best upscaling method I can use for a potful of 480i clips I have to work with in a 1920x1080 HD output project. I need to blow them up from 100 to 150%.
I'm using detail preserving upscale effect and here's how I go about it:
1. I put the 480i clip into a 1920x1060 project, then choose "interpret footage", then "off" in the field selection area:
2. I then apply the detail preserving upscale effect to the clip, scale it up to 150% and then output it and consider it done.
Does this sound reasonable? I have tried turning the clips into progressive clips and then running them through Instant HD, but the results were dissapointing.
Any thoughts or advice would be very welcome. Thanks.

Got it. Thanks.For what it;s worth, I'll post the workflow as I understand it. Tests so far look reasonably good, especially since I'm not blowing my 480 clip all the way up cover 1920x1080. Anyway, perhaps this will help someone else:
1. Open a sequence using the 720x480i clip.Open the Interpret Footage box,and under Main choose lower field first under Seperate Fields and also choose Preserve Edges.
2. Then open that compositions' dialogue box and change the ratio from 720x480 to 1920x1080 and double the frame rate. In the case of my clip that would be doubling to 59.94 from 29.97..
3. Then copy that comp into a new comp of 1920x1080 with a frame rate of 29.97. Select Frame Blending and outpu to progressive.
If anybody sees a dead rat in here anywhere, please let me know.

Similar Messages

DoDml() method for header not callled.

Hi,
I have two tables one is for header and second one is for details.
there is a foreign key relationship of headerId between these two tables.
I have create only one page for header and details data insertion.
when i run the page and going to save data for both the tables then it gives error like:
integrity constraint (FPC.FPC_ISUPP_PROMO_DETAILS_FK) violated - parent key not found
at fpc.oracle.apps.fpc.promotion.server.FPC800PromotionInsertAMImpl.saveData(FPC800PromotionInsertAMImpl.java:33)
at fpc.oracle.apps.fpc.promotion.schema.server.FPC800PromotionDetailEOImpl.doDML(FPC800PromotionDetailEOImpl.java
I have checked my EO's method , basically it's called doDml() method for details but not for header. please suggest..

doDML() method won't be called if the header row is not changed...
How you created child rows?
have you done following code?
HeaderVOImpl hvo = am.getHeaderVO();
HeaderVORowImpl hrow = hvo.getCurrentRow();
LineVOImpl lvo = hrow.getLineVO();
Row lrow = lvo.create();
lvo.insert(lrow);
and in the pageLoad you need to initialize the header's primary key so that child created through that row will be in synch with header.
--Prasanna

One or more post-processing actions failed. Consult the OPP service log for details.

hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
pritesh

hi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT   -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id

My previous method for payment on itunes was debit card but now I dont have one. How do I change to no card without creating a new apple id? It tells me to update payment details when I try to update apps but it only has visa, mastercard, amex and maesto. I dont have any of them. I did previously use visa but I dont have the card anymore and cant get another one. Please can someone help me set it up so I dont need a payment method. Thanks

Thanks for you reply. Is that the only way as it would cost me £15?

Error : FZ010 : Enter a payment method for incoming payments

Hi,
I am running F110 and paying intercompany vendors/customers.
I am running payment run for Compony 0050 and paying my vendor VEND0060 and CUST0060.
The balance of vend0060 is 2 million(credit) and balance of CUST0060 is 1 million (Debit).
So I am going in Reallocate and changing the bank details as getting exceptioin in CUST0060. But it gives out an error "Enter Payment method for incoming payments"
We have just configured outgoing payment and actually as credit balance is more, it should not give this error.
Does any one know solutin for this?
Error in details:
Enter a payment method for incoming payments
Message no. FZ010
Diagnosis
The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
System Response
The payment method is rejected.
Procedure
Enter a payment method for incoming payments.
Thanks
JR

In the master record of the customer/vendor, ensure that the appropriate payment methods are maintained. If you click on F4 on the payment method field, you can see different methods available for Incoming Payments and different methods for Outgoing payments.
Assign points accordingly.
Thanks,
Madhav Nanduri

How to change the score method for ses crawler table result?

Hi,all
There is a customer urgent requirement,they want customize methods to score the result which come from database same table different column source for relevancy boosting.For example.there is a table t_table which have 3 column:name,short description,long description.Now i create 3 source for this table,every source has different content column.source 1's content column is name,source 2's content column is short description,source 3's content column is long description,is it possible for me to define the priority for those 3 source.For example,source 1 's priority is 50%,source 2 's priority is 30%,source 3 's priority is 20%.
By the way,i wonder that exists a API to fetch the result set score attribute and primary key value?
any advice is appreciate.

Kevin, have replied via internal mailing list on this. There is an undocumented method for boosting relevance by section. It is considered experimental at the moment and the exact details may change before we include it as a standard feature.

Issues in using LSMW IDOC method for Article Hierarchy

Hi Experts,
I am working on a scenario for uploading article hierarchy using LSMW idoc method.
Details:
Message type WMATGRP
IDoc type WMATGRP01
But as per my understanig, for processing, there should be a inbound Function module/Process code. But I am unable to find out any process code for this in tcode WE42/We60.
Could you please help in this problem.
Regards
Krishan Kumar

Hi Saeed,
For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
Regards,
Madhu.

Error: No permitted payment method for Payment Praposal in F110

Hello Experts,
I am trying to tigger an Idoc for payment from F110 and am getting the following error:
Job started
Step 001 started (program SAPF110S, variant &0000000002133, user ID )
Log for proposal run for payment on 27.01.2005, identification
Additional log for vendor 3803 company code 3000
Due date determination additional log
Document 1900004238 line item 002 via USD      100.000,00-
Terms of payment: 27.01.2005    0 0,000 %    0 0,000 %    0
03 days grace period is being considered
Payment must take place before 30.01.2005; next payment on 26.04.2008
Item is due with 0,000 % cash discount
Payment method selection additional log
Payment method selection for items due now to the amount of USD      100.000,00-
Payment method "C" is being checked
Bank details are being checked
System reads house banks and checks if they are allowed
Our bank 3000 is being checked
Bank different from the specified bank DBKA in master record or items
Our bank 3200 is being checked
Bank different from the specified bank DBKA in master record or items
House bank is selected ...
No permitted payment method exists
Information re. vendor 3803 / paying company code 3000 ...
... payment not possible because of reported error
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001217, user ID )
Step 003 started (program RFFOEDI1, variant &0000000000042, user ID )
Program RFFOEDI1: No records selected
Step 004 started (program RFFOAVIS, variant &0000000000044, user ID )
Program RFFOAVIS: No records selected
Job finished
Plesase suggest its very urgent.
Thanks,
Suma
Edited by: Suma B on May 3, 2008 9:42 AM

check payment in vendor master or invoice line items. May be payment method entered in parameters is different from vendor master data and invoice.
Check Payment method configuration for country and Company code
In Payment method for company code
check
minimum and maximum amount
foreign payments allowed or not
Check Bank determination for paying company code combination with payment method

When bouncing- what's best method for smallest file size/highest quality?

I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
Thank you...

MUYconfundido wrote:
I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
I basically need them to be about 3 mb each.
So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
!http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
Length of the piece? And does the .Wav bounce you have sound OK?

Failed to retrieve a schema URI (document namespace) for /userprofiles/emailNotification.usr; please see the following exception for details

I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?

If you have a support contract please open a case so we can work through
this problem.
Can you run an sqlplus session on your database, execute the commands
"delete from data_sync_item" and "commit", then resync to see if it will
get you around the problem. The data_sync_item table will be fully
populated after you sync. This should get you running.
Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
in size -- the CLOB would be smaller in the data_sync_item table.
I would recommend using the Version Checker against your installation --
find it on the dev2dev.bea.com site to see if the upgrade installer work
ed properly. Also consider running the full installer to avoid possible
problems that might occur with upgrade installers.
As a result of that patch you referenced in 4.0 the CLOB handling logic
was changed in 7.0 -- this is why it is strange you are seeing cleaving
errors. In 7.0 SP2 to be release next week the data sync and
persistence code was changed also.
Are you using the OCI or Thin driver?
-- Jim
Rob Goldie wrote:
Jim Litton <replyto@newsgroup> wrote:
Rob,
The CLOB issue was related to wlportal4.0 and should not be a factor
in
7.0.
Could you post the entire stack trace?
####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
<main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
please see the following exception for details.>
Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
to analyze and/or cleave document]
     at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
     at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
     at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
     at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
     at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
     at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
     at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
     at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
     at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
     at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
     at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
     at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
     at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
     at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
     at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
     at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
     at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
     at weblogic.j2ee.Application.addComponent(Application.java:294)
     at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
     at $Proxy9.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
     at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
     at weblogic.Server.main(Server.java:32)
Caused by: org.xml.sax.SAXException: No message available. Resource not found:
repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
     at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
     at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
     at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
     at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
     at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
     at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
     at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
     at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
     at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
     at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
     at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
     at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
     at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
     at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
     at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
     at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
     at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
     at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
     at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
     at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
     at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
     at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
     at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
     at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
     at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
     at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
     at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
     at weblogic.j2ee.Application.addComponent(Application.java:294)
     at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
     at $Proxy9.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
     at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
     at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
     at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
     at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
     at weblogic.Server.main(Server.java:32)
Are you using a UTF-8 Oracle database?
Yes
If you create a new User Profile in the EBCC and compare it to your
migrated .usr file do you see differences in the DTD's?
I recreated a new version of the .usr in the EBCC, and still got the same error.
I also tried deleting everything from the data-sync-item table and re-synching.
What does the DocumentManager section of your application-config.xml
look like?
<DocumentManager
ContentCacheName="documentContentCache"
ContentCaching="true"
DocumentConnectionPoolName="default"
MaxCachedContentSize="32768"
MetadataCacheName="documentMetadataCache"
MetadataCaching="true"
Name="default"
PropertyCase="none"
UserIdInCacheKey="false"
/>
What does the document.jar Targets="" parameter look like in config.xml?
<EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
-- Jim
Rob Goldie wrote:
I get this exception (and long stack trace) when attempting to start
my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
using Oracle 8.1.7. I upgraded this application from weblogic portal
4.0, and never had this problem there. As part of the migration process,
I ran the tool to migrate all of the database tables, and I re-synched
the EBCC project using version 7 of EBCC. I did a search for this problem
and found a few mentions of it that seemed to be related to Oracle's
handling
of CLOB data. Apparently, there is a patch, but I can't seem to find
this patch. I'm also not sure if this is indeed the problem since I
didn't have this issue with the older version of weblogic using the
same database. Any suggestions?

UCM API Methods for PDF Water Marking and Time stamping ???

hi,
i am working on project, the requirment is we need to migrate from DMS (DIGI SAFE) To UCM.
here we need to approch through API, it should not through tool based functionality. document should be water marked and time stamped when we retrived the document through CIS.
is there ant UCM API's for water mark and time stamp ??? please provide the methods for it. is there any API mehtods for Document versioing ??
i am presently working windows 7 OS ? i am trying to install UCM 10gR3 in Windows 7 OS, will it support for UCM ??
any help would be apprciated.
Regards,
YT

Hi,
There are services in Content Server that will allow you to create revisions of existing items. For example, CHECKIN_UNIVERSAL service will check in a new revision of an item if that Content ID already exists. You can also checkout a document if needed using the CHECKOUT service. Please refer to the services reference guide for more details (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e11011/toc.htm).
Regarding conversion and watermarking...
You don't have to call a service to convert or watermark a document. These features have to be configured on the server. If you configure the content server to convert Word documents to PDF, then whenever a Word document is checked in, the content server will automatically convert it to PDF. In addition, if you have PDFWatermarking enabled and configured, watermarks will be applied automatically as well. All you have to do is ensure the product is configured correctly for the formats you want, and then check in the document. When you retrieve a document (using the GET_FILE service for example), you can ask for the PDF version by passing additional parameters.
Please review the Application Administrators Guide (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10978/toc.htm) for info on enabling and configuring PDF Watermarking.
The doc links referenced above are for UCM 11g. The same docs are available for 10gR3 at http://download.oracle.com/docs/cd/E10316_01/ouc.htm.
--Vijay

Best method for duplicating a page layout

As you may have seen form my other detailed queries I am struggling to relpicate layouts to new pages.
What is the best method for this?

Unfortunately, these alternatives have proved less that problem free.
For more information see:
http://forums.adobe.com/message/5196194#5196194

Best method for networking with ubuntu linux

Hi,
I'm setting up an ubuntu linux fileserver, and I was wondering what the best method for filesharing with my mac is. I'm currently running osx 10.4.11, though I may be upgrading to 10.5 soon. I'll be running SMB networking for a couple of other computers, but I'd prefer something a bit more robust that can handle file permissions etc.

Mac OS X supports NSF out of the box. Configuration isn't documented.
I recall Apple got rid of net info manager in Leopard, so the configuration will be different. Perhaps more unix like.
Mac OS X support the Unix Network File System (NFS). However, it leaves out
the GUI.
This page show you how to use NetInfo Manager:
http://mactechnotes.blogspot.com/2005/09/mac-os-x-as-nfs-server.html#c1168221713 40271068
NFS Manager can both setup NFS shares and connect to NFS shares.
http://www.bresink.com/osx/NFSManager.html
Once you figure out how NFS Manager configures the NFS shares, you can
use Applications > Utilities > NetInfo Manager to create more shares.
You will either have to coordinate Unix Userid number and Unix Group Id number or use the mapall option on the share.
To find out your Mac OS X userid and group id do:
applications > utilities > terminal
ls -ln
ls -l
# lists the NFS share on your mac
showmount -e localhost
#list NFS shares on a remote host
showmount -e remote-ip-address
Once you see what NFS Manager does, you will be able to use NetInfo Manager to manage a connection. In Mac OS 10.4 you can configure the /etc/exports control file. See man exports for the details. Before that you had to have the data in NetInfo manager. When Mac OS X came out, many common Unix control files were not present. Instead the data had to be in NetInfo manager. Over time Apple has added more and more standard Unix control files.
======
You do know about the need to match userids & groupids.
# display uid and gid
ls -ln
sudo find / -user short-user-name -exec ls '-l' {} \;
# on Mac OS X
you will need to go into NetInfo Manager and select user and find your short-user-name. Change uid and guid.
#on Linux look in
/etc/passwd
/etc/group
# with care...
# change 1000:20 to your values for uid:gid
sudo find / -user short-user-name -exec chown 1000:20 {} \;
The manual for Tenon MachTen UNIX (which Apple checked when doing Mac OS
X) says that one should crate the file /etc/exports, which will cause
portmap, mountd and nsfd to launch at startup via the /etc/rc file. The
file must not contain any blank lines or comments, and each line has the
syntax
directory -option[, option] hostlist
where 'directory is the pathname of the directory that can be exported,
and 'hostlist' is a space separated list of hostnames that can access the
directory. For example
/usr -ro foo bar
/etc
/Applications
/User/gladys gladys
The client the uses a command like
/sbin/mount -t type [-rw] -o [options] server:directory mount_point
where 'type' is 'nfs', 'server' the name of the server, 'directory' the
server directory mounted, and 'mount_point' the client mount point. See
'man mount' for details.
I haven't tried the above, but it would be nice to know if it works on Mac OS X.
Hans Aberg
This will give you some hints on NFS. Post back your questions.
Robert

Error in compiling Flex application (1). Consult log file for details.

Dear All,
when i deploy the application from VC i am facing the below issue.
Error in compiling Flex application (1). Consult log file for details.
Please help us.
Regards,
Suman

Hi Juan,
Please look into the below issue.
Error in compiling Flex application: java.lang.InternalError: Can't connect to X11 window server using '172.16.12.41:0.0' as the value of the DISPLAY variable.
   at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
   at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
   at java.lang.J9VMInternals.initializeImpl(Native Method)
   at java.lang.J9VMInternals.initialize(J9VMInternals.java:192)
   at java.lang.Class.forNameImpl(Native Method)
   at java.lang.Class.forName(Class.java:119)
   at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
   at macromedia.fonts.JREFontManager.initializeSystemFonts(JREFontManager.java:242)
   at macromedia.fonts.JREFontManager.createSetForSystemFont(JREFontManager.java:58)
   at macromedia.fonts.CachedFontManager$FontCache.fetch(CachedFontManager.java:109)
   at macromedia.util.LRUCache.get(LRUCache.java:114)
   at macromedia.fonts.JREFontManager.getEntryFromSystem(JREFontManager.java:186)
   at macromedia.swf.builder.tags.FontBuilder.<init>(FontBuilder.java:52)
   at macromedia.css.FontFaceRule.initialize(FontFaceRule.java:82)
   at macromedia.css.StyleDocumentHandler.endFontFace(StyleDocumentHandler.java:36)
   at org.apache.batik.css.parser.Parser.parseFontFaceRule(Unknown Source)
   at org.apache.batik.css.parser.Parser.parseStyleSheet(Unknown Source)
   at macromedia.css.StyleParser.init(StyleParser.java:165)
   at macromedia.css.StyleParser.<init>(StyleParser.java:89)
   at macromedia.css.StyleSheet.parse(StyleSheet.java:71)
   at flex.compiler.parser.MxmlParser$4.end(MxmlParser.java:1123)
   at flex.compiler.parser.MxmlParser.endElement(MxmlParser.java:402)
   at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
   at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source)
   at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
   at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
   at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
   at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
   at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
   at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
   at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
   at javax.xml.parsers.SAXParser.parse(Unknown Source)
   at javax.xml.parsers.SAXParser.parse(Unknown Source)
   at flex.compiler.parser.MxmlParser.parseDocument(MxmlParser.java:4363)
   at flex.compiler.MxmlLoader.parse(MxmlLoader.java:277)
   at flex.compiler.MxmlLoader.loadComponentType(MxmlLoader.java:178)
   at flex.compiler.MxmlLoader.loadComponent(MxmlLoader.java:204)
   at flex.compiler.CachedComponentLoader.getComponent(CachedComponentLoader.java:197)
   at flex.compiler.CachedComponentLoader.loadDefinition(CachedComponentLoader.java:101)
   at flex.compiler.CachedComponentLoader.getDefinition(CachedComponentLoader.java:263)
   at flex.compiler.CompositeLoader.getDefinition(CompositeLoader.java:54)
   at flex.compiler.linker.Loader.getType(Loader.java:266)
   at flex.compiler.linker.Loader.findType(Loader.java:248)
   at flex.compiler.CompilerPackageManager.loadType(CompilerPackageManager.java:629)
   at flex.compiler.MxmlCompiler.openDocument(MxmlCompiler.java:61)
   at flex.compiler.MxmlCompiler.compile(MxmlCompiler.java:234)
   at flex.tools.Mxmlc.main(Mxmlc.java:166)
Regards,
Suman

What does this mean: -deprecation for details?

hello,i am having a problem viewing this file. whenever a compile it i get this message:
NOTE: Hint1.java uses or overrides a deprecated API.
NOTE: Recompile with -deprecation for details.
can anyone help me what this means? thanks.
here is the file:
import java.awt.*;
import java.applet.Applet;
public class Hint1 extends Applet implements Runnable{
int xPos=2;
Image img;
Thread hint1Thread;
public void init(){
start();
}// end of method init
public void moveCar(Graphics g){
g.setColor(Color.black);
g.fillRect(xPos,50,20,30);
}// end of method moveCar
public void update(Graphics g){
//Captures the graphics image area of 200x200 pixels
img = createImage(200,200);
Graphics gx = img.getGraphics();
moveCar(gx);
//Draws the image
g.drawImage(img,0,0,null);
}// end of method update
public void run(){
while(true){
xPos+=2;
if(xPos>198)xPos=2;
try{
Thread.sleep(50);
}catch(InterruptedException e){}
repaint();
}// end of method run
public void start(){
hint1Thread = new Thread(this);
hint1Thread.start();
}// end of method start
public void stop(){
hint1Thread.stop();
}// end of method stop
}// end of class Hint1[html]
<HTML>
HEAD>
<TITLE>Hint1 </TITLE>
</HEAD>
<BODY>
<applet code="Hint1.class" width=200 height=200>
</applet>
</BODY>
</HTML>
[html]

I believ this occured 2 years ago in playoffs. Maybe more. Forget, but the Leafs eliminated Flyers from POffs that year. The Flyers I also don't remember (the one knocked unconscious) but the one that was chasing him around was ... damn ... believe the last name began with an M, he is on the Rangers now... McArthy, thats right! Sandy Mcarthy.
As for Tucker. You are right. Every team needs a guy like him. Flyers have always had 1 or 2. Holding stick, flopping, and stuff. I really don't mind that, everybody does it... I even like Tucker from that point of view (though I hate watching my team fall victem to him :P).
If Quinn hates that style of play, why do the Leafs always rank in top 5 of penalties (the top this year) and among the top in fighting as well? If he wanted it stoppped it would stop. In fact he pushes for it, which you can see by the line match-ups he forces on ice. Also, he does complain a lot, but this is also a tactic. He complains to refs so they watch the other team more closely and will call penalties more on the other team. He does it well. (He is not the only one, Bowman used to do it, and Liniux (sp? does it for the Penquins...).

Deinterlacing/upscaling 480i method for detail upscaling

Similar Messages

Maybe you are looking for