Delay after reboot: any improvements with the new BT Keyboard and mouse?
Hello all!
I currently have the "old" BT Apple Keyboard connected to a one year old iMac. And of cause it suffers the delay after a reboot or awake of sleep mode. Sometimes it just takes forever till BT Mouse and Keyboard is recognized by the iMac.
Now as I am close to purchase a new iMac, I was wondering whether this mess is somehow fixed.
So, all who already have a new aluminium iMac and a Bluetooth keyboard - is it worth spending the money or will I still find myself in front of the MAC OS X clicking and typing and being full of hope that I finally can start working?
Thx for your experience on that!
Message was edited by: Thomas Halenbeck
Message was edited by: Thomas Halenbeck
IOGear, Trendware and Startech.
I'd stick with IOGear.
Similar Messages
-
Using a PowerPc G5 and Mac Mini with the same display, keyboard and mouse
I have a G5 PowerPC and a new Mac Mini. I wanted a good KVM switch so that I can use the same display, keyboard and mouse with both machines. Any suggestions?
IOGear, Trendware and Startech.
I'd stick with IOGear. -
HT4623 My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?
My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?
have you ever tried itunes on your friends pc or someone if you have trusted that pc in your iphone then you can
-
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue
*Typing lag iOS 7*
Settings>General>Reset>Reset all settings. This should improve the typing responsiveness
*Note:* Settings, preferences, network settings, etc will be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF) -
I updated my iPhone with the new update..and then it turned off...instead of turning back on it tells me to plug it into iTunes..and when I do iTunes tells me that my phone is in recovery mode and needs to be restored..is there anything I can do without restoring it?
Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.
-
when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do
Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
Please help. I can't use my iPhone 4G with it's updated new iOS7. I can't remember my passcode and it stays at "iPhone is disabled". Have I lost the use of my iPhone forever? It's an iPhone not iPad.
Message was edited by: diana135HT4061 Help! I've updated my iPhone 4G with the new iOS7 update and entered the passcode in it and now my iphone is diabled because I can't remember the passcode and the screen keeps showing "iPhone is disabled". Have I lost ever having no access to my iPhone?
-
i changed my apple id and password but how can i update my iphone with the new apple id and password?i changed my apple id and password but how can i update my iphone with the new apple id and password?
You have to delete the old account, provide the password for the ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos that are not in your camera roll, save them to your camera roll before deleting the account (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward facing arrow, then tap Save to Camera Roll). -
I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa -
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Any issue with the new 4.4.4 (23.0.1.A.4.30),?? ultra stamina even not work.
Hello here.
After the last update that appear yesterday (23.0.1.A.4.30) Android 4.4.4.
All is ok, cover now work, but ultra stamina mode , the same. My tablet is wifi, why this option appear in my config?.
....just click and ...error.
By now, all ok only ultra stamina mode.Thanks for the reply.
I understand.
The case is, that maybe appear the same but in another way with the new Lollipop, and after Lollipop no more updates i think is secure. But well.... thanks
P.D: this site forum ban per I.P post?, always when i write here, next time that i want to write again, i need to enter in this forum with another internet... with my I.P is impossible..............
a greeting. -
Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
ThxIt should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point.
Maybe you are looking for
-
Hi, I want to know list of purchase orders which have open advances. plz suggest me the report or transaction name where i will get this details of vendor/ purchase order and balance advance amount.
-
Aspect ratio wrong when importing from QuickTime Pro
Movies shot with Cannon still camera came out sideways. I used QuickTime Pro used to rotate them. They then look fine. However, when I import them into iMovie HD6, they remain vertical but are flattened down. I am sure it's a settings thing but this
-
Percentage Values are not displayed correctly when Calculated Item feature
I have developed an OBIEE answer with multiple pivot tables. Each of the Pivot Tables contains a mix of $ Amount and Percenatge columns. I have to display the totals as the last row of each Pivot Table. For reasons I am yet to figure out, some of the
-
How to display graphics dynamically in JSP
I use JSP to call a servlet to get the output . The output is in svg format. I do not hope to create a svg file to store the output from servlet. I wope to embed the svg dynamically in the jsp page Anybody knows the solution. Many thanks in advance C
-
Add New User to Site as new entry in List
Hi, I want to provide access to my site to new users as soon as i entered his/her name in the sharepoint list. Access should be specific to that list only. This can be done in Sharepoint 2013 ?