Delay BUB1 mass updates. Is this possible?

We enter mass BP updates using transaction BUB1. However, these updates are performed in real-time. This means that our BADI which triggers on a BP save is fired and the remote client system is updated, causing a clogging of the communications channels. I was wondering whether there's any way (ideally via config) of delaying the updates to the evening, or something like that ?.
Anyone...
Gary King

Hi Gary,
You can create a BDC in frontend where in you would enter the real time data and would create your required updates. Thereafter you can schedule the program as per your requirment.
When you run BDC in frontend, you can enter data on screen as requried and it gets recorded as a program code. Thus, afterwards you jst need to schedule the program to run as per your scheduling.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

ITunes7 & 5th gen iPod updating - is this possible solution? (winXP)

Downloaded iTunes 7 and you've gone through the 5 R's until your red in the face?
* This probable solution 'stumbled upon' using a 60GB video. I have no idea if the process will work the same for nano. But if your desperate and have backed up your library... full steam ahead.
If you've noticed that your iPod does not show up in My Computer, but shows up in iTunes, and the new Update or Restore option within iTunes (Summary tab of a recognized iPod) doesn't work (choosing 'Update' gives you error 1417 and 'Restore' gives you error 1418 - whatever they mean) then give this a try:
1. Restart your computer - just to make sure we're all on the same page
2. Start up/Load iTunes
3. Connect your iPod to your computer - it may take a little time for iTunes to connect to your device
4. When the dialogue box pops up telling you that a new version of firmware (ver. 1.2) is available choose: INSTALL
5. As iTunes shows you a progressive bar of 'installing' (the bar scrolls across again and again) use the "Safely Remove Hardware" option in your taskbar and stop "Apple iPod USB Device". The computer will then tell you that the device can now be removed
6. "Installing" continues... plug in/connect iPod again. The "Install" continues like nothing's happened. Weird, huh?
7. Apple logo and Update status bar should now appear on your dimmed iPod screen (because of no backlight)
8. At this point, dialogue box pops up on computer to tell you that updating continues
9. "Do Not Disconnect" symbol will then show on your iPod
10. Process finishes after a time, and now the Summary tab says the iPod has been updated.
HA!!! If this is all that troubles you - HUZZAH! And I hope this helped.
Now that we've come this far... I've found that when I normally open iTunes and plug in my iPod to aunto-sync, I now get ERROR (-50) -> Mac needs to get a database online or something to tell me what these 'errors' mean so I don't freak out when I get one...
1. Go BACK to the Summary tab or your recognized deive in iTunes. Now choose RESTORE. Make sure whatever is on your iPod can be replaced
2. This part takes time
3. Computer will pop with dialogue box saying that iPod is restored and being changed to factory settings
4. Prompt then pops up for you to name your little iPod. At this stage you can choose to 'Auto-sync songs and vids when connected' or 'Auto-sync photos' and from which directory. It's up to you.
5. iTunes will then thank you for registering your iPod. From this point, the files are copied to your device. Depending on how large your library is affects how long this process takes.
I hope this was helpful to you.
Self-Built PC Windows XP

Didn't work for me, I tried two times.
Seems like the only way for itunes to recognize my ipod is to uninstall itunes, reboot, install itunes and voilà... but no matter what I do next with the ipod (try to upgrade it or not), next time itunes won't recognize the ipod.
I even went back to itunes 6, but no matter how clean the reinstallation was done, it always complained with: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
Apple please fix this!!! Update iTunes 7.0 ASAP!

Deleting work items in PTARQ in mass. Is this possible ?

Hi
I have a number of leave request work items that I need to remove/delete from Manager Inboxes in the portal.
I have identified the work item #'s and am aware that I can remove these via SWWL in mass which is fine. In order to remove the reference to these leave requests from the UWL worklist in the portal also means that I need to remove these workflow instance #s/work items from PTARQ. However the issue I have is that the delete program RPTARQDBDEL does not allow me to enter in multiple work item numbers or even workflow instance #'s (which PTARQ seems to use).
My question is how can I go about deleting these items from PTARQ in mass ?
Might someone be able to help ?
Thanks
Nicola

Hi,
When the approver clicks the leave request approval item in UWL, it opens the leave request approval application. This application lists all leave requests with status SENT. So, if you delete the work item (with SWWL), yes - the work item disappears from UWL. Now if the manager opens some other work item, again the approval application lists all leave request. And since you did not delete the leave request from the database with PTARQ, it will be of course still included in the list.
>PTARQ will remove any remaining details in the UWL
>manager would see the skeleton information in the UWL list.
So, these are not really correct. PTARQ does not delete anything from UWL. PTARQ deletes the leave request itself, and thus it will not be anymore in the approval application list of requests.
So if you want to get rid of the whole "leave request package", you need to execute both PTARQ (to delete the leave request) and SWWL (to remove the item from UWL).
Regards,
Karri

Mass update vacany infotype 1007

is there any standard program for position
which looks for A 008 rel in hrp1001 and update hrp1007.
Thanks

Hi,
easiest way out would be to create a LSMW for mass update of this infotype.
Wilfred.
PS: Use transaction PP02 while recording the LSMW

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

I have a Macbook Pro with OS 10.6.8 with no updates. Bundled is iPhoto 11, version 9.2.6. I would like to update my OS to 10.9.5 or later. Is this possible and which version is recommended?

I have a MacBookPro with OS 10.6.8. It has no updates. This version contains Iphoto 11, version 9.2.3. I would like to upgrade my operating system to 10.9.5 or later. Is this possible and how best to proceed? How will this affect iPhoto?
Thanks, Jeff

If you have a mid/late 2007 MBP you can install the latest OSX that is available, on your MBP. Mavericks (10.9) has been replaced by Yosemite (10.10) and is no longer available in the App store.
You choices are Lion (10.7), Mt.Lion (01.8) (both $20) or Yosemite (free). The first two are available from the Apple online web site. Yosemite can be downloaded from the App store.
Ciao.

HT1338 II need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible? need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible?

II need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible?

MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

HT1338 I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

Thanks for your response. I was told, obviously misinformed, that you needed to dl Lion prior to Mountain Lion, so thanks for clarifying that. I cannot dl from the internet as it is too slow and I have limited GB per month. I know, at one point, you could purchase a jumpdrive with Lion for those of us who have this problem or no internet access. I will check into that via Apple or try to borrow internet service from a friend and move my computer there.
Thanks again.

Hi, I have got three ipad minis which I would like to use in a business environment whereby the users can see and update a single calender. Is this possible? Would they have to be run form one account?

Hi, I have got three ipad minis which I would like to use in a business environment whereby the users can see and update a single calender. Is this possible? Would they have to be run form one account?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

So is this Possible to update already existed Receiver Flat/XML File ?

HI ,
On Receiver File (FTP) Side ,So is this Possible to update already existed FLAT/XML File with some values using Receiver File Adapter??
Like I have 3 Columns in a Flat File/XML File :-
Name, Deptid, Expenses.
NameA, 8000,   -
Currently Blank -
NameB, 1000, -
Currently Blank----
Now I want to Update Existing Flat file from Receiver File Adapter
After Execution of scenario, Fileon FTP server would be Updated like this
Name, Deptid, Expenses.
NameA, 8000,   18000
NameB, 1000,   25000
So is this Possible to update already existed FLAT/XML File with some values using Receiver File Adapter?

I am dealing with similar type of scenario..
If that way it is not possible , So please guide me what other workarounds can be done ..........???
Does FTP Sender Support Synch Call... ???
regards

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

Not easily, unless you backed up your data.
Did you? If not, let that be a lesson to never install anything without a backup:
https://discussions.apple.com/docs/DOC-1992
https://discussions.apple.com/docs/DOC-1948

I just lost all recent updates to my iCal from the last days. Can this possibly happen ??? What can I do to restore iCal with the most recent updates?

Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
How can I prevent this from happening again?
What can I do to restore iCal with the most recent updates?

Random glitch. It doesn't matter; if you didn't backup the data, then you can't recover the data.
In the future, for any 'important' data, back up that data regularly. Forward the 'important' text messages to your email. Trasnfer your photos & videos to your computer, etcetera.

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

I have a ibook running on 10.3 and I want to update it to 10.4 or above,is this possible ?

I Have an ibook running on 10.3 and I want to update it to 10.4 or above ,is this possible ?

Firstly, can you run it?
Minimum System Requirements for OS X 10.4 Tiger:
A PowerPC G3, G4, or G5 processor
Built-in FireWire
At least 256 MB of RAM
DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools
More information here:
http://docs.info.apple.com/article.html?artnum=301341
Secondly, you may find it difficult to get. Look on eBay or Amazon for a black retail install disk. Don't be surprised at the price.
Thirdly, your iBook is a decade or more out of date and officially obsolete. Is it not time to quietly retire it and get something more modern?

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Delay BUB1 mass updates. Is this possible?

Similar Messages

Maybe you are looking for