Delay Designer problem issue troubleshoot ... It shouldn't be doing this.

I have about 8 delays on varying levels (decreasing on each point on the Delay Designer timeline).
When I Render to Action, there is an exact repeart/echo of what is being said, very loudly, very annoying.
When I delete Render to Action, my effect has been altered and the last point has moved levels, back up to 0 dbs when it was originally at -50.
I've deleted and altered the Effect, re-rendered, and it still does the same thing, even when I delete that point, it just changes the next one.
I'm also using Pitch Shifter II and Exciter Effects in that order before Delay Designer.
On Delay Designer, I have changed the Pan, Trans (pitch), and the rest of the mods on all points.
Any thoughts?
I have yet to find an answer for this.
10 points to the house for whichever guru finds an answer! Woot!
(My guess, the problem is Snow Leopard.)

this really deserves a response

Similar Messages

I am trying to download In Design and it stops at 42%. It does this on all other applications too

I am trying to download In Design and it stops at 42%. It does this on all other applications too

Restart your computer. Use a different browser.
Also, look at this Adobe document to see if it helps:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

Same wifi problem over and over again. Why does this happen?

Ok, so i have had this problem for a while. My WIFI network works really good, and its only on my IPAD 3 that have problems. My signal is great, and this has happened before. Suddenly i have no connection. But the signal is good and i dont get why there is a problem, when there is no problem with other ipad and iphones in the house. And i have done all there is to do.
"safari could not open the page because the server has stopped responding"
This pops up when i try the facebook app.
"can not connect to facebook , check internet connection and try again ."
iPad (3rd gen) Wi-Fi, iOS 6.1.3
Now
People in here has helped me by saying this:
Just unplug the cables from router(power and internet) and put back just after 15 sec no matter if show the colour on router lights mean its on,its happen to me when has colour/lights is on but no signal is detected so i just unplug and put back and work back to normal,dont concentrate the colour/light always,just see ur icon signal(wifi) on menu is on.
Em... So well, now, this problem happen really often, and it buggs me!
Why does this problem pop up minimun once in 2 weeks?
And its still just me that has this problem.
Its only my ipad 3 that have this problem, iphone4s and ipad2 is connected
I WOULD BE SOOO HAPPY TO KNOW WHY THIS HAPPENES! Im sick of it.
Thanks:)

Try force closing the Music app: double-tap the home button, locate Music in the list at the bottom, tap and hold it until it wiggles, tap to close it, tap the home button. See if that fixes things. If not, try turning off iTunes Match on your phone and then back on, allowing your music list to reload.

Flash problem persists after 6 months...does this new information help?

Hi All!
I posted my problem almost 6 months ago, (I'll paste some of the info below to bring you up to date), but I STILL can't access only FOUR sites because I get a "Plugin file is missing" error, (after my previous post I found 2 other sites). I've been trying to solve this problem off & on, but I got more dedicated the other day because I'll be needing access to these sites very soon. I found some new information today that I hope will solve this awful problem; however, since I'm not very technically inclined I know I have to ask a "Flash Expert", so here goes....
I run Windows 8 & I use Mozilla exclusively. I updated Flash the other day to version 15.0.0.152 & I wanted to make sure the plugins had been updated, so I opened the "Flash Player Settings Manager" & under the "Advanced" tab it lists:
                                        NPAPI Plugin Version 15.0.0.152
                                        PPAPI Plugin Version Not installed
Is it significant that the PPAPI Plugin is "Not installed", or does Mozilla only require the NPAPI plugin?
My second question regards the installation of Flash. I know that when a program is problematic, it sometimes helps to uninstall & reinstall it...I recently had a game that went nuts & that's the procedure I had to do. Also, someone on Mozilla's forum said they were having a Flash issue & they went to your site & downloaded the .exe AND the .msi Installers from the Distribution Page, then manually installed them & their problem was resolved. Would this help me resolve MY Flash problem? If you think it's worth a try, do I have to uninstall Flash first?
Well, that's all the new info I have. I have to figure this out before December because that's when the nest-cam comes back on...I really have to get this problem fixed! I'll paste my previous post below, but I hope the uninstall/reinstall method will be the answer!
Thanks in advance for your help!
Best Regards,
DogPal
Here's my previous post:
Flash 13.0.0.214 does NOT work on some sites, but works fine on all others in Using Flash Player
Hi!
I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
My attempts to resolve the problem were:
1. Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
2. Went to You Tube, Facebook & other similar sites and I can view streaming media.
3. Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
4. Completely shut-down my laptop & rebooted.
5. Did "System Restore" to earlier in the day when ALL web-cam sites were working.
6. Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
7. Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
8. Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
     same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen. Even
     though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
     thought I should mention it).
9. I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
     for 2 sites.
I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
As for the 2 sites I can't view, they are:
                                    http://www.pixcontroller.com/eagles/    And
                                    http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha). I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
I hope you have a solution for me, as I'm desperate! I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer. If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
Thanks in advance for your help!
Best Regards,
DogPal
P.S. I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles    I'm sure this means something, but since I don't understand this technical stuff I don't know what that is! (I told you I'm clueless!)

I definitely see a problem with the pixcontroller/eagles site on Windows 8.1. It works fine for me in the same version of Firefox on Windows 7. It's unclear to me whether it's a Firefox or a Flash Player issue, but I'm happy to look into it further and get some bugs filed.
As a temporary workaround, both sites work fine with Google Chrome and Internet Explorer.

Delay Designer manual?

I can't seem to find any information for using the new Delay Designer under Apple Help (Soundtrack Pro 2).
Does anyone know if I'm missing something?
Thanks
2GHz dual G5 (rev2) Mac OS X (10.4.10)

Thanks for the info link Chris.
However, I'm still in search of a real manual from Apple so I can learn how to use it instead of playing and stumbling around with the interface.
Not sure why Apple hasn't posted an updated STP user manual yet...maybe when they're done with all this iPhone junk they can get back to work.
2GHz dual G5 (rev2)

Design problem: RS232 communication

Hi,
I have a design problem for communication with a device via RS232. Since I'm normally a C++ programmer I might just look at the problem from a wrong angle and hope for some hints how to do it in LabVIEW.
The scenario:
A device is communicating with the PC via RS232. The device permanently sends data packets. At the same time, commands can be sent to the device and it returns replies. Data packets and reply packets are arbitrarily mixed, i.e. after sending a command there could be a couple of date packets before the reply comes back but the packets can be distinguished by an identifier.
At least one, ideally several VIs should communicate with the device. Commands should be sent by pressing buttons and the incoming data should be parsed (the packets contain mutliple data streams) and shown on graphs or saved to files.
My initial idea:
Coming from C++ I wanted to build a class for the communication that permanently reads the incoming data and splits it to reply and data packets. This class would then have a function to send out a command and would return the reply or a timeout and it would be possible to register and unregister listeners (I wanted to use queues for this) for the various data streams.
The problems I ran into:
There were a couple but the two most pressing problems were: how could I communicate with the constantly running sample VI (e.g. to stop sampling) and how could I propagate changes to the class to it (e.g. new listeners). Since it is not returning I don't see a good way to implement it as in instance funcion (i.e. pass it the object). I could probably not let the sample function run continously but call it periodically from outside. However I planned to implement the class as a singleton, so it could be used parallely from different VIs.
Is there a best practice for a case like this?
I'm glad about any hints or ideas.
Thanks,
Tobias

tfritz wrote:
Hi,
thanks. Since almost the same thing was suggested to me in a German forum I guess this is really common practice (using one VI with different methods controlled by a queue). It still seems a little "unnatural" for me but my biggest concern (bad interface description) was shattered by the suggestion in the link you sent me to wrap these functions with wrapper VIs, thus caller VIs won't have to deal with the call-by-queue-mechanism. This might also be easier to port to a different implementation later. However I still see the danger that the continously running VI could easily become bloated.
It also requires me to change the way I have looked at VIs until now. In our course they told us that VIs are basically functions. Using this design patterns, the VI becomes more of a module, really (Like a C module implemented in a C-Source file). But I will try it. It sounds as if it could work.
I will still look into the OOP solutions a little more, though. Do I understand you correctly that you wouldn't recommend using LVOOP because it's still buggy? What about dqGOOP for example? This sounds like it could do what I need (however it doesn't seem to implement things like polymorphism, late binding and inheritance so I don't quite see what's so OOP about it. It seems more like programming with structures in C.)
I don't know if LVOOP is buggy or not. I think early on it was buggy and things have improved in recent versions. I have read that it doesn't have all the features that you would have in OOP like C. I wouldn't recommend it only because I'm not familiar with it at all. I can't recommend something that I'm not comfortable with. If you go that route, plan on spending time in these forums and in LAVA to reading up on what others have done. I haven't hard of dqGOOP.
But back to your suggestion. I still have a couple of questions:
- How do you return values from the module? Would you use a queue for that as well?
- Where would the parameter queue be held (created and passed to the VI)
I would store all of these in a functional global variable. This is the VI that stores data in shift registers. Ben's action engine nugget is an advancement on that. This allows for both the calling VI and the parallel running subVI to get and set the data as needed. It runs quickly so neither process should be forced to wait while the other VI is doing its thing.
- My VI has to be constantly sampling and this shouldn't be interrupted too long by other functions as adding a listener. However both functionalities have to access the same kind of data. Is there an easy way to parallelize this? Would the sampling be a case in the case diagram that's always used if no command was sent to the VI or would it somehow run parallely? Yes. There are a couple of ways of doing this. One would be for the dequeue to have a timeout function. In the event the dequeue times out, you run the code that is doing the acquisition. I think a better method is that the code that does the acquisition enqueues its own command again to the end of the queue. Let's say that is command A. So when case A finishes, it enqueues A, which seeds itself to run again. So if nothing else comes into the queue, it just executes A , A, A, A. But let's say another section of code needs to do something such as command B. It will slip B into the queue while A is executing. So you would A, B, then A again, because A would get slipped back into the queue when the first A finishes, but B has already been put in while the first A was running.
- Would it be possible to make the VI reentrant and in this way use it simultaneously on different COM ports (using different parameter queues as well)? I'm not sure if I will need this but it would be neat if it could work.
I think you could do this. It may be a case where the VI is saved as a template (.vit) and you initiate it multiple times. I haven't needed to do this before, so I'm afraid I can't provide any details or useful tips.
Well, I will fool around some more. Thanks so much for your help. This is kind of exciting since the concepts are quite new for me. Btw, is there something like an academic theory (computer science) for LabVIEW? I came across functional languages in university but data flow languages are still a new concept for me.
Tobias
tfritz wrote:
Another question about the "dynamically starting" of the VI:
How is the path handled? Is it guaranteed that it always takes the VI from the project or does it just search for the first VI by that name it finds in the file structure? Does this still work when building an .exe from the project? What happens if the VI is already running? Can you test for this?
While I'm at it: is there a way to stop LabVIEW from searching for subVIs it can't find when openin a VI? This resulted in very unexpected behaviour sometimes where it would find the VI somewhere else (with the same name but maybe an older version).
In my case, I just had the path hardcoded. It is my only instance, I'm not planning on moving the VI's. If you don't have the path, it will take a VI by that name if it's in memory. If it isn't in memory, it starts searching relative to the calling VI's path. One thing I know, if you are dealing with relative paths, a subVI has a different relative path in an .exe as opposed to the development environment. The name of the .exe becomes a folder. So in development, if your sub VI is mySubVI.vi. In an executable, its path is MyExe.exe\MySubVI.vi
For all of this, I recommend searching the forums to get more details.
If it is searching for a VI, you can hit ignore. But of course you'd have to do it before it finds it. When you are dealing with versioning issues, I recommend making a backup copy of the entire directory structure elsewhere. Some location where it shouldn't stumble across it.

Recording using Delay Designer

I am new to logic, so please forgive me if this is obvious. I am using Delay Designer to play with tape looping, using one if the simple infinite repeat presets. When I record i only get the exact notes that I am playing, not the delay sounds. I tried bouncing the track to audio but that didn't help, the same exact notes were recorded. On the same track i am using Space Designer and all of that information seems to be captured in the recording. Is there any way to do what I am trying to do? Or is Delay Deisgner only provided for performance in MainStage?

Sorry it has taken me so long to get back to this. You English is not at all the problem! I finally was able to make this work. It took me quite a while to realize that the volume knob next to the bus had to be up to get the aux track effects. Thanks alot, this is great to know and it got me going with using a bus.
But I still have the original question. Now I have three instrument tracks and I have recorded a set of staggered bits on each one. When I hit play I hear the delay and reverb effects just like I want. What I am still not getting is how to I record what that sounds like if I let it play for a full minute? Do I have to do some kind of routing to an audio track and record that for a full minute or something? I am not seeing how to do this.

Paviliion tx 1000 Overheating Destroys Motherboard - Design Problem

I bought my son a Pavilion tx 1000 for college. The warranty recently expired, and now the motherboard needs to be replaced because of overheating. Two different computer diagnosticians have told me that this is a design problem caused by HP's use of environmentally-friendly soldering in laptops with processors that generate too much heat for the solder. HP has already recalled another model for this reason but has refused to address the same design issues with the tx 1000. We have been told to either replace the board for $400+ or buy a new computer. We are looking for avenues to push HP into solving the problem on the tx1000 the same way they have on other designs...with a recall. Any ideas?
My son needs a laptop ASAP, but if we have to buy a new one it won't be an HP. I am also the CEO of a new start-up company that will need 300+ computers over the next year. If this problem is not fixed to my satisfaction, we will not have a single HP in the new company and will recommend avoiding HP to all our customers and vendors.

I believe I am starting to have the same problem. My laptop just ran out of warranty and though I cannot prove it, I believe it is overheating. Both my daughter and I have a TX 1000 and we both noticed when we got them that the bottoms were way too hot to set in your lap (funny for a laptop). The heat has always poured out of this thing.
I keep this laptop in the bedroom for cruising the web and usually only use it at night. Regardless as of March 12, it began shutting itself down. At first I thought it was a Windows update, but after doing all the appropriate removal, the problem is still there. I can even feel the heat on the palm rest now. And this is a well taken care of laptop, never been on trip, never moved around, banged, or mistreated. Used mostly to cruise the web, write a few documents and balance my check book. Sucks, huh?

Design problem with Swing

Hi all. I've run into some design problems when trying to create a Swing app.
I've got a non-graphical class that emulates a power supply unit. Let's call it PSUnit. I have to create a GUI for PSUnit.
Every class designed to build a full GUI app uses PSUnit in some way (changes its voltage, displays voltage, turns it on, turns it off, etc.)
Here's the catch. Suppose I've got a class:
public class BuildingBlock extends JPanel {
     // code includes a JTextBox displaying
     // the current PSUnit voltage.
}another class is created for setting the voltage:
public class AnotherBlock extends JPanel {
     // this class contains a JSpinner and
     // a button that retrieves the JSpinner value
     // and sets it as the current voltage of
     // PSUnit
}When the button in AnotherBlock is clicked, I must notify the BuildingBlock class that a PSUnit has changed its state so it can update it's values and display the correct data.
I've tried to do this a few times but failed miserably, so I'm hoping you guys could help me out.
Please note that both of the above classes have some additional code and it's not very pleasant to make one class an inner class of another. I should be able to create a "standalone" classes which, combined together, form a GUI for PSUnit.
Thanks.

Yes this is a common problem that many of us have when building UIs
Here's the question: In this instance, are these two classes really independant? Could they stand alone? Often when building a GUI, it's not even that easy to answer that question, but these leads to the two ways you can solve this
#1. Make them independent, and use listeners either using Observable / Observer or creating your own custom listeners. The advantage of this is smaller classes and more independence. The disadvantage is it's generally more complicated, especially at the design stage
#2 (what I'd probably recommend). Make 1 GUI class "MyPSFrame", then declare your panel classes as inner classes within that class. This way, everything goes into one spot, and everything is shareable. This also makes sense if you can't have 1 of the panels without the other.

Design Problem in Java

Problem definition:
Consider the following !!
You are writing the s/w for an interface to an appliance and the interface has the following things on it !!
1) three buttons - reset clear and power on/off !!
2) LCD display which shows error messages thrown by the appliance
3) a up down scroll button which helps us scroll through the messages
4) lights - white light for power on/off and red for error on the machine
and green for machine working fine !
Now i need to design all the classes that are required to solve this problem and i need to answer questions like if i am using Multiple inheritance why am i doing so or if i am using composition then why is that !!!
My idea is as follows is put below .. i need to modify this idea and make it better .. please suggest a better mechanism to make it more generic and to support more code reuse ability !
My Solution:
I have found the following relationships !
1) power on button and the power LED are related
2) the messages on the LCD and reset and clear buttons are related !!!
3) messages and scroll buttons are related
now lets decide what all classes are required and the relationships between the various classes !!
we cannot use inheritance .. i don't see any way of doing that .. so we have to use composition !!
1) we will use the concept of inner and outer classes !!
2) let the outer class be a class called myInterface which will have a method called lcdDisplay()
3) and let there be an inner class called button, i am making button a class because button is the most imp. object because all methods depends on the status of the button.
4) so myInterface has a button (composition relationship) !
My rough code would look like this .......
class myinterface
          // An LCD string is defined which is buffer which holds error messages
          // Various LIGHT variables (defined as boolean) are created and their values are initialized to be OFF
     lcdDisplayAll()
          print all errors on the lcd
          CHECK IF ERROR IS FATAL if yes make RED LED status TRUE and AMBER FALSE.
          else
          CHECK IF ERROR IS FATAL if no make RED LED status FALSE and AMBER TRUE.
     class mybuttons
getButtonStatus();
     if (getButtonStatus == 1)
POWER is ON so do all the functions
     if (getButtonStatus != 1)
POWER is OFF so dont do any functions
     myScrollUp()
decrement message index.
     lcdDisplayAll();
     myScrollDown()
increment message index.
     lcdDisplay();
please suggest changes !

srijan_capsilon wrote:
please suggest changes !No, I am not going to suggest changes: that would mean doing your work. If you have a specific Java related question, feel free to post it here. But it looks like you hardly know any Java, in which case I recommend you do some tutorials:
[http://java.sun.com/docs/books/tutorial/]
Good luck.

Design problem about repreatable entity relationships

Hi all!
As I design the data model (let's name it the ERD, no matter the name is quite unfashonable), I have found almost identical structures of entities and relationships between them, but playing completely different roles in the semantics of the model.
It obviously makes no sense to implement all such entities separately as the Entity EJB as they are to share most of the fields and methods, but I found no "handsome" solution when trying to implement them as sets of classes and interfaces forming "the abstract EJBs", and then by putting the conrete classes and complementary interfaces at the final packages to create "concrete EJBs". The problem was about types returned by the createXXX and findXXX methods, because they had to return the "abstract" EJBs but the EJB programming contract forces them to return the "concrete" ones, that are unknown to me when defining the "abstract ones". So it cancels the sense for creating them this way. It was also unclear how to operate the relationships in such model.
The idea was:
1. I define BaseSthLocalHome extends EJBLocalHome
2. I define BaseSthLocal extends EJBLocalObject
3. I define BaseSthBean implements EntityBean
... this way I have the "abstract bean", and then I can create many:
SthOneLocalHome extends BaseSthLocalHome,
SthOneLocal extends BaseSthLocal,
SthOneBean extends BaseSthBean ... to have the first "concrete" EJB,
SthTwoLocalHome extends BaseSthLocalHome... and so on to create the second, third and all the next "concrete" EJBs.
Anyway, it did not work fine as I defined createXXX and findXXX methods at the BaseSthLocalHome interface - it made sense, because those methods did not depend on the other entities.
Has anyone some idea of how to solve the design problem? Currently we are at very beginning of the project, so we have some "case study" time, and I would appreciate any solution: redesign of the data model, extraction of new EJB modules or any use of the objective inheritance.
Thanks in advance!
Marcin Gawlik

Again me - I now it is a bad idea to reply for own messages, but I have just checked a new idea:
The problem was about re-using the same components in different roles. I tried to do that by creating subclasses of the EJB classes, but it did not work. So I tried to define multiple entity EJBs that have the same class.
Considering the given example, it would look:
1. public interface BaseSthLocalHome extends EJBLocalHome
2. public interface BaseSthLocal extends EJBLocalObject
3. public abstract class BaseSthBean implements EntityBean
... then I created the deployment descriptor that deploys this pack of class and interfaces as three separate CMP Entity Beans:
1. deploy BaseSthBean as the SthOne CMP entity EJB
2. deploy BaseSthBean as the SthTwo CMP entity EJB
3. ... and so one
The question is: IS THERE ANY CONTRA FOR THIS WAY OF DEPLOYING EJBS? Is there any reason for not to use the same class and its complementary interfaces many times to create many separate enity EJBs working within the same EJB module?
Thanks in advance!
Gaw

Design problem/Exercise Book

Hi Everyone,
I am new to Labview. I just started with Labview 2011 student edition and I am following Bishop's book. But I also want a tutorial book with lots of design problems and exercises to get my skills. I am a postdoc in purdue and I started learning LabViews just because I want to learn (I am facinated by the G programming. I use it in my instrument but the departmental engineers wrote it and I want to have the same type of skills. I am also intending to become CLD). Can anyone suggest me any book or any website where I can find exercises and design problem? Thank you everyone.
Cheers!
Solved!
Go to Solution.

Ekram wrote:
Hi Everyone,
I am ...Can anyone suggest me any book or any website where I can find exercises and design problem? Thank you everyone.
Cheers!
You found it!
Get involved answering questions (gird up your loins) and let others hammer you into submision. Don't fall into the trap of writing code and posting VIs on demand, but rather post images of how you want to solve the posted question and let others feedback.
Have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Design problem with JScrollPane

First, I have problems with english. I hope u understand without problems that Im trying to say here. Sorry about that.
Mi problem is whit a JScrollPane. I want to put an image whit a predefined size for draw inside it. I dont have any information about it, just the size. I want to put it in a JPane. The best choice is use the JPane area. The problem is that I want to use a JScrollPane because the image is bigger that the visualization area.
Im unable to put a Canvas in the ScrollPane, or a JPane whit a predefined size or an image whit a predefined size. Im sure that is a design problem. Somebody can tell me something I can start whit? What do u think is better choice to put inside a JScrollPane?
I dont send any source code because I dont have anything else that is show in the example.
Gracias.

import java.awt.*;
import javax.swing.*;
import java.net.URL;
public class Test extends JFrame {
String url = "http://www.sandbox-usa.com/images/product_images/2piece_16.gif";
public Test() {
//    System.getProperties().put( "proxySet", "true" ); // uncomment if you have proxy
//    System.getProperties().put( "proxyHost", "myproxy.mydomain.com" ); // Your proxyname/IP
//    System.getProperties().put( "proxyPort", "80"); // Sometimes 8080
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = getContentPane();
    try {
      Image i = Toolkit.getDefaultToolkit().getImage(new URL(url));
      JLabel jl = new JLabel(new ImageIcon(i));
      content.add(new JScrollPane(jl), BorderLayout.CENTER);
      setSize(200, 200);
      setVisible(true);
    } catch (Exception e) { e.printStackTrace(); }
public static void main(String[] args) { new Test(); }
}

Design problem: Central MessagePool in WebDynpro App.

Hi people,
I have a design problem in my webdynpro application:
I'm designing an application with different DC's. The architecture of the application is similar to the architecture described in the document "Web Dynpro Component
Interface Defintions in Practice SAP NetWeaver 04s": One root DC which manages the differnt child DC's, which contain the application content.
Now I want to have a central MessagePool. Certain Messages in the child DCs are the same, and I don't want to have multiple MessagePool-entries for the same Message (each child DC has to define its own messages). I can't use the root DC as central MessagePool, because the Child DCs havn't access to the root-DC.
Any idea, how to define and use a central MessagePool?
Regards,
Thomas

Hi Thomas,
Instead of the architecture what you are thinking try the architecture explained in the following link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f4d79e59-0601-0010-0689-89670315bc6b">link</a>
Dont forget to award points on helping answers
Regards
sid

Can I map a drum pad to Tap Pad in Delay Designer?

Hello Everyone,
I am trying to map a drum pad (M-Audio Trigger Finger) to the Tap Pad in Delay Designer using MainStage. For some reason MainStage will not let me map a Drum Pad screen control to the Tap Pad on the plugin. The screen control inspector won't show the Map Parameter button when a drum pad is selected but it will if a button is selected. The Trigger Finger is set up to send a note when the pad is hit. I would like to be able to tap out a rhythm on the drum pad and have that rhythm be recorded by Delay Designer - like what happens when you click out a rhythm on the tap pad with a mouse. It seems like this should work but I must be missing something. Can anyone help me out with this? Many Thanks in advance.

Hi Koan22,
In my experience, Drum Pad objects can only be mapped to either MIDI notes, or items in the action menu (located in the parameter mapping browser). This looks as if you would not be able to map a Drum Pad object to this parameter in Delay Designer.
However, I believe I may have found a work-around.
Simply add a button object to your layout, assign that object to the incoming trigger pad (MIDI Note Message), then map the button to the desired parameter. ( in this case Tap Record for Delay Designer).
** One more thing to note (Delay Designer specific): Don't forget to add a button for the "Last Tap" parameter to stop the tap clock.

Delay Designer problem issue troubleshoot ... It shouldn't be doing this.

Similar Messages

Maybe you are looking for