Delay in automatic OBD creation after GRN in collective purchase order

Gurus,
1. For certain articles only, there is a delay in automatic outbound delivery creation once GRN is done for a collective purchase order. The stores raise individual POs to the DC and the DC raises a collective PO to the factory/ manufacturing unit in this case. The delay is in the creation of the OBDs to these individual stores. Please let me know what settings determine this and also maybe the name of the program that creates these deliveries.
2. Also for certain articles, when we run the t-code WF10 to create the collective purchase order, we get the "No documents found" message. Please assist.
Thanks!
Suhas

Hi,
When you say GRN is posted, I assume you've confirmed it's actually posted?
How big a delay? Is it just outputting the delivery, or is it calculating the distribution and creating it?
We found we had poor performance on Idoc processing (R/3 4.7) and this was due to merchandise distribution specific code, where by the memory wasn't being cleared during processing of large volumes of data. An OSS note exists for this issue and was relatively easy to apply. I'll try to find the number tomorrow.
On the issue you have on no documents found. Check the STO delivery creation date on shipping data, if the procurement period you have selected in WF10 doesn't include this date, it will be excluded.
We had this issues a lot with poor data setup. We now operate this in batch variant as FROM Today's date - 1 month TO today's date + 2 months.
Without more info it's difficult to advise, WF10 can be a tricky beast to use reliably.
Check out any other OSS notes, as we did apply a few to get working correctly.
Are you configured to use parallel processing in WF10? If so is server group configured correctly? Again another lesson learnt we had.
Hope some of that was of help.
Dave

Similar Messages

Automatic Invoice creation after Final Settlement (in Route Accounting)

Hello Gurus,
could you please advise how to customize automatic Invoice creation after the Final Settlement.
Now when we press final settlement in COCKPIT (or in Fast Entry) transaction we have new sales order for return (in case of return), then delivery for this order and posting GI for the delivery but we cannot achieve Invoice creation. In settlement log we can see Area: Invoices but they are missing there and system does not try create invoice.
Please advise what we missed.
Thank you in advance
Regards,
Igor

Hello,
could you please check object /DSD/TOUR if it is useful for this?
This is for TOUR STATUS..
For each activity, there will be dedicated status determined by the system??
check with your DSD functional consultant (on customization), to identify the status in which authorization needs to be blocked..
thank you
Venkatesh

Automatic Calculation of Input Tax in a Purchase Order

Hi SAP Gurus!
Good day! Please help with my problem. During my creation of a Purchase Order, I will have to indicate what Tax Code to use. In this case, I use "Input Tax 12%". On the Item Condition TAB, the calculation of the input tax is not reflected. How can I customize this, in order for us to see the breakdown of Taxes automatically?
Thank you.
Mik

Hi Mik,
If you maintain the tax codes in the system for your company code then the tax codes will be picked automatically in PO through FTXP and the same is reflected in PO.In Invoice tab you have to give tax code, then in Condition tab, the values will be calculated as per the condition values maintained for the tax code.No need to maintain any thing in pricing procedure.
If your tax procedure in TAXINN, you have to maintain the condition records for the condition types ( JMOP, JEC1, JSEP etc..), then only the values can be shown in PO in Condition tab.In TAXINN, the tax code has to be assigned to the company code.
Regards,
Gangadhar Y

Problem in Automatic pickup of message in output of Purchase Order

Dear friends,
i am facing a problem in PO at output messages, after creating the PO i am unable to go for print automatically. ie: i nead to give the output type NEU in the messages manually.
i was gone through all the possibulities and settings i have to give. can any one please tell me all the possibulities that causes this problem.
i am getting the below message regarding this
No message generated for output of purchasing document
Message no. 06261
Diagnosis
The system was not able to find a message record via the message determination schema. Therefore it was not possible for such a record to be generated for this purchasing document. In consequence, the purchasing document cannot be outputted (printed or transmitted).
Procedure
The message determination process should be checked and, if necessary, corrected.
The message record can be created manually for this document. For this purpose, choose the function "Messages" in the menu "Header" and maintain the necessary data.

hi
You need to do some configuration for this.
u2022 Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
u2022 Now the subject will be PO No. 1800004202.
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
u2022 Select the checkbox and click on Output Message.
u2022 You will get a message MAII 00000000000001 generated .
u2022 Use note no 191470
VB

Automatic Flow of Tax Code in the purchase order (Service)

Dears,
My purpose is to populate the Tax Code automatically in the Service Purchase order (Account assignment U and Item Category D). The tax code in the purchase order is required for ERS.
If i maintain the tax code in the info record for a material, then the tax code is getting automatically flown from the Info record to the purchase order.
However, if I maintain the tax code in the info record for a service, then the tax code is not getting automatically flown from the Info record to the purchase order. Is there any other settings to be maintained to populate the tax code for the service purchase order?
Thanks & Regards,
Ramesha

Hi,
The tax code in PO is at item level for stock material.
In your case you cant make it default as inforecord field is at service level(You cant make it default for every service specifications you create at item detail level)
Check the field info record in your service PO.
Regards,
Deepak.

ME22N : Fast Creation of Confirmations of a purchase order

Dear guru ,
I have many positions for a purchase order and I want to create a confirm for the same delivery date and quantity of every purchase order item .
If i have many positions is too onerous the manual creation for every positions.
Does exist a tool that create in fast mode the confirmations for all the positions of a purchase order ?
Thanks in advance

Hi,
Could you pls share with the forum also.. how you have carried out this activity.
Regards,
Suresh

Automatic Batch Creation after VA01

Hi Guys
I have an urgent requirement to create batch automatically when I save my new sales order using VA01. Please help me find a way to do so. I have not yet found any exit to do so from VA01.
Please help.
Thanks a lot

Hi
Thanks a lot for your reply. Can I create a batch with the item characteristics selected by the sales person after the creation?
Please let me know if there is a way.
Thanks a lot again for your help.
Avinash

Problem in automatic PO creation after EHP4 upgrade

Hi experts,
We upgraded our system from ECC6.0 to ehp4. When I am trying to use ME59n to create a PO automatically from a PR, I get a dump "Please maintain services or limits". Item category used is either 'B' or 'D'. The same was working fine earlier in ECC6. Could someone help me as to what could be the issue?
Regards,
Hema

Lakshman has explained
you need to have the source list setup (make sure info record exist) or contract is exist and it is assgned to the source list
but as per your email the source is determined in the PR that means source are setup properly
now check the variant of your back ground program of AutoPO
if the variant is not matching with your PR's than it will not creates the PO
so create few PR's and test it with ME59N with the background job variant and see how it is going
some time in the variant let say you have setup the release date but if it is not matching with PR release date than it will not create the PO
so in short you need to test same varinat online than setup for back ground.

Automatic TO Creation after completing GR in MIGO

Dear Experts,
I need to configure in such a way that, once a GR done against a PO in MIGO, Transfer Order should be automatically created. The next step I should do in LT12 - TO confirmation.
Please help me in setting this up.
Regards,
Shetty

Hi,
Please maiantian following customization settings
SPRO>>Logistics Execution>>Warehouse Mgmt>>Activities>>Transfers.
Select the warehosue number and movement type 101
In backround processing tab set automatic TO as 'X'.
Br,
Tushar

Automatic project creation after saving sales document

Hi All
I want to create project ( WBS structure only , not network ) when I save sales document. We are not using networks in our project. We have only WBS structyre.
Any way to achive this in standard or we have to go for development?
If I go for development then what things I have to do .Any Idea?
Thanks
shashank

This is one of the most soughted requirement for professsional Service Company. As Ahmed confirmed As of now Assembaly processing in PS with respect to network only we can achieve. So, Surely you have to go for development. But one good news for us is that SAP is working on EHP5.0 - called as Professional service pack, In this pack few new PS-SD related funcationality added so with respect to WBS Elements only you can created Proejct at save of Netwrok.
All the concept are same Requiremetn Type --> Requirement class and all but As I remember they added one more transaction CN08CI moslty, similar to CN08 where you can give WBS Element and Material combination. It's development Product so there is may be delay but Mostly It may hit market by end of May 2010 or June 2010.
As I understand this is quite genuene busienss requirement and if this product clicks in market in that case it will surely enlage socpe of PS Module.
With Regards
Nitin P.

Error: Automatic tick on FOC indicator while creating Purchase order

Hello All,
Our client is going through one issue that when they are creating PO by ME21N,after putting PR and line item and plant,it is automatically ticking on FOC indicator and then in invoice tab the field Inv.Receipt and GR based IV automatically gets disappeared, when we untick FOC field then it shows the Conditions tab. but we cant add any condition in PO item wise as we add any condition it again gets tick on FOC and price and tick on invoice receipt,GR based tick we have to do again.
I have added plant in vendor master record.
Please do needful.

you said "I have added plant in vendor master record."
So you are talking about intra-company or inter-company stock transfer?
Are the the shipping plant and the ordering plant in the same company or in different companies?
Please explain a bit more detail about your process, somewhere you must have a deviation to the standard stock transfer process. I think it is one, otherwise I would have to ask why you added the plant to the vendor.
you wrote:One thing is that we are facing this problem only for one vendor so we tried by deleting info record,but didnt work properly.
you actually tell this as if this is an external vendor, I would expect that you know the names of your sister plants.

Automatic Generation of GR at Time of Purchase Order

Hi experts,
Please help me.............................
What is the " Automatic Generation GR"
and How the PO with GR is handled?
Thanks and regards,
Edited by: Hero on Jan 15, 2008 10:23 AM

Hi,
I 'm MM and I want to know how to creation PO automation GR.
I don't known SAP provides the option of having a GR generated automatically by the system at the time of PO.
Please help ................... in this case.
but I know SAP provides the option of having a PO generated automatically by the system at the time of GR and I success it.
Thank,

Creation of delivery for subcontract Purchase Order

Hi All,
I am trying to create delivery for subcontract PO. ME2O transaction creates delivery but doesn't link PO to delivery . Is there any SAP table where we can see link of subcontract PO to delivery created throug ME2O?
Business don't want to use MB1B transaction because it doesn't create delivery inturn doesn't create any paper work(Pick list or Packing list).
Is there any way to create delivery based on subcontract PO?
Thanks in advance.
Sonali.

You have to do Sub con PO setup in Img customization. You can be able to print all ur required documents during MB1B also. Presently I am doing exact the same setting for my present project. Complete Configuration required under
Img->MM->IM and PI->Output Determination.ABAP help will be required to design the layout for pick list and packing list.Let me know if you need more information.
Cheers!

Inbound delivery creation with out reference to purchase order

As per my requirement i am third party warehouse who provides space for my customers . i receive goods from lot of customers who have their own ERP system or may not be any ERP system . The goods i am going to receive is non valuated material. How do i receive GR in the above scenario.
I am thinking to create one dummy purchase order and then create inbound delivery. Otherwise How do i create inbound delivery without reference to any documents?.

Hi,
Inbound delivery
You can create purchase Order(ME21N),inbound delivery in t.code: VL31N and Goods Receipt in t.code: VL06IG and post the goods wrt PO into the GR blocked stock (movement 103) and finally you can release goods from blocked stock to unrestricted stock with 105 Movement type, if satisfy quality or other criteriau2019s.
Or
As you said, you just keeping customer stock better create material with non-valuated material type UNBW and do regular process like PO, GR & GI etc.Inbound delivery not required for above said process.
Regards,
Biju K

Getting error after submitting import standard purchase order from localization responsibility

Hi All,
I have manully inserted data in header,line,distribution interface table like below
INSERT INTO po_headers_interface
(interface_header_id,process_code,action,org_id,document_type_code,document_num,currency_code,vendor_name,vendor_id,vendor_site_code,vendor_site_id,comments,
vendor_doc_num,amount_agreed,effective_date,expiration_date,vendor_contact,approval_status,terms_id,agent_id,creation_date,created_by,last_update_date,last_updated_by)
VALUES
(po_headers_interface_s.NEXTVAL,'PENDING','ORIGINAL','7046','STANDARD','454545','INR','Madhura Enterprises','40179',NULL,'13922','XYZ',null,null,sysdate,sysdate+10,null,
'Approved',13922,25,SYSDATE,fnd_global.user_id,SYSDATE,fnd_global.user_id);
INSERT INTO po_lines_interface
(interface_line_id,interface_header_id,process_code,line_num,item_id,item_description,uom_code,unit_of_measure,quantity,unit_price,ship_to_organization_id,ship_to_location_id,
need_by_date,promised_date,last_update_date,last_updated_by,creation_date,created_by,line_type_id,vendor_product_num,note_to_vendor,shipment_num,closed_code,closed_reason,CATEGORY_id,tax_code_id)
VALUES
(po_lines_interface_s.NEXTVAL,po_headers_interface_s.CURRVAL,'PENDING',1,'208956','ESSEL CAPITAL ITEM','Ea','Each',2,100,'7087',
'22885',SYSDATE+1,SYSDATE+1,SYSDATE,fnd_global.user_id,SYSDATE,fnd_global.user_id,'1',NULL,'aaaaaa','1',NULL,NULL,'1','1000');
INSERT INTO po_distributions_interface
(interface_header_id,interface_line_id,interface_distribution_id,distribution_num,quantity_ordered,quantity_delivered,quantity_billed,quantity_cancelled,destination_type_code,deliver_to_location_id,
deliver_to_person_id,charge_account,charge_account_id,creation_date,created_by,project_id,expenditure_item_date)
VALUES
(po_headers_interface_s.CURRVAL,po_lines_interface_s.CURRVAL,po_distributions_interface_s.NEXTVAL,'1','2',NULL,NULL,NULL,
'INVENTORY','22885','24',NULL,'134793',SYSDATE,fnd_global.user_id,NULL,NULL);
When i am submitting the standard program then i am getting following error---
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_ERR_UTL. Procedure add_fatal_error.0
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_ITEM_PROCESS_PVT. Procedure update_master_item.60
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_ITEM_PROCESS_PVT. Procedure create_items.60
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_MAINPROC_PVT. Procedure process_lines_add.70
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_MAINPROC_PVT. Procedure process_lines.10
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_MAINPROC_PVT. Procedure process.10
ORA-06502: PL/SQL: numeric or value error: character string buffer too small in Package po.plsql.PO_PDOI_PVT. Procedure start_process.110
User-Defined Exception in Package po.plsql.PO_PDOI_Concurrent. Procedure POXPDOI.30
Please help me in this issue.. when i am running this on vision without tax code it is working fine.
But in localization its not working. Basically i need to do scripting for india localization for Open PO.
The application Details -
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.3

please everyone do needful help on this..

Delay in automatic OBD creation after GRN in collective purchase order

Similar Messages

Maybe you are looking for