Delay in loading web pages after airport express installation

Hello, I had my intel imac hooked up to dsl directly through ethernet (PPPoE), and I had really fast internet browsing. I then got an airport express, hooked it up to create a wireless network, and it worked, except that, while loading a new web page in firefox, it has a delay of about 13 seconds before it starts loading the page (spinning circle showing in the tab). Once the first items appear on the page, its very very quick, but it just takes 13 seconds to start. Does anyone know what this means, and how I can fix it?
Kenton

Thanx! The numbers didn't help me anything, but your post reminded me: I found the DNS numbers that my ISP had provided that I had put in the Ethernet TCP/IP section in Network Preferences, and just copied and pasted them into my airport TCP/IP section. Worked great!

Similar Messages

Serious delay in loading web pages, not network, but safari issue

After my last software update, I am experiencing delays in loading web pages, 30sec-minutes on safari. This occurs rather frequently, I'd say about 20%-30% of the times I visit certain web pages.
One example web location I noticed this happening is (but its not the only one):
http://www.theweathernetwork.com/weather/caqc0363
Once I visit this page, sometime it loads fine, other times it takes forever (the load indicator stays on in the tab). Also, once the delay occurs, opening up new widows or new tabs to ANY other address are also delayed. It seem like all of safari is stuck waiting for responses. (safari itself is still running ok, it is responsive and there is NO spinning wheel of death).
It is not a network issue. Often while waiting for safari to load, I launch firefox, visit the same page and read, meanwhile Safri still loading, even after trying to refresh...I also do other network tasks, ssh, ftp, email with no problem.

Thanx! The numbers didn't help me anything, but your post reminded me: I found the DNS numbers that my ISP had provided that I had put in the Ethernet TCP/IP section in Network Preferences, and just copied and pasted them into my airport TCP/IP section. Worked great!

Having issues with loading web pages after using migration assistant

Last week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Mega delay in loading web pages - help please

For the last week I have been experiencing very slow web page loading on both a Win 7 PC and a Mac OSX, both are connected by ethernet to the HH
It takes about 20 secs to load most sites. The browser start to load then hangs for 20 secs.
The HH was up for 3 months and reset itself two weeks ago.
Anyone got any ideas why this is happening?
Ping times are pretty bad
Pingtest.net just now shows 271ms and 19 ms jitter
Here is my HH stats
Connection Information
Line state
Connected
Connection time
14 days, 00:05:22
Downstream
6,144 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
9.1 dB / 24.0 dB
Line attenuation (Down/Up)
41.4 dB / 25.0 dB
Output power (Down/Up)
9.3 dBm / 1.7 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
35289 / 39
CRC Errors (Down/Up)
17282 / 18
HEC Errors (Down/Up)
54374 / 25
Error Seconds (Local/Remote)
12433 / 63

Now email is also affected.
All three email accounts are intermittent, especially the BT internet main email account.
Cannot contact server is the favourite error message.
As others have had similar connection problem perhaps one of the nice MODS could actually find out what is happening in the BT network?

Delay in loading web pages using wireless after 10.5.6 update.

I've read the posts for the 10.5.5 updates, but I have been recently experiencing this problem after updating to 10.5.6.
It is seemingly a DNS problem because of the delay in "Looking up" and "Waiting for" in Firefox, but I do not have DNSchanger trojan. I have done everything from entering the known DNS statically, dynamically, OpenDNS on either or both the router and laptop.
I experience no problems at all when connecting to the router directly w/ an ethernet cable. And my download speeds, whether P2P or a large file through webserver is similar to what I experienced before the 10.5.6 update.
I understand that it could be my ISP, but I was surfing fine less than a week ago. Is it merely a coincidence that I updated to 10.5.6? Any further suggestions?

Thanx! The numbers didn't help me anything, but your post reminded me: I found the DNS numbers that my ISP had provided that I had put in the Ethernet TCP/IP section in Network Preferences, and just copied and pasted them into my airport TCP/IP section. Worked great!

Firefox will lot load web pages after upgrading to version 3.6.6

After loading 3.6.6 I can no longer access the internet. Norton Internet Security 2010 has quarantined 3 Firefox files: nssdbm3.dll, freebl3.dll, softokn3.dll
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6. Firefox worked fine prior to upgrade. After upgrade, Norton told me there was a security incident and I needed to reboot. I have not been able to use Firefox since rebooting.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

Safari slow and Not Loading Web Pages after changing Modems?

Hello...I recently changed from an AT&T DSL modem to a Knology Cable Modem to improve speed and overall network capablity. However, ever since I have changed I have had problems with Safary lagging or not loading the websites. It doesn't do it all the time, but periodically. Sometimes it is worse than others.
Basic issue: When using Safari, it stalls when loading a website. Sometimes it will load, other times it will say that Safari cannot load the website. If you wait a while and retry loading it, it may then load it.
Has anyone else seen something similar to this or know what I can do to fix the problem? It is rather frustrating.
Thank you,
Jim

If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)

After updating my plugins firefox 5.0.1 still hangs/freezes when loading web pages.

After making sure my plug-ins were updated, firefox 5.0.1 hangs/freezes when loading web pages.

I changed the setting, but unfortunately, this didn't fix the problem. This situation does seem to occur more, when I load or reload my eBay home page. I noticed that all data and information would go ahead and load, but the random ads bar would not immediately load and when I would left click anywhere on the page, Firefox would temporarily freeze, the page turns white, Firefox not responding will display, and then the banner would load and everything is fine. I'm wondering if it has something to do with my Flash Player. Any additional suggestions would be greatly appreciated. Thanks! Reggie

Issues loading web pages on brand new machi after using migration assistant

ast week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

First place to look is your System Preferences/Network DNS Server Settings ...
If you haven't been provided with any by college IT then use the ones suggested here:
http://www.dnsserverlist.org/

Browsers not loading web pages.

Hi there I'm hoping someone can help me with this.
This evening I logged on to my mac to find that none of my browsers (Safari, Chrome and Firefox) could load web pages. My MacBook Pro connects to the Internet via wifi. All other devices (wired and wireless) connected to the router work and even when the mac is hard wired it works. I have a bootcamp install of windows that works fine.
I tried loading all 3 browsers on another users account to no avail as well as attempting it in a guest account. I also attempted to load pages whilst booted in safe mode again to no avail. The strange thing is, when I connect to my universities VPN the browsers all work fine.
I have also noticed that applications installed that show in the menu bar (weather, Dropbox etc) do not work unless the mac is hard wired (or connected to the VPN wirelessly).
Can anyone help with this problem please?

First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area. Another possible solution - read mammothsuziq response https://discussions.apple.com/message/22082360#22082360

Often unable to load web pages.

My MacBook har suddenly decided to not load web pages ...
I surf around, and maybe one fifth of all the web pages won't load in my browser (both Firefox and Safari). It isn't something about the web pages, because after some time I can get them to load perfectly. I contacted my ISP, and they couldn't find anything wrong. Besides, I can surf just fine from other computers (non-Macs).
I wondered if it was something about the port, since all other apps work perfectly (for example Google Notifier and Audium is always connected), but https doesn't any better. I've also pinged web sites for a long time, without any evidence of something being wrong. One strange thing is that traceroute sometimes gives me "no such host," and then a moment later, it works with the same address.
It's not Airport either, because I now use a network cable and have the same problems.

There are several possibilities that come to mind.
Since HTTP transfers often fail, but lightweight protocols such as AIM don't, my first thought is MTU (Maximum Transmission Unit).
The standard MTU for ethernet networks is 1500 bytes. This means that all transfers are broken into chunks of 1500 bytes each before being sent over the network. In some cases, certain network configurations (such as DSL links that use PPPoE) require a lower MTU such as 1492 or even 1460.
Normally this isn't a problem since the router tells the client what MTU to use but sometimes this doesn't work - especially if you're using a NAT device.
When there's a mismatch your Mac doesn't know that it needs to use a lower MTU so sends traffic upstream at 1500 bytes and the router chokes when it tries to cram that data into its 1492 link.
This is why lightweight protocols often work - the typical AIM packet is less than the MTU and therefore doesn't need to get truncated. However, large file downloads exceed the MTU and run into problems.
If this is the case you can force your MTU to be lower using the System Preferences -> Network -> <interface> -> Ethernet tab. Switch from Automatic to Manual and you'll see options for changing the MTU. Try lowering it to 1460 to see if it works. If it does you can try increasing it until you find the optimal value.
If it wasn't for your statement traceroute sometimes gives me "no such host" I'd be sure this was the problem. However, MTU doesn't usually cause DNS failures since most DNS requests are small.
If your DNS is failing and the ISP belives the DNS server is working correctly, that hints at a link-level problem. Packets are getting lost somewhere along the link between you and the server.
The first thing to check here would be speed and duplex. The fact that you've used both AirPort and wired connections hints that it's not a problem directly on your machine, but what about the rest of the links between you and the router? I'm guessing you have an ethernet cable between your base station and a switch, maybe another cable between that switch and the router? Either of these cables could have a mismatch.
Without knowing the switch it's impossible for me to tell how you check the switch port configuration - some switches have LEDs on each link that tell you the speed and duplex, others have a command line or web interface that will give you port status and statistics. If you have such a switch, check it. Also check the switch logs if you can - you'll often see error messages such as 'excessive CRC errors' which can indicate a duplex mismatch.
If you can't get the information from the switch, try manually configuring your devices. The same preferences tab where you set MTU can also be used to set speed and duplex. Just be aware that if you choose a combination that the switch doesn't support (e.g. you choose gigabit but you're connected to a 100mbps switch), then the link will go down.
Try different options to see if any of them work any better for you.

Firefox will not load web page (I also have Internet Explorer 8 installed).

Fire Fox will not load web pages. It may have something to do with proxy settings but I have reset this to Auto-Detect which is where it has always been in the past but still nothing. Something has reset my proxy settings in the past which caused a similar problem but doesn't seem to be the issue this time. I have Internet Explorer 8.0 installed on computer right now and it seems to work.

After looking into this further I checked firewall settings in Panda A.V. For Firefox they were set to Custom settings which effectively disabled it. I changed setting to Outbound only like Internet Explorer and other programs and Firefox seems to work fine now. Hope this helps others who have experienced this problem. I have teenage children who use computer a lot (Face Book, etc.) so the root of the problem may have been Malware, Adware, or something else but hopefully Panda has taken care of this.

Blue banner bar not loading web pages

I'm having or have had for some time a problem with pages fully loading on Safari 3.2.1. Even now as I write this the blue banner bar only loads to about 75% and stops. Other times is less than 50%.
I have 12.1 GB out of 40.0 GB free on my iBook. I run updates and do disk utility weekly or as needed when things get updated.
Not sure if it's something in the system that gets stuck trying to search and load RSS feeds, but it seems to start there. Especially starts up when I use Gmail. When using Gmail the banner never completes and when I sign off the banner bar just does not ever fully load. I have to close out Safari and start over.
I'm at a lose as to what is going on.
I can understand that when I'm at a hotel using a low speed Wi-Fi that things go slow or don't work the right. But, at home where I have high speed airport it doesn't make sense.
Any thoughts what I can do?

capt_smiley wrote:
Hope someone can help me on subject problem. My 5530XM suddenly cannot load web pages nor web feeds for some reason. WLAN connection is active and I'm able to browse the web using Opera but the default browser just cant open any web page.
Allow all content and enable javascript in the default browser settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Safari cannot load web pages, but still communicates with the www

I am using Safari 6.0.5 as my main web browser. Unexpectedly, a week ago it stopped loading web pages, though apparently the program somewhat still communicates with the world outside, since I can enter any text in the address bar and get responses in real time from Google.
Other programs using the internet work regularly. I have already tried the usual set of solutions proposed in the official documents.
Thanks in advance,
Valerio

16/07/13 08:32:44,048 SubmitDiagInfo[305]: Launched to submit Diagnostics and Usage
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,456 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,212 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,215 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,216 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,026 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,028 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,029 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,687 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,347 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,348 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,349 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,794 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,796 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,797 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:45:31,399 WindowServer[85]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSGetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSSetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,438 loginwindow[57]: ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
16/07/13 08:45:31,782 WindowServer[85]: Created shield window 0x5a for display 0x04280380
16/07/13 08:45:31,783 WindowServer[85]: device_generate_desktop_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,873 WindowServer[85]: device_generate_lock_screen_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,929 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:45:31,930 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:46:31,374 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,374 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,528 launchctl[319]: launchctl: Couldn't stat("/Library/LaunchAgents/com.oracle.java.Java-Updater.plist"): No such file or directory
16/07/13 08:46:31,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
16/07/13 08:46:34,000 kernel[0]: LE is supported - Disable LE meta event
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:34,000 kernel[0]: Wake reason: EHC1
16/07/13 08:46:58,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: Previous Sleep Cause: 5
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
16/07/13 08:46:58,000 kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
16/07/13 08:46:58,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
16/07/13 08:46:58,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:46:58,000 kernel[0]: en0: 802.11d country code set to 'X3'.
16/07/13 08:46:58,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: TBT W (2): 0x0100 [x]
16/07/13 08:46:58,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: HID tickle 175 ms
16/07/13 08:46:58,297 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:46:58,000 kernel[0]: NVRM: 0x702a called in D3
16/07/13 08:46:58,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2004), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5b for display 0x003f003d
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5c for display 0x003f003e
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,881 WindowServer[85]: Created shield window 0x5d for display 0x003f003f
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,923 loginwindow[57]: resume called when there was already a timer
16/07/13 08:46:59,000 kernel[0]: en0: 802.11d country code set to 'IT'.
16/07/13 08:46:59,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:59,061 configd[17]: network changed: v4(en0-:10.0.1.2) DNS- Proxy- SMB-
16/07/13 08:46:59,328 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:47:00,000 kernel[0]: MacAuthEvent en0 Auth result for: b8:c7:5d:05:67:5e MAC AUTH succeeded
16/07/13 08:47:00,000 kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
16/07/13 08:47:00,000 kernel[0]: AirPort: Link Up on en0
16/07/13 08:47:00,000 kernel[0]: en0: BSSID changed to b8:c7:5d:05:67:5e
16/07/13 08:47:00,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:47:00,000 kernel[0]: AirPort: RSN handshake complete on en0
16/07/13 08:47:00,651 configd[17]: network changed: v4(en0+:10.0.1.2) DNS+ Proxy+ SMB+
16/07/13 08:47:00,660 UserEventAgent[11]: Captive: en0: Not probing 'Ayn Rand 5 GHz' (protected network)
16/07/13 08:47:00,663 configd[17]: network changed: v4(en0!:10.0.1.2) DNS Proxy SMB
16/07/13 08:47:02,248 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:02,263 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:32,956 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,107 com.apple.backupd[330]: Backup failed with error: 19
16/07/13 08:47:33,107 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,552 com.apple.backupd[330]: Attempting to mount network destination URL: afp://***;[email protected]/Time%20Capsule%20di%20Valerio%20Fi l
16/07/13 08:47:34,000 kernel[0]: AppleSRP started.
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=339[ksadmin] clearing CS_VALID
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=343[ksadmin] clearing CS_VALID
16/07/13 08:47:42,707 com.apple.backupd[330]: Mounted network destination at mount point: /Volumes/Time Capsule di *** using URL: afp://***;[email protected]/***
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount: /Volumes/Time Capsule ***, pid 332
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80df13a008 /Volumes/Time Capsule di *** (error = 0, retval = 0)

Firefox 8.0 will not load web pages for multiple Windows XP users

We're running Windows XP 5.1 SP3 with two user accounts. After upgrading to Firefox 8.0, Firefox will no longer load web pages for the second user when the first user is logged in and running Firefox. (We typically use "Switch User" as opposed to logging out when taking turns at the computer.)

I guess that was a possibility
I gave up on version 8
I uninstalled it, googled version 7 and installed that and now it runs fine when I switch user to user
Thanks for the help I'll take it into consideration if I update again

Delay in loading web pages after airport express installation

Similar Messages

Maybe you are looking for