Delay in page loading when clicking on context URL's.

Whenever I click on a referenced URL, specifically in Outlook, it takes anywhere from 45 sec to 1 minute to load up. It goes to blank page and then pops up after a long wait. It appears to only occur to those URL's that have not previously been cached? A guess says that it is checking the website before caching it?? I've searched for a solution in every box and check mark I can think of. I must be missing a box checked or unchecked? I know I am overlooking something! Thanks for the help!

(1) Does it make any difference whether Firefox is already open or whether it needs to launch from scratch?
(2) Do you use any special startup procedures for Firefox (e.g., sandboxing software, the no-remote command line switch, etc.)?
(3) Could you check whether you have any "non-default" settings for the following preferences and test with the default settings.
(i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(ii) In the filter box, type or paste '''tabs.load''' and pause while the list is filtered
(iii) If any of these appear in bold, you can double-click to reset them to default (or right-click and choose Reset):
* browser.tabs.loadDivertedInBackground (probably most relevant)
* browser.tabs.loadInBackground
* browser.tabs.loadBookmarksInBackground (probably not relevant)
You might need to exit and restart Firefox for this to take effect.
(4) Probably won't affect this issue one way or the other, but Firefox is now up to version 17.0.1, which includes some security fixes.

Similar Messages

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

Drusso77 if you are continuing to face difficulties locating your serial number then please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. You are also welcome to contact our support team at http://adobe.ly/1aYjbSC.

Blank page produced when clicking on title of Content Area Portlet in version 3.0.8

We are getting a blank page when we click the title of the ContentArea/Folder portlet in a page. The problem is with the URL, which has _mode=6 as a parameter. When we reoved that parameter from the url content area is loaded accurately. Can you please tell us how to fix this bug. We are using 3.0.8.

Hi,
go to http://metalink.oracle.com/
click on PATCHES and search for product PORTAL release 3.0.8, platform Sun Solaris. The result is:
"ID:694095 Patch::1574770
BLANK PAGE DISPLAYED WHEN CLICKING SOME PORTLET LINKS IN MONITOR TAB PAGE".
Download the patch and follow the instructions.
Bye,
Ettore.
null

Why do certain webpages via google searches (YouTube, google images etc) not load when clicked but load upon page refresh?

I had problems with my Firefox browser being too slow so recently reset the browser (preserved my bookmarks but lost all my plugins). Now I find that when I am searching for something in google when clicking on certain links the window goes blank/white and shows a long url across the top (showing the link was pressed from a google search) and only if I refresh the page will the link load up.
Not sure why this is the case and could use some advice.
Thank you in advance.

Make your Firefox faster
*https://support.mozilla.org/en-US/kb/firefox-slow-how-make-it-faster?

ADF/JSF page loads when any command button is clicked

Hello All,
I am lost in the ADF/JSF page flow (using Jdev 10.1.3). Following are the tags (in order) in my page;
(WHEN THIS PAGE LOADS, IT GOES TO THE DATABASE TO GET VALUES (for the drop down lists that will appear on the page); THIS SHOULD HAPPEN JUST ONCE AND AT THIS POINT)
<f:view>
<afh:body>
<afh:html>
<af:form>
<af:panelpage>
<f:facet name="contextSwitcher">
<af:panelHorizontal> has a af:commandLink </af:panelHorizontal>
</f:facet>
<f:facet name="messages">
<af:messages/>
</f:facet>
<af:panelform>
<h:panelGrid columns="2" cellspacing="14">
has 2 panelgroups (one group has *2 SelectOneChoice lists (that need to be populated by fetching data from database* and the other group has 2 CommandButtons - 'Go' and 'Cancel") (GO BUTTON SETS THE SHOWPANEL() TO TRUE)
(WHEN GO BUTTON IS CLICKED, THE PAGE GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD (action="#{muBean.doWork}" )THAT IS ASSOCIATED WITH GO BUTTON ACTION SHOULD BE CALLED)
</h:panelGrid>
<h:panelGrid columns="2" cellspacing="14" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 inputText fields
</h:panelGrid>
<af:table var="someTable" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has a bunch of af:columns
</af:table>
<af:panelHorizontal rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 af:commandButtons - submit, save, add row
(WHEN submit or save or add row BUTTON IS CLICKED, THE PAGE KIND OF LOADS AND GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD THAT IS ASSOCIATED WITH submit/save/add row BUTTON ACTION SHOULD BE CALLED)
</af:panelHorizontal
</af:panelForm>
</af:panelPage>

<jsp:include page="/pages/includes/footer.jspx"/>
</af:form>
<f:verbatim>
<script type="text/javascript" src="../script/tree.js"></script>
</f:verbatim>
</afh:body>
</afh:html>
</f:view>
</jsp:root>
_*why is it that when the command buttons are clicked, the whole page is loaded? Only the methods associated with the action (action="#{newMapRequestItem.addARow}" ) should be called.*_
_*IS THERE A WAY TO AVOID THIS WITHOUT USING PARTIAL PAGE RENDERING ?*_
_*DOES MY TAG NESTING LOOK OK?*_
Edited by: user12054715 on Mar 24, 2010 12:00 PM

Can somebody please address this?
Thanks,

Firefox in Mac OS X opens home page twice when clicking 'home' button

Using Firefox 3.6.3 on Mac OS X 10.6.3
When clicking on 'Home' button in the browser, the home page loads in the current tab, but Firefox also opens a new tab and opens the home page there too.
Not disastrous, but quite irritating.
== This happened ==
Every time Firefox opened
== From 1st use

It could just be that the home page setting was accidentally changed to this. Firefox can be set to have multiple tabs open as the home page. Try resetting your home page - [[How to set the home page]].

How to get the page number when click the(Next page) Icon on Tableview

Hi all,
       I had implemented a tableview in one of the Views that I had implemented for a BSP application. I am using MVC framework.
Let us assume when we execute the BSP and a table view got 11 pages.
How I can keep track of the page number when we click the (Next page, Previous page, Bottom , Top) Icons on my tableview . Is there any attribute willstore that corresponding page number of the tableview when we click the corresponding Icon's??
I had checked both CL_HTMLB_TABLEVIEW and CL_HTMLB_EVENT_TABLEVIEW Classes and i don't find any attribute.
Any help will be appreciated.
Thanks in advance.
Thanks,
Greetson

Hi Greetson,
I was thinking to write a weblog about that.
But now I would like to have your opinion:
I coded a generic method in my main controller (but you could also insert it in the application class) that save the firstvisible row in the class me->firstvisiblerowlist (that is a table)
DATA: l_firstvisiblerowlist TYPE zmmsp_tableview_1st_visi_row.
DATA: ff TYPE ihttpnvp,
        ffs TYPE tihttpnvp.
me->request->get_form_fields( CHANGING fields = ffs ).
LOOP AT ffs INTO ff.
    IF ff-name CP 'f*visiblefirstrow'.
      READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerowlist WITH KEY name = ff-name.
      CASE sy-subrc.
        WHEN 0.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          MODIFY me->firstvisiblerowlist FROM l_firstvisiblerowlist INDEX sy-tabix.
        WHEN 4.
          IF sy-tabix = 0.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
          ELSE.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            INSERT l_firstvisiblerowlist INTO me->firstvisiblerowlist INDEX sy-tabix.
          ENDIF.
        WHEN 8.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
      ENDCASE.
    ENDIF.
ENDLOOP.
Than you have to provide a generic method to read the firstvisiblerow for each tableview
GET_FIRSTVISIBLEROW
*IM_TABLENAME
*RE_VALUE
DATA: l_firstvisiblerow TYPE zmmsp_tableview_1st_visi_row.
READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerow WITH KEY name = im_tablename.
IF sy-subrc = 0.
    re_value = l_firstvisiblerow-value.
ELSE.
    re_value = 1.
ENDIF.
And in the DO_REQUSET of each controller you could write something like:
* Paginator
DATA: l_tab1_visiblefirstrow TYPE sytabix.
l_tab1_visiblefirstrow = o_bsp_main->get_firstvisiblerow( 'f019id_tab1_visiblefirstrow'    ).
As usual pass the value to the view via:
o_page->set_attribute( name = 'tab1visiblefirstrow' value = l_tab1_visiblefirstrow ).
Did you get it?

Delay or no response when clicking on internet and mail links

For the past day or so, whenever I click on mail messages or internet links with the left side of the mouse, they're either very delayed and I have to click on them several times, or they don't open at all. My mail, in particular , isn't opening. I can open the links by clicking on the right and getting the menu and clicking "open", but this is a pain and it isn't even an option in the mail. I've looked in Preferences for ways to fix this and tried different mice, but nothing helps. Anyone know what's going on? I can open computer files just fine.

Hi tlaban,
What kind of mouse you using?
Mail
Empty the cache folder in Mail, to do so,
Quit Mail>Home folder>Library>Caches>Mail - Trash the whole folder (a new one will be regenerated).
Safari
Empty caches in Safari as the same way you did in Mail.
Safari Favicins
Trash the Favicons (these are the little icons you see when you are visiting a website)
Home folder>Library>Safari folder>Icons
After you relaunch Safari, go to the same Safari folder an select the icon file only ones. Now command-i for file info. Ad the bottom of the info window set it up "Only read" close window. To do it like this, it prevents Safari to store ALL the Favicons. Sometimes the file is growing to huge an can slow down surfing.
Post back with the results.
Dimaxum

Server timed out while loading the home page.Loads when refreshed.

Hi All
I have developed my application in .Net framework. I tried to deploy the application in PlumTree Portal server. The application gets timed out when run for the first time ( i.e, as soon as user logs in). It gets loaded when the page is refreshed. I tried inreasing the portlet timeout in web service, but of no use.
I have used "Response.Redirect" in my home page to load the screen as per the user. Could this be a problem? Or is there a problem an someother place.
Any help or suggestion is welcome
Thanks,
Karthick

Hey jennifer,
Did you ever have this issue solved? If so, please post how did you figured it out. I'm having the same problem.
Regards,
Alonso

Why is Adobe Flash loading when clicking "Clear Recent History" and after closing Firefox when I have it disabled?

I have Flash disabled but it's loading when I delete history and close the browser. Why?

Why does Flash load when it's disabled at all? It will load even when not deleting anything, just during normal internet activities.

Why cannot I have my personal page load when I open Firefox

On Safari, my home page opens when I log on, and I can read my email. I would rather use Firefox, but I get my ISP's Generic home page, and have to supply my Screen name and password every time I log on, which is a nuisance.
Can this be corrected ?

Check the Home page setting.
*Tools > Options > General > Startup: Home page
See these articles for some suggestions:
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

How to load a page or page layout when click on hyperlink using jsf

Hi,
I created a hyperlink using a4j:commandlink, when i click on this link, i have to load a page. How to include the page using, <ui:include>, when i click on the hyperlink.
Please help me in this issue

Enclose your <ui:include> component in a <h:panelGrid> or a <f:subView> as said above, and use rendered attribute that is set to false.
When you click on the link, set the rendered attribute of panelGrid or subView to true. Now use reRendered attribute of a4j:commandLink to rerender the panelGrid or subView.
Also check this regarding RoseIndia .

Error on page load when trying to run the jsp appl. through JDeveloper

I created an JSP application using Oracle JDeveloper 9.0.5.2 and Business Intelligence beans 9.0.5. and i am using Embeded oc4j Server for running the application from the JDeveloper Environment.
All the presentations are existed in the Local Catalog of the application...
Configuration file of the Application is :
(Project1OLAPConfig4.xml):
<?xml version = '1.0' encoding = 'UTF-8'?>

<BIConfig>
<BISession DeploymentOption="LOCAL">
<BIUser Username="Local User"/>
<Debug Mode="ERROR"/>
</BISession>
<PersistenceConnection PCID="pc1" PersistenceType="FILE" RootFolder="bidefs/Project1BIDesigner4/" BootConnection="true"/>
<OLAPConnection OCID="oc1" ServerType="ROLAP" OLAPConnectionName="OLAPConnection1" HostName="twdpc232" SID="encore" PortNumber="1521" JdbcDriverType="thin">
<DADFile Filename="/Project1OLAPConfig4OLAP.dad" Obfuscated="false"/>
</OLAPConnection>
<MetadataManager>
<PersistenceConnection PCREFID="pc1"/>
<OLAPConnection OCREFID="oc1"/>
</MetadataManager>
</BIConfig>
Project1OLAPConfig4OLAP.dad :
Username:CS_OLAP
Password:CS_OLAP
JSP page is : (biuntitled1.jsp)
<%@ taglib uri="http://xmlns.oracle.com/bibeans/jsp" prefix="orabi" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<%@ page errorPage="cabo/bi/jsp/error.jsp" %>
<%@ page contentType="text/html;charset=windows-1252"%>

<% synchronized(session){ %>
<orabi:BIThinSession id="bisession1" configuration="/Project1OLAPConfig4.xml" >

<orabi:Presentation location="Presentation1" id="biuntitled1_pres1"/>
</orabi:BIThinSession>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>
BI Beans JSP Page
</title>
</head>
<orabi:BIBody>
<form name="BIForm" method="POST" action="biuntitled1.jsp" >
<orabi:InitBITags parentForm="BIForm"/>

<orabi:Render targetId="biuntitled1_pres1" parentForm="BIForm"/>
<p/>
<p/>

<orabi:InsertHiddenFields parentForm="BIForm" biThinSessionId="bisession1" />
</form>
</orabi:BIBody>
</html>
<% } %>

The Errors coming when loading the page are:
Line : 25
Char : 76
Error : ObjectExpected
Code : 0
URL : http://172.29.52.77:8989/Workspace1-Project1-context-root/biuntitled1.jsp
The same error is coming in the (line, char) combination are : (25,1);(30,1);(21,1);
Output of bicheckconfig :
BI Beans Diagnostics(v1.0.2.0) 8/23/04
===============================================================================
JDEV_ORACLE_HOME .......................... = c:\JDeveloper
JAVA_HOME ................................. = C:\j2sdk1.4.2_03
JDeveloper version ........................ = 9.0.5.2.1618
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.5.0
BI Beans internal version ................. = 3.2.0.37.4
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.3.0
JDBC JAR file location .................... = C:\JDeveloper\jdbc\lib
Database version .......................... = 9.2.0.5.0
OLAP Catalog version ...................... = 9.2.0.5.0
OLAP AW Engine version .................... = 9.2.0.5.0
OLAP API Server version ................... = 9.2.0.5.0
BI Beans Catalog version .................. = N/A; not installed in CS_OLAP
OLAP API JAR file version ................. = "10.1.0.3.0"
OLAP API JAR file location ................ = c:\JDeveloper\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 24
Number of metadata dimensions ............. = 5
Metadata output location .................. = C:\JDeveloper\bibeans\bi_checkconfig\bi_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Business Intelligence Beans Client Configuration" technical note, whose file name is bi_checkconfig_tn.html
These diagnostics are captured in: C:\JDeveloper\bibeans\bi_checkconfig\bi_checkconfig.xml
Can any body help me....
Thanks
Bhanu.

Copy the jdev_home/jlib/redist/uix2_install.zip file to
jdev_home/jdev/redist folder . It will overwrite an existing uix2_install.zip file.
Close and open the Jdeveloper IDE. It will prompt you for upgradation of projects. Press OK button in response.
Now you should be able to run the JSP pages.

Blank Pages Load When Opening Facebook Notifications in Notification Center

When I get a notification in Mountain Lion from Facebook I am unable to see the page that should be loaded. All I get is a blank page but the url appears to be correct. This happens if I have logged out of my account in the browser. When I am logged in it takes me straight to the notification and I can see it without any issues. This has been happening only in the recent weeks. When I first started using Mountain Lion (since it was released) I would instead be send to the default page that displays the content but ask you to log into a account.

I came here looking for a way to disable those sounds; there's no way to do so in notification center. Even when I select "none," the notification center, the status still displays "badges and sounds," and all I want is the badges. Currently, the only way to do this is remove FB altogether from notification center, which pretty much defeats the whole purpose of the notification center in the first place.
The world is already noisy enough; the last thing I want or need is for my my computer to be making unnecessary sounds.

PerformancePoint Designer is not loading when clicking on "Add new item" from PerformancePoint Content List

Hello,
I am using Internet Explorer 9 to create a new item by launching Performance Point Dashboard Designer from browser.
When i click on "Add new item", an Iframe will open showing dashboard design redirect which keep loading for couple of minutes and the designer never opens.
Yes, there are working workarounds like opening these links in other tab or opening dashboard designer directly or by clicking on "Run Dashboard Designer" from BI Center homepage.
However, Can someone please help me how to get designer opened when "Add new item" has been clicked from PerformancePoint Content List from browser?
Thanks in advance.
NKV Prasad Panthangi

An Update :
I found this is due to the browser limitation.
I have downgraded my Internet Explorer Browser to IE 8 and did the following changes in my browser settings.
Tools --> Internet Options --> Navigate to Security Tab --> Click on Custom Level Button --> Under Download --> Select "Enable" radio box for Automatic Prompting for File Downloads.
Sadly, I cannot ask users to downgrade their browser to IE 8 because MS already stopped support for this browser and there are no other solution for this except going by workarounds.
This clearly says why people are moving away from PerformancePoint Services in SharePoint.
Thanks
NKV Prasad Panthangi

Delay in page loading when clicking on context URL's.

Similar Messages

Maybe you are looking for