Delay playing back clips/timeline on 7.0.1 on Mac

Ever since I ran the update last week (i also ran today's update and still the same problem), I've been having these issues. When I go to play a clip in the source window, i get the spinning rainbow for a couple seconds and then the clip plays. Then when i jump back to the timeline to play at any given point, I get the spinning rainbow again for a couple seconds again. This only started happening with the latest update. I've tried transferring all the footage to a different drive (thinking maybe the hard drive was having issues), but that didn't fix the issue. Its really starting to slow me down. Anyone else having these issues?

http://forums.adobe.com/message/5527857?tstart=0#5527857

Similar Messages

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Audio Clicking and broken up when playing back from timeline

Can anyone please give me some advice about a possible solution to a continuing audio problem I am having when using the Tascam Fireone with Final Cut Pro 5.1.4. (Fireone working well with Logic 7 on the same machine)
The Symptoms are as follow:
When playing back edited clips or music from the timeline there are constant ugly pops and clicks.
Any audio or video and audio even with differing sample rates when played in the source monitor are unaffected and play perfectly.
I have tried everything I know and am now at a total loss as to what to try next.
Tascam's so called support ignore any communication from me about it, as do most people on this forum.
Any suggestions welcome.
Thank you

I think it is a driver issue between Tascam and Apple Firewire connections
It's all very frustrating as Tascam just do not respond to support questions well.
Thanks for your comments, it's back to the drawing board with the Fireone and Final Cut Pro, a great shame because it's cheap and very good with Logic.

Premiere cs5-trouble playing back in timeline. please help! (mac)

im working on a 20min video in cs5. ive opened it several times to work on it and its fine. the past few times ive opened the project it is extrememly laggy and now wont even hardly play in the timeline. half the time when i press play it wont play, where the timeslider is it takes like 30sec to show the clip its sitting on. i should mention half the clips have been worked on in after effects via dynamic link.
specs:
macbook pro
2.3ghz intel core i7
16gb RAM
nvidia geforce GT 650m
i know when im working on school computers (windows) they tell you to set the scratch disks to different drives (c/d/e/ etc.)
how can i do this on a mac? is there anything i can do to speed it up or make it work since i dont want to move everything to my external and relink files (to work on a different computer)?
i tried doing a render, but it was taking forever so i cancelled it. at the rate it was going it would take 3 days to render (not export) ughhh. if thats the case, how long do you think it would take me to export it?
should i just not even bother to use premiere on my laptop?
my main concern is what can i do now about my project to make it play, as this is for a job and i need it done ASAP.
would have been done hours ago if premiere would work.
**cleaned cache. rendered audio and effects but not whole work area if that makes sense. rendering the work area would have taken forever and thats why i cancelled it.
only effects i did in AE are just a series of color corrections and a mask.
its 1080p 30fps video.
audio plays back fine in timeline just not video

When you are rendering, are you up or down resing? ...what do you mean?
I mean are you outputing the same file kind, size and frame rate? Do you have the "Maximum Depth" checked or "Use Maximum Quality" ticked?
i used to render out AE comps as h.264 in CS6 and put them in premiere but premiere wouldnt ever find the media and would give me a green screen so i stopped doing that. dyamic link is the only way i can get AE comps to show up in premiere though i havent tried it with CS5
Weird. I've outputed files before and imported them just like any other media files without a hitch. That is a different discussion in itself.
i dont see any preview settings in CS5
Look under the program monitor at the bottom right. Should be a drop down menu to adjust previews. Or upper right corner of progam monitor ther is a pull down menu.
Also, have you tried using Media Encoder to do the render?
Message was edited by: EditorPete

Audio plays back faster than video in Quicktime formats on Mac

On both my iMac and MacBook Pro, both running Mavericks, 90% of videos dependant on the Quicktime codecs / engine have an issue where the video plays fine, but audio is almost always too fast. This results in the audio being of a higher pitch and drifting further and further out of sync. It affects videos played in Quicktime, the Quick Preview in Finder and even web-based video such as in HTML5 players. It's really weird that I can't find anyone else that is having this problem, and yet it is affecting both my machines! It's really frustrating as I work with video all day, and have to preview and review everything in VLC, which plays everything fine. Any ideas at all? I'm finding so many weird bugs and quirks in Mavericks I am strongly considering downgrading back to Mountain Lion, but I am dreading having to do two complete re-installs again.

Which version of AME do you use on which OS version?
If you are using VLC to playback, please update to the latest version. I remember the older version had the MXF audio playback issue. It seems this issue was fixed on the latest version.
If this is not the case, could you try playing back this file on Adobe app such as Premiere Pro? Do you see the same problem?

FCPX 10.1 Crashed after playing back clip in first converted library

I opened FCPX for the first time, and converted a single event and project into a library.
I attempted to playback a compound clip, which contained clips with NeatVideo and Lock and Load X applied, using my Blackmagic Design Intensity Extereme. This crashed my entire system and it restarted. Below is the error I got after startup.
I am using a late 2012 iMac and never had problems before. Is anyone else having problems with BMD drivers, Lock and Load X, Neat Video or Magic Bullet Looks with 10.1?
Anonymous UUID:       087938CE-C42C-2C4D-7E46-FF7E4B7681F6
Sun Dec 22 09:44:57 2013
panic(cpu 6 caller 0xffffff8005cdc19e): Kernel trap at 0xffffff7f877c5fcc, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8845d327f8, CR3: 0x000000005a66d045, CR4: 0x00000000001606e0
RAX: 0x00000000ffffffff, RBX: 0xffffff839607b800, RCX: 0xffffff8045d32800, RDX: 0xffffff83ae636f68
RSP: 0xffffff839607b790, RBP: 0xffffff839607b850, RSI: 0xffffff8049047000, RDI: 0xffffff8048fd8c00
R8: 0xffffff83ae636f68, R9: 0xffffff8045337a88, R10: 0x0000000000000000, R11: 0xffffff839607b698
R12: 0x0000000000000000, R13: 0xffffff8049047000, R14: 0xffffff804939f000, R15: 0xffffff8049047000
RFL: 0x0000000000010202, RIP: 0xffffff7f877c5fcc, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8845d327f8, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff839607b420 : 0xffffff8005c22f69
0xffffff839607b4a0 : 0xffffff8005cdc19e
0xffffff839607b670 : 0xffffff8005cf3606
0xffffff839607b690 : 0xffffff7f877c5fcc
0xffffff839607b850 : 0xffffff7f877398c9
0xffffff839607b870 : 0xffffff7f8773a362
0xffffff839607b8b0 : 0xffffff7f877c58f1
0xffffff839607b940 : 0xffffff7f877a36fd
0xffffff839607b990 : 0xffffff7f877a494d
0xffffff839607b9b0 : 0xffffff7f877a27e3
0xffffff839607b9d0 : 0xffffff7f877a240e
0xffffff839607ba10 : 0xffffff7f877296de
0xffffff839607ba40 : 0xffffff7f87735031
0xffffff839607baa0 : 0xffffff7f877a2fe0
0xffffff839607bae0 : 0xffffff7f87727d05
0xffffff839607bb70 : 0xffffff80060cccda
0xffffff839607bb90 : 0xffffff80060cd83e
0xffffff839607bbf0 : 0xffffff80060cb28f
0xffffff839607bd40 : 0xffffff8005cb6008
0xffffff839607be50 : 0xffffff8005c26bb1
0xffffff839607be80 : 0xffffff8005c139b5
0xffffff839607bef0 : 0xffffff8005c1e003
0xffffff839607bf70 : 0xffffff8005cc921d
0xffffff839607bfb0 : 0xffffff8005cf3e26
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7f8771e000->0xffffff7f87776fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f862ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8639b000
         com.apple.GeForce(8.1.8)[68DC25D4-7371-3980-BBFB-FD4473EBD8B8]@0xffffff7f877830 00->0xffffff7f87811fff
            dependency: com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7f8771e000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f862ba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8689a000
            dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f868aa000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8639b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000005a00000
Kernel text base: 0xffffff8005c00000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
System uptime in nanoseconds: 57604903245627
last loaded kext at 17725036738815: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f88320000, size 20480)
last unloaded kext at 17823879665386: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f88320000, size 16384)
loaded kexts:
com.blackmagic-design.desktopvideo.iokit.driver          9.9.3
com.blackmagic-design.desktopvideo.iokit.framebufferdriver          9.9.
com.nvidia.CUDA          1.1.0
com.Cycling74.driver.Soundflower          1.5.1
com.Areca.ArcMSR          1.3.7
com.apple.filesystems.udf          2.5
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleRAID          4.0.6
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AGPM          100.14.11
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHDA          2.5.3fc1
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.GeForce          8.1.8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleMikeyDriver          2.5.3fc1
com.apple.driver.AppleIntelHD4000Graphics          8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleLPC          1.7.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleIntelFramebufferCapri          8.1.8
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBXHCI          650.4.3
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.driver.AppleThunderboltPCIUpAdapter          1.4.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.5.3fc1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.nvidia.driver.NVDAGK100Hal          8.1.8
com.apple.nvidia.driver.NVDAResman          8.1.8
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.AppleHDAController          2.5.3fc1
com.apple.iokit.IOHDAFamily          2.5.3fc1
com.apple.iokit.IOAcceleratorFamily2          98.7.1
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleThunderboltEDMSink          1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIParallelFamily          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i7, 3.4 GHz, 32 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 680MX, NVIDIA GeForce GTX 680MX, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E4D3136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E4D3136
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E4D3136
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E4D3136
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
PCI Card: pci17d3,1880, RAID Controller, Thunderbolt@11,0,0
PCI Card: pci1b4b,9182, AHCI Controller, Thunderbolt@15,0,0
PCI Card: Intensity Extreme, Video, Thunderbolt@19,0,0
Serial ATA Device: Hitachi HDS724040ALE640, 4 TB
Serial ATA Device: Hitachi HDS724040ALE640, 4 TB
Serial ATA Device: APPLE SSD SM768E, 751.28 GB
USB Device: My Passport 0748
USB Device: Hub
USB Device: SuperMulti RW
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB 2.0 Hub [MTT]
USB Device: iPhone
USB Device: EPSON Epson Stylus Photo PX730 Series
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 23.4
Thunderbolt Device: ARC8050, Areca, 3, 26.2

Same experience here, several times.
One time I even lost the project. The good news is that FCPX is now automatically creating back ups from your libraries.

No Sound When Playing Back from Timeline

IIn Captivate 5, I have text to speech waveform showing in the timeline but no sound when previewing.
Soud does play in audio edit mode or when published. Makes it difficult to adjust timing.
What am I missing?

Hi Jack
My own guess is that you clicked the speaker icon in the Timeline to mute audio. If that's the case, click the icon to toggle the state.
Check the image below. (click to view larger)
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Program Monitor - I'm not seeing whole clip when playing back

I'm real worried! Having spent days of my life importing video and editing it - and then trying to fix my problem of only seeing a part of the playing-back clip in the program monitor which led me onto your site. I've spent hours looking at your posts (and indeed Adobe help pages) trying to solve this and clearly (I think!) my original sequence settings have been wrong. Maybe I can come back to that because I'm really not sure how to set these correctly. My initial question please, if I complete my editing and then export this file, will I still only see part of the clips in the final version, or will I see the whole of the original movie clip?
Some information:
- Windows 7
- Premiere Pro CS4
- Program Monitor setting is "Fit"
- 16:9 aspect ratio
- PAL (based in the UK)
- Sony HD camcorder - SR12E
- 1920 x 1080i HD
Phew, hope that's enough information for you to 'kick start' me!
Thank you.
Regards, Doreen.

Would you also be able to tell me if the Sequence Preset below is my correct preset for the future. Thanks.
- AVCHD
- 1080i
- AVCHD 1080i30 60i (Amamorphic)
Oh, it's like a new language!
Regards,
Doreen.

Recorded videos on iPhone 4S don't play back properly on PC

I've been trying for about two weeks to get videos I record on my new iPhone 4S (iOS 6) to play back properly on my computer running Windows XP.
Most recently I installed Filmic Pro 2. One of the reasons was to be able to record the videos in lower resolution, hoping maybe the reduced file size would help the files to behave properly on my computer.
The video files I just recorded and transfered to my PC using DiskAid (in MOV format) play back perfectly in VLC Media Player, but when I play them using QuickTime there is just a black screen with audio. The same thing happens when I import them as clips in Camtasia Studio - only a black screen with audio when playing back the timeline. These videos are 1280x720 and range from 97 MB (about 1 minute) to 430 MB (about 5 minutes) in length.
Regarding DiskAid, the previous version I had installed started crashing every time I ran it with my phone connected - it would crash as soon as it began loading the camera roll. I just installed the latest DiskAid update, and this version successfully copies videos from the camera roll to my computer without crashing. But there is the black screen problem with these videos.
Does anyone have experience with this problem or suggestions that might help?
Thanks!

This solution that worked for me and i’m using Windows 7:
Uninstall Quicktime 7.7.2 and reinstall the older version 7.7.1, here’s the link for it:
http://www.oldapps.com/quicktime_player.php?old_quicktime=6769?download

Premiere CC crash while playing and zooming timeline

Regularly crashing Premiere CC now while playing back the timeline, I zoom in and out on the timeline using my +/- hot keys and Premiere CC will crash. I hate to say it but Premiere is starting to become unstable like my prior copy of Sony Vegas Pro. It's frustrating.

It's a generic error so unfortunately, it doesn't say much.
"Adobe Premiere Pro CC has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available."
I click 'Close program' and Premiere CC goes away. For my setup, ti's pretty easy to replicate:
1. Open sequence. Starting playing.
2. While it's playing, click somewhere on the timeline and start zooming in/out with +/- keys. The crash will occur shortly afterwards.

Inputs won't playthrough while playing back

Recently I had to trash my prefs for Logic Pro 9 which worked perfectly. I could play along with a track and had no issues. After the trashing of the prefs I can no longer hear what I'm playing while I play down the timeline (A/D is a Mackie Onyx 820i). If I record I can hear it play back while I playing, but if I just play back the timeline and play along I can't hear the, in this case electric guitar. I rechecked my Mackie settings and they haven't changed and I reset the prefs in logic:
I have tried it with 'Independant Monitoring Level' both checked and unchecked which made no difference. I know it's probably something I didn't check but for the life of me I can't remember what it was.
Thanks!

Figured it out. Thanks anyway.

Not playing back in DVD player

Hello all,
I made a DVD in DVD Studio Pro, and it played back perfectly in the DVD player on my mac. Then I went to play it in 2 other DVD players, and it wouldn't recognize the media. I also couldn't play it on a PC player. I have no idea why. Any input is greatly appreciated.

You can find your files by looking at it's rendering list. There will be a little magnifying glass next to the file name, click on it and the browser will open revealing the file for you.
Actually DVD SP makes fine HD DVDs, you just can't play them much of anywhere. Compressor will make Blu-Ray DVDs in a couple of different ways, some of which are very limited but will work. You can get more extensive menuing by creating the Blu-Ray media in Compressor and using Encore, if you have it, to author the disc. But these methods are not as comprehensive as many of the other applications out there for BR authoring.

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

Captured clips are playing back at least TWICE as fast

Hey all- I am capturing HD footage from a JVC Pro HD camera - footage shot at 24P. Everything seems fine with the capture (except for the fact that there is no device control - only capture now), but when I play back the captured clips I hear the audio playing at normal speed but the video is playing back at leat at twice the speed - all actors are in FAST motion. I hear the crew and director speaking, getting ready to shoot as I watch the scene start and speed through and end right as the clip ends.
Any ideas? Is it a setting on the OUTPUT for the camera?
Thanks for any help.
Cayce

Neither Final Cut Express nor Final Cut Pro support
720p24 material. You need a product like HDVxDV to
bring it in.
Tom-
Thanks for getting back to me last night. You seem to be a master in these parts. I am new here. I am really a director and writer but through my production company I have done a number of things in FCP over the years, always without any problems. That is until the introduction of HD and 24p at which time I sort of started saying to our amazing editor "whatver you say" and clouding over with confusion. After I got your message I went and got FCP 5 from the Apple store in an attempt to keep my friend, whose short we were trying to edit, from crying. Once installed and running we had the same issue as we had in FCE HD - the video - in terms of quality - was captured perfectly, but the clips would play back at almost twice the speed that they should have. I tried virtually every easy set-up that pertained to HD and nothing worked. On a few of them I could get an actual Log and Capture window to come up but when I went to play the material via device control there was no image, althoug I could see TC running. A friend suggested that you have to take the captured HD 24p clip and bring it into the timeline and render it for it to work. Is that true? I tried it to no avail. So, he shot on JVC GY-HD 100 at 24p. I now have FCP 5 HD and am considering buying LUMIERE software that purports to streamline this very issue. Any thoughts or suggestions you may have for me would be greatly appreciated.
Thanks so much,
M Cayce Lindner

Delay playing back clips/timeline on 7.0.1 on Mac

Similar Messages

Maybe you are looking for