Delay start of a quicktime

Is there anyway to delay quicktime starting on a web page, like with an embed parameter? Controls like "volume", "loop", etc are so easy to work with, is there one for delay starting?

I still want it to run automatically but be able to adjust the start time. Can anyone explain how to use "starttime", here is the explanation, but I don't understand:
STARTTIME=time (optional...requires QuickTime 4)
The STARTTIME attribute defines the first frame of the movie. STARTTIME can be any time within the length of the movie. By default, STARTTIME is the first frame of the movie (or 00:00:00). This attribute takes a time value in the form Hours:Minutes:Seconds:Frames (30ths). The frames component can be specified as a fixed point number so that more specific times can be specified for instance 3:30:22.5 means 3 minutes, 30 seconds and 22.5 frames.
Sounds like what I need but can't get it to work, what is "frames"? thanks

Similar Messages

Cant start iTunes nor Quicktime

When i start iTunes or Quicktime, they won't open, i'm getting an error.
All worked fine, when i had my previous system on my last hard disk. I decided to buy a new WD 1TB harddisk. I did format and installed windows, but when trying to open the iTunes now (to sync music with my iphone) i'm getting an error, the same happens when trying to open quicktime player. Haven't got them working since I got the new WD HDD. Really need help with this!
I have windows XP service pack 3 installed, if it's necessary to point out. iTunes is ver 8.1.1.10 and Quicktime ver 7.60.92.0. If more information is needed to make it easier to solve the problem, then just ask.
I would be very grateful, if this problem get's a solution.
My english grammar might not be good for i am estonian.
iTunes error:
http://www.writech.pri.ee/ituneserror1.bmp
http://www.writech.pri.ee/ituneserror2.bmp
Quicktime error:
http://www.writech.pri.ee/quicktimeerror1.bmp
http://www.writech.pri.ee/quicktimeerror2.bmp

In addition to Pamela Gadsden's advice, BEX errors in quicktime can be due to the installation of incompatible codecs.
iTunes can not work if Quicktime does not.
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
If so uninstall them, they are know to cause problems with Quickitme.
The list of problem codecs may not be complete, suspect any recently installed codec or converter software.
Then download the version of Quickime without iTunes:
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.

Delaying start time for Nokia 925 Aps?

Is it possible, delaying start time for Nokia 925 Aps? For. egzample, Night watsch (uses a lot of batteries).
I need to be visible from 5:00. Is it possible, make it automatic startup 5:00?

hi mate, sorry to hear about your experience. in this case, the fault may lie with the Nokia Care point's handling of your device. in this case you will need to persist with them until they either fix it or issue you with a replacement. else if they are not being conducive to the matter, then you will need to take up the issue with head office of Nokia in your region.

CmRcService Delayed Start (Remote Control Service)

Anyone know why Microsoft set the CmRcService service for a delayed start and not automatic? After a reboot of the remote computer, it is taking a few moments to connect. I am assuming that was done for a reason. Before I change the service on all of our
computers; does anyone know why they did that?

It's not just the Remote Control Service. CcmExec.exe (SMS Host Agent) is the same. They are simply not critical and IMO they start up quickly enough.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Zen (Agent) service delayed start

Hi!
ZCM 10.3.3 on SLES 11 SP1, Windows XP and 7 ws's. One problem or thing I noticed long time. When device is restarted then even ZCC show ws in green and agent service is started on on ws it seems to that Agent Service start is not in effect ... delayed for minutes. I mean, when I have set something for setup on device boot then it takes some 10 minutes or so (depends on ws, but even fast one has delay) to start this installation (device is refreshed and app is cached). Also, most worrying for me is that on computer labs we use for students dynamic volatile profiles and we rely fully on Novell Application Launcher (from ZfD days) to get apps and when device is just (re)started student can login, but NAL window does not appear - empty Desktop. Something I can do about this delayed start or it is by design so.
Sorry, can't explain it more in details as every service on ws and server is ok as service. Just seems to on ws it does not take effect right away after ws is (re)started. Hope You understand what I mean.
More thanks, Alar.

Hi again!
Usually it (delayed service "wakeup") is not a problem as I start all ws's on site on workdays at morning and shut them down at evening. But, when on some reason user does restart ws (even shutdown/restart is removed as option for user, but ... sometimes hardware let You down etc.) or ws's is needed at weekends (also in computer rooms) then ... I'm little bit in trouble!
Alar.

Oracle XE Listener Requiring Service To Be Set To 'Automatic (Delayed Start

Can anyone offer any insight/explanation as to why the Oracle Listener would require the service to be set to 'Automatic (Delayed Start)' When it is set to just automatic, it does not even try to start. No output to the listener log, and nothing to the event viewer. It is as if it never even tries to start. Once switched to 'Automatic (Delayed Start)' it works as expected. Additionally if you manually start the service due to it not starting automatically, it works fine as well.
OS: Windows 7 64BIT
Service is being run by the local system account and is set to allow to interact with desktop. -Local system account is part of the administrator group.

OS: Windows 7 64BITFirst point, win7 isn't on the 10g XE "supported OS" list. The installer is nearly as old as Firefox 1.0. Not to say folks haven't been able to get it working, plenty of other threads cover that topic.
Delayed start, auto start ... how critical is that functionality for your install? My suggestion, set it to Manual, and if you need the database, start the listener and then start the database service. If the database isn't needed keep your RAM and system resources available for other stuff.
Sorry can't be more helpful (esp. for win7, don't have it, don't use it, same for vista) but XE is more of a "playground" environment for test drives, kicking the tires, etc., a practice resource intended as an introduction to managing an oracle instance.
And always start the listener service first, that allows the database to register with the listener as it completes its startup processing. If startup goes the other way around, the Apex might not be immediately available, but a sqlplus system connection and `alter system register;` command will fix that.

Cant start iTunes or quicktime

I have just bought my first ipod and installed the package from the start page. However i cannot start itunes or quicktime. I get the well known "iTunes has encountered a problem and needs to close......"
I have tried reinstalling 10 times and to run msconfig as mentioned somewhere in the support forum.
What am i doing wrong? Why done a new purchase start with this?
Brgds Veilstrup

I am getting this exact same problem too - the message is the one you get if a programme closes unexprectedly in the middle of something you're doing (ie the programme has opended up OK and you're in it), BUT iTunes hasn't even opened up yet (or quick time) - it happnens whilst I'm trying to open iTunes. If I try to open QuickTime on its own the same thing happens. The frustrating thing is that the message itself gives you no clue as to what the problem is as it's not an error message as such.
I have re-installed iTunes (with QuickTime) twice and nothing changes.
Can anyone help?

Delayed start of netweaver system

Since yesterday our SapNetweaver based Enterprise Portal has a huge delayed start. Normally it takes about 10min until the system is up & running.
Now it takes about 2 hours.
System: NetWeaver 7.30 SP8 on HPUX
In the Log dev_server0 are only garbage collection or some CMS entries between State changed from 2 (Starting framework) to 10 (Starting apps) and State changed from 10 (Starting apps) to 3 (Running).
No other log in /usr/sap/SID/InstanceNr/work directory is written while the systems starts (except for std_server0.out and available.log)
The default respectively the application log in /usr/sap/SID/Nr/j2ee/cluster/server0/log are not really helpful.
So has anyone a idea or a hint where i can find a useful entry in a log?
Best regards
André

Hello André
In most of the cases, the J2EE Engine spends most of the time in Starting Applications phase. IN order to diagnose the issue, you need to capture 4-5 thread dumps at an interval of 1 min each on all server nodes. Generally, most of the Application Threads are blocked by a thread. Once you find such thread, you need to diagnose in that direction. There can be long tunning DB calls which can block applications threads. You may refer below sap link for capturing and analysing thread dumps:
(JSTTSG)(Deploy)Thread Dump - Technology Troubleshooting Guide - SCN Wiki
I hope this will help you!!
Thanks,
Tapan

"SMS Agent Host" Automatic (Delayed Start)

Hi,
Our support think it take longtime to reconnect with the "Remote Control Viewer" if you rebooted the "Windows Client"
The "SMS Agent Host" is set to Automatic (Delayed Start), and I have seen both it is okey to change it to "automatic" and not. I found an post that it should be okey to set it to "automatic"? Is there any issue to do so?
https://social.technet.microsoft.com/Forums/en-US/c339a6cc-fb0d-4b15-8fed-06caee20b003/delayed-startup-on-sms-agent-host-service?forum=configmanagerdeployment
/SaiTech

Hi,
The remote control agent is separate from the SMS Agent host and can be changed to Automatic, see this previous thread.
https://social.technet.microsoft.com/Forums/en-US/778e5454-a968-4c5c-87df-470636e5e29b/changing-the-service-start-on-configuration-manager-remote-control-service?forum=configmanagergeneral
The reason the SMS Agent host is set to delayed start is to not effect the startup time for the user..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Delayed Start-up

Hello, I am hoping someone can help. I have recently ben noticing delayed start-ups. When I press the start button on my Macbook, it gives a blank, black screen but the light on the front (left side - the one that snores when it sleeps!) comes on. Then after 10-20 seconds it boots up properly showing the grey screen with the apple logo. It takes ages to load the desktop (compared to what it used to). Any ideas? I am going away next week so can't give it into an Apple shop genius place as they have said it will take longer to look at than that.
Thanks in advance,
Ruth.

Yes it gets a fair amount of travel - I go to the office everyday. But not much heat. Yes everything is backed up about 5 times but that's not my issue at the mo. I am reliant on it acually functioning when I go away for research as my linguistic experiment runs on it. I've only had the new hard drive for just over 3 months! It went at the end of December last year. I will definitely take another whole laptop with me when I go away. Hopefully something will work at least!
Thanks for the advice, but I think I'll have to just wait and see what happens. I took it into the apple shop this morning and as the clicking sounds didn't happen in front of them, they can't do anything about it!!

Delayed start time

I have a delayed start time on my MacBook Pro, not associated with any event.. 1-2 minutes of grey to blue screens before I am able to use my machine. Otherwise working well. Any suggestions? Much appreciated..

What version of Mac OS? Have you booted to the install DVD (or recover disc) and run Disk Utility to repair permissions and repair the disk?
Try reset the PRAM by shutting the machine down, the start the machine and quickly hold the key combination <CMD>+<OPT>+p+r until you hear the restart chime three times. Then release the keys.

Delayed start up - if start up at all

Sometimes my computer has delayed start up and somtimes it wont start up at all.
I saw that a lot of people had this start up problem too but all threads stopped in October. Does that mean you solved your probelm?
I am also experiencing the "black screen" problem after wake up.
Additionaly when I move my computer while in sleep mode with the lid closed it always wakes up.
So that's 3 problems
-Start up delayed or no start up at all
-Black screen after sleep
-Sleep mode defective
I had these problems before the latest firmware was released.
I installed the latest firmware but it has not sovled any of the above issues.
Is there any hope to get this fixed by Apple if I bring it back to the shop?
MacBook Pro 2 GHz Mac OS X (10.4.7) 1 Go DDR2 SDRAM

I actually had similar problems that you describe on my first gen MBP. Mine was solved by removing all peripherals (external usb devices, dvd/cds), then going into disk utility to repair disk permissions.
You might have to boot from your OSX dvd or a backup that has disk utility on it. You can't repair the disk if you have errors on it.

Delay start of background audio?

Is there any way to delay the start of the background audio track?
I'd like the video to start first, silently, and have the audio come in a second or two later. I can pin the audio to the first still image but if I later move that to rearrange the order of the first slide then I have to fix up the audio...
If I could delay the start of the background audio I'd avoid that problem.

I still want it to run automatically but be able to adjust the start time. Can anyone explain how to use "starttime", here is the explanation, but I don't understand:
STARTTIME=time (optional...requires QuickTime 4)
The STARTTIME attribute defines the first frame of the movie. STARTTIME can be any time within the length of the movie. By default, STARTTIME is the first frame of the movie (or 00:00:00). This attribute takes a time value in the form Hours:Minutes:Seconds:Frames (30ths). The frames component can be specified as a fixed point number so that more specific times can be specified for instance 3:30:22.5 means 3 minutes, 30 seconds and 22.5 frames.
Sounds like what I need but can't get it to work, what is "frames"? thanks

ITunes and Quicktime hanging on start up after Quicktime v7 update

Heya,
After updating my OS from 10.3.4 to 10.3.8 then 10.3.9 and installing Quicktime v7 iTunes and Quicktime hung on start up. Neither load. All i wanted was to get ready for adding video to my iPod and now nothing loads at all! Any Ideas??
Thanks
G5 Mac OS X (10.3.9) ipod

Same exact problem here. Obviously this is not our computers, it's a bug in the new release of itunes and/or quicktime.

Problem With Listener Service: Long Delay Starting Listener, Intermittent Connections

I am having trouble connecting to my Oracle database. I'm not sure what the cause was, but now when I connect to a database that has been working fine for the past two years, I usually get a ORA-12541 error.
I run lsnrctl status on the server and get a prinout like this:
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dqaswn02)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
I've also tried manually stopping the service via services.msc and then restarting via lsnrctl start, but when I do this I get a really long delay (10+ minutes) before it returns with something like:
TNS-01153: Failed to process string: 0í≈♥
I'm pretty lost as to what is wrong. I've been messing around with listener.ora, but I don't see anything problematic in there. Here's a copy:
# listener.ora Network Configuration File: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
# ADR_BASE_LISTENER = E:\app\myc0714
LOG_FILE_LISTENER = LISTENER
TRACE_LEVEL_LISTENER = SUPPORT
TRACE_FILE_LISTENER = LISTENER
However, a few times during this I've been able to connect to the server, via sqlplus, but it has taken 10 minutes before the connection comes online. Once I'm connected, I can query my tables as expected, but I need an application to connect.
If anyone has any ideas on what could be wrong, please let me know.

When I opened up netca, I didn't have any listeners configured, which seems very strange. When adding it, I get this message in the cmd window:
Oracle Net Services Configuration:
Configuring Listener:LISTENER
ServiceAliasException: Could not save Service Alias: TNS-04406: Object already e
xists
Default local naming configuration complete.
Listener configuration complete.
Oracle Net Listener Startup:
    Running Listener Control:
      E:\app\myc0714\product\11.2.0\dbhome_1\bin\lsnrctl start LISTENER
    Listener Control complete.
    Listener start failed.
I killed the service via services.msc again and tried starting the lsnrctl. This time I've got a new listening service going:
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is E:\app\myc0714\product\11.2.0\dbhome_1\network\admin\li
stener.ora
Log messages written to e:\app\myc0714\diag\tnslsnr\DQASWN02\listener\alert\log.
xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DQASWN02.petroleumplace.
com)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521
ipc)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DQASWN02.petroleumplace.
com)(PORT=1521)))
TNS-01153: Failed to process string: X☺∙♥
I just tried starting the trace. I'm waiting for it to connect, I guess. I'll post anything I get out of it when it returns.

Delay start of a quicktime

Similar Messages

Maybe you are looking for