Delay video start in Motion 4

I imported a video into Motion 4. I would like to see the first frame of the video for the first 5 seconds and then I would like the video to start playing. Is this possible?
Thanks.

I found what I was looking for. The Hold Frame behavior.

Similar Messages

  • Camera/videos start up delay?

    new to the treo family. i was just wondering wat would cause the camera and videos to delay when starting up??
    Post relates to: Treo 680 (Unlocked GSM)

    Hello and thank you for using the Palm Help Forums!
    Free space. If you have little free space the device is going to operate slower. The Palm devices use whatever is left of free space as thinking room. Smaller the space the slower the device will be. This can also affect things such as freezing and automatic restarts. If you have a lot of memory being used, you may want to invest in an SD card. You can use the SD card to store pictures, music, some programs, and other media related items.
    I hope this information is useful and let me know if you have any further questions.
    -Pat
    Post relates to: Treo 800w (Sprint)

  • Delayed autio start/sart stop w/ SRSS 4.2 + SRWC 2.2 + Flash MMR + Sound

    I've installed the most recent version of everything and made sure that the dtu's firmware was upgraded. I also installed the MMR which has the flash accel into my XP VM.
    For the most part it all works as expected. Here are my observations:
    When I start IE and go to youtube, the browser will occasionally crash. Generally browsing the web will result in random ie crashes. Before the MMR install I had no issues.
    When playing flash videos, the audio start and stop will lag by a second or two. The audio is actually synced (i specified the sun audio rdp driver rather than the MS audio rdp driver). The little flash icon in the status bar shows that both video and audio are enabled.
    So anybody else see the delayed audio start and stop?

    segfaultcoredump wrote:
    I've installed the most recent version of everything and made sure that the dtu's firmware was upgraded. I also installed the MMR which has the flash accel into my XP VM.
    For the most part it all works as expected. Here are my observations:
    When I start IE and go to youtube, the browser will occasionally crash. Generally browsing the web will result in random ie crashes. Before the MMR install I had no issues. We have not seen this during testing. If you have an sites where this happens, or reproducible test cases please let us know.
    >
    When playing flash videos, the audio start and stop will lag by a second or two. The audio is actually synced (i specified the sun audio rdp driver rather than the MS audio rdp driver). The little flash icon in the status bar shows that both video and audio are enabled.
    So anybody else see the delayed audio start and stop?Again, we have not seen this in testing. Does it happen with all flash or just some? We tested a lot with YouTube videos and they worked fine. If you have any specific flash that this happens with please add some links here.
    I wonder if this is a bandwidth issue. You need about 6.5 MBit/s between the Sun Ray server and the DTU to effectively play a flash video from YouTube.

  • Capture video according to motion detector wireless in labview

    HI
    I am new to labview and this NI forums so basically new to everything and i might sound like as if i am asking stupid questions.
    This is my final year capstone project, For that i have to capture video according to motion detor response wirelss using labview. So how would i go about that.
    Thanks
    Solved!
    Go to Solution.

    Thanks for replying.
    I don't really think that it would matter what kind of camera I am using as long as it transmits single(looking to use USB).
    So whenever the motion detector detects movement, the video camera would start recording video automatically. And everything has to be wireless.(the program would see if there is movement after every 45 seconds and if there is movement then it would continue to record otherwise it would stop the recording automatically.)
    As the picture shows, for the first part -- I would have motion detector connected with microprocessor(any kind of pic) and microprocessor to video camera(so it would be like one circuit).
    and then the second part -- receiver would be connected to PC and whenever the camera starts recording video it would save the recorded video on harddisk.
    Thanks.
    Thanks
    Attachments:
    proj.JPG ‏9 KB

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Trying to place an image before a video starts

    I have a very preliminary website with some flash and video. It passes the validator. The flash and video work but the video software isn't able to show any of the video until someone presses the play button - it just shows a black box.
    According to the video software provider, their player can't show a preview image. I wonder if it's possible to "overlay" an image with the same div, then have it disappear or move to the background when the play button is clicked.
    Failing that, does anyone know of a similar program which can insert a video easily into Dreamweaver? The one I'm using was cheap and easy but if it can't/won't do what I need it's a waste of time and effort.
    For some reason I can't paste the code...

    I don't think the suggested method (<div> background image) will work with the example Web page video you linked to.... here is why...
    Inside the <div> is code for a special Windows Media Player... (not a very good choice by the way)... meaning that the <div class="videobox"> has content (the video player) which will cover over the background image.... leaving the black box and some controls showing.
    Code also contains an IE conditional statement and nothing in the
    <!--[if !IE]>
    so nothing displays in FF.... nix all that player code and use something else.
    A better route (in my opinion) would be to first choose a better video type than mpeg (better compression and quality per file size)... choose an mp4 for example.
    Now you have a much wider range of player options.
    For example:
    http://flowplayer.org/
    http://www.pickleplayer.com/
    http://www.longtailvideo.com/players
    Any of these players plus an mp4 file would be much better than your current choice. They all support a "poster frame"... or image that displays before the video starts.
    If you need to convert mpeg to mp4, Handbrake does a good job:
    http://handbrake.fr/
    Best wishes,
    Adninjastrator

  • Quicktime plays video in slow motion

    Quicktime plays my video from a Sony NEX-3 camera [H.264 MP4 files] in slow motion. The images plays at a reduced speed, while the sound plays at full speed. One consequence is that image and sound is completely out of sync. The video plays fine in iMovie and MPEG stream clip.
    I tried in two Macs: a Macbook Air (10.6.6) and a Macbook (10.6.5) and on both the video is slow motion, but on the Macbook it is extreme slow motion, while on the Macbook Air it is slight slow motion [mainly noticeable through lack of sync between image and sound].
    Video from iPhone 4 plays without problems in Quicktime.
    Since iMovie plays the Sony video fine, I would assume it is not a Sony video problem, but a bug in Quicktime. How do I get Apple to fix that bug?

    How do I get Apple to fix that bug?
    You can provide Apple feedback at: http://www.apple.com/feedback/.

  • Why do my audio and video start in sync, then quickly go out of sync?

    I've just installed Windows 8 and also purchased Premiere Elements 12.
    I've also got Windows movie maker.
    When I play my clips in Premiere Elements, they audio and video start of synced, but quickly go out. This doesn't happen with Windows Movie Maker and I had trialed some NCH video editing software also and didn't have that problem.
    can someone tell me what I need to do to get this working right?

    MASMAS
    The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
    a. What is the file extension for this file? .MOV or .MP4?
    b. Does the iPad describe it as 1080p or 720p?
    c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
    Two immediate troubleshooting avenues are going to be in the direction of...
    a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
    Please see what you can put together in the way of video details, and we will sort this out.
    Thanks.
    ATR

  • First Play at Preview ok, but not working correctly when Video started from DVD

    Hello
    I created a Project with Encore CS5.1. When i test via the "preview" button (disc symbol) everything works fine.
    When i export the Project to a DVD the Video starts directly with the Main Menue although i expect starting with the intro clip. As i said with encore preview everything works fine.
    Has anybody an idea how to solve this issue?
    Thanks in advance
    Rene

    Hi Bill and John
    Thank you for your feedback.
    Attached i'll send you a screen shot of the flow chart and the specs.
    I just created a new project with only the "Vorspann - Trailer" and the Main Menue. All other links are not created yet.
    With the preview everything is ok but if i create an image the video starts directly with the Main Menue.
    Kind regards and thanks again.
    Rene
    With preview ok
    Crate an image or DVD > video starts with direct play of the main menue

  • Reading cue point parameters on video start

    Im trying to create a table of contents to navigate to various points in an .FLV file.  I've encoded the flv with cue points in media encoder. I've also added a parameter to each cue called toc_title with the lable that should represent the time in the video to jump to. It occurred to me though that those parameters might not be available to my flash player until the frame of the cue was reached. I need my toc to be visible when the video starts. First of all, is this entirely the wrong approach? I want to make this video player as dynamic as I can and would like to reuse it for several different videos with different TOCs. Is the parameter data set on cue points available at any time in the video playback or only when the cue is reached?  Thanks, John

    Hi John, You may receive more advice and help on the Flash forum. You can start a thread there or perhaps some threads may already be discussing your concerns.
    http://forums.adobe.com/community/flash/flash_general?view=discussions&start=0
    Hope that helps.
    eidnolb

  • Since downloading Rosemite I have had long delays in starting up my iMac ?

    I downloaded Yosemite on my iMac on 20.10.14 and have been experiencing long delays in starting up each day ?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes   after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract—not at the end.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A GPU restart report has a name that begins with "Kernel" and ends in ".gpuRestart". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

    My SD video keeps jumping between the upper and lower frames.  So the video starts frame blending and blurring in and out.  The sequence settings are set to
    Editing Mode: DV NTSC 29.97 frames/second. 
    Pixel Aspect Ration: D1/DV NTSC (0.9091)
    Fileds: Lower Field First
    Display Format: 30fps Non-Drop-Frame Timecode
    720 x480

    What is the source of your video, and exactly what is inside your video?
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Video iPOD.. playback stops then video starts.. no audio

    I have had the video ipod for @ 1 month .. I put a few movies from a dvd using Videora and DVD Decrypter and they worked great. Then, I believe, after the iPOD software update now the original movies and new movies work for short while then it looks like it pauses.. then the video starts back up and works fine but I have no audio.

    I'll copy and paste instructions on how to roll the iPod back to a previous install WITHOUT having to deleted it all and start over. They were:
    This is step by step what I did (on a Windows system)
    Step 1: Make your ipod a hard disk.
    Open your ipod options in itunes and click the option making your ipod an external drive.
    Step 2: Make sure you activate "Show Hidden Files and Folders" on your computer.
    Step 3: Go into "My Computer" (with your ipod connected) and open up your ipod by clicking on that drive.
    Step 4: Select the "iPod_Control" folder and then select the "Device" subfolder.
    Step 5: There is a file in there called "SysInfo" -- open it.
    Step 6: When I did this, my computer asked me what I wanted to open it with... I chose the generic text reader. When it opened, there were several lines of text, I found where it said "buildID" and then I replaced the number that was there with: 0x05108000 (6.1).
    Step 7: Close this text file. It will ask you if you want to save, and yes, you do.
    Step 8: Now run an older updater, either Updater 2005-11-17.exe or iPod Updater 2005-10-12.exe. You may have this in your ipod folder (probably under "Program Files") or you can load it using the software that came with your ipod. When it loads, make sure you click "UPDATE" instead of "RESTORE"
    That should do the trick. If you still have problems, please state what specifically they are and I'm sure that I, or someone here with more knowledge than me, can help.

  • A video made with Motion for your viewing

    I haven't seen many people post videos that they've made in this forum, so I hope it's not too self-promotional to do so. I regularly check the iWeb forums, and over there people regularly post samples of their work, which I think is good, cause I can get some ideas from this.
    Well, I made this video entirely using Motion, so I thought people here might be interested. If you're a Motion user, it's pretty obvious what the effects are: ie. particle emitter, orbit around object, zooms, replicator, etc ...
    The video is called "The Future is China". Made for an online video contest with a "future" theme. The video is a spoof, so please don't take it too seriously (the US-China relations issue can be a fairly hot issue, I know). Anyway, here it is:
    http://one.revver.com/watch/133243
    I'd say I'm still in the latter stages of being a novice at this sort of thing, so I will be receptive to tips if you have any.

    I haven't seen many people post videos that they've
    made in this forum, so I hope it's not too
    self-promotional to do so. I regularly check the iWeb
    forums, and over there people regularly post samples
    of their work, which I think is good, cause I can get
    some ideas from this.
    Well, I made this video entirely using Motion, so I
    thought people here might be interested. If you're a
    Motion user, it's pretty obvious what the effects
    are: ie. particle emitter, orbit around object,
    zooms, replicator, etc ...
    The video is called "The Future is China". Made for
    an online video contest with a "future" theme. The
    video is a spoof, so please don't take it too
    seriously (the US-China relations issue can be a
    fairly hot issue, I know). Anyway, here it is:
    http://one.revver.com/watch/133243
    I'd say I'm still in the latter stages of being a
    novice at this sort of thing, so I will be receptive
    to tips if you have any.
    You forgot the part where the poor masses rise up against the tyrrany of the elite and the polloution caused by unregulated industrilization causes mass birth defects, and cancer. Other than that nice work....

  • Getting video start from 0.00 position issue

    hi folks,
    i am having this 80gb ipod and offlate whats bugging me is that eg. i got a song which is 5 mins and yesterday i abruptly stopped at say 3.47 mins, when i try to watch that video again, it starts from 3.47 instance... is there any kind of setting wherein the video starts from 0.00 position... i tried in options / settings etc..but couldnt find any option... has anyone else too find this difficulty ?

    hi folks,
    i am having this 80gb ipod and offlate whats bugging me is that eg. i got a song which is 5 mins and yesterday i abruptly stopped at say 3.47 mins, when i try to watch that video again, it starts from 3.47 instance... is there any kind of setting wherein the video starts from 0.00 position... i tried in options / settings etc..but couldnt find any option... has anyone else too find this difficulty ?

Maybe you are looking for