Delay when sharing desktop

Recently upgraded from 6 to 7 and now users are reporting that when sharing desktops there is a massive delay. Also recorded presentations frequently lock up or stutter and then restart from the beginning whereas in the past they were fine.
Any thoughts on this would be appreciated. Thanks

When others control your desktop, it is unavoidable to see the flashing mouse pointer.
If you just want to share specific programs, you can choose share program only.
Lisa Zheng
TechNet Community Support

Similar Messages

T440P [20AN] - Lync 2013 Crashing When Sharing Desktop - Intel Driver

Hello,
After updating to the latest video drivers from the ThinkVantage Update Retriever, our Lync clients crash when sharing desktop on our T440P series and X240 series. I noticed when I uninstall the video driver I am able to screen share without incident. Also, if I update the driver from Windows Update I am able to share successfully. We use the update retriever and thininstaller to install our drivers in our environment. I have tried uninstalling the Lync updates all the way down to the base version and experience the same issue at every level. It crashes 100% of the time when sharing desktop. I have tested it on T440p machines in our environment that do not have the latest display driver, and no crashes occurred. Here are the specifics:
Thinkpad X240 [20AL]
Thinkpad T440p [20AN]
ThinkVantage Update Retriever 5.00.0007
Thinkvantage Thin Installer 1.2.0010
Intel HD Graphics Driver - gid634ww (10.18.10.3412)
Microsoft Lync 2013 SP1 32 Bit (15.0.4569.1503)
Error Message from Application Log:
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0af33
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x00000879
Fault offset: 0x0000c42d
Faulting process id: 0x220c
Faulting application start time: 0x01cf707ca316ae96
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Faulting module path: C:\WINDOWS\syswow64\KERNELBASE.dll
Report Id: 9bb7c6e4-dc70-11e3-b695-5c514fb23d46
Any help or insight is greatly appreciated.
Thank you,
John
Solved!
Go to Solution.

Just as an updated to this:
I'm still waiting on updated drivers to fix the issue, however, there is a workaround. If you disable Desktop Composition screen sharing will work.
Control Panel -> Performance and Information Tools -> Adjust Visual Effects -> Uncheck “Enable desktop composition
John

Flashing Mouse pointer when sharing desktop

I have a problem when sharing my desktop - The Flashing Mouse pointer makes me ill. It's like a seizure-inducing strobe and gives me instant nausea.
I read that this flashing is by design. If this is the case, can anyone suggest a workaround or an alternative version of Lync/OCS since I need to share my desktop as part of my job so this is a real problem for me.
Thanks
Tom

When others control your desktop, it is unavoidable to see the flashing mouse pointer.
If you just want to share specific programs, you can choose share program only.
Lisa Zheng
TechNet Community Support

Connect crashes when sharing desktop Mac

User on a Mac with latest Connect Add In which crashes when attempting to share the Desktop..
Any ideas???

I have the same problem:
Signature du problème :
Nom d’événement de problème: APPCRASH
Nom de l’application: lync.exe
Version de l’application: 15.0.4675.1000
Horodatage de l’application: 54629b81
Nom du module par défaut: ntdll.dll
Version du module par défaut: 6.1.7601.18247
Horodateur du module par défaut: 521ea8e7
Code de l’exception: c0000005
Décalage de l’erreur: 0004378b
Version du système: 6.1.7601.2.1.0.256.1
Identificateur de paramètres régionaux:
1036
Informations supplémentaires sur le problème :
LCID: 1033
Lire notre déclaration de confidentialité en ligne :
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x040c
Si la déclaration de confidentialité en ligne n’est pas disponible, lisez la version hors connexion :
C:\Windows\system32\fr-FR\erofflps.txt
Could anybody help? When I intend to share screens or receive a file or send one with Lync, the App crashes...
anybody in Microsoft who could help? Thks.
Pedro

HT6114 Delaying problem when switching desktop

After upgrading to Mavericks v10.9.2 Update my "Macbook pro Retina, 15-inch, Early 2013" is delaying when switching desktops or switching to mission control. An overall delay problems occured. I need help!

First off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark

Delay when using BC partition in VMware Fusion

Hi everyone,
I've been wondering about this for months now and finally decided to ask for your experiences.
When using my Windows (XP Pro 32bit) Boot Camp partition as a VM in Fusion I always get a delay when the desktop appears and the taskbar items are loading. I can see that the VM Tools seem to be loading (taskbar icon) while this is happening. This usually takes at least 10-15 seconds on my MBP (C2D with 4 GB RAM) and it has been the same for the last few versions of OS X and Fusion.
Is this delay normal when using the BC partition? It definitely isn't there when booting a regular VM. If so, how long does it take for you?
Thanks!
Björn

Nope, KBDMGR.EXE is located in "Program Files" and autostarted via the RUN registry-entry. It's seemingly not even a real driver, but merely a bridging process that administers the drivers.
If you run bootcamped Windows without KBDMGR you cannot use the special function keys (brightness, loudness etc) and at least in Vista you have to do some manual settings every time you start Windows in order make tap-to-click usable without KBDMGR (a better and easier way is to start KBDMGR once and then stop it again if you don't want/need it).
Manually enabling tap-to-click and chosing the Boot-OS is possible without KBDMGR being loaded even once, you can just call the settings application from Windows/System32. The Readme coming with my Script explains how to find that and possibly use a keyboard- or icon-shortcut for that.
Theoretically it can be stopped/killed via Process-Manager and started manually by just calling the exe file. Practically that only works as long as the RUN entry in the registry remains intact and points to an existing file.
Along other things my script explains how to replace KBDMGR.EXE with a dummy file which in turn allows to start Windows without it and later loading it manually if needed (preferably via a keyboard- or icon-shortcut as described in the Readme of my script).
Personally I use Right-ALT+, for opening the Settings and Right-ALT+. for switching KBDMGR on/off (along with switching the F-Keys from Standard to Special functions alongways). Works like a charm.
Message was edited by: T1mur
Message was edited by: T1mur

Weird delay reading shared variables

Hello,
I'm working on a project were I'm monitoring some prodution lines. I'm using DSC module's OPC server to connect to PLCs on the production line and I've created bound variables on my labview project of the PLC's tags.
On my project I have one main VI were I show information about the production lines and were I can access several subVIs were I show other information about those lines. Then I have a VI that is running in background were I'm reading about 50 shared variables from the PLC and where I'm registering some data in a MySQL database, datalogging data on the Citadel database and registering alarms.
The problem I'm having is that on the VI that runs in background I noticed a delay reading the variables that are reading containers weights from the production line. It seems that all the other shared variables don't suffer any delay, only the weight variables start having some delay when the values are increasing. It also seems like that, when I'm only running that VI alone, without running the main VI, there isn't any kind of delay. I'm reading the shared variables as shared variable nodes.
Can anybody help me understand what's happening and how can I fix this delay? The VI that runs in background is time critical and a weird delay like that messes up my data.
Solved!
Go to Solution.

Hi Mateus23,
The shared variable has various buffering capabilites, including integration with the Real-Time FIFO feature in LabVIEW Real-Time.
I guess that the buffering settings are causing the unexpected behavior.
Check these resources:
Buffered Network-Published Shared Variables (whitepaper)
Shared Variables Properties Dialog
- Network Page
- Real-Time FIFO Page
~~

Icloud control panel on a shared desktop

I cannot log in to icloud control panel on my shared desktop. Is there a trick when I install it?

Do you have an iCloud account (you would have made it on a Mac or an iPhone/iPad) it could not have been made on a PC.

Why is audio truncated when "shared"

I have an hour of keynote presentations that have correctly working audio. (Recorded and dragged and dropped to individual slides.)
One short presentation (2 min) works perfectly when played in Keynote, but invariably truncates when shared to either iTunes or iWeb. (please see link)
http://www.brentcbrolin.com/BrentCBrolin/TestPodcast/TestPodcast.html
This has a video podcast and a Keynote download link. The audio works on the latter; not on the former.
I have tried various kinds of transition changes, but nothing helps. And, besides, the existing transitions DO WORK IN KEYNOTE playback and when KN file is shared (and downloaded).
Any suggestions appreciated. Thanks.

This is awkward, but it did solve the problem.
Goal: To have the same picture (call it A) continue on screen as the show goes from slide 1 to slide 2. That is, to not have A “blink” when the slides change between 1 & 2.
(N.B. All slides have MP3 narrations; these were recorded in audio program and dropped onto each slide.
Problem: As long as I did not give picture A an EXIT transition, the audio on slide 1 was truncated when I “shared” the slide show to iTunes or iWeb.
I had thought I could just have NO EXIT transition for A on slide 1, and have no entry transition for A on slide 2 (which would avoid the “blink” between 1 & 2.
And when I previewed it in Keynote, THE AUDIO WORKED PERFECTLY, even when picture A on slide 1 had NO EXIT transition.
However, the truncation of audio on slide 1 did occur whenever I shared the same show to iTunes or iWeb (.mov).
I tried many variations including:
a “stop audio” transition with a lot of extra time at end of slide 1;
delaying the “start transition” in the “slide” window of inspector of slide 1;
...but all resulted in truncated audio on slide 1, as long as picture A DID NOT HAVE AN EXIT TRANSITION.
However, if I did give picture A an EXIT transition on slide 1, the audio was not truncated (but, of course, I had a “blink” between slide 1 and 2).
Solution:
Hide a rectangle (or any graphic) behind picture A on slide 1.
Give that blind rectangle an EXIT transition…
…but don’t give picture A an exit transition.
This fools Keynote: it segues from slide 1 to 2 without a “blink,” and the audio narration is not truncated.
But it took a day to figure it out. (I removed the link to the examples mentioned in first post.)

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

Error -50 when sharing a project

I get this error message when sharing my iMovie project:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured (-50)
I've tried saving to a different location on my HD, I've tried reducing the res (I tried the three highest res as this is for a tv monitor) of the exported movie, I've repaired permissions. I exported this projecet perfectly the first time I made it - I need to change one thing in it and now get this!
I'm using the friendship movie trailer theme on iMovie 11 (9.0.4), OSX 10.6.8 on a MacPro 2.66ghz Quad-Core Intel Xeon with 16gb RAM and 3x1.5tb internals

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Outlook 2007 denied calendar access when shared by other outlook 2007 users....

i have exchange 2010 with latest sp. we use outlook 2013/2010/2007 on windows os's vista through 8.1. Calendar sharing via setting explicit permissions in outlook 2010/2013 works fine. in outlook, select calendars, right click calendar, set explicit permissions
for user you want to share calendar with to Free/busy/subject/location. works ok for 2010 and 2013. However Outlook 2007 client does same and the other outlook 2007 intended recipient gets "you dont have permission to access xxxx calendar. DO you want
to send a request?" WHen you send a request you are automatically granted "Reviewer" permission to the mailbox. Our staff dont want to give that much detail. Is this a bug or config error? I expected to set the permissions on a users calendar
to a mailgroup and share it using the free/busy/subject/location permission set. SO i was surprised to see this didn't work and generated the permission error + request permission email. any ideas would be appreciated.
The main reason to share this way is to avoid giving reviewer permission to everyone you share with.
Also please note that an Outlook 2013 user who uses the method above to set permissions for groups will have other outlook 2013 users view his calendar based on the permissions set. Outlook 2007 clients still get permission denied...do you want to request
permission...
After more testing I found that upgrading to outlook 2010 seems to work. I would prefer to avoid the cost of the upgrade if possible however it seems that Outlook 2010 works correctly and Outlook 2007 does not.

Hi,
My understanding is that no matter the calendar owner shares the calendar via Outlook 2013 or Outlook 2007, the Outlook 2007 recipient can't open the calendar and receive the message to send a request, am I correct? If yes, please let me explain.
In short, it is by design in Outlook 2007. In Outlook 2007 with Exchange 2007(and later), the "Free/Busy time" and "Free/Busy time, subject, location" permissions only apply when checking the user's free/busy information (for example,
when looking in the Scheduling tab of a meeting request) and not when looking in another user's Calendar folder.
To workaround this issue, when sharing the calendar in Outlook, please add "Folder visible". Thus the Outlook 2007 recipients should be able to open the shared calendar.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

this is a perfect question to ask the users in the FCP X forum. Good luck. https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Image size when sharing portrait orientation in CC

Is there any way to over ride the behavior of CC when sharing images with a portrait orientation? By default it fits the image to the height of the browser window, even when it's expanded to full page. The result is a REDUCTION in image size if you want to share an image that is taller than it is wide.

Usually Images display "fit to screen" by default in my browser. If I click on an over-sized image, it goes to actual size.
There I can scroll around. So I'm guessing you want a 100% or "fit width" default?
Anyway it is the Image > Image Size command that resizes or changes pixel dimensions in Photoshop.
If you send your images to other users, they can zoom in and out to view no matter the size.
Gene

Delay when sharing desktop

Similar Messages

Maybe you are looking for