Delay when using doubletap and hold with bootcamp 5

Hi,
I just bought a 15" MBPro and discoverd a delay when I use doubletap and hold to scroll or to mark text or drag. Is this a know problem of the bootcamp trackpad driver?
Hoping for answers
Bye
Michael

I have the same problem, except that I'm using the Apple Trackpad in Windows 8 in Boot Camp on a 2012 iMac, so my guess is that the driver is to blame.

Similar Messages

Loop delay when using two VI's with picture controls simultaneously

Hey all,
I have observed an odd behavior and I'm not quite sure why it happens. I have two VI's that are mapping GPS coordinates onto XY graphs that are displayed on top of picture controls. When the maps from both of the VI's are visible on screen the loops get delayed by as much as a second, but if you just cover the map portion with another window they go back to looping at twice a second as they should. It took me a little while to figure this part out, let me tell you. There are no computing limitations that should be affecting it since my CPU is only at 10-12% and have 4GB of RAM available. I checked the GPU too just in case and it was sitting at 3% usage, so no hold up there. Anyone have any experience with something like this happening to them? It has me stumped.
I though it might have to do with how LabVIEW handled them, so I went ahead and made them into EXE's and tried it out with the same results.
Thanks in advance for any help or suggestions,
dnorman

dnorman wrote:
Is it possible to run the redraw of the picture tiles in parallel, on multiple cores, if they are going into the same control?
I doubt it. Even if the picture control wasn't pretty old (and it is), I don't know of any mechanism which will give you this level of control.
Here are potential options. I have no idea if they will help:
Instead of building separate commands, process the data in such a way that you have a single raster image (i.e. a 2D array) to place into the control. I believe this should be faster.
Use another type of display (such as a .NET indicator).
Instead of using the XY graph, overlay the data directly onto the image (there should be some graph VIs in the picture palette which might help).
Try defering panel updates before updating all the controls and undefering after. I don't think this will help, but it's probably the easiest change to make.
Try to take over the world!

AuthenticationFailedException when using JNDI and JavaMail with SMTP auth

Hi all - I've been banging my head on this one for awhile now - hopefully someone else has done this.
We are working in a servlet container (tomcat), and need obtain a mail session from JNDI. We do this as follows:
               Context initCtx = new InitialContext();
               Context envCtx = (Context) initCtx.lookup("java:comp/env");
               Session mailSession=(Session) envCtx.lookup("mailSession/trumpetinc");so far so good. The jndi entry for the mail session is configured in server.xml as follows:
          <Resource name="mailSession/trumpetinc" scope="Shareable" type="javax.mail.Session"/>
          <ResourceParams name="mailSession/trumpetinc">
            <parameter>
              <name>mail.smtp.host</name>
              <value>mail.server.com</value>
            </parameter>
            <parameter>
              <name>mail.smtp.password</name>
              <value>ABCDEFG</value>
            </parameter>
            <parameter>
              <name>mail.smtp.user</name>
              <value>trumpet_kevin</value>
            </parameter>
         <parameter>
           <name>mail.smtp.auth</name>
           <value>true</value>
         </parameter>
          </ResourceParams>With the above, whenever we hit Transport.send(msg), we got an AuthenticationFailedException thrown. I have run into this before with SMTP authentication, so I decided to try using the transport.sendMessage() method instead.
So, I get the transport:
Transport trans = mailSession.getTransport("smtp");
trans.connect();Then I send my message using:
msg.saveChanges();
trans.sendMessage(msg, msg.getAllRecipients());and finally, I close the transport:
trans.close();Unfortunately, I'm still getting the exception. Is it possible that my connect() method is not picking up the JNDI properties set in the server.xml file (this seems likely)? If so, what's the best way for me to get those properties so I can set them explicitly in the connect() method?
Thanks in advance,
- Kevin

Hi,
I have faced the same problem and after some googling and trying I have discovered what causes the AuthenticationFailedException exception. I just wanted to share the knowedge maybe it will be helpfull to others.
Here it is what the API says:
To use SMTP authentication you'll need to set the mail.smtp.auth property (see below) and provide the SMTP Transport with a username and password when connecting to the SMTP server. You can do this using one of the following approaches:
1.Provide an Authenticator object when creating your mail Session and provide the username and password information during the Authenticator callback.
Note that the mail.smtp.user property can be set to provide a default username for the callback, but the password will still need to be supplied explicitly.
This approach allows you to use the static Transport send method to send messages.
2.Call the Transport connect method explicitly with username and password arguments.
This approach requires you to explicitly manage a Transport object and use the Transport sendMessage method to send the message. The transport.java demo program demonstrates how to manage a Transport object. The following is roughly equivalent to the static Transport send method, but supplies the needed username and password:
Using the Transport.connect makes the JNDI not very helpfull for configuration.
It seems that using just the mail.smtp.user and mail.smtp.pass is not sufficient for the authentication.
so, the solution is :
just place these to lines in the JNDI configuration:
          username="test"
          password="test1"
so it should looks as follows:
          <Resource name="mail/Session" auth="Container"
          type="javax.mail.Session"
          username="test"
          password="test1"
          mail.transport.protocol="smtp"
          mail.smtp.auth="true"
          mail.smtp.host="localhost"
          mail.smtp.port="25"
          mail.smtp.user="test"
          mail.smtp.password="test1"
/>
where test and test1 are the user's credentials
Regards,
Kiril
Message was edited by:
Kireto
Message was edited by:
Kireto

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

When using google and you do a new search it goes back to previous search only happens with fireox

when using google and you do a new search it goes back to previous search only happens with fireox

Try to connect to iTunes during the setup.

The utility's menu isn't coming up when I press and hold r and command after restarting

I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.

Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

How do I close a JInternalFrame when using subclasses and a separate cla...

The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
class Superclass extends JFrame
     JButton b= new JButton("ok");
     Superclass()
class Subclass1 extends Superclass
     Subclass1 ()
          add(ok);
       ok.addActionListener(new Listener());
class Subclass2 extends Superclass
     Subclass2 ()
          add(ok);
       ok.addActionListener(new Listener());
class Listener extends Superclass implements ActionListener
     public void actionPerformed(ActionEvent e)
               dispose();
}How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
JComponent component = (JComponent)event.getSource();
JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
frame.dispose();
Ok, I will make a try:
public static Container getAncestorOfClass(Class c, Component comp)
w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
"getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
"w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
"this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
When I thought you wanted to close an internal frame then the code would have been something like:
JComponent component = (JComponent)event.getSource();
Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
JInternalFrame internalFrame = (JInternalFrame)container;
internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
http://homepage1.nifty.com/algafield/sscce.html

When using facetime having difficulty with video, sound is ok.screen says reconnecting.

When using facetime having difficulty with video.msound is ok. Screen says reconnecting

There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120

LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program

Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
Matthias

Hello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments

Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app?

Hi All,
Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app
Right now, I am using this below mentioned event
Window.Current.VisibilityChanged +=
CurrentWindow_VisibilityChanged;, but it fires even when app relaunches.
Please anybody help me to solve this issue.

Thanks for your early reply. but, those are system triggers used in background task. I want an event that fires when screen gets locked. like this...(a networkstatuschangedevent)
NetworkStatusChangedEventHandler
networkStatusCallback =
newNetworkStatusChangedEventHandler(OnNetworkStatusChange);

TS3742 I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto.

I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto. I have to power off my system to get it running again. Any suggestions on what I can do to address this situation.

I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps

Building executables when using LV and MATRIXx

Hi!
With respect to Building executables when using LV and MATRIXx, I need clarification on following:
1) Pre-requisites to use MATRIXx? We have LV 7.1 FDS with application builder.
2) Licensing scheme? We would like to have MATRIX on 3 development stations.
3) Can we build stand alone executables when using MATRIXx with LV?
4) Do we need to purchase any addon to achieve (3) ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
Before I answer your questions, I am curious to know what you have in mind for the stand alone executables you are interested in building. It may help me to know a little more detail about your plans. Depending on your application, some of these answers may or may not be applicable. In any case, here are answers to your questions:
1) There are no prerequisites for using MATRIXx. LabVIEW is not required. However, with LabVIEW FDS, you do have an Xmath Script node located in the Functions > All Functions > Analyze > Mathematics > Formula palette. This node can be used to call Xmath scripts from LabVIEW.
Note: To use the Xmath Script node successfully, you will want to install LabVIEW 7.1.1 Maintenance Release. Refer to KnowledgeBase 300A6NDT: How Can I Resolve MATLAB and Xmath Script Node Issues in LabVIEW?
2) There are two licensing options for MATRIXx: node-locked and floating (concurrent). A node-locked license is restricted to a specific node and can be installed and used on that single computer. A floating (concurrent) license allows use of the product by a specified number of concurrent users on any computer on a local area network that includes a server running a single license manager. For more information, follow the link to the MATRIXx Price List from Products and Services: MATRIXx.
3) There are two ways you might build executables when using MATRIXx and LabVIEW. One way uses a component of MATRIXx to automatically generate C code. AutoCode is a component of MATRIXx that allows the user to turn system models into C code. This C code can then be compiled into an EXE or DLL. If built into a DLL, LabVIEW can be used to call the DLL. A more thorough explanation of this is provided in Developer Zone Tutorial: Running MATRIXx SystemBuild Models in LabVIEW/LabVIEW Real-Time.
Another way that may work is to build an executable from a LabVIEW VI that uses an Xmath Script Node. Any target machine running this executable would need to have Xmath and the LabVIEW Run-Time Engine installed.
4) No other add-ons are needed for (3). Do be sure to refer to the note following the answer to (1).
Regards,
Eric M.

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

[svn:fx-4.x] 15119: Menu. popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction =rtl.

Revision: 15119
Revision: 15119
Author:   [email protected]
Date:     2010-03-29 13:49:52 -0700 (Mon, 29 Mar 2010)
Log Message:
Menu.popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction=rtl. Also made same change for AccordionHeader, CheckBox and RadioButton just to be safe.
QE notes:
Doc notes: None
Bugs: SDK-26028
Reviewed By: Kevin
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26028
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/framework/defaults.css

Thank you so much wchp, this is brilliant. I have had this annoying problem for a long time. I eventually rang Mac support, they did not know how to fix the problem as you have suggested so they instigated many hardware replacements which eventually left my iMac severely crippled. They eventually replaced it with the latest model. But I spent two months working with a disabled computer which really interfere with my work.
Your solution appears to have solved my problem, at least so far, but I am hopeful that it is a permanent fix. I hope that your suggestions are taken up by Apple support. This may solve many users problems and avoid Apple making expensive fixes that don't actually work.
I thought that the new iMac would not have the 'Wake up from sleep by painting in the login window' problem but it did, this really annoyed me. Anyway now the problem appears to be solved, it's not I will repost and keep working on it. Thanks again.

Delay when using doubletap and hold with bootcamp 5

Similar Messages

Maybe you are looking for