Delayed attachments with Exchange 2010 SP1

Hi folks,
we have a big issue here with Apple Mail in 10.6.8, 10.7.4 and 10.8.0, but particularly in 10.6.8.
When someone receives an e-mail with an attachment, it may be, that the attachment is delayed up to 5 hours. But in the Outlook Web Access, in Outlook 2011 for Mac and on iOS it appears immediately.
The exchange server is a 2010 SP 1 RU5.
Does any one have an idea on this?
Thanks a lot,
yaench

Hi,
Please refer to this link for exchange integration with Lync 2010
http://blog.schertz.name/2010/11/lync-and-exchange-im-integration/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Similar Messages

Exchange 2010 SP1 install fails with -1603 error

I am getting a -1603 error when installing Exchange 2010 SP1. Installation fails when copying files/removing old version with the following error:
[10/01/2010 23:17:06.0823] [2] Beginning processing uninstall-MsiPackage -ProductCode:'6574fdc2-40fc-405a-9554-22d1ce15686b' -LogFile:'C:\ExchangeSetupLogs\InstallSearch.msilog'
[10/01/2010 23:17:06.0847] [2] Removing MSI package with code '6574fdc2-40fc-405a-9554-22d1ce15686b'.
[10/01/2010 23:17:09.0400] [2] [ERROR] Unexpected Error
[10/01/2010 23:17:09.0401] [2] [ERROR] Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
[10/01/2010 23:17:09.0401] [2] [ERROR] Fatal error during installation
[10/01/2010 23:17:09.0409] [2] Ending processing uninstall-MsiPackage
[10/01/2010 23:17:09.0411] [1] The following 1 error(s) occurred during task execution:
[10/01/2010 23:17:09.0412] [1] 0. ErrorRecord: Couldn't remove product with code 6574fdc2-40fc-405a-9554-22d1ce15686b. Fatal error during installation. Error code is 1603.
Does anyone know how to resolve this?
Thanks,
greg

Hi Frank,
I've the same problem when I try to install the SP2.
When I try to install RU 4v2, 5 or 6, then comes error 2771. So I waiting for SP2 in the hope, a full install of the SP will fix this.
But the setup broke with the following entries:
[12.07.2011 19:51:59.0379] [0] Setup will run the task 'uninstall-msipackage'
[12.07.2011 19:51:59.0379] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU''
[12.07.2011 19:51:59.0379] [1] Die Active Directory-Sitzungseinstellungen für 'Uninstall-MsiPackage' lauten: Vollständige Gesamtstruktur anzeigen: 'True', Konfigurationsdomänencontroller: 'LicPDC.kh-lichtenstein.local', Bevorzugter globaler Katalog:
'LicPDC.kh-lichtenstein.local', Bevorzugte Domänencontroller: '{ LicPDC.kh-lichtenstein.local }'
[12.07.2011 19:51:59.0379] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=DEU'
[12.07.2011 19:51:59.0410] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[12.07.2011 19:52:04.0551] [1] [ERROR] Unexpected Error
[12.07.2011 19:52:04.0551] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Schwerwiegender Fehler bei der Installation. Error code is 1603.
[12.07.2011 19:52:04.0551] [1] [ERROR] Schwerwiegender Fehler bei der Installation
[12.07.2011 19:52:04.0613] [1] Ending processing uninstall-msipackage
The MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1' ist the SP1.
Actual System: Server2008R2SP1 / Exchange2010SP1 RU3v3
It is possible to solve this problem?
Rene Hubert - Systemadministrator - DRK KH Lichtenstein gGmbH
I too have this
problem.

Edge 2013 sp1 with exchange 2010 organisation.

Dear reader,
I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
2013 SP1.

Upgrade From Exchange 2010 SP1 to SP3 - Schema Upgrade Question

Hello,
We're currently running Exchange 2010 SP1 in our environment and want to upgrade to SP3. I just had a couple of questions related to preparing AD for this new SP that I was hoping that someone could answer.
Setup
We have a single forest with two domains within it (A and B for example). The schema master is in Domain A but this domain doesn't contain any Exchange 2010 servers. Domain B contains our 2010 CAS and Mailbox servers.
Both domains have Windows 2003 SP2 domain controllers.
I understand that before I proceed with the upgrade to SP3, I first need to update the AD schema on our schema master. I was planning on doing the following :
Log onto an existing Windows 2008 R2 64 bit "member" server in domain A (containing the schema master) with an account which is a member of the Schema Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareAD.
Do I need to also run SETUP.EXE /PrepareDomain on domain A as well or does the /PrepareAD sort this out ?
I was then going to turn my attention to domain B (which contains the 2010 CAS and Mailbox servers) and do the following :
Log onto an existing Windows 2008 R2 64 bit 2010 Mailbox server with an account which is a member of the Domain Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareDomain
Is this the correct procedure to follow ? I assume that I can then go ahead and start to upgrade the Exchange 2010 SP1 servers in the following sequence :
CAS\HUB Server(s)
Mailbox Server(s).
Clarification on the AD upgrade steps would be appreciated.
Thanks
Mark

This has all the info you need:
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
and
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
Note: There is no harm in simply running setup/PrepareAllDomains.
You should break out each Prep step since you have multiple domains:
setup/PrepareSchema
setup /PrepareAD
setup /PrepareAllDomains
you can run all of these from the same DC you run the setup/PrepareSchema step!
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

Hi there,
I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
Our current Exchange environment consists of the following:
1 x CAS/HT Server
2 x Mailbox Server (members of a DAG)
The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
The Execution Policies on our Exchange servers are set as follows:
– CAS/HT Server:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine Unrestricted
– Mailbox Servers:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine RemoteSigned
Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
I would be very grateful if you (or any of the kind readers) could help me with following questions:
1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
ii. Install SP3 followed by RU 5 on the first mailbox server
iii. Install SP3 followed by RU 5 on the second mailbox server
Many thanks,
M

Hi Amit,
Many thanks for the swift reply.
That's correct. We didn't set the Powershell execution policy via Group Policy. We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
The mailbox servers' execution policies have not been changed and are set to those values by default.
I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

Three way switch compaitable with labview 2010 SP1

Hi,
I am in need of three way switch which is compaitable with labview 2010 SP1.
Plz help me ..
thanks
mahadev

can u help me to upconvert the vi to LV2010. which manual are u talking abt?
Attachments:
3 position.llb ‏46 KB
3switch.ctl ‏8 KB
3switch.vi ‏16 KB

Unity 5.0 compatibility with Exchange 2010 SP2?

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

SME 7.1 not working with Exchange 2013 SP1 CU6

Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?

We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan

Exchange 2010 SP1 management console fail

Exchange 2010 SP1 management console fail on local exchange servers.
The following error occurred while attempting to connect to the specified Exchange server CAS123.domain.co.za
The attempt to connect to
http://cas123.domain.co.za/PowerShell using “kerberos” authentication failed: Connecting to remote server failed with following error message: The WS-Management service cannot process the request because IP address cas123.domain.co.za is invalid. For more
information, see the about_Remote_Troubleshooting Help topic.
However do note that the Exchange Management Shell also fails with the exact same error on both my CAS and Mailbox servers.
Though I am still able to open both tools via my backup server.
All ells works fine.
nslookup resolves the exchange servers as they should be. Frankly I am stumped as to the invalid IP address.
My exchange environment have been running problem free for years and this problem only occurred last week Thursday after some .NET updates.

Hi,
As per the information and details provided by you, the only thing that I can figure out is that: -
You receive an error: Exchange 2010 SP1 management console fail.
There are two methods to resolve this problem: -
Method 1: -
Close all MMC/EMC instances before proceeding.
Open the Registry editor (regedit) as the user you run the EMC under.
Go to
HKEY_CURRENT_USER\SOFTWARE\Microsoft\ExchangeServer\v14\AdminTools
Look for value, Node structure setting.
If it is there, back it up and then remove it.
Method 2: -
Close all MMC/EMC instance before proceeding.
Open powershell or powershell IDE as the user you run the EMC under and execute the following command:
Remove-Item Property- Path
HKCU:\Software\Microsoft\ExchangeServer\v14\AdminTools\ -Name NodeStructureSettings
Close Powershell
I hope this information will be helpful for you. Correct me if the information that I am having is wrong.
Thanks and regards
Ashish@V

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Owa working but outlook cant connecting to the new mailbox in Hosted exchange 2010 SP1

hi i recently join one organization they having Hosted Exchange 2010 Sp1 i created one new organization Unit and created
new MailBox but didnt give any permissions so when i try to connect to OWA then i log in and send and recive e-mails but when i try to connect to Outlook it say the name not found ...........
please help me

Hi sorry for so late respons i was on leaves .
new User not connected automatically getting the message "user name Not found " also when i try to connect manually the error message " there is problem with the security certificate. the name on the security certificate is invalid or does not match ..." also
Outlook some problem with some old Mailboxes
from Exerca i get the following errors i.e Certificate related
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected].
Autodiscover was tested successfully.
Additional Details
Elapsed Time: 2927 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service was tested successfully.
Attempting to test potential Autodiscover URL https://xyz.co.uk/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 417 ms.
Test Steps
Attempting to resolve the host name xyz.co.uk in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host xyz.co.uk to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server xyz.co.uk on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Attempting to test potential Autodiscover URL https://autodiscover.xyz.co.uk/AutoDiscover/AutoDiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Test Steps
Attempting to resolve the host name autodiscover.xyz.co.uk in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host autodiscover.xyz.co.uk to ensure it's listening and open.
The port was opened successfully.
Additional Details
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 270 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.xyz.co.uk on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Validating the certificate name.
Certificate name validation failed.
Tell me more about this issue and how to resolve it
Additional Details
Attempting to contact the Autodiscover service using the HTTP redirect method.
The Autodiscover service was successfully contacted using the HTTP redirect method.
.......................... Please help me how to resolve

Exchange 2010 SP1 - Export to PST, Remove Mailbox

I'm looking for a PowerShell script that will allow me to use Exchange 2010 SP1 to export a mailbox to PST and then when finished, delete the user and mailbox. I typically do this process manually about 6 months after an employee leaves the company (allowing
for live access to the mailbox and message forwarding to their supervisor).
Ideally, the script would take input for a mailbox ID, and then export the file to a file of the mailbox name (Prompt: jdoe -> New-MailboxExportRequest -Mailbox jdoe -FilePath \\server\path\jdoe.pst). After the export is complete, it would schedule the
mailbox for complete removal and remove the completed mailbox export request. The prompt and export process should be simple enough, but I suspect the difficulty will come with monitoring for the completed request before acting on the removal.
Thanks for any help provided! :)

Thanks for the guidance!
I think I was able to come up with something that will do the trick nicely:
$Name = Read-Host "Please enter a mailbox to archive"
New-MailboxExportRequest -Mailbox $Name -FilePath \\Exchange\C$\ExchangeExports\$Name.pst
while ((Get-MailboxExportRequest -Mailbox $Name | Where {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"}))
sleep 60
Get-MailboxExportRequest -Mailbox $Name | Remove-MailboxExportRequest -Confirm:$false
Remove-Mailbox -Identity $Name -Confirm:$false
Hopefully it may help others.

Droid frg22d update stops syncing with exchange 2010

We have exchange 2010 SP1 running. When some of the droid users received the 2.2 software build FRG22D it stops syncing with exchange. I have build FRG01B and it works fine, I hope they don't push FRG22D to my phone. HAs anyone else had this issue? Has Verizon recognized this issue. It is going to be major as more phones upgrade and run on Exchange 2010 SP1.

I did a hard reset and that didn't fix my issue so i wouldn't suggest doing a hard reset.
My environment:
Exchange 2010 SP1
Droid with FRG22D
I haven't been able to pinpoint the issue but it has to do with the request and response with provisioning between the devices and exchange. Nothing has changed but updating the phone to the latest patch.
I receive the following error:
RequestBody :
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<SyncKey>0</SyncKey>
</FolderSync>
AccessState :
Blocked
AccessStateReason :
Policy
ResponseHeader :
HTTP/1.1 449 Retry after sending a PROVISION command
MS-Server-ActiveSync: 14.1
ResponseBody :
[No XmlResponse]

ICal stops syncing with Exchange 2010

I have a few users with Macbooks, syncing iCal with the company server Exchange 2010. All of them work fine apart from one... I can setup the Exchange account as normal, and all events are correctly synced. After a few days, iCal stops syncing and I got a message "Go offline, revert to server, try again". At this point, the only workaround is to delete the account, and recreate it with the same settings... Then iCal works fine for a few days and again.
This server is working fine with iPhones, Android, Outlook 2011 (Mac), Outlook 2010 (Windows)...
Anyone facing the same issue ? Any idea ?

I did a hard reset and that didn't fix my issue so i wouldn't suggest doing a hard reset.
My environment:
Exchange 2010 SP1
Droid with FRG22D
I haven't been able to pinpoint the issue but it has to do with the request and response with provisioning between the devices and exchange. Nothing has changed but updating the phone to the latest patch.
I receive the following error:
RequestBody :
<?xml version="1.0" encoding="utf-8" ?>
<FolderSync xmlns="FolderHierarchy:">
<SyncKey>0</SyncKey>
</FolderSync>
AccessState :
Blocked
AccessStateReason :
Policy
ResponseHeader :
HTTP/1.1 449 Retry after sending a PROVISION command
MS-Server-ActiveSync: 14.1
ResponseBody :
[No XmlResponse]

Delete emails from a specific folder in Exchange 2010 SP1

Hi all,
Since Exchange 2010 SP1 does not have “-DeleteContent” parameter in mailboxexportrequest any more, how do we delete emails from a specific folder of a user mailbox? (Personal folder, not default folders).
Please note that the ASQ for searchquery in Search-Mailbox does not support “folder”.
If going for retention policy, is there a way to tag a retention policy to a specific folder of a user mailbox without user attention?
William Yang
William Yang

Hi William,
Yes, you may not run the Search-Mailbox to delete items in specific folder at the moment. Hope it will be back soon.
You can create a Personal tag, users can apply personal tags to folders they create. But users have to select related Retention Policy using Outlook or OWA manually.
For more information, please see:
Understanding Retention Tags and Retention Policies
http://technet.microsoft.com/en-us/library/dd297955.aspx
Frank Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Delayed attachments with Exchange 2010 SP1

Similar Messages

Maybe you are looking for