Delayed autio start/sart stop w/ SRSS 4.2 + SRWC 2.2 + Flash MMR + Sound

I've installed the most recent version of everything and made sure that the dtu's firmware was upgraded. I also installed the MMR which has the flash accel into my XP VM.
For the most part it all works as expected. Here are my observations:
When I start IE and go to youtube, the browser will occasionally crash. Generally browsing the web will result in random ie crashes. Before the MMR install I had no issues.
When playing flash videos, the audio start and stop will lag by a second or two. The audio is actually synced (i specified the sun audio rdp driver rather than the MS audio rdp driver). The little flash icon in the status bar shows that both video and audio are enabled.
So anybody else see the delayed audio start and stop?

segfaultcoredump wrote:
I've installed the most recent version of everything and made sure that the dtu's firmware was upgraded. I also installed the MMR which has the flash accel into my XP VM.
For the most part it all works as expected. Here are my observations:
When I start IE and go to youtube, the browser will occasionally crash. Generally browsing the web will result in random ie crashes. Before the MMR install I had no issues. We have not seen this during testing. If you have an sites where this happens, or reproducible test cases please let us know.
>
When playing flash videos, the audio start and stop will lag by a second or two. The audio is actually synced (i specified the sun audio rdp driver rather than the MS audio rdp driver). The little flash icon in the status bar shows that both video and audio are enabled.
So anybody else see the delayed audio start and stop?Again, we have not seen this in testing. Does it happen with all flash or just some? We tested a lot with YouTube videos and they worked fine. If you have any specific flash that this happens with please add some links here.
I wonder if this is a bandwidth issue. You need about 6.5 MBit/s between the Sun Ray server and the DTU to effectively play a flash video from YouTube.

Similar Messages

  • Srss 4.2 + srwc 2.2  Flash issue

    I have installed the new SRSS 4.2 and SRWC 2.2 (EA1). The server is running Solaris 5/09 (u7) on a x86 server with 8 GB server. (physical box)
    I have installed the MMR plugin on the windows XP SP 3 machine which as IE 8 with FLASH 10AX.
    I have tried both a physical and a virtual XP machines as well as physical and virtual SRSS servers. This doesn't not seem to have any impact.
    I am trying to play this video http://www.youtube.com/watch?v=zz902h6XxR0 which ive seen play smoothly on a sunray demo, but i cannot reproduce it. This video seems to play fine http://www.youtube.com/watch?v=Kf4PjtBqCcQ&feature=popular
    Video seems to be smoothest when the FLASH redirection is disabled (uttsc -F off) at which point it is just run through the RDP protocol... Isnt this the opposite of what is supposed to happen?
    The audio does stay synced and is smooth, however the FLASH video does NOT appear to have improved at all. Is there something im missing?
    I will be happy to provide more information on my environment.
    thanks
    Pete
    Edited by: psorensen on Aug 18, 2009 12:36 PM

    psorensen wrote:
    I have installed the new SRSS 4.2 and SRWC 2.2 (EA1). The server is running Solaris 5/09 (u7) on a x86 server with 8 GB server. (physical box)
    I have installed the MMR plugin on the windows XP SP 3 machine which as IE 8 with FLASH 10AX.
    I have tried both a physical and a virtual XP machines as well as physical and virtual SRSS servers. This doesn't not seem to have any impact.
    I am trying to play this video http://www.youtube.com/watch?v=zz902h6XxR0 which ive seen play smoothly on a sunray demo, but i cannot reproduce it. This video seems to play fine http://www.youtube.com/watch?v=Kf4PjtBqCcQ&feature=popular
    I don't see any significant issues with the first video (the second one has been removed from YouTube since). What DTU are you using (it works fine with the Sun Ray 2 and 2FS here). How bad is it exactly? Do you see the blue interception icon in the tray while playing (if you move the mouse over it, does the tooltip mention SunFlash)? Do you have enough network bandwidth between the Sun Ray server and the DTU (and the Sun Ray server and the Windows server)? About 6.5 Mbit/s is needed at least for a YouTube video. Is the firmware of the DTU updated to the firmware of the Sun Ray EA release you are testing?
    >
    Video seems to be smoothest when the FLASH redirection is disabled (uttsc -F off) at which point it is just run through the RDP protocol... Isnt this the opposite of what is supposed to happen?Yes, it should be better when -F is not used.
    Laszlo

  • RAC hangs when starting or stopping 2nd instance of 2 node RAC

    Has anyone seen the problem with all transactions and/or logins hanging when starting or stopping the 2nd node of a 2 node RAC database. When I shut down the 2nd instance using srvctl I occasionally get errors and long delays connecting. On our larger database with instances having a very large SGAs, trying to connect you sometimes get ORA-12537 or ORA-01033. Users experience a very long hang before getting the errors. These instances have very large SGAs of about 30GB on each node.
    In the log of the first instance we see messages like the following for quite a while.
    Global Resource Directory frozen
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Jan 8 06:59:08 2007
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Mon Jan 8 06:59:08 2007
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Mon Jan 8 06:59:23 2007
    LMS 0: 20740 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20744 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 0: 20882 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20627 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    LMS 0: 20781 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    Thanks in advance.

    I have tested with only one node and starting and stopping is much faster without any cache fusion traffic. The application is not RAC aware, it was written without regard for RAC. As you say there may be some accessing of the same block by all nodes causing RAC to remaster blocks when a node is shut down.
    My concern is the length of time users are afftected when I am starting a node that has been offline for a while. With the large SGA I have, it appears users are affected adversely for several minutes, in affect causing an outage which we are trying to avoid by using RAC.

  • Start or Stop expression at a given frame?

    hello to everyone on the support forum.
    I searched the forum but wasn't able to find anything quite good for resolving the matter.
    This is something that my IT group Charles Stinson, Nick Carangi, and Sandra Connor have been working on fixing for a while.
    I'm getting into expression but the issue is that I am not able to start or stop an expression at a given moment.
    I.E. If i want to wiggle(3, 10) until frame 100.
    How can I set this up?
    Thanks in advance.
    After Effects Cs5.5

    Rick and Dave are correct that it may be easiest to split the layer, but there are examples in After Effects Help for doing this with expressions, here:
    http://helpx.adobe.com/en/after-effects/using/expression-examples.html#expression_example_ start_or_stop_wiggle_at_specific_time

  • Start and Stop Trigger using PXI-6120 and DigitalSta​rtAndStopT​rigger.vi not working :-(

    Hello,
    I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at  the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
    my software as of now.
    Labview 7.1 (with the 7.1.1 upgrade applied)
    Max 4.3.0.49152
    DAQmx 8.6.0f12
    Trad DAQ 7.4.4f7
    before I updated I had the same problem but with the following versions:
    Labview 7.1 (with the 7.1.1 upgrade applied)
    Max 4.2.1.3001
    DAQmx 8.5.0f5
    Trad DAQ 6.9.3f4
    So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
    To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
    I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
    Many thanks,
    Mike

    Hi Graham
    I'm out of the lab today but I'll try and answer your questions as best I can...
    1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
    At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
    2) Does the program end after the stop trigger is implemented?
    Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
    3) Lastly can you give me the details of triggering method. Are you
    using a digital train of users set digital pulses? how long is the
    program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running  and then toggle the line high, wait a couple of seconds and then toggle it low.
    To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
    Any ideas? and thanks for you help,
    Mike

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

    After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
    Does anyone have a solution or suggestion?
    Thanks

  • Need help getting Tomcat 5.0.28 to start (and stop, eventually)

    Hi!
    I am such a newbie to the Terminal and writing scripts, so please forgive my naiveté. I have successfully installed Tomcat in my /usr/local directory, but I am having trouble creating files to start and stop Tomcat, per the instructions on the following page:
    http://developer.apple.com/internet/java/tomcat1.html
    I've followed the directions but continue to get the following error after I execute ~/bin/start_tomcat.
    -bash: start_tomcat: command not found
    My file contains the following code:
    #!/bin/sh /n
    export CATALINA_HOME=/usr/local/jakarta-tomcat-5.0.28 /n
    export JAVA_HOME=/usr /n
    $CATALINA_HOME/bin/startup.sh /n
    If anyone can help me, I would really, really, really appreciate it!
    Thanks!
    PowerBook G4 12"   Mac OS X (10.4.5)  

    Why are there all those "/n" there? Either you or the place you copied from has the wrong slash. But still, it's wronger than that to have them at all: "\n" means a newline (i.e., press "return") not the actual "backslash en" characters. Sometimes people post code with those \n visible: by making it explicit where a line-break should be, one doesn't have as much trouble when a web browser reformats the text and puts line breaks where they don't belong.

  • HP PRO 3400 Series desktop won't boot CPU fan starts and stops , no video, no beeps

    I have the above computer with an i3-2125 CPU, Windows 7 Home Premium 64 bit, and a 300GB Seagate Hard drive.  I've had it for about 2 years and been working fine. It started acting up about 2 months ago.  It would lose the date and time.  I checked the battery, and it was OK, so I kept using the computer.  Then on 9/15/2014 it hung on "Starting Windows", I did the following:
    1.  Ran the built in HP diagnostic on hard drive and memory and they both passed.
    2.  Tried to go to last known good configuration and nothing happened.
    3.  Noticed the date and time were off, replaced the battery, nothing changed.
    4.  Tried another hard drive from another HP PRO 3400 Series and it would boot up but could not set date in bios.
    5.  Tried all kinds of things but could not set date in bios.
          a.  Bios date read 48/00/0048 after removing and replacing battery.
          b,  Tried to reset date to 9/16/2914 and it gets 56/00/0051
    6.  Then it wouldn't boot at all.   So now when you turn on the power, the CPU fan starts and runs for about 1 second, then shuts off for 4 seconds, then starts and runs for another 1 sec and it does this continuously.  There is  no video and no beeps and no difference when all memory is removed.
    7.  I removed the power supply, and checked voltages.  It appears to be OK.
    8.  I removed the motherboard, and inspected it- saw nothing obvious.
    9.  I connected the power supply to the motherboard with nothing else connected to the motherboard, and I get the same thing.  CPU fan starts then stops continuously, no video no beeps.
    10.  I am thinking it is the Motherboard, but I sure could use some suggestions as to what to do next.
    Thanks
    Maxgle from CA

    Maxgle, welcome to the forum.
    I believe that you would get more responses to your problem if you start a thread here.  They are the members who know your computer best.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two

    When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two.
    It did it with my old iPhone 4 in last month or so, and it I hoped it would go once I updated to new iPhone 5. The problem has transferred to new phone too.
    I can't sign in to iTunes account on iPhone. It takes the password then resets to baseline. No error message comes up. On the base computer (pc) it will allow me to sign up and buy songs, apps etc. I can then sync the phone and put them on it. It just won't let me buy direct from the .
    As there are no error messages I am at a loss what to do. I have updated the payment details on my account, and my husband has an iPhone 4 and has no such problems. We share the same wifi. I have tried with 3G as well as wifi, with no luck.
    I am pretty much out of ideas, and have tried searching forums but there is so much overlap between queries that I can't find a similar problem from someone else, but I am sure it exists!
    Can anyone please help me?
    Thanks in advance
    Sarah

    I figured it out!
    I read a solution for something that sounded similar.
    Anyone in similar position:
    Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
    Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
    Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
    Simple really, but some like me won't think f this themselves!
    Hope that helps

  • Emac tried to start then stopped, finally after 3 attempts it started

    After a hard drive failure i run my emac on an external hard drive through a fire wire.
    That worked OK till yesterday when it tried to start but after a few seconds of the normal fan noise and before the screen lit up, it stopped. I hit the switch again and it did the same thing 3 times but on the 4th attempt it started but a white screen came on and told me to type "mac-boot" and hit return.
    It finally started.
    The external hard drive was still running OK at the time it had stopped, it was internally that it had stopped.
    I took the back off the emac and vacuumed the dust from inside and after that it has since started normally every time though it seems slower to start, but I could be mistaken about that as I can't now remember noticing how long it took to start before.
    Someone said the problem could be the power supply failing.
    Is there any way for me to diagnose what exactly is wrong, since an emac power supply is not same as a PC power supply?
    Could a PC power supply be modified to replace the emac power supply as I have a failed PC with a good power supply I could use if it would work?
    Any help or suggestions would be appreciated.
    Ann

    Hello and thanks for your reply.
    I neglected to mention that at the time of the hard disk failure I put a new hard disk inside too with the intention of using it as a back up to the External Hard Drive but I found it was easier in the end to get another external hard drive and now I use Time Machine to back up on to that 2nd external hard drive every few days.
    I disconnect the 2nd external hard drive when I'm not backing up data on to it.
    Most of the time when I boot up the emac it somehow knows to go straight to the 1st External Hard Drive instead of the Internal Hard Drive but occasionally it will go to the Internal Hard Drive and when it does that I have to go to System Preferences and then to Startup Disk and actually select the External Hard Drive icon and that's what I had to do every time when it was having that weird starting then stopping phase, ie, every time during the starting then stopping phase, when it did start it went to the Internal Hard Drive even after I would go into Startup Disk and select External Hard Drive it would start on the Internal Hard Drive, so in the end I didn't bother trying any more and I just connected to the internet through the Internal Hard Drive until I took the back off and vacuumed the dust out and ever since I did that it's been running normally, ie, it's always selecting the External Hard Drive again and running at what seems to be normal speed for everything too.
    I just don't know why it went into that starting then stopping phase.
    When it was in the starting then stopping phase the internal fan noise would stop but the little white light next to the DVD door would stay lit up so it was definitely getting some power from somewhere but it was failing to go on and boot up because the power to the internal fan had failed ie, I could clearly hear the fan stop only 3 or 4 seconds after hitting the start button.
    I've just had a look at the capacitors that you suggested and they look perfect, like new in fact, they have a shiny metallic top with a + indented in the top and they are flat and they show no sign of a dried up liquid or any bubbling up anywhere.
    Anyway, your reply was helpful since you ruled out the Power Supply and the capacitors, so thank you for those.
    The friend who advised me how to get going again after the initial hard disk failure, ie, via the External Hard Drive connected by fire wire, did warn me not to touch anything in the back that wasn't directly related to changing the hard drive but thanks for the heads up anyway.
    Ann

  • Report on active sync actions (like starting and stopping the sync)

    Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
    Thanks!

    Hi Smit,
    I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
    Well ... earlier,  options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
    Regards,
    Shiraz Anwar
    I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach.

  • Music starts and stops during playback of burned DVD

    I really need help with this problem...I made a slideshow and added music from itunes in the program IDVD. Once I burned the DVD the music will start and stop throughout the DVD and not at chapters as I read in other threads - but in random places on the DVD. The DVD sounds like it gets hung up and then starts again. This is my first project using IDVD, so any help would be great.

    Debra,
    Do your project have music purchased from iTunes? If so, that could be the cause of this problem. Music from iTunes is DRM-protected and can cause problems in playback. To take care of this, first burn all of your purchased music to a CD, then reimport in an aiff format. To do this, in iTunes, go to iTunes>Preferences>Advanced>Importing. Look for "Import using", and use the drop-down menu to select AIFF encoder.
    Good luck.

  • In Month View, showing start and stop times for appointments

    Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave

    I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.

  • Printing event start and stop times

    In month view, is there any way to have both the start and stop times for an event show when you print the calendar so you can see the duration of an event - thanks.

    You might be able to use this script to reset the start/stop times to zero.  Try with a small selection and see if it works for you.
    http://dougscripts.com/itunes/scripts/ss.php?sp=batchtrimtime

Maybe you are looking for