Delayed button display

I created a menu in motion. It consists of video and audio and artwork of a prescription pad from a pharmacist. The pad eventually comes full, about 20 seconds in. How do I not allow the viewer to activate the buttons until the pad is full and the motion generated text is revealed basically about :30 into the menu. Is there a way to delay the buttons from showing up or being able to be activated. The buttons are being generated in DVD studio pro. All software is updated most recent.

http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=27738

Similar Messages

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Button Display Symptom

I have 3 regions on a page and the 2nd region has 4 buttons and an SQL query report which displays data from EMP.
There are two page item:
HIDE_SHOW -- which is Show to show the data and Hide to hide the data.
P1_SAL_LIMIT -- which limits the employees shown by salary: 0 (default), 1500 or 2000
The buttons are:
Show -- which, when pressed, shows the report (Not the entire region just the data lines of the report.)
              (The Show button displays when :HIDE_SHOW = 'Hide'. Note the data is hidden when this button displays.)
Hide -- which, when pressed, hides the report
              (The Hide button displays when :HIDE_SHOW = 'Show' and the data is being displayed.)
SAL > 1500 -- Which show only employees with sal > 1500
SAL > 2000 -- which show only employees with sal > 2000
The Query is
select ename,job,sal
    from emp
   where :HIDE_SHOW = 'Show' and SAL > :P1_SAL_LIMIT
What works:
Show, Hide and Sal > 1500 work fine together. Note: the Sal > 1500 button sets :HIDE_SHOW to 'Show' so one can see the data.
But I need to do a computation when a Sal button is pressed, so here is what I tried. The SAL > 2000 button is set up with Dynamic Actions (PL/SQL block and page refresh). Note: I need to do a branch to (the same) page or a refresh rather than a page submit because of activity which may be pending in the other regions on the page.
What I need /expected when Sal > 2000 is pressed: Tthe Hide button will display because :HIDE_SHOW is set to 'Show' and data is being displayed.
Problem when Sal > 2000 is pressed: Even though I set :HIDE_SHOW to 'Show' in the computation, pressing Sal > 2000 has no effect on the Show button.
It's a Session State problem, right? But I'm not sure how to solve it without a Submit.   I added a Set Value to the DAs but that did not solve the problem.
How do I get the "Show" button to react to the change in the value of :HIDE_SHOW?
You can see it set up here:
WS: APEX_EXAMPLES_01
demo / demo
Application 16604 (Button Control), p. 1
Thanks,
Howard

Yes, you're right, the Show buttons were not quite working, sorry, I was concentrating on the filters. I fixed the hide show for the first region. Region 2 is mostly there and you can replicate the functionality for that one. However, the Sal filter buttons for region 2 do work and you can see how it all works independently. Please concentrate on the techniques.
The basic steps for the filters are:
1. Set the filter limit
2. Set the Hide_Show variable
3. Hide the Show button
4. Show the Hide button
5. Refresh the report.
Notice the computations. They are needed to initialize the values.
I also changed things so they don't trigger off the change of value of an item. That just seems obscure to me when the user cannot directly change the item. It seems better to trigger off button clicks. That's what the "Report 1 SHOW button" and "Report 1 HIDE button" DA are for. If you look at them I think they are really easy to follow (Show button, Hide the other button, Set the Hide_Show filter, Refresh report)
When you break it down into individual steps and give meaningful names to your elements (items, regions, da, etc..) I think it all becomes a lot more maintainable.
I have definitely seen unmaintainable applications since I started with APEX way back on HTMLDB 1.6. That said, they are mostly easy to maintain when things are well thought out and steps are broken down into easy understandable actions.
Good luck!
Thanks
-Jorge

How to control custom button display or hide in toolbar

I had been added four buttons in Acrobat Tool bar.
Now I find a function AVToolButtonSetComputeEnabledProc in SDK that this function only control the button enable or disenable.
Now I want to control the custom button display or hide, how can I to do?
Does this SDK have a API to achieve my need?

As of Acrobat X, we no longer support dynamic hiding/showing – only enable/disable.

Delaying button's appearance

Is there any way to cause the buttons on a menu to delay before appearing on the menu screen?

Definitely works in DVD-SP 2 (just did it the other day) but as "Houghts" says it may be that you need to use the Simple overlay method (whhich is what we do)
The only thing that doesn't work properly is returning to the loop point if you menu out of what's playing (I think I'm right in saying it defaults back to the beginning of the menu). We usually create two versions of the menu - one with the loop and delayed buttons appearing - for when the disc is first played - then one which has the buttons load straight away from the loop point.
Hope that makes sense (kind of)
Steve Kirkham

WAD Report delaying to display output

Hello,
WAD report taking 6 min time to display the output but the same report displaying output
in 1 min 50 sec when I executed in BEx Analyzer
The Same BEx report I incorporated in WAD but it's delaying to display the output.
What might be the cause in delaying the output display.
Srujay

Hi,
Please to use the new cache mode as note:
1026944 - New cache mode for BI 7.0 without directory
As per the note:
To activate the new cache mode, run the report SAP_RSADMIN_MAINTAIN with
the following parameters and the option "INSERT":
OBJECT: RSR_CACHE_ACTIVATE_NEW
VALUE: X
After this procedure you can benefit from the new cache mode by
activating it for your query or queries. Go to RSRT -> enter query -> properties ->
cache mode: 5 Cluster Enhanced should be selected.
Or via mass maintenance to all queries (transaction RSRT -> menu "Environment" -> "Mass Maintenance").
It should resolved your issue.
Thanks,
Venkat

Condition For Button Display

Hi All,
I have new requirement that create push button to reject all line items in complaint page.
I have done all changes. Now button is functioning as expected.
Issue is button display by default in the initial page even we have not entered any order number in that page. Here i need to set some conditon that if item list is not empty then need to display the button.
Component : ICCMP_BT_BUTTON
View          : ButtonBar
Context Node : BTADMINI
Item List from Another Component & View
Component : ICCMP_BTITEM
View          : ItemList
Context Node : BTADMINI
How can i set condition in HTM page whether Node(BTADMINI) is empty or not. How can i access here.
Note : Button Component as well have Contextnode (BTADMINII).
Hope you got the detailed issue.
Thank you,
Cha

Hi Andreai,
Thank you, as per your suggestion, created bound in "WD_USGE_INITIALIZE" method, initially in this method for Button usage only "BTADMINH" bound was there. Now added BTADMINI as well.
BTADMINI Entity gets populated now. Issue is backend is not updated with the value we are passing from UI.
We have a button in frontend which is used to reject all items of the order.
But if we click the button, item (BTADMINI) entity get filled now, using the entity, calling the execute method with the value of "SetRejectReason" but if we look at the beckend item status still in Open and not "Reject".
Event handle method Code (In Button Component)
lr_entity ?= me->typed_context->btadmini->collection_wrapper->get_current( ).
ls_param-name = 'REASON'. "#EC NOTEXT
ls_param-value = iv_rejection_code.
APPEND ls_param TO lt_param.
lr_entity->execute(
iv_method_name = 'setRejectionReason'
it_param = lt_param ).
Button COMP : ICCMP_BT_Button
Main COMP    : ICCMP_BT_COM ( Which has Item Structure as well, here Button component has been called)
My assumption, BTADMINI instance only might be populatuing without value. Can you please suggest what is the issue
Thank you,
Cha

Delayed Data Display for Tables and Views

Is it possible to delay the display of data for data and views.
I work on remote databases over relatively slow ADSL/Dialup connections when compared to a LAN/WAN.
If the tables are large, the data retrieved can be relatively slow and therefore the setting of a filter before display would reduce the amount of data retrieved and enable the viewing of the attributes, statistics etc in a timely manner

AL_INDEX and AL_COLMAP store metadata of tables that you import in Datastore
AL_COLMAP and AL_COLMAP_TEXT table store column mapping information that use in Dataflow, this data is usually populated when you save Dataflow, check if the "automatically calculate column mapping" option is checked in the Tools-> Options window in Designer
if you are not seeing any data in these 2 tables, then go to Designer, select Datastore tab in object library right in the Datastore workspace select Repository menu option and select Calculate Usage Dependency once that completes do select Calculate Column Mapping from the same menu, once that completes check if you see data in these 2 tables

Play button displaying on all slides

When I view a published project in SCORM cloud or in Moodle the play button displays on every slide. This doesn't happen when i view the project locally.
Does anyone know how to stop this? I can't use auto play as this is not compatible with html5 output.

Please upgrade to 8.0.1.242: http://blogs.adobe.com/captivate/2014/10/a-free-update-to-adobe-captivate-8-is-now-availab le.html
I posted links in my latest blog post: Captivate 8.0.1 Install? Keep your Customisation! - Captivate blog

"Save Search" button displays above SubTab region for QueryRN

I've created a subTab layout and on the first tab, a QueryRN with resultsBasedSaearch, I've enabled simple, views, and advanced panels. The QueryRN is on the first tab, I have other details on the subsequent tabs.
The "Save Search" button displays above the subTab bean. This means that when I navigate to another subTab, I still see "Save Search".
Can I move this button declaratively? or do I need to show and hide it with controller code?
thank you,
Jerry.

hmm. the other tabs do not have query beans. It seems this button defaults to a page level button even though I do not have a page level button layout. btw, I'm using the OASubTabBarBean declaratively.
--Jerry.

Using time delay for displaying tooltips

Hi guys, hope you are all fine,
I have a little problem, i need to use time delay for displaying a tooltip for a specific amount of time but i don't know what code to use.
Can you please give me a hand? I also try to find out the right way on how i can use tooltips when using a Jpanel and paintComponent. I amcurrently using setXORMode but this is not too efficient.
Thanks guys,
Regards,
John.

Ok guys, for any other who need this info, you get time delay by this:
try {
Thread.sleep(time);
} catch (Exception e) {}
// in "time" you put an integer value which represents milliseconds

Button displayed among this region's items clears fields

I've created a Button displayed among this region's items clears fields that's in the middle of my form, set to Submit Before...
When click the button, it submits and the field items above the button clear off the form.
I don't need it to submit, I just need it to make three fields appear on the form if needed, hence the use of the button.
Thanks in advance!

Hi,
userRRRYB wrote:
The user is cataloging documents. On the form she enters document number, title, owner, and document type (Work Instruction, Verification Sheet, Pallet Layout, etc.) If the document type is a Product Label, there are three more fields that need to be populated. Because the Product Label is one of over ten types and it's the only type that requires these extra fields, I got the bright idea to create a button that, when clicked, displays the fields.
The problem is that the button is 'among the region's items' and submits when clicked (Request = Go) so it submits and clears the fields that have been populated prior to the fields in question.Assuming you are on Apex 4.0+ Instead of using buttons to display 3 extra fields when document type is product label use dynamic action to hide and show items, Here is how you create it
1) Create standard dynamic action
2) Selection type (item) -> item(s) -> :PXX_DOCUMENT_TYPE -> Value (20) Assuming you have created select list for document type field
3) Specify true action -> show -> item(s) (select the three items you want to display) -> create false action (checked)
By using DA your field values will not clear out.If you are on 3.0 you can do this with javaScript.
It would be easier to help you out if you provide APEX version or recreate your problem on apex.oracle.com
Regards,
-Senthil

I need to have both Next & Back buttons displayed for viewing 20 records at

Hi Everybody,
I have a JSP page which has 2 part: The header (Selection for search with the SEARCH button) and a search result table.
Is it possible to remember the last record printed & start from the next record when I click on "Next" button? When I click on the "Next" button will it create new page? I need to have both Next & Back buttons displayed for viewing 20 records at a time.
The current JSP is using "session.removeAttribute("XXXWorkItemVector") to print out records.
I'm very new to JAVA and JSP, so please help me with my assignment and send me e-mail to [email protected]

Check this:
http://forum.java.sun.com/thread.jsp?forum=45&thread=188239
This should be of help to you.

Volume button displays randomly on screen

volume button displays randomly on screen

It sounds like you have some sort of Backup software that mounts an external drive or network drive periodically.
Generally Macs become less responsive during backups -- and that might explain the jerky mouse movement.

I want to display live video in LV, with the option to click on "delay" button, to view what happened N s. ago (i.e., a variable video delay)?

Hi. I have a standard video camera + PCI 1408. I can nicely show the current image, using LL Ring examples. I want a boolean switch so I can switch from watching the live video to the video recorded N seconds ago. My initial hope was to use LL Ring, with
lots of buffers, and copy/extract either latest buffers or a buffer several acquisitions ago. However, this seems to add no delay at all. Suggestions please? Thanks Patrick

Patrick,
What I start with is the sequence acquisition. I change it from one time to continuous, and simplify it a little bit.
I have included an example that shows how to set up a buffer and display delayed video.
One thing you have to do is open MAX and change the maximum number of buffers for IMAQ to something larger than 50. I usually select around 2000 buffers so that I never run out.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Delayed_Video.vi ‏66 KB

Delayed button display

Similar Messages

Maybe you are looking for