Delayed inbound email between Sonicwall ES300 and Yosemite server

I currently have a setup consisting of a Yosemite email server with a Sonicwall ES300 as a relay.
Under moderate to heavy email traffic, I've been noticing that inbound emails (from the ES300 to the Yosemite server) begin to queue up on the ES300 with the message of ECONNRESET. This queue will sometimes rise as high as 200 emails and will eventually all clear out at once (sometimes after an hour or so). Email will flow correctly for a short period before the queue will begin to build again. This does not affect outbound or internal email. During times of low email usage (weekends), emails are rarely queued.
I've experienced this issue as well with an older server running 10.6. I'm not sure wether this is something that needs to be corrected on the Yosemite server or the ES300.
I'm curious if anyone has experienced similar issues. Is there something within main.cf or master.cf that could be rate limiting the IP of the ES300? If this is the case, it would have to be something in the default configuration since I haven't configured anything out of the ordinary. My other theory is that this could be due to high CPU usage on the ES300 causing connection issues.
Any help or ideas would be greatly appreciated.
Thanks!

The web interface System Status page for the SonicWall will show CPU usage so you can see if it is running high. You can also on newer models go to the Diagnostics page and run the Multi-Core monitor to see a real time chart of CPU usage.
Some systems will impose a delay on connections if they 'decide' that the connections are suspicious e.g. possible spam or hacking attacks. You could temporarily as a test try disabling any anti-spam or anti-spoofing features you may currently have enabled. Apple's OS X also has a software firewall which can do much the same thing. See the following.
OS X Server: About the Firewall service - Apple Support
OS X Server: How to enable the adaptive firewall - Apple Support
Other than that, your SonicWall should be covered by a support/extended warranty agreement, this would allow you to contact SonicWall directly for support. They can then with your permission look at your SonicWall logs to provide you assistance.

Similar Messages

Delayed received emails Using Outlook 2010 and Exchange Server 2010 SP3

Hi,
Some of our users are encountering delayed emails. When our clients sent email to us, some of our clients received this an hour late, sometimes they will received this the next day.
Our users uses Outlook 2010 and our Exchange Server is 2010. We have already patch this to SP3 as it says that the delayed emails was already fixed in this SP3 but we still encounter the delayed emails.
Thanks.
Collins.

Hi Collins,
In order to narrow down this issue, please use OWA to send and receive a test email, see whether the delay will still happen or not.
From your description, the issue happens when certain users receive emails from internal. I recommend you use message tracking log to determine which step delays.
Here is an article for your reference.
Configure Message Tracking
http://technet.microsoft.com/en-us/library/aa997984(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

How do I sync my email between my iPhone and iPad?

How do I sync my email between my iPhone and iPad?

A razmee209 said, set up your email in settings on both devices.
iPhone email will always be up to date.
The iPad will update when it has internet connection. If it is a wifi only iPad, it will only update when connected to wifi, but will do so automatically.

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

How to provide joins between oracle tables and sql server tables

Hi,
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server.
how to provide joins between oracle tables and sql server tables ? Any help on this
Regards,
Malli

user10675696 wrote:
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server. Bad idea most times. Heterogeneous joins do not exactly scale and performance can be severely degraded by network speed and b/w availability. And there is nothing you can do in the application and database layers to address performance issue at the network level in this case - your code's performance is simply at the mercy of network performance. With a single glaring fact - network performance is continually degrading. All the time. Always. Until it is upgraded. When the performance degradation starts all over again.
If the tables are not small (few 1000 rows each) and row volumes static, I would not consider doing a heterogeneous join. Instead I would rather go for a materialised view on the Oracle side, use a proper table and index structure, and do a local database join.

Difference between Integration Engine and Integration server.

can any 1 explained in detail about difference between Integration Engine and Integration server.
thanks in advance

Integration Server and Integration Engine are used synonymous with each other. But there is a sublte difference if you actually look into the XI architecture images provded by SAP.
The Integration Server contains,
1. Adapter Engine
2. Business Process Engine
3. Integration Engine.
So, taking this into picture I guess Integartion server is a collection of these 3 while integration engine is one of the runtime components of XI. All messages are processed in the Integration Engine.
regards
Bhavesh

Difference between exec. target and executing server in background jobs

Dear experts,
Please let me know
Difference between exec. target and executing server in background jobs

Dear Joe,
Sorry for this
I am closing this threaf now

Difference between Application log and Application server

Hello Friends,
Could you plz explain difference between Application log and Application server?
Regards
Kanth

Application log is details about the business transaction, ie status / error messages
Application server is the system <hardware> on which application is running.
Regards,
Mahesh

Connection between SMD Agent and SMD server via SAProuter

In our scenario, we have to setup the connection between SMD agent and SMD server(solution manager server) via saprouter. But during the installation of SMD agent, we can only specify the hostname of the managing system, we have no place to add saprouter string(/H/..../H/). I I am not sure if we could connect the agent and server via saprouter, if so how to do it?
Hope someone can give us your precious advices on this issue.
Karl

Perfect; and thanks for your response. I found this help page for developers to implement P4 support over SAP router: http://help.sap.com/saphelp_nw73/helpdata/en/48/2992d7ad8758d7e10000000a421937/content.htm
But in the SM Diagnostics Setup options I can set up only a direct HTTP adresses and have no options to set up connections over a sap router to P4 ports directly. I can at the moment only solve my problems with NAT or firewall rules.
And also the diagnostic agent setup has no options to config a proxy or sap router. I found yesterday a blog on sdn side with screenshots of the setup with all available connection opetions to SLD... sry I can not post this link today.
This is an official statment of SAP from the current version of SMD guide; it is also possible but why not from the beginning???:
In some network conficurations, the Diagnostics agent has to connect to the Managing system though a SAP router.
This feature will be fully supported in Solution Manager 7 Ehp2 (7.02).
In order to enable this feature in Ehp1, please contact the Diagnostics Agent support team to get information on how to
setup the agent and on which patch level you can perform the installation.
This thread were a long time not answared; proxy and routing connections are mostly stepmotherly handled by SAP; this is also a problem by set up of automatic RFC generations in SMSY; why there are in the setup assitents no options to set up the router string.
I have absolutly no comprehension for this in year 2011. All this technics are good known and long time tested.
In this case the f**k has provoked an answare to this thread and this is what I expected; but sorry for my style You are right I could also writh why the heck
FAQ:
SMD root side on SDN: http://service.sap.com/diagnostics
SM FAQ: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4e49dbea-0c01-0010-91bd-f0b61388c9ae
SM Setup Home: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Home
SM Diagnostic Troubleshooting Guide: https://websmp201.sap-ag.de/~sapdownload/002007974700000409092009E/DiagAgent_TroubleShooting.pdf
SMD Candidate Setup: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents

Synchronizing emails between my iBook and my Mac Mini

Hi there, I've had a search around this forum and I can't find an exact response to my query (most likely my search string blows).
Anyway as the title suggests I've got an iBook and a Mac Mini. I have an email account that is hosted on a web server based upon my own domain name and thus no affiliation to the .mac service. Also I use Mail as my email application.
Up until a couple of week ago I used iMAP to allow me access to my mail and my mail folders on both computers. All hunky dorey. A couple of unfortunate events have left me in a bit of a pickle however. First my server that hosts my iMap email has disappeared off the face of the planet and by the looks of it so have the hosting company as I have lost all contact with them. On the same day however my Mac Mini died on me and required a clean install of Tiger.
Here's where the problems come in. Obviously I can no longer get my emails from the server as it no longer exists. My Mac Mini was the main computer for accessing mail, so the full bodies had been downloaded for each message when I opened them. Problem two, my Mini is now wiped.
My ibook is used for infrequent email access so although it still shows the folder structure for my emails, mirroring that of my old server, it has only downloaded the bodies of one or two emails and the rest are just headers and subjects.
Needless to say I'm now a little wary of iMAP as I've lost around 1000 pretty important emails from the last 5/6 years. Also as much as .Mac is kool, I a) want to keep my own domain based email address and b) I will have more than 1GB of email within no time so it'll end up costing me way more than I'm prepared to pay.
Now that you've got my life story, time for me to explain where I need help. I'm probably looking to use POP mail now so I have a downloaded copy of my mail, however I would be willing to use iMAP if there is a way I can get my iBook to automatically download the full message bodies without me having to open each email or select its folder.
Is there a way to do this?
An other option would be to use POP, as mentioned, and I would be looking to synchronise my emails (including it's folder structure) between my two macs?
Is there a way to do this?
Thanks for your help and sorry for such a long story
Gareth

Hi there, I've had a search around this forum and I
can't find an exact response to my query (most likely
my search string blows).
Try searching Mail Help instead (see below). Another place to search for this type of information is http://search.info.apple.com/.
I would be willing to use iMAP if there
is a way I can get my iBook to automatically download
the full message bodies without me having to open
each email or select its folder.
Is there a way to do this?
Yes. If you type IMAP in the Mail Help search box you should find an article titled Synchronizing an IMAP account to use offline that contains the information you're looking for.

How do you sync non-icloud email between macbook mail and iPhone?

How do you sync non-icloud email between macbook and iPhone?

Revised question--specifically within Mail client:
How do you sync non icloud email between iPhone and Mail on Macbook?

Delaying when switching between apple mail and safari

just on mavericks.
it more or less looks and feel ok but...
when I switch between apple mail and safari, everything "freezes" for some seconds (up to 30).
anyone similar experiences?
what could be the cause of that?
its really disturbing.

I am a little puzzled by the libraries and switching between the libraries. My personal computer has the majority of the movies and content that would be transfered to the appletv. I chose to only select a minimal amount of content (of movies and tv shows, music via playlists) so there would be space left that would hold photos. Also, i just want to send over only what I want to view (manual synch) If I switch to my Kids library, it streams all the content well (movies & tv shows)(which is fine and streams well) If I switch back to my library, it shows every movie, every tv show, hundreds of music playlist that I did not choose to see. (stream mode) The only fix is to reboot the computer, and all is well. anyone experience this issue?

HT1277 can I delete emails from my IPhone and the server as well?

Can I delete emails from both my IPhone 5 and the server as well?

It's very easy to do - open up the music app, find the song/artist/album you want to delete and then swipe on it right to left and press 'delete'. Once you have done this it will take up no more space on your device whether it's in the cloud or not.
If the song is still appearing in the music app with a little cloud next to it then you can stop it from showing by going into settings, music, and turning off 'show all music'. Note that this will remove ALL songs from the music app that have the cloud next to it (the cloud means they are in the cloud, online, but not stored on the device) and if you want to play them you will have to open itunes and redownload it, or change this setting back to on.
Let me know if you need any more help!

SSO between R/3 and Web Server Filter is not working

Hi all,
I have to configure SSO to access from SAP R/3 to a third-party web application through Web Server Filter.
R/3  WSF  3rdParty App
I think everything is configured properly, but when I issue the http request from R/3 to WSF I get the following error in sapsso.log file in apache server:
======================================================
trc file: "/usr/local/app/apache/sapsso.log", trc level: 3, release: "620"
Thu Nov 29 13:44:40 2007
Webserver Ticket Filter Release Version 5.0.2.8
Loading of the props returned 0=OK.
Max cache size = 0
Initialization done.
Checking validity...
Ticket Validation Error: expired.
Checking validity...
Ticket Validation Error: expired.
Checking validity...
Ticket Validation Error: expired.
Checking validity...
Ticket Validation Error: expired.
Checking validity...
Ticket Validation Error: expired.
Checking validity...
Ticket Validation Error: expired.
======================================================
And in the error_log file of the apache http server theres the following:
======================================================
proxy_cache.c(969): No CacheRoot, so no caching. Declining.
proxy_http.c(586): Content-Type: (null)
Ticket is AjQxMDIBABgAUgBBAEwATABVAEUAIA...
Got date              from ticket.
Cur time = 200711291244.
Computing validity in hours.
Computing validity in minutes.
CurTime_t = 1196426640, CreTime_t = -496601312
validity: 216000, difference: 1693027952.000.
proxy_cache.c(969): No CacheRoot, so no caching. Declining.
proxy_http.c(586): Content-Type: (null)
Ticket is AjQxMDIBABgAUgBBAEwATABVAEUAIA...
Got date              from ticket.
Cur time = 200711291244.
Computing validity in hours.
Computing validity in minutes.
CurTime_t = 1196426640, CreTime_t = -496601312
validity: 216000, difference: 1693027952.000.
proxy_cache.c(969): No CacheRoot, so no caching. Declining.
proxy_http.c(586): Content-Type: (null)
Ticket is AjQxMDIBABgAUgBBAEwATABVAEUAIA...
Got date              from ticket.
Cur time = 200711291244.
Computing validity in hours.
Computing validity in minutes.
CurTime_t = 1196426640, CreTime_t = -496601312
validity: 216000, difference: 1693027952.000.
proxy_cache.c(969): No CacheRoot, so no caching. Declining.
proxy_http.c(586): Content-Type: (null)
======================================================
It seems like there isnt the date in the ticket issued by SAP R/3. However, I tried to configure sso between the same R/3 server and an EP and worked fine.
I also tried to decrypt the ticket issued by R/3 but I get a segmentation fault.
Does anyone can help me?
Thanks in advance.
Roger Allué i Vall

Here's a excerpt of a strace of the httpd processes when receive the http request:
13863 accept(16, <unfinished ...>
13864 accept(16, <unfinished ...>
13865 accept(16, <unfinished ...>
13866 accept(16, <unfinished ...>
13867 accept(16, <unfinished ...>
13868 accept(16, <unfinished ...>
13872 accept(16, <unfinished ...>
13863 <... accept resumed> {sa_family=AF_INET, sin_port=htons(2476), sin_addr=inet_addr("10.80.183.46")}, [16]) = 3
13863 rt_sigaction(SIGUSR1, , {0x805fd50, [], SA_INTERRUPT}, 8) = 0
13863 fcntl64(3, F_SETFD, FD_CLOEXEC)   = 0
13863 getsockname(3, {sa_family=AF_INET, sin_port=htons(80), sin_addr=inet_addr("10.41.235.48")}, [16]) = 0
13863 setsockopt(3, SOL_TCP, TCP_NODELAY, [1], 4) = 0
13863 read(3, "GET /Silicon/loginPasarela.jsp?accion=urgencias&icu=0010000694%20&nhc=0000147810 HTTP/1.1\r\nAccept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, /\r\nAccept-Language: ca\r\nsap-mysapsso: 200711291818281ppOT/XT2eKtb8Unh0aexQAjQxMDIBABgAUgBBAEwATABVAEUAIAAgACAAIAAgACACAAYAMQAwADADABAAUgBIAEkAIAAgACAAIAAgBAAYADIAMAAwADcAMQAxADIAOQAxADcAMQA4BQAEAAAAPAkAAgBj/wFQMIIBTAYJKoZIhvcNAQcCoIIBPTCCATkCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCARgwggEUAgEBMBMwDjEMMAoGA1UEAxMDUkhJAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNzExMjkxNzE4MjhaMCMGCSqGSIb3DQEJBDEWBBRNZ7rlzxjw9r4UNi4m/MBvHYXK0TANBgkqhkiG9w0BAQEFAASBgNeYexwxhY7cUDZG7mGKmaljgqt2NBdlV!WA/4FUSFVpIewDtMQDtLjcAcVRsH2QMWxPs0!QSvlqlJHdm7VIvMe9pWMvs6ld8/U!lOTSQqtNyI!am770SgRMR60eiV3Ir8q8wfR8VXnO9acHHePnVN4O24!jwCOPxm6XAQuKMUAS\r\nsap-mysapred: http://sapwhi01.argos.gencat.intranet/Silicon/loginPasarela.jsp?accion=urgencias&icu=0010000694 &nhc=0000147810\r\nAccept-Encoding: gzip, deflate\r\nUser-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.2)\r\nC", 4096) = 1260
13863 rt_sigaction(SIGUSR1, , , 8) = 0
13863 time(NULL)                        = 1196356708
13863 read(3, "ookie: MYSAPSSO2=AjQxMDIBABgAUgBBAEwATABVAEUAIAAgACAAIAAgACACAAYAMQAwADADABAAUgBIAEkAIAAgACAAIAAgBAAYADIAMAAwADcAMQAxADIAOQAxADcAMQA4BQAEAAAAPAkAAgBj%2fwFQMIIBTAYJKoZIhvcNAQcCoIIBPTCCATkCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCARgwggEUAgEBMBMwDjEMMAoGA1UEAxMDUkhJAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNzExMjkxNzE4MjhaMCMGCSqGSIb3DQEJBDEWBBRNZ7rlzxjw9r4UNi4m%2fMBvHYXK0TANBgkqhkiG9w0BAQEFAASBgNeYexwxhY7cUDZG7mGKmaljgqt2NBdlV%21WA%2f4FUSFVpIewDtMQDtLjcAcVRsH2QMWxPs0%21QSvlqlJHdm7VIvMe9pWMvs6ld8%2fU%21lOTSQqtNyI%21am770SgRMR60eiV3Ir8q8wfR8VXnO9acHHePnVN4O24%21jwCOPxm6XAQuKMUAS; JSESSIONID=50B5570A234B89887690DF50A993477D\r\nConnection: Keep-Alive\r\nHost: sapwhi01.argos.gencat.intranet\r\n\r\n", 4096) = 730
13863 time(NULL)                        = 1196356708
13863 write(2, "Thu Nov 29 18:18:28 2007\n", 25) = 25
13863 write(2, "Ticket is AjQxMDIBABgAUgBBAEwATABVAEUAIA... \n", 45) = 45
13863 time(NULL)                        = 1196356708
13863 write(5, "\nChecking validity...\n", 22) = 22
13863 time(NULL)                        = 1196356708
13863 write(2, "Got date              from ticket.\n", 35) = 35
13863 time(NULL)                        = 1196356708
13863 time(NULL)                        = 1196356708
13863 write(2, "Cur time = 200711291718.\n", 25) = 25
13863 time(NULL)                        = 1196356708
13863 write(2, "Computing validity in hours.\n", 29) = 29
13863 time(NULL)                        = 1196356708
13863 write(2, "Computing validity in minutes.\n", 31) = 31
13863 time(NULL)                        = 1196356708
13863 write(2, "CurTime_t = 1196443080, CreTime_t = -496601312 \n", 48) = 48
13863 time(NULL)                        = 1196356708
13863 write(2, "validity: 216000, difference: 1693044392.000.\n", 46) = 46
13863 time(NULL)                        = 1196356708
13863 write(5, "Ticket Validation Error: expired.\n", 34) = 34
13863 time(NULL)                        = 1196356708
and so on.

ODBC connectivity between Oracle 11G and MSSQL Server on Solaris 10

When we were running in 10G, I was able to successfully configure hsodbc using unixODBC and freeTDS to allow for an ODBC connection between Oracle and MSSQL Server.
A few weeks ago we upgraded to 11G and I've been struggling to get the connectivity (dg4odbc) working.
In our 10g environment unixODBC and freeTDS were compiled as 32-bit. I have recompiled them as 64-bit and switched over to an 11G listener and I am getting the following error:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
here are my configuration files:
/usr/local/unixODBC/etc[PPRD]> more odbc.ini
[ODBC Data Sources]
identipass = MS SQL Server
[identipass]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Setup = /usr/local/freetds/lib/libtdsodbc.so
Description = MS SQL Server
Trace = 1
TraceFile = /export/home/oracle/ODBC/odbc.trace
Server = stormwind
QuoteID = Yes
AnsiNPW = No
Database = identipass
Port = 1433
TDS_Version = 8.0
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
/usr/local/unixODBC/etc[PPRD]> more odbcinst.ini
[TDS]
Description=FreeTDS driver
Driver=/usr/local/freetds/lib/libtdsodbc.so
Setup=/usr/local/freetds/lib/libtdsodbc.so
Trace=Yes
TraceFile=/tmp/freetds.log
FileUsage=1
UsageCount=2
tnsnames.ora
identipass =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SID = identipass)
(HS = OK)
listener.ora
LISTENERODBC =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENERODBC=
(SID_LIST=
(SID_DESC=
(SID_NAME=identipass)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
(ENV="LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/hs/lib")
(PROGRAM=dg4odbc)
And finally, output from the trace file:
/u01/app/oracle/product/11.2.0/db_1/hs/log[PPRD]> more identipass_agt_1381.trc
Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.010
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.008
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "Debug"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL32UTF8"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
HOSGIP returned value of "FALSE" for HS_FDS_SUPPORT_STATISTICS
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLSt
atistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "identipass"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:identipass
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=873
HOCXU_DRV_NCHAR=873
HOCXU_DB_CSET=873
HOCXU_SEM_VER=112000
Entered hgolofn at 2010/11/18-16:00:16
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/local/unixODBC/lib/libodbc.so"
Entered hgolofns at 2010/11/18-16:00:16
symbol_peflctx=0x7a715450
hoaerr:0
Exiting hgolofns at 2010/11/18-16:00:16
Exiting hgolofn, rc=0 at 2010/11/18-16:00:16
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2010/11/18-16:00:16
Entered hgolgon at 2010/11/18-16:00:16
reco:0, name:identipass, tflag:0
Entered hgosuec at 2010/11/18-16:00:16
Exiting hgosuec, rc=0 at 2010/11/18-16:00:16
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using identipass as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2010/11/18-16:00:16
HS_FDS_CONNECT_INFO = "identipass"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2010/11/18-16:00:16
dsn:identipass, name:identipass
optn:
Entered hgocip at 2010/11/18-16:00:16
dsn:identipass
Exiting hgocip, rc=0 at 2010/11/18-16:00:16
Exiting hgogenconstr, rc=0 at 2010/11/18-16:00:16
Entered hgopoer at 2010/11/18-16:00:16
hgopoer, line 233: got native error 0 and sqlstate ; message follows...
Exiting hgopoer, rc=0 at 2010/11/18-16:00:16
hgocont, line 2753: calling SqlDriverConnect got sqlstate
Exiting hgocont, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgocont.c LINE:2772 ID:Something other than invalid authoriza
tion
Exiting hgolgon, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgolgon.c LINE:781 ID:Calling hgocont
Entered hgoexit at 2010/11/18-16:00:16
Exiting hgoexit, rc=0
Can anyone help me see what I'm missing?

Thank you for your response.
I modified the envs LD_LIBRARY_PATH parameter in my SID_LIST_LISTENERODBC to be:
(ENV="LD_LIBRARY_PATH=/usr/local/freetds/lib:/usr/local/unixODBC/lib:/u01/app/oracle/product/11.2.0/db_1/lib:/
u01/app/oracle/product/11.2.0/db_1/hs/lib")
and bounced the listener, but I'm still getting the same error.
I do not have a lib64 directory in my Freetds installation, but all the files in the lib directory are 64-bit.
Here is a listing of my DG4ODBC init file:
/u01/app/oracle/product/11.2.0/db_1/hs/admin[PPRD]> more initidentipass.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = identipass
#HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_LEVEL = Debug
HS_FDS_SHAREABLE_NAME = /usr/local/unixODBC/lib/libodbc.so
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_LANGUAGE=AMERICAN.AMERICA.WE8ISO8859P15
# ODBC specific environment variables
set ODBCINI=/usr/local/unixODBC/etc/odbc.ini
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
Thanks for your help with this!
Catina

Delayed inbound email between Sonicwall ES300 and Yosemite server

Similar Messages

Maybe you are looking for