Delayed or Non-Responsive Group Chat

Anyone else having this issue?
I don't know why my previous one was removed since I followed all the guidelines but who wouldn't want to cover their mistakes.... right M$?
Anyways I'm on 7.4, the group chat seems to be delayed or never send and recieve messages. Sometimes it just requires me to say something in group chat...... or sometimes it just spins forever to never end up sending or updates me on what the group has said days later...
I could send a letter faster via carrier pidgeon faster than this sends seriously why is this basic issue not addressed?

I have this exact issue. It takes around 3-10 hours to update and/or send chat, which is pretty much 70% of why I use skype for...

Similar Messages

Delay in the Response Group Rining / Call Pickup from another Extension

Dear All,
We have just finished a deployment of Lync 2013 with Sonus 1000 as the Mediation Gateway, we have deloyed polycom VVX 600 phones,
We have two lines E1 and 5 Fxo lines (with same Pilot Number)
I would like the Receptionist to have both E1 DID number and FXO number and her phone to ring when the calls comes from DID line as well as FXO,
I have the below scenario
1) Currently the setup is that Receptionist is configured with the E.164 DID number : (Line URI is Tel:+971XXXX500;ext=500), which work perfectly fine
2) We have added receptionist in Response Group , and setting are (Formal,10 sec , Attendant)
The issue :
1) Call forwarding does not work on Response Group (which is by design it self)
2) When a call comes from the outside to FXO it goes to response group , (there is Music played and the ring on reception is delayed by 2-3 secs) ,
Customer does not want this delay , it should ring immediately with no music,
3) If the receptionist moves from one location to any other location to another , she should have the ability to remotely perform call forward to that extension by simply dialing few codes on the phone ( I already told customer
about PIN based authentication, by customer does like the idea of signing in or signing out)
In DIRE NEED OF HELP,
Regards,
Hasan Reza,

Hi,
Did the issue only happen for IP Phone in Response Group or also happen for Lync client in Response Group?
If the issue only happen for IP Phone, it seems to be an known issue. Please Make sure Lync Server update to the latest version and then test again.
Here are several similar case may help you:
https://social.technet.microsoft.com/Forums/lync/en-US/196375a5-3ae9-4452-acbe-2679a8deef80/delay-when-response-group-calls-are-answered
https://social.technet.microsoft.com/Forums/lync/en-US/70306bf5-fcd3-488a-b6f4-2eee1bcc0457/lync-2010-ip-phone-calls-and-response-group-delays
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Cannot leave non iMessage group chats

Im in a group chat, but not everyone in it has an iPhone so the chat bubbles are green. I would like to leave the group chat but there is no button for it like there is on an iMessage group chat.

Im in a group chat, but not everyone in it has an iPhone so the chat bubbles are green. I would like to leave the group chat but there is no button for it like there is on an iMessage group chat.

Anyone else having an individual message response (to a group chat) sent to all in the group?

I have a new Samsung Galaxy S III and noticed right off in Messaging that when I receive an email sent to multiple recipients, the default tab for response is Group conversation. I changed it to default to Individual messages because my preference is to reply only to the sender. However, I was surprised to learn that my individual messages are being received by all who received the initial group chat. This was not the case with my Charge and I can't find any corrective action I can take to prevent it and it is very annoying. Thanks for sharing similar experiences, especially if you have figured out how to fix it.

Hi -- no one has offered a fix to the problem. I posted a single post for multiple friends with the samsung s3 and who are experiencing the same annoying flawed behavior when responding individually to a group chat. I believe your problem is a bit different but a problem with messaging which seems to indicate a bigger problem with the app and the fact that it is not reliable for its intended purpose. I still want to be able to send an individual message to the originator of a group chat and I want it to ONLY go to the one who originated the group chat. I do not want it going to everyone in the group but that is what happens and no setting or resetting that I've tried has corrected the problem. Thanks for asking.

Non ios users can't receive my message in a group chat

My friend is having trouble receiving my messages when we're in a group chat. The person that isn't able to get the messages does not have an iphone, and she can't get messages from two people who have an iphone 6 and 6+ but can get messages from another friend who has an iphone 5. I've checked all my settings and everything is what it's supposed to be on. Is this an iphone6 problem? Thanks!

I found the fix!
You have to do these things, in this order:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
then:
Go to: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Click on Reset my password
Reset your Apple ID password per the instructions
Voila, you should be able to receive texts from non-iOS users!

Lync 2013 Attendant Response Group - Long Delay - Error ID 45019 LS Inbound Routing

Hello,
We have a customer who's using Lync Server 2013 with Response Groups and the SamRoxx Attendant Client. They are getting an error whereby calls made directly to users come through instantly, however attendants who take a call via the Response Group
get a 10 second delay. We are seeing
Error ID 45019 LS Inbound Routing
User ***@***.com provided a routing document with errors.
Default call handling was applied instead. Merge conflict. Wait total present in both preambles.
Problems with this user's routing documents will not be reported again for another hour.
Cause: A new or experimental user agent my have published a routing document with errors.
Resolution:
Replace the user agent that published the defective configuration.
Has anyone seen this before??
Thanks
Lync Tips Blog - [email protected] - If this post has been useful please click the green arrow to the left or click 'Propose as answer'

Hi tomcotton,
You can try steps below to troubleshoot the problem.
1. Remove the affected Lync user from the Response Group and test whether the error persists.
2. I’m not aware of
the SamRoxx Attendant Client, can you use Lync 2013 client to test and check ?
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SMS messages delayed in Group Chat

I bought a new iPhone 5s 2 months ago and have since often had issues receiving SMS messages on time in a Group Chat. 4 of us in the chat have iPhones, 1 person has an Android, but it was never an issue before buying the 5s. It also happens when I have a perfect signal. Hours later, I will get a whole slew of messages that were sent earlier in the day, so they are somehow getting stuck and it keeps happening. This has not been an issue for other iPhone users in the Group Chat. Does anyone know what might be causing this and how it can be fixed?
Thanks

diesel vdub wrote:
SMS is a carrier feature, contact the carrier to troubleshoot.
I'm sorry but I already replied to her to "contact her carrier".Did you even read my first line?
If you have NOT something NEW to say ,then do NOT repeat what I just said.I am a new member here,you should embrace new members in this community.
Also I have added possible solutions to her problem.
"This only works if the carrier makes those screens accessible, not all carriers do. In the US they are not accessible, except maybe on an unlocked device."
Did she mention where she lives? Did she mention if she got an unlocked device? No. So how you know?
My answer completed every possible question.FIY it is accessible on an unlocked iPhone ,I am disappointed that you didn't know this.
Thank you.
~iChristos

None of the messages in the group chat are showing up

My phone notifies me when someone talked in the group chat but when I click on the notification, it just shows a chat with no one in it. Neither chats show up in my recents. I can't send or receive messages. This just happened today and I'm really confused as to what happened

Ok I just talked to support via chat and apparently this is a known iPhone mobile App issue. This is exactly what he said to me: "I was informed that this issue already have a ticket to our engineers and they are already working on this one. This has something to do with the latest version of Skype for tablets and mobiles. We may release another version of Skype app so once an update is avaialble, update the app on your phone ASAP." Hope this ease some frustration.

Response Group Service stops repeatedly.

Hi,
We have a 3 node Lync 2013 FE pool, running on Windows 2012 R2 Datacenter.
The response group service on all nodes stops periodically at different times. Obviously once all the pool members have stopped this service the Response Groups no longer function. We see the following events in the logs that show the issue:
Log Name: Lync Server
Source: LS Application Server
Date: 1/20/2015 4:07:06 AM
Event ID: 32007
Task Category: (1055)
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxxxx
Description:
The Application Host stopped due to an unhandled exception in the application.
The Application Host received an unhandled exception while running application urn:application:RGS. Exception information: Exception: System.Reflection.TargetInvocationException
> Message: Exception has been thrown by the target of an invocation.
> StackTrace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at Microsoft.Rtc.ApplicationServerCore.EventQueueEntry.ExecutionContextRunCallback(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at Microsoft.Rtc.ApplicationServerCore.EventQueueEntry.InvokeEvent(Boolean executingSynchronously, EventSerializer serializer)
at Microsoft.Rtc.ApplicationServerCore.EventSerializer.ProcessEvent(Boolean executingSynchronously, EventQueueEntry entry)
at Microsoft.Rtc.ApplicationServerCore.EventSerializer.ProcessEvents(EventQueueEntry entry)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
> Source: mscorlib
> HResult: -2146232828
Inner Exception: System.NullReferenceException
> Message: Object reference not set to an instance of an object.
> StackTrace: at Microsoft.Rtc.Acd.MatchMaking.CallHandler.StopQueueTimer()
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.RouteToAnotherQueue(QueueCallHandler currentQueue, QueueCallHandler newQueue)
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.RouteCallOnQueueTimeout(QueueCallHandler currentQueue)
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.OnStateTimerExpired()
at Microsoft.Rtc.Acd.MatchMaking.AgentPresenceManager.OnTimerExpired(Object sender, TimerExpiredEventArgs args)
at Microsoft.Rtc.Acd.MatchMaking.PresenceProvider.EventQueue.OnExecuteWorkItem(QueueWorkItem workItem)
> Source: Microsoft.Rtc.Acd.MatchMaking
> HResult: -2147467261
Cause: Unhandled exception.
Resolution:
Check the events prior to this to resolve the unhandled exception.
Log Name: Lync Server
Source: LS Application Server
Date: 1/20/2015 4:07:06 AM
Event ID: 32002
Task Category: (1055)
Level: Information
Keywords: Classic
User: N/A
Computer: xxxxxxxxxx
Description:
The Application Host has stopped an application.
The Application Host has stopped application RTCRGS
Log Name: Lync Server
Source: LS Response Group Service
Date: 1/20/2015 4:07:06 AM
Event ID: 31207
Task Category: (2001)
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxxxxxx
Description:
An unhandled exception was encountered in Response Group Service.
Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.StopQueueTimer()
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.RouteToAnotherQueue(QueueCallHandler currentQueue, QueueCallHandler newQueue)
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.RouteCallOnQueueTimeout(QueueCallHandler currentQueue)
at Microsoft.Rtc.Acd.MatchMaking.CallHandler.OnStateTimerExpired()
at Microsoft.Rtc.Acd.MatchMaking.AgentPresenceManager.OnTimerExpired(Object sender, TimerExpiredEventArgs args)
at Microsoft.Rtc.Acd.MatchMaking.PresenceProvider.EventQueue.OnExecuteWorkItem(QueueWorkItem workItem)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at Microsoft.Rtc.ApplicationServerCore.EventQueueEntry.ExecutionContextRunCallback(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at Microsoft.Rtc.ApplicationServerCore.EventQueueEntry.InvokeEvent(Boolean executingSynchronously, EventSerializer serializer)
at Microsoft.Rtc.ApplicationServerCore.EventSerializer.ProcessEvent(Boolean executingSynchronously, EventQueueEntry entry)
at Microsoft.Rtc.ApplicationServerCore.EventSerializer.ProcessEvents(EventQueueEntry entry)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
Cause: Internal error in Response Group Service.
Resolution:
Restart the service. If the problem persists contact product support.
Log Name: Application
Source: .NET Runtime
Date: 1/20/2015 4:07:06 AM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxxxxxxxx
Description:
Application: OcsAppServerHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.Rtc.ApplicationServerCore.EventSerializer.ProcessEvents(Microsoft.Rtc.ApplicationServerCore.EventQueueEntry)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
Log Name: Application
Source: Application Error
Date: 1/20/2015 4:07:07 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxxxxxx
Description:
Faulting application name: OcsAppServerHost.exe, version: 5.0.8308.0, time stamp: 0x5050e359
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x3cbc
Faulting application start time: 0x01d033d48b291c99
Faulting application path: C:\Program Files\Microsoft Lync Server 2013\Application Host\OcsAppServerHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b4e25672-a083-11e4-80ce-005056b06583
Faulting package full name:
Faulting package-relative application ID:
I initially though this may be due to AV scanning but this has been disproved. Please assist me with troubleshooting this issue.
thanks
Chris

Hi,
Please make sure CMS replication update to the latest status.
Try to install the latest update for Lync Server and reboot the server.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Non responsive copy and paste in Illustrator CS6

Hello,
Since April we are using the Adobe Design suite CS6. We are experiencing some serious copy and paste issues. When our users try to copy some artwork and paste it into the same image again, it might occur that the system is non responsive to the action performed. Really nothing happens.
This happens in about 50% of the times. The other 50% the artwork will appear within a delay of about 5-10 seconds.
Anyone having similar issues? Of could point us to any working direction?

Hi Alexander,
You can follow the steps in the knowledge base document and try to delete the unwanted to content from the file.
http://helpx.adobe.com/illustrator/kb/copy-paste-artwork-slow-or.html
Hope this helps.
Regards,
Sumit Singh

BBM Group Chat Question

BBM group chat question - from time to time, additional chats show up in our group that have no messages in them. When someone posts in one, the whole group sees it and the admins can delete it, but otherwise they tend to be localized to one or two members and we can't remove them. Is there a way for a non-admin to get rid of one of these chats? My understanding is that if I had started it that I'd be able to delete it but since I'm not the creator I don't have this option. Thanks.

Group chat is not supported yet.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Non-responsive filters in Query Designer

Good afternoon all,
We have upgraded to version 7 but are still using the 3x version for reporting.
We have noted that within the query designer when trying to place filters on certain characteristics e.g Wage Type, Pay Scale Group the report hangs for a long time before bringing back any values for selection. This only seems to be happening within the query designer, when the query is executed we are able to filter on variables with ease, yet these same objects within designer are non responsive.
I've searched on here and for any relevant notes but with no joy, any ideas?
I should also say that also after upgrade we had issues when selecting on these characteristics within the selection screen when running these queries and solved it by changing the Provider Specific Properties Query Exec Filter to Value M Values in Master Data table.

Hello,
We have exactly the same problem. We also upgraded to 7.0 but are using 3.x functionality. Did you solve this problem?
Kind regards,
Bernd Evers

Cusrsor Freezes up and is non responsive- Solution?

I am using a mouse with my newly purchase C2D MBP and still from time to time, getting the non responsive frozen cursor. As far as I can tell, there appears to be no rhyme or reason to this. This is my second computer. First there was an odd low pitch beeping sound coming from the left side near speaker as well as the non responsive frozen cursor. Exchanged the computer for exact same model I have now. No longer have the beep but noticing lately there is still the non responsive frozen cursor problem I had with the original one. The Apple solution as far as disabling track pad really has no relavelance to the problem I am experiencing with my computer as well as I see from others in this discussion. I'm not sure what to do at this point. Any suggestions?
Macbook Pro C2D MBP Mac OS X (10.4.8)

1. Try unplugging the mouse and plugging it back it when it freezes.
2. Note the exact time if freezes and check your system logs in your Console application for clues.
3. Boot from your system install DVD, play around with the mouse awhile and see if you can get it to freeze. This will help determine if it's software or hardware related.
4. You could have some bad sectors on your hard drive. Back it up and do a "Zero all data" reformat. Then clone everything back.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Response Group problems

For the past few weeks I have been struggling with launching response groups and I am hoping someone might be able to help.
Little background on my config –
2 – Frontend 2013 servers (5.0.8308.556)
Sonus SBC1000 voice gateway, 1 PRI
Stuff that works – Direct calling inbound to end users works great!
So here is my problem. I set up a response group with a direct dial number to the outside and assign my people to the group and everything is good.
For about 15mins response groups work great! After about 15mins response groups stop working and calls to response groups are no longer picked up. This also affects chat with response groups.
When I turn on the logging software inside Lync I get these messages when the calls are dropped;
TL_INFO(TF_COMPONENT) [1]3784.356C::04/14/2014-14:24:54.627.018e2f49 (RgsCommonLibrary,RgsLogMessage.ReportMessage:2111.idx(227))
_rgs_message_begin_
Direction: Incoming
From: tel:+15555555555
To: sip:[email protected]
Message: CALLCONTROL: Call declined because CallControl is not started
WorkflowId: 08d328a20de8419caad0dee898586051
TL_ERROR(TF_COMPONENT) [1]3784.356C::04/14/2014-14:24:54.627.018e2f4a (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(0000000000C9D21E)Call is declined because Call Control is not started.
I then simply restart response groups on one of the FE servers and they come back (for a short time) -
Here some interesting events logged in the Lync Server event logs after Response Group Service is restarted –
LS Response Group Service – 31028 - A WorkflowRuntime cannot be started.
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence. Cause: The application has not been properly activated or the Contact object was deleted. Resolution: Deactivate and then activate
the application for this pool.
I am willing to try just about anything to get this to work. Any ideas out there? Thanks for all your help!

Please check if the application server is active(lync control panel--Topology--status--double click your FE SERVER--applicationserver).
If the application server is not started, please start it. If it is started, restart it.
If issue still exist, use following steps:
use following command Get-CsApplicationEndpoint
And check for messages in "Yellow"
Locate the Identity in Active Directory using ADSIEdit
And Delete the "CN" located at the end of the Identity String
And try and add your Line URI or Response Group SIP Address.
Also you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Non responsive firefox & stops in mid sentance in messanger or e-mail. Hour glass shows!

Foxfire VERY SLOW RESPONSE, TO OPEN FIREFOX. ALSO IT WILL SAY fIREFOX NON-RESPONSIVE & A HOUR GLASS SIGN SHOWS UP. i WILL BE WRITING IN CHAT OR AN E-MAIL 7 IT STOPS TYPING, AN HOUR GLASS SHOWS UP & IT WILL SAY NON-RESPONSIVE. i'M AM GETTING UPSET WITH ALL THESE PROBLEMS. wHAT CAN BE DONE??

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> General -> place Checkmark on "Show the Downloads window when downloading a file" -> select Radio Button option2 "Always ask me where to save files"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Delayed or Non-Responsive Group Chat

Similar Messages

Maybe you are looking for