Delayed sound from DVD mov

I have a audigy ZS and when I play a DVD movie the sound is delayed. You can see the persons mouth moving and then the sound starts. Any ideas :-)

I'm having the same problem. I can play the video part of a DVD but no sound. Audio CDs and Windows sounds work fine. Does this mean I'm missing a DVD codec or is there a software setting I'm missing. The Nvidia codec costs money. Is there a free codec that will fix this? This is with Windows XP and Audigy 2 LS.
cruzmisl wrote:
Ok I figured it out. I downloaded the Nvidia codec and it works fine. Shouldn't all the sw be aailable with the soundcard though? I really don't want to pay $40 for a codec I do not have the spdif bypass selected.....
Any ideas?
Thanks,
J.

Similar Messages

HT4437 My Apple Tv will only mirror the sound from a movie I mirrored from my computer, but not the picture.How do I fix that?

My Apple Tv will only the mirror the sound from a movie I mirrored from my Macbook Pro. How do I get the picture?

Do you have a valid credit card associated with the account? If so then I would contact iTunes

Why no sound from DVD drive H/Phone sockets ?

Hello again folks,
Just a little niggle here. I have just noticed that I am getting no sound from my 2 DVD Drive front headphone sockets. One is an MSI the other a LiteOn, both have Headphone sockets and volume controls but not a sound issues forth, even though i have no probs getting sound from my mobo audio outs and the S bracket. Any idea of which box i haven't ticked ??

Interisting case, it must be a compatibility issue.
Test it with other DVD movies, run it with different software, i.e QuickPlay, Windows Media Player, VLC etc.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

No sound from DVD pla

Does anybody have the cure for this problem: - Since installing SOUNDBLASTER EXTERNAL sound card I can no longer hear the sound track from my DVD player

Interisting case, it must be a compatibility issue.
Test it with other DVD movies, run it with different software, i.e QuickPlay, Windows Media Player, VLC etc.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Imac 27" brief mechanical ejection sound from dvd drive when booting up

Hey guys,
Had a quick question. I'm on my third 27" stock 3.06Ghz imac that was replaced yesterday. The good news is that so far it doesn't seem to have any of the problems of my previous two 27" imac's.
There is one thing though. A couple of seconds after pressing the power button to bootup there is a brief mechanical sound from the dvd drive like a quick ejecting sound even though there is no cd in the drive. My first 27" imac dvd drive made the sound but the second imac 27" Imac I had didn't. Is this sound normal? Would be curious to know why two out of the three 27" Imac's I had make that noise.
System profiler says my dvd drive is a:
OPTIARC DVD RW AD-5680H
Would be nice to hear from other Imac 27" owners to see if they have this sound. Peace of mind I guess. Thanks in advance!
Message was edited by: imjoshmac
Message was edited by: imjoshmac

Roger, et al,
Thanks for the prompt responses.
I ran Software Update, but I was already up to date, so there was nothing new to install.
The drive seems to be working fine. I used it to load lots of programs, made some big iDVD videos, and made a DVD of some Quicktime movie files. I can live with this startup sound, but I asked the Apple tech about it and she's the one who flagged it as a more serious problem. So unless someone can steer me in the direction of a home cure, I guess I'll take the young 'puter to the doctor.
Matt

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

Using sound from one Movie in another one

I have one animation movie and I want the sounds from that one on another version of the movie (another file). How can I export or copy these sounds?

Share your Project using SHARE/EXPORT USING QUICKTIME... and choose an audio only codec like AIFF. This will give you a sound file that you can use elsewhere.

No sound from DVD

I am not getting any sound from playing DVDs. Cds and all system sounds are OK. iMac running Leopard. Please help

Check the "Audio output" setting in DVD Player's "Disc Setup" preference.

Can't record sound from DVD player

I just built a new DAW with a Gigabyte MoBo that has the Realtek sound chip on board. I installed an M-Audio external Fast Track Pro connected to the computer with USB 2.0. With the two sound devices I can play Band in a Box (my main band) through the Realtek and out put to my mixer. I then use my Line 6 Pod XT as a preamp to my guitar that also goes to my Behringer mixer. I connect the main out (R&L) from the mixer to the 1 and 2 inputs on the M-audio. I set Audio Hardware setup in AA3 to use the M Audio device for input and am able to record mixer output to tracks in AA3. I tried several configs and this is the only one that I found that works. All is good so far.
I installed a SATA DVD player (Lite on 24x) that works fine, but it plays through the M-Audio via USB, bypassing the Realtek chip, and the sound does not show up in AA3. I'm thinking I need to route the DVD output to the mixer to use the channel that is already set up. I've been trying to output the DVD player through the onboard Realtek but can't find any way to direct it to do so. I don't necessarily need it to play through the Realtek, but I want to be able to record from the DVD player.
So, does anyone have any idea how to direct the output of the DVD player to the sound card of choice? I'm stumped.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

G5 with no sound from DVD's

Here's a strange new problem...
I CAN play a CD thru iTunes.
I CAN get tones for clicks, beeps, etc when I change settings on the Sound Preferences panel.
But, when I work on a DVD Tutorial, I can't get the sound from the DVD. And it's not one DVD... it's several.
What's happened?

I no longer have sound with DVD Player. I checked the audio output setting under preferences - there really wasn't much to select. Audio output was set to System Sound Output (the only choice) and "Disable Dolby dynamic range compression" was not selected. I have a MacBook, OS X 10.4.11. The DVD Player is version 4.6.5, Framework version 4.7.0. Was working fine and then when I tried to watch a DVD that I had been watching the night before, there was no sound. The video part if fine. The DVD is fine on a standard DVD player. Sound is fine using iTunes. Any suggestions appreciated.

No sound from DVD on HP dv9000

Hello. I cannot get any audio when I put a DVD into the combo CD-DVD drive. The picture is fine, just no sound. A music CD plays in the same drive with excellent sound. I downloaded the latest Conexant drivers. Am I missing a key setting? Thanks.

Interisting case, it must be a compatibility issue.
Test it with other DVD movies, run it with different software, i.e QuickPlay, Windows Media Player, VLC etc.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

No Sound From DVD Player

I received my new (refurb.) 15" PB today. Everything works great except I can get no sound from Apples DVD player. CDs, iTunes, system sounds etc. all work correctly. Audo output is set to System Sound Output in DVD Preferences. Using VLC I get DVD sound but lots of dropped frame errors. Any suggestions?
15" PowerBook Mac OS X (10.4.5)

I'm having the same problem. I can play the video part of a DVD but no sound. Audio CDs and Windows sounds work fine. Does this mean I'm missing a DVD codec or is there a software setting I'm missing. The Nvidia codec costs money. Is there a free codec that will fix this? This is with Windows XP and Audigy 2 LS.
cruzmisl wrote:
Ok I figured it out. I downloaded the Nvidia codec and it works fine. Shouldn't all the sw be aailable with the soundcard though? I really don't want to pay $40 for a codec I do not have the spdif bypass selected.....
Any ideas?
Thanks,
J.

No sound from .avi movies in QuickTime

Hi -- I have two questions, really:
1. Why no audio from .avi movies played in QuickTime?
2. How do I install audio codecs?
Thanks!

The AVI container (invented and abandoned by its creator Microsoft) has been abused to no end by poorly informed users and its use should just die and go away as Microsoft intended when they introduced WMP.
Use the Movie Info window of QuickTime Player to discover the audio codec used in the file.
Use a Google search (codec name +Mac) to find a version that works on your OS. Most include an installer.

Playback of sounds from flash movie files in authorware

Ive imported a flash movie file into authorware but the sound
is not playing back. In flash, I created a movie that includes
graphics and sounds. The movie plays perfectly when I open the
flash player but it doesnt play when imported into Authorware. Ive
tried publishing the flash file as quicktime but had a problem with
the handler on my computer. Does anyone have any
suggestions?

If you click the 'Options' button on the Property panel for
the Flash
movie, is the 'Playback > Sound' checkbox actually checked
in the
resulting dialog box?
When published as QT, what does 'had a problem with the
handler on my
computer' mean? Do you have QT installed on the playback
machine? Are
you using Insert > Media > Quicktime?
Erik
dcastil4 wrote:
> Ive imported a flash movie file into authorware but the
sound is not playing
> back. In flash, I created a movie that includes graphics
and sounds. The movie
> plays perfectly when I open the flash player but it
doesnt play when imported
> into Authorware. Ive tried publishing the flash file as
quicktime but had a
> problem with the handler on my computer. Does anyone
have any suggestions?
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Could i play sound from DVD Player to my stereo?

I have iBook with Airpot Extreme card. I want to buy Express station. Is there is somebody who did try to broadcast sound to express station from something different than iTunes? May it is just impossible?

Before you buy one for this purpose, you must realize that you're liable to be frustrated trying to get the audio to sync with the video. In fact, you'll have to use an app other than Apple's DVD Player in order to get the sync halfway close, and even then you'll likely never get it perfect.
VLC is one possibility. You'll need to use the audio delay option with a negative offset to advance the audio ahead of the video a couple of seconds to compensate for the Airport Express prebuffering delay.

Delayed sound from DVD mov

Similar Messages

Maybe you are looking for