"Delayed Write Failed" - iTunes won't read iPod Classic

Having problems getting my fathers xmas present working (80gb Classic).
I have re installed the latest version of itunes, my 30gb 5th gen iPod works fine, when connecting the Ipod classic i get a popup saying "Delayed Write Failed", saying 'failure of computer hardware or nework'. Also 'Unable to save data'.
How can i beat this sucker?

*Disable wite-behind caching*
Right-click on your iPod in *My Computer* and select Properties and then the tab that says Hardware. Highlight the selection that says *Apple iPod USB Device* and select Properties. Under the tab that says Policies make sure that *Optimize for quick removal* is checked.
If you've had one of these errors then it's posible you have one or more corrupt files on your iPod. To be on the safe side you should check the drive for errors thus:
*Checking hard-drive for errors*
Hold Menu+Select for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) .
tt2

Similar Messages

  • Delayed Write Failure, iTunes does not Recognize iPod

    I have a 120gb iPod classic that randomly stopped working yesterday. It would turn on, go to the Apple logo boot screen, and stay there indefinitely. Even when plugged into a computer, it would do this, making it impossible to connect to a computer. I had to manually put the iPod into restore mode (hold center and menu while connecting to a computer), and then use iTunes to restore it.
    When I was restoring it, things were going fine, but once the iPod was restarting itself to finish the update, I started running into more issues. It will go into Connected mode on the actual iPod, my computer will recognize it, but iTunes will not. I then got a bunch of "Delayed write" errors from XP in regards to my iPod. I googled this, and people were saying to make sure "optimize for quick removal" was turned on for the device. I did that, and I'm still having issues. I even retried the restoring process after rebooting my pc.
    Really don't want to have to send it in. Any suggestions?
    Message was edited by: vtech81

    I have had that problem with every regular ipod that i have ever owned. Do you use it in an active environment? I used to use them at my work which is a warehouse. All the bouncing around from running will kill the ipod's little hard drive. I think Apple was wrong in their ads about being able to use them while running. I ended up switching over to the touch because it is flash based memory so it is shock proof.

  • Itunes won't recognize Ipod Classic after update

    I updated my Itunes to the most recent version, then when I plugged my Ipod Classic 120gb in, Itunes would not recognize it and erased everything off of it. When I try to sync it the ipod freezes as well as Itunes and I have to unplug it and restart my computer to get Itunes working again. Does anyone know how to fix this? I know that certain Ipod Touches won't work on updated Itunes, is this the same with the Ipod Classic? I am using a PC not a Mac.
    Any help is appreciated, I'm not very techy so layman terms are appreciated.

    Does this happen no matter what USB port you plug the iPod into? Have you tried using a different USB sync cable to see if that makes any difference? 
    Sounds like there may be issues with your iPod's hard drive. Perhaps it would be worth it to run a disk diagnostic on the iPod's HD to make sure it is still in a healthy condition. See this older post from another forum member turingtest2 on how to perform this test and what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • Itunes won't read ipod touch

    why won't itunes read my ipod touch

    Okay, this may be an issue with your iPod. It is very rare, but the iPhone may have corrupted due to a software glitch or perhaps being dropped etc. In a last-ditch attempt to get it working. You could try reformatting your iPod Touch by going into settings > general > reset and clicking " erase all content and settings". I would do this only if you have backed up your iPod and iTunes before. Once you've done this, re-sync with iTunes, and set up the iPod Touch as a backup of your old iPod-that way all your old content (music, photos and apps) will be reloaded onto your iPod Touch.
    You can also check this out, and see if this helps solve your problem:
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    James

  • ITunes won't read iPod...

    When I connect my iPod to the computer the computer recognizes it but iTunes does not and therefore I cannot update my iPod. I didn't tinker with the software beforehand, unless a Spy Sweeper sweep deleted a crucial component of the process, which I would find hard to beleive. I've tried every troubleshooting method this site has to offer and still no luck. The only clue I have to what the problem may be is that a window displaying the "searching flashlight" icon, searching for Autoplay. I downloaded the Autoplay fixer, then Autoplay, and still nothing. Can someone out there help me??

    Freshman: a links for your to peruse
    XP Eneregy Savings Disable USB Ports
    Windows confuses iPod with a network drive
    iPod missing in iTunes and or Windows, includes 5R's
    Let me know if these don't work and why and we'll try some other things.

  • IPod won't sync, gives 'Delayed Write Failed' error.

    I've had my iPod classic 80gb, for roughly a year now, and I never really had any permanent issues with it, until last week. I plugged it into my laptop and left it on over night. I wake up in the morning and all my songs and videos were gone. iTunes was reading the data as 'Other'. Overnight, without me doing a single thing, everything was gone. I unplugged it and plugged it back in, and all the files were gone. Completely. Space had been returned.
    I painstakingly put my songs back in that afternoon. The next day, I plugged the ipod into my office computer, and tried to sync my podcasts. After syncing about 20 files, iTunes froze. Then a yellow bubble popped up saying 'Delayed Write Failed' after which it wipes out everything I was able to sync.
    I've done everything, from restoring the ipod, to re-installing iTunes to formatting the disk to straight up performing a chkdsk. As i speak right now, my laptop won't boot up after i performed the last chkdsk, which told me i had a bunch of invalid sectors or some other. For one week, I've searched the net and it seems no-one has a solution to this.
    Any help? I don't have an Apple store in my country, and I don't want to believe that i have to get a replacement.

    1st - Sorry I can't help you.
    I also have iPod Classic 80gb and have had no trouble till two days ago (11/08). I connected my iPod and it showed up as a source in iTunes but none of my music was shown. I reconnected it and same thing, I checked for update for iPod but it said it was up to date. I then used iTunes to restore my iPod to factory settings. It went through the process and restarted but after that would never show up as a source in the iTunes window.
    When I connect the iPod to my PC it detects the USB Device as an iPod right way (so it doesn't seem to be a USB Driver issue) but then the "Auto-Play" window shows up and it makes my PC slow way down and then eventually I see the "Windows Delayed Write Failed" error mesage in the task bar. If I check My Computer it shows the iPod as a drive.
    I've done everything listed in Apples Support Page for this, from restoring the iPod, to re-installing iTunes, clearing temp folder and old registry files, updating iPod Service in MsConfig. I have also tried to sync the iPod with my other PC and see the same error so it seems the iPod is corrupted. I don't know anyway to restore factory settings again since it won't show up in iTunes anymore. I've searched the net and it seems no-one has a solution to this.

  • IPod Classic 80g..message 'Delayed write failed?? Will not sync to itunes!

    This message appears when I try to connect to my pc...
    'Delayed write failed. Windows is unable to save all the data for the file J:\ipod_control. The data has been lost. This error may be caused by a failiure of your computer hardware or network connection. Please try to save this file elsewhere'
    Ok..
    A: I know the 'J' is the drive it is assigned too...I have been to admin and changed it....No luck
    B: I have found the actual file in the hidden folders but cannot move it or save it elsewhere as it suggests....
    C: I have reset and at one point factory restored through itunes.....
    D: I have even been into the system start up sequence and set it up for ipod and itunes only.....
    Am I being silly or is there a solution???
    Please can somebody shed some light as to what to do...
    Ta muchly
    Chris

    My husband's 80GB iPod had the same problem a few months ago...turned out it was due to corrupted album artwork. Try unchecking the box "Display artwork on this iPod", close iTunes, reconnect iPod to iTunes and then recheck the box "Display album artwork on this iPod". Once I did that, the iPod loaded perfectly and no more error messages.
    Hope this helps!

  • Ipod not syncing with itunes. delayed write failed message

    yes i know there are already posts with similar problems but i cant find any with working answers...if answers at all. so sorry if this annoys you but im helpless.
    i have a 80gb ipod classic (with the click wheel thing) and whenever i connect it to my pc it comes up on the my computer screen under devices with removable storage. . I can go through files etc as i have disk use enabled but for some reason it wont show up on iTunes. i have had the ipod for about 6-7 months and before everything would work fine. just recently it started playing up and wont appear on itunes. i did the 5 R's thing but no luck.
    also i formatted the ipod and then it shows up on itunes but tells me restore to factory settings...which i follow i let it do everything but then nothing happens and then it doesnt appear in itunes as it said it would.
    oh yh i also get a message pop up out of the task bar saying 'delayed write failed' while the ipod is plugged in my pc is very very slow until the write delayed message shows up. then after this message i get a message in itunes saying ipod was detected but couldnt be identified. something along those lines.
    there is also a file in my ipod sayin metadataneverindex. it is 0kb so could it be that which is causing the problem. as far as i have read here and there that it is for mac but i use windows xp. is this the problem?
    im at my wits end as i use my ipod a lot and would really really appreciate if anybody could help me out.

    Go to iTunes>Store and Authorize the computer. It will say if it is authorized when you try to authorize it again.
    Is the the computer you last synced with? You did not answer that question.

  • IPOD NANO-Windows delayed write failed...

    I just bought an IPOD NANO 4gb yesterday... Downloaded ITunes and have been having problems getting it to SYNC music to my IPOD. It keeps throwing the "windows delayed write failed" error. No other errors present. I havent been able to get any music onto my ipod at all. It freezes up and throws the error at me..then it throws it like every 5 seconds from there on.
    Ive searched and searched and idk what to do anymore! I need music!
    Ive Formatted the IPOD via windows, Restored it Via Itunes.. what else can i do?
    Help me
    MY comp info:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway C3070
    iTunes 7.6.0.29
    QuickTime 7.4.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Apple Mobile Device 1.1.3.26
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 3614F92E2F1F76AF
    Current user is an administrator.
    The current local date and time is 2008-02-08 15:46:27.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce4 MX Integrated GPU
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {A601905F-B0F3-4B9A-AC15-F45D108BC0BC}
    Description: Linksys NC100 Fast Ethernet Adapter - Packet Scheduler Miniport
    IP Address: 67.169.80.83
    Subnet Mask: 255.255.254.0
    Default Gateway: 67.169.80.1
    DHCP Enabled: Yes
    DHCP Server: 68.87.76.13
    Lease Obtained: Fri Feb 08 15:39:24 2008
    Lease Expires: Mon Feb 11 10:13:47 2008
    DNS Servers: 68.87.76.178
    68.87.76.178
    68.87.78.130
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2008-02-08 14:01:53.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.0.29 is currently running.
    iTunesHelper 7.6.0.29 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    JEN'S IPOD (N:\), iPod nano (Second Generation) running firmware version 1.1.3
    Serial Number: YM7350ANV8W
    Bus Speed: 61440
    Message was edited by: Jennifer805
    Message was edited by: Jennifer805
    Message was edited by: Jennifer805

    TrevorQ's idea works great! Thanks! I had already gone and gotten my second nano 4GB and the same thing happened both times after using the updater - called support on first and they had no answer. Thanks a bunch - was starting to lose hope after it happened again on the second one. Must be a problem with the updater 4-23-06 and the newest ITunes upgrade.
    If you have trouble with the right click - after the ipod is highlighted then click on the file menu and play the waiting game again - format should appear in the menu after an extended wait. Good luck all!
    ASUS P4 2.8   Windows XP Pro  
    ASUS P4 2.8   Windows XP Pro  

  • IPod Mini error (Delayed write failed)

    Whenever I update songs to my ipod mini it copys about 43 songs until a delayed write failed error message shows up. I'm not able to copy more songs. Any help would be appreciated.

    I used to get this error:
    http://saltypickles.com/itunes.jpg
    I never did fix the problem... it didn't matter witch USB port I used I would get that error, sometimes after 10 songs, sometimes after 200... I couldn't reformat with it either. When I posted here about it, I was told to try Firewire, unfortunaly I didn't have any Firewire ports. So I fought with it until I got the music on it.. then I left it alone and bought an iMac... not suggesting to buy an iMac, but I am suggesting it could be the USB ports on your computer. Could be there are not fast enuf (such as USB 1) or they may not be powered... are you using a USB port from a hub? or on the front of your computer? Make sure you have it plugged into one on the back.

  • Windows - Delayed Write Failed - NANO

    Here is what is going on with my brand "new" NANO:
    Brand new black Nano 4GB.
    Install most update Itunes.
    Install most update Ipod Updater (2006-03-23).
    Connect Ipod Nano - and open Updater which just freezes with the on screen message "initalizing" and nothing happens.
    Now the minute you disconnect the Nano, then we get the message in the system tray..."Windows - Delayed Write failed" with a bunch of other grabage and then updater says connect Ipod.
    Now here is what I tried; uninstalled itunes and updater 5 times and the same results; used different USB (6 of them) same results, resetted Nano, same result; installed fresh everything on my Dell Laptop just to rule out running 2 Ipods on same machine; same result on the laptop; and so on.
    The kicker is my Ipod Mini works like a champ on this machine with no issues at all.
    I'm lost so the ultimate fix I think will be to take it back to Best Buy where I got it on Tursday and get a "new" one unless someone has a fix.
    Bad Nano, Bad Nano

    TrevorQ's idea works great! Thanks! I had already gone and gotten my second nano 4GB and the same thing happened both times after using the updater - called support on first and they had no answer. Thanks a bunch - was starting to lose hope after it happened again on the second one. Must be a problem with the updater 4-23-06 and the newest ITunes upgrade.
    If you have trouble with the right click - after the ipod is highlighted then click on the file menu and play the waiting game again - format should appear in the menu after an extended wait. Good luck all!
    ASUS P4 2.8   Windows XP Pro  
    ASUS P4 2.8   Windows XP Pro  

  • Windows Delayed Write Failed Message

    Okay, I've had my iPod classic 80GB working perfectly until a couple days ago, when I plugged it in. iTunes froze up, and wouldn't start back up, until a message came from the bottom right service bar saying "Windows- Delayed Write Failed Message, failed to write to G:/iPod_Control, all data erased, hardware" or something of the sort. Naturally, I assumed the worst, went to My Computer, and formatted the iPod, went back to iTunes, it recognized the iPod, however, it refuses to sync anything, bringing the Windows Delayed Write Fail message in the corner, and then it doesn't recognize the iPod. I've formatted, restored, reset the iPod several times now, and this is really getting frustrating. I even did the hard drive check (My Computer, the one that goes in phases or something), and still nothing. Please help! This is really getting frustrating. Thanks!

    *Disable write-behind caching*
    Right-click on your iPod in *My Computer* and select Properties and then the tab that says Hardware. Highlight the selection that says *Apple iPod USB Device* and select Properties. Under the tab that says Policies make sure that *Optimize for quick removal* is checked.
    Alternatively this registry hack appears to let you disable write-behind caching across the entire file system.
    When restoring an iPod it may also pay to use this method to put the data back on in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
    tt2

  • Delayed Write Failed - and now it can't start Windows

    Help!
    I'm in big trouble! I was using my Tecra 9100 (running XP Service Pack 2) and was looking at some of the files I had stored on my memory stick. I selected 'safely remove hardware' and pulled my memory stick out when I was finished. All of a sudden my laptop starts to run slowly and an error message popped up saying 'Delayed Write Failed'.
    This is a first for me, and I don't know why this popped up. I read what it had to say below the error - 'Windows was unable to save all the data for the file \Kaspersky (can't remember the exact name but it was to do with Kaspersky). The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.'
    My laptop became so slow it was unresponsive (although I could move the cursor around) and remained so for 10mins. I tryed Ctrl-Alt-Del, nothing happened. As I could't shutdown Windows, I was forced to hold the power off button for a few seconds to immediately switch it off. Upon switching my laptop back on, I noticed my bootscreen took about 15sec more than before and the blue screen showed up saying 'Windows needs to check your disk for constincency.'
    An hour or so later I logged back into my computer and noticed my cursor was rather jumpy and not as smoothe as before. It just wasn't right and about an hour or so later the same error popped up again and my laptop froze. After another power off, the blue screen showed up again saying 'Windows needs to check your disk for constincency' and this time I waited around 4 hours!
    When it was finally done, my laptop restarted automatically and the blue screen showed up again! This time cancelled the disk check and when straigh to the log in screen. I logged in and noticed the laptop wasn't up to speed as it was usually with the mouse being jumpy still. I decided to restart the laptop only to see the blue screen again.
    I let it go this time and just waited for it to scan. after about 20mins nothing appeared to be happening in the scan so I powered off. Now my computer is seriuosly messed up. When I switched it back on the screen which says Last know good configuration and start windows normally showed up.
    Now no matter what I select my laptop just restarts and says cannot proceed due to corrupt or damaged file in \Windows\System. You can attempt to repair this problem by inserting the Windows set-up disk.' Whats the Windows set-up disk?
    My laptop is second hand and came with no recovery disks ect. and has XP Pro already installed so i dont have disk. what on earth shall i do?
    help will be very appreiciated. thanx.

    Sounds like a mean software crash to me. I understand you need to rescue your data before you delete all your files and proceed with a recovery.
    What I would do in your situation (did it actually some days ago on a friend's notebook), is:
    1) remove the hard drive from my laptop (it's not that hard to do it yourself)
    2) purchase an empty external housing for a 2.5" drive to USB (about 10 US$)
    3) Install the removed drive into that new housing
    4) Backup all my important data at my Office/Friends Computer through the new adapter (you have access to all data areas of the hard disk through USB). Keep the HDD even leveled during this procedure as it might be a damaged drive due to wear and tear of the motor bearing... In such incidents you can hear a changing noise while altering the level of the drive during operation. Maybe you have to keep it in a vertical position to minimize the noises during the final rescue process of your data.
    Finally once everything is restored, I would:
    5) reinstall the Drive back into the notebook (in order to test its functionality) and do a proper recovery-CD installation.
    6) Purchase a new spare drive and have it ready, just in case the old drive reveals as broken.
    This is the easiest and most safe way to rescue your data.
    You might ask yourself: What caused this to my notebook:
    Here are some possible reasons:
    - a Virus/malware/incompatible program (30 % chance)
    - a broken hard disk (does it sound strange (noisy) lately?) (45 % chance)
    - a HDD controller/motherboard problem (10 % chance)
    - bad moment like an instant power loss or another undefined reason (15 % chance)
    Good luck,
    electroch@in
    BTW, my friend was very happy to have his broken 60GB Toshiba drive replaced with a new more silent 120GB Samsung drive.

  • OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad. Suggestions?

    OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad as devices. Syncing was easy before recent iTunes update. Suggestions?

    Are you using the correct cables.  iPod cables look similar, but are not, as they are 1.1 USB cables, where your iPhone and iPad require a 2.0 USB cable.
    Also, make sure you are not plugging your USB cable into a Hub or keyboard USB port, but one directly on the computer.
    You may want to reset the USB ports, by resetting the SMC and PRAM
    HT1411 - Apple Portables: Resetting the System Management Controller (SMC)
    HT1379 About NVRAM and PRAM - http://support.apple.com/kb/HT1379.

  • Why won't my ipod classic synch with itunes in Windows 7?

    why won't my ipod classic synch with itunes in Windows 7?

    I have the same problem with windows 7 and msy ipod classic will not sync...have no access to  thousands of songs and playlists..Help!!

Maybe you are looking for

  • View workflow logs in services for object tab in transaction

    HI All , Is there any settings that need to be done to see the workflow associated witha particular Tcode in Services for Objects  tab. Actually i  want to see the custom workflow logs other than using tcode swi1  . Regards , Sijin K P Moderator mess

  • Changing default value DropDownbyindex in wdinit in view

    Hi everyone, I'm using drop down by index in a view. It has many values but I want to change default value. I think that I have to simulate an action on dropdownbykey like select a value. Can i retrieve the index of an element of nod passing his valu

  • Problem setting an Open Password on an Adobe Interactive Form

    Hi, I'm generating a series of Adobe Interactive Forms using data pulled from R3 via BAPIs.  The PDFs are created without an issue but I want to put an Open Password on them (a password the user must enter in order to open the PDF).  From my reading

  • Find out IBase from Handle (inside BADI_IBASE_SAVE_CHCK)

    Hello, I have to use BADI_IBASE_SAVE_CHCK to save additional data after IBase data has changed. The BADI has the import parameter HANDLE. Does anybody know how I can find out which IBase stands behind this temporary handle? Thanks in advance... Regar

  • IPod not syncing: no help provided online

    My iPod won't sync, and iTunes tells me to reset=, B UT get this: It says I am not con nected to the internet, which I obviously am. Now I'm stuck, with a non-syncable iPod, and a stupid error. Help?