Delaying a service until a kernel module has loaded and "settled"
Hi,
I have a problem: a certain program is started too soon before a kernel module has had time to settle down. That means that the program needs to be restarted manually after each reboot, otherwise it won't detect the hardware.
The service in question is tvheadend (from aur) and the module ddbridge, which I've installed from outside of the kernel tree (since the one in kernel is out of date). That is a beta driver so probably it should settle sooner, but it doesn't.
From the recent boot (and others) I can see this:
$ journalctl -b | grep -i ddbridge
experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
huhti 27 20:25:59 ArkkiVille kernel: ddbridge 0000:02:00.0: enabling device (0000 -> 0002)
huhti 27 20:25:59 ArkkiVille kernel: DDBridge driver detected: Digital Devices Octopus DVB adapter
huhti 27 20:25:59 ArkkiVille kernel: ddbridge 0000:02:00.0: irq 41 for MSI/MSI-X
huhti 27 20:25:59 ArkkiVille kernel: DDBridge using 1 MSI interrupt(s)
huhti 27 20:25:59 ArkkiVille kernel: DVB: registering new adapter (DDBridge)
huhti 27 20:25:59 ArkkiVille kernel: DVB: registering new adapter (DDBridge)
experimental: 1969cdc5388b711e2aef3d1747b5f7dd1cd965f3 experimental/ddbridge: Fix 'inlining failed in call to always_inline ...: recursive inlining'.
huhti 27 20:26:01 ArkkiVille kernel: ddbridge 0000:02:00.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
huhti 27 20:26:03 ArkkiVille kernel: ddbridge 0000:02:00.0: DVB: registering adapter 0 frontend 1 (DRXK DVB-C DVB-T)...
But the tvheadend unit file is run right after the module is loaded at 20:26:00, which is too soon before the device nodes have actually populated:
huhti 27 20:26:00 ArkkiVille systemd[1]: Starting tvheadend...
huhti 27 20:26:00 ArkkiVille systemd[1]: Started tvheadend.
huhti 27 20:26:00 ArkkiVille tvheadend[502]: charset: 71 entries loaded
huhti 27 20:26:00 ArkkiVille tvheadend[502]: CSA: Using SSE2 128bit parallel descrambling
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module eit created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module uk_freesat created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module uk_freeview created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module viasat_baltic created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module opentv-skyuk created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module opentv-skyit created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module opentv-ausat created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module pyepg created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epggrab: module xmltv created
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: loaded v2
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: channels 0
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: brands 0
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: seasons 0
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: episodes 10870
huhti 27 20:26:00 ArkkiVille tvheadend[502]: epgdb: broadcasts 10869
huhti 27 20:26:00 ArkkiVille tvheadend[502]: dvr: Creating new configuration ''
huhti 27 20:26:00 ArkkiVille tvheadend[502]: AVAHI: Service 'Tvheadend' successfully established.
huhti 27 20:26:00 ArkkiVille tvheadend[502]: START: HTS Tvheadend version started, running as PID:502 UID:1337 GID:91, settings located in '/home/hts/.hts/tvheadend'
Restarting the service manually 'fixes' the issue:
huhti 27 20:27:16 ArkkiVille tvheadend[1311]: dvb: Found adapter /dev/dvb/adapter0 (DRXK DVB-C DVB-T) via PCI
huhti 27 20:27:16 ArkkiVille tvheadend[1311]: dvb: Found adapter /dev/dvb/adapter0 (DRXK DVB-C DVB-T) via PCI
huhti 27 20:27:16 ArkkiVille tvheadend[1311]: dvb: Found adapter /dev/dvb/adapter1 (DRXK DVB-C DVB-T) via PCI
Any ideas how to 'delay' the service? Is there a .target or service (or similar) in systemd which can see if the kernel modules have settled down?
Is my only option making a dirty script that will check that the device nodes are there, or hard-coding a delay in the unit file? How would one do that?
Cheers!
Last edited by Wild Penguin (2015-04-27 21:15:44)
A simple way to do that would be to use a systemd timer unit, named '/etc/systemd/system/tvheadend.timer':
[Unit]
Description=Delaying tvheadend start
[Timer]
OnStartupSec=20
AccuracySec=5
Then:
# cp /usr/lib/systemd/system/tvheadend.service /etc/systemd/system
# cd /etc/systemd/system
# vim tvheadend.service
# diff /usr/lib/systemd/system/tvheadend.service tvheadend.service
14c14
< WantedBy=multi-user.target
> #WantedBy=multi-user.target
Edit: The above part is superfluous, sorry, see the next posts
Finally:
# systemctl disable tvheadend.service
# systemctl add-wants multi-user.target tvheadend.timer
# systemctl daemon-reload
This timer will start the 'tvheadend.service' 20 seconds (+~5 seconds) after systemd start time.
To my opinion, this is the easiest way to do that (no udev rule to write with the systemd device unit features which is much more complicated).
Last edited by berbae (2015-04-28 15:13:47)
Similar Messages
-
IPMI kernel modules not loading - no ipmi device
My HP ML110 G5 has a IPMI device that worked but somewhen (I can't say when) it stopped working.
Proof that they exist in th machine with dmidecode:
Handle 0x0025, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries
I quite soon found out that the ipmi kernel modules are not loaded so I tried to load them with modprobe:
modprobe ipmi_msghandler
modprobe ipmi_devintf
modprobe ipmi_si
no error, no response, no modules loaded (check with lsmod).
There are descriptions (http://en.onoclea.com/bits/hp-microserver-remote-access-card-ipmi-on-linux.html, http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux) how to load the ipmi_si module with manual parameters. Tried, no error, no response, no modules loaded (check with lsmod).Zancarius wrote:
Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
# Application
b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
Last edited by airencracken (2012-07-22 17:41:56) -
Kernel modules not loading at boot.
~]$ systemctl status systemd-modules-load.service
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Tue 2014-03-11 18:34:06 CDT; 4min 53s ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 137 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 137 (code=exited, status=1/FAILURE)
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to insert 'vboxguest...
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to insert 'vboxsf': ...
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxvideo'
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxdrv'
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Inserted module 'vboxnetadp'
Mar 11 18:34:06 arch-m systemd-modules-load[137]: Failed to find module 'vbox...
Mar 11 18:34:06 arch-m systemd[1]: systemd-modules-load.service: main proce...RE
Mar 11 18:34:06 arch-m systemd[1]: Failed to start Load Kernel Modules.
Mar 11 18:34:06 arch-m systemd[1]: Unit systemd-modules-load.service entere...e.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
Hint: Some lines were ellipsized, use -l to show in full.
Does any one know how to fix this? AFter a while it became annoying.More importantly, the modules are built for a specific kernel version. So if the kernel gets updated and the virtualbox modules get overlooked somehow, then they are not going to work. You can always rebuild them with makepkg and ABS though.
-
[Solved]Virtualbox kernel module not loaded
I update my system today and when I try to run Virtualbox...
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.6.11-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
I already had this trouble before and this was the fix
# modprobe vboxdrv
But it doesn't work anymore
Any ideas?
Edit: This just get fixed by itself when restaring my PC. Sorry
Last edited by ilq (2013-02-13 02:32:43)fsckd wrote:
rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
Amarildo, see the wiki.
Thanks, it really helped. It's solved. -
Wacom Intuos Pro aka Intuos 5 kernel module not loading
Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
% lsusb | grep -i wacom
Bus 004 Device 003: ID 056a:0315 Wacom Co., Ltd
% grep -i wacom /proc/bus/input/devices
% xsetwacom --list devices
% pacman -Qqs wacom
libwacom
wacom-drivers
wacom-udev
wacom-utility
xf86-input-wacom
Any thoughts?hexadecagram wrote:Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
Are you sure it should work? If you check linuxwacom-announce mailing list, you will see that for your device (Intuos Pro):
- X11 support is added by xf86-input-wacom 0.23.0
- configuration support is added in libwacom 0.8
- kernel support is added in input-wacom 0.19 but isn't in mainline kernel yet - on 28'th Spet Jason said: "We don't yet have support for the new "Intuos" line, but we expect our next release in six weeks' time to include it."
I'd say you have to wait for newer kernel, or try installing input-wacom on your own risk (different thing from xf86-input-wacom). Patch for mainline kernel reached Dmitry Torokhov's input tree - but isn't merged with official kernel yet, even 3.12rc5 still does not have those patches. -
Kernel modules not loading automatically in 3.10?
Hello everyone,
After I've update to 3.10 (I think that that was the problem), my kernel modules seem not to load automatically anymore.
In the past, programs like efibootmgr and Virtual Box worked without a problem, now I have to manually load the appropriate kernel modules (efivars and vboxdrv, respectively) for the programs to work. I've done a quick check and it looks like I also have this problem on a different machine. Is this normal?
Thanks!Thanks for your responses!
Yes, updating went fine and I'm now running linux 3.10.5-1 (also rebooted).
I'm aware that I can load them via modules-load.d, but I though it was neat that everything loaded automatically, and I just was wondering if this is expected behavior. If it is, I would update the wiki and such, but I'm still not sure why they would remove this. (I haven't heard anything about it)
Do you know of any other modules that I can test? That should be loaded automatically?
Thanks! -
Don't have any more details....the loading icon problem happens on quite a few websites, and I am having trouble signing into secure websites, like my bank website...
Don't have any more details....the loading icon problem happens on quite a few websites, and I am having trouble signing into secure websites, like my bank website...
-
[SOLVED] systemd: create a service file that loads a kernel module
Hi, I have a daemon that I want to convert to a service unit of systemd.
The daemon tests if a module is loaded, and if not, modprobes it.
I do not want to load that module at boot up, only if the service is launched.
Is there a "proper" way to add something like RequiredModule=xxx to a service unit?
Thanks!
Last edited by Wasser (2012-09-03 08:58:02)Maybe simply run modprobe with ExecStartPre. The command succeeds even if the module was already loaded.
-
[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.
fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55) -
[SOLVED] Loading Kernel Modules with Options
Hi,
I am trying to load the nf_conntrack_ftp kernel module on boot. I followed the Arch Wiki's article on kernel module loading [0] and created a file in /etc/modules-load.d/ called nf_conntrack_ftp.conf:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
This loads the nf_conntrack_ftp module on boot just fine; unfortunately the module uses the default FTP port (21) and I need it to run on a different port (6621). When I try to dynamically load nf_conntrack_ftp using modprobe nf_conntrack_ftp ports=6621 it loads just fine and according to systools has the port set correctly. However, if I try to set the port anywhere in /etc/modules-load.d/ I always get an error message during boot saying:
Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details.
Looking at the systemctl status message as recommended by the error message on boot doesn't yield anything useful:
systemctl status systemd-modules-load.service wrote:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Sun 2014-02-09 16:46:13 EST; 11min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 287 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 287 (code=exited, status=1/FAILURE)
Feb 09 16:46:13 babylon5 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Feb 09 16:46:13 babylon5 systemd[1]: Failed to start Load Kernel Modules.
Feb 09 16:46:13 babylon5 systemd[1]: Unit systemd-modules-load.service entered failed state.
I have tried to set the "ports=6621" module option in multiple ways ...
1. As part of the same nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:
# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
options nf_conntrack_ftp ports=6621
2. As a separate test.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
/etc/modules-load.d/test.conf wrote:options nf_conntrack_ftp ports=6621
3. I even tried just adding "ports=6621" to the end of the nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp ports=6621
None of these worked. The moment there is "options nf_conntrack_ftp ports=6621" in any file in /etc/modules-load.d/ I get the error message on boot and the kernel module won't get loaded.
What am I missing / doing wrong? Is it not possible to set kernel module parameters on boot? Does nf_conntrack_ftp need to be loaded by the initramfs, i.e. do I need to add the modconf hook to my /etc/mkinitcpio.conf?
Thanks,
Marek
[0] https://wiki.archlinux.org/index.php/Kernel_modules
Last edited by marco1475 (2014-02-09 22:54:26)Raynman wrote:
marco1475 wrote:[0] https://wiki.archlinux.org/index.php/Kernel_modules
Read this again, specifically the section about setting options, paying close attention to directory names.
D'oh! Thanks for pointing that out, what a stupid oversight on my part:
The files that tell the system which kernel modules to load go into /etc/modules-load.d/.
The files that tell the system which parameters to pass to the kernel modules when loading them go into /etc/modprobe.d/.
Now that each file is where it belongs everything works. -
I get this output when I run a script finding all my modules:
agpgart.ko
amd74xx.ko
ata_generic.ko
button.ko
cdrom.ko
ehci-hcd.ko
evdev.ko
fan.ko
fb_ddc.ko
forcedeth.ko
hid.ko
i2c-algo-bit.ko
i2c-core.ko
i2c-nforce2.ko
ide-core.ko
ide-pci-generic.ko
ieee1394.ko
k8temp.ko
libata.ko
nvidia.ko
nvidiafb.ko
ohci-hcd.ko
ohci1394.ko
pata_acpi.ko
pata_amd.ko
pci_hotplug.ko
pcspkr.ko
processor.ko
sata_nv.ko
scsi_mod.ko
sd_mod.ko
serio_raw.ko
shpchp.ko
snd-hda-intel.ko
snd-hwdep.ko
snd-page-alloc.ko
snd-pcm.ko
snd-pcsp.ko
snd-timer.ko
snd.ko
soundcore.ko
sr_mod.ko
thermal.ko
usb-storage.ko
usbcore.ko
usbhid.ko
vgastate.ko
So now what do I do? I am trying to compile a custom, slim, bloatless kernel.
Last edited by haxit (2009-03-01 01:15:01)just few pointers regarding this:
agpgart.ko -- AGP support
amd74xx.ko -- AMD IDE support
ata_generic.ko -- generic ATA driver
button.ko -- power button?
cdrom.ko -- erm...
ehci-hcd.ko -- USB
evdev.ko -- input devices through the kernel
fan.ko -- fan control/readings via ACPI???
fb_ddc.ko -- framebuffer support/info reading module?
forcedeth.ko -- you have an nVidia chipset with an ethernet port, I guess
hid.ko -- human interface device support (mouse, FI)
i2c-algo-bit.ko
i2c-core.ko
i2c-nforce2.ko -- I2C is a serial bus, and has been used for ages. Apparently your chipset needs it.
ide-core.ko
ide-pci-generic.ko -- ??? Not using libata or something?
ieee1394.ko -- got Firewire?
k8temp.ko -- Athlon64?
libata.ko -- the good stuff
nvidia.ko -- you evil sheep, you! (OK, so I use the binary driver, too...)
nvidiafb.ko -- new framebuffer.
ohci-hcd.ko -- USB again?
ohci1394.ko -- Firewire again?
pata_acpi.ko
pata_amd.ko -- drive controller stuff again
pci_hotplug.ko -- for all of the three people with big-iron servers that use it? Or is it good for suspend/resume, or something? I dunno, but I don't put it in
pcspkr.ko -- I disable this one. Only my BIOS should be beeping at me.
processor.ko
sata_nv.ko -- again, nVidia drive controller
scsi_mod.ko -- you need this for all the SATA stuff to work right, I'm pretty sure
sd_mod.ko -- ditto
serio_raw.ko -- *shrug* raw serial I/O
shpchp.ko -- some kind of hotplug thingie?
snd-hda-intel.ko -- you have HDA sound onboard.
snd-hwdep.ko
snd-page-alloc.ko
snd-pcm.ko
snd-pcsp.ko -- same as the main kernel one, I leave it out. Sometimes ALSA likes to make it the default, too, for no good reason.
snd-timer.ko
snd.ko
soundcore.ko
sr_mod.ko -- I *think* this is needed for burners these days. In general, don't skimp in the SCSI support in the config (you don't need tape or media changer support, of course)
thermal.ko
usb-storage.ko
usbcore.ko
usbhid.ko -- HID again
vgastate.ko -- usually a dependency for framebuffer stuff, but I'm not sure beyond that
agpgart.ko -- AGP support
actually this one is potentially a performance culprit when using nvidia drivers. kernel agp is really bad. If you have installed nvidia binary driver, you don't need this one even with AGP card. If you have PCI/PCIE card, this is a waste.
nvidiafb.ko -- new framebuffer.
nope this one is for nVidia Riva128 (pretty old video card)
ohci-hcd.ko -- USB again?
there are three different USB controllers: OHCI, UHCi, EHCI
you can't simply disable one of these. all depends on hardware setup: if you have OHCI and UHCI then you need both. So "again" is not again, but system requirement.
run
lspci -v | grep HCI
to see which controllers do you have
scsi_mod.ko -- you need this for all the SATA stuff to work right, I'm pretty sure
no, you don't. But you need to check your hardware dependencies. I have SATA, and the only SCSI stuff loaded is SG and SD
sometimes you will see several modules which have partially the same name. e.g. firewire or usb or snd. all of these might be required for firewire (Assuming that you are using firewire at all) or sound to work. Sometimes the overlap.
my modules take only 2.6MB:
du -sh /lib/modules/2.6.28.7-slim
2.6M /lib/modules/2.6.28.7-slim
without nvidia driver (this one alone is 7.6MB)
does this speed up kernel? Only to some extend and in fact only particular modules will slow down boot time. In my case PCMCIA is slowing down kernel.
O.k. so what about disk space?
Are you kidding? default Arch kernel modules take 69MB and current disks are what? several (tenths, hundreds) GB? So this is no argument really.
So what about RAM?
You will be much better off trimming down your DM (KDE or Gnome) than kernel assuming that you are using one of these, however even small WM can be trimmed down. These two (KDE and Gnome) are pigs, but you can easily cut some fat without loosing usability.
So why I did this? not to gain anything. Out of curiosity really
there is a lot of tools that may help:
lspci
lsusb
cpuinfo
for example that may help.
Last edited by broch (2009-03-02 15:11:07) -
Kernel module loading error. "relocation error: R_AMD64_32"
I am in the process of porting a stable sparc64 kernel module to amd64 and have run into a road block. When the module loads on amd64 I recieve many errors like the one below.
Jun 25 10:35:09 earth genunix: [ID 370954 kern.notice] symbol :
Jun 25 10:35:09 earth genunix: [ID 780480 kern.notice] value 0xffffffffc008b708 does not fit
Jun 25 10:35:09 earth genunix: [ID 286029 kern.notice] relocation error: R_AMD64_32:
I using Studio 12 and I have used many combinations of compiler flags the latest of which is:
-m64 -KPIC -fast -xmodel=medium
Nothing to this point has solve the problem.
Have I missed something in the documentation? Are there other compiler flags for amd64 that I am not aware of?
Thanksunfortunately, that's the case now. I forgot to say about it:
CC -fast -xtarget=opteron -m64 -xmodel=medium -KPIC -DLEVEL=0 ...thanks for your reply, -
How to communicate wite kernel module
After a kernel module was loaded successfully, how to communicate wite this kernel module like change the status of the kernel module.
In Linux, I can use /proc file to do that. But, In solaris, /proc file is just used for processors.
Now, how can I communicate write my kernel module? Can I use /proc file to do that like in Linux?Hello,
<ul>
<li>forget /proc, the procfs is for process table only on solaris
<li>if the kernel module is "driver" type you can use standard read/write/ioctl ... on block/charcter in dev (see OpenSolaris community and documentation Writing Device Drivers)
<li>there are other types of kernel modules such as streams, filesystems, schedulers ...
<li>the kernel module can export some symbols to see it from mdb (see blog)
<li>...
</ul>
<br>
M.C> -
Lots of unneeded kernel modules loading up
Through trying to get suspend working I noticed just how many kernel modules are loaded on boot up. I've got a quite simple laptop (doesn't even have a cdrom) so really don't need many kernel drivers but I've got irda, loads of sata drivers, firewire, several raid drivers, practically every filesystem I know of (but don't use) etc. I've got hardware detection turned on. Should I get all these modules started up?
I know I can add a !entry in rc.conf but there must be over 80 modules I don't want. Is there anything else I can do?Remove *all* subsystems you do not need. If, for example, you boot from an IDE drive, you should have this in mkinitrd.conf:
# Disable whole subsystems by setting to "1"
REMOVE_IDE=
REMOVE_SCSI=1
REMOVE_SATA=1
REMOVE_CDROM=1
REMOVE_USB=1
REMOVE_FW=1
REMOVE_RAID=1
REMOVE_DM=1
REMOVE_FS=
Enable autodetection:
# Enable auto-detection of HOSTCONTROLlER and FILESYSTEMS (set to "1")
# (NOTE: This is still experimental, so it is disabled by default)
AUTODETECT=1
Specify your filesystem, since autodetect doesn't seem to work for that. If it's reiserfs, for example:
# Define which modules are needed by adding "moduleX moduleY"
# If left empty, all modules are included if they are not disabled above
HOSTCONTROLLER_IDE=
HOSTCONTROLLER_SCSI=
HOSTCONTROLLER_SATA=
HOSTCONTROLLER_USB=
FILESYSTEMS="reiserfs"
Remove other extraneous stuff. If, for example, you boot from an IDE drive but don't use an IDE floppy drive, put "ide_floppy" in the REMOVE_MODULE list.
Also, use the module banlist in /etc/rc.conf. If you don't use IPv6, put the ipv6 module in there. Don't use your PC speaker? put pcspkr in the banlist. -
Kernel panic with ipf and patch 125014-02?
Hi,
After bringing a bunch of Sparc servers running Solaris 10 up to current patch level I've been experiencing strange and unstable behavior. All servers are running with an ipfilter configuration.
One server has been freezing on the network interface at least once every day without any syslog notice. A reboot is the only way up again.
Now today one server (a Internet proxy server) did a kernel panic twice - never seen that before on this server.
It seems like it was caused by the kernel module ipf. And since it has never happend before I guess it could be caused by the IP filter patch 125014-02.
Anyone experiencing something similar and am I on the right track with suspecting this patch to be bad?
Thanks
Kasper
Message from syslog:
Feb 20 14:53:00 ceres unix: [ID 836849 kern.notice]
Feb 20 14:53:00 ceres ^Mpanic[cpu0]/thread=2a10053dcc0:
Feb 20 14:53:00 ceres unix: [ID 340138 kern.notice] BAD TRAP: type=31 rp=2a10053ca70 addr=18 mmu_fsr=0 occurred in module "ipf" due to a NULL pointer dereference
Feb 20 14:53:00 ceres unix: [ID 100000 kern.notice]
Feb 20 14:53:00 ceres unix: [ID 839527 kern.notice] sched:
Feb 20 14:53:00 ceres unix: [ID 520581 kern.notice] trap type = 0x31
Feb 20 14:53:00 ceres unix: [ID 381800 kern.notice] addr=0x18
Feb 20 14:53:00 ceres unix: [ID 101969 kern.notice] pid=0, pc=0x7bb3ad30, sp=0x2a10053c311, tstate=0x80001602, context=0x0
Feb 20 14:53:00 ceres unix: [ID 743441 kern.notice] g1-g7: 0, 0, 2621c, 1aa10, ea0a, 16, 2a10053dcc0
Feb 20 14:53:00 ceres unix: [ID 100000 kern.notice]
Feb 20 14:53:00 ceres genunix: [ID 723222 kern.notice] 000002a10053c790 unix:die+78 (31, 2a10053ca70, 18, 0, 2a10053c850, 1076000)
Feb 20 14:53:00 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000001fff 0000000000000031 0000000001000000 0000000000002000
Feb 20 14:53:00 ceres %l4-7: 000000000181a1d8 000000000181a000 0000000000000000 00000000e85e2018
Feb 20 14:53:00 ceres genunix: [ID 723222 kern.notice] 000002a10053c870 unix:trap+9d4 (2a10053ca70, 10000, 1fff, 5, 0, 1)
Feb 20 14:53:00 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000000018364c0 0000000000000031 0000000000000000
Feb 20 14:53:00 ceres %l4-7: ffffffffffffe000 0000000000f250af 0000000000000001 0000000000000005
Feb 20 14:53:01 ceres genunix: [ID 723222 kern.notice] 000002a10053c9c0 unix:ktl0+48 (b80c, c006, b7f2, 3511, 1a, 82e1)
Feb 20 14:53:01 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000003 0000000000001400 0000000080001602 000000000101aa04
Feb 20 14:53:01 ceres %l4-7: 0000000000000008 00000600009a6e04 0000000000000006 000002a10053ca70
Feb 20 14:53:01 ceres genunix: [ID 562518 kern.notice] 000002a10053cb10 6 (0, 600009a6df0, 4, 600009a6e04, f332, 0)
Feb 20 14:53:01 ceres genunix: [ID 179002 kern.notice] %l0-3: 00000600009a6e14 0000000000000014 0000000000000006 0000000000000014
Feb 20 14:53:01 ceres %l4-7: 0000000000000028 0000000000000005 0000000000000045 0000000000000000
Feb 20 14:53:01 ceres genunix: [ID 723222 kern.notice] 000002a10053cbc0 ipf:appr_check+32c (2a10053cff8, 60002a0ef00, 0, 2a10053d000, 600010ad7b0, 0)
Feb 20 14:53:01 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000600009a6df0 00000600009a6e04 0000000000000000
Feb 20 14:53:01 ceres %l4-7: 000000000000ffff 00000000701734b8 000000000000ffff 000000000000fc00
Feb 20 14:53:01 ceres genunix: [ID 723222 kern.notice] 000002a10053cc70 ipf:fr_natout+248 (2a10053cff8, 60002a0ef00, 1, 600009a6e14, a85a, fffff4e3)
Feb 20 14:53:01 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 000006000115b500 0000060002a0f008 00000600009a6df0
Feb 20 14:53:01 ceres %l4-7: 0000000082e13511 0000000000000001 00000000701734b8 0000000000000001
Feb 20 14:53:01 ceres genunix: [ID 723222 kern.notice] 000002a10053cd20 ipf:fr_checknatout+4a8 (2a10053cff8, 6000115b500, 2a10053d000, 6000106bdf0, 70173388, fc)
Feb 20 14:53:02 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000080000000 0000000000040007 ffffffff00000000 0000000100000000
Feb 20 14:53:02 ceres %l4-7: 0000000082e13511 0000060002a0ef00 0000000000000000 0000000000000001
Feb 20 14:53:02 ceres genunix: [ID 723222 kern.notice] 000002a10053ce20 ipf:fr_fastroute+278 (600036e3000, 2a10053d188, 2a10053cff8, 0, 4, 6000106bdf0)
Feb 20 14:53:02 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000000000000000 000006000106bdf0 0000000000000001
Feb 20 14:53:02 ceres %l4-7: 00000600036e3040 000002a10053cfa8 00000600009a6df0 00000600009a6df0
Feb 20 14:53:02 ceres genunix: [ID 723222 kern.notice] 000002a10053cef0 ipf:fr_send_ip+168 (2a10053d258, 600036e3040, 2a10053d188, 4000, ff, 600009a6df0)
Feb 20 14:53:02 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000040000000 0000000000000000 0000000000000000 000000000000000e
Feb 20 14:53:02 ceres %l4-7: 0000060000b969c0 000002a10053d410 000006000106beac 0000060000aee2a0
Feb 20 14:53:02 ceres genunix: [ID 723222 kern.notice] 000002a10053d0d0 ipf:fr_send_reset+258 (2a10053d258, c006ea0a, 600009a6e04, 600009a6df0, 0, 82e13511)
Feb 20 14:53:02 ceres genunix: [ID 179002 kern.notice] %l0-3: 000002a10053d260 0000000000000000 00000600009a7de0 0000000000000028
Feb 20 14:53:02 ceres %l4-7: 0000000000000006 0000000000000045 0000000000000040 0000000000000040
Feb 20 14:53:03 ceres genunix: [ID 723222 kern.notice] 000002a10053d190 ipf:fr_check+59c (3000, 0, 0, 701720d0, 600022d5900, 2a10053d518)
Feb 20 14:53:03 ceres genunix: [ID 179002 kern.notice] %l0-3: 000002a10053d258 0000000000000001 0000000000000000 0000000000000000
Feb 20 14:53:03 ceres %l4-7: 000002a10053d254 0000000000000000 0000000040009101 0000000000080000
Feb 20 14:53:03 ceres genunix: [ID 723222 kern.notice] 000002a10053d330 pfil:pfil_precheck+6c8 (0, 1, 14, 6000106bdf0, 0, 0)
Feb 20 14:53:03 ceres genunix: [ID 179002 kern.notice] %l0-3: 000002a10053d410 00000600009a7e08 0000060001109900 000006000311b1c0
Feb 20 14:53:03 ceres %l4-7: 00000000700cfef0 0000000000000000 00000600009a7de0 0000000000000800
Feb 20 14:53:03 ceres genunix: [ID 723222 kern.notice] 000002a10053d460 pfil:pfilmodrput+2c0 (60000aee2a0, 6000311b1c0, 2a100538000, 41, 6000106bdf0, 0)
Feb 20 14:53:03 ceres genunix: [ID 179002 kern.notice] %l0-3: 00000000010076e4 0000000000000006 0000004480001600 00000000000007c8
Feb 20 14:53:03 ceres %l4-7: 00000300000b3c80 0000000023800000 0000000000000042 0000000000000043
Feb 20 14:53:03 ceres genunix: [ID 723222 kern.notice] 000002a10053d520 unix:putnext+218 (60000aee490, 60000aee2a0, 6000311b1c0, 100, 60000aee530, 0)
Feb 20 14:53:03 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000000000000000 0000000000000000 00000000000055d0
Feb 20 14:53:03 ceres %l4-7: 000000000000010d 000000007016ba40 000000007bb24418 fffffd5effac8000
Feb 20 14:53:04 ceres genunix: [ID 723222 kern.notice] 000002a10053d5d0 dld:dld_str_rx_fastpath+24 (60001043e08, 0, 6000311b1c0, e, 0, 0)
Feb 20 14:53:04 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000060001069f10 0000000000000006 000006000311b1c0 0000000000000000
Feb 20 14:53:04 ceres %l4-7: 0000000000000003 0000000000000003 0000060001069f54 0000000000001e71
Feb 20 14:53:04 ceres genunix: [ID 723222 kern.notice] 000002a10053d680 dls:i_dls_link_ether_rx+1c8 (0, 0, 133a850, 2a10053d740, 2a10053d748, 2a10053d730)
Feb 20 14:53:04 ceres genunix: [ID 179002 kern.notice] %l0-3: 000002a10053d738 0000000000000000 0000000000000000 00000600008c4940
Feb 20 14:53:04 ceres %l4-7: 0000060001061f80 0000060001061fa8 0000000000000001 0000000000000000
Feb 20 14:53:04 ceres genunix: [ID 723222 kern.notice] 000002a10053d770 mac:mac_rx+58 (6000105fce8, 0, 6000311b1c0, 133c5fc, 0, 6000105fa78)
Feb 20 14:53:04 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000000000005 00000600009a7d40 0000000000000002 0000000000000002
Feb 20 14:53:04 ceres %l4-7: 0000000000000001 0000000000000000 0000060000ac9308 0000000000000000
Feb 20 14:53:04 ceres genunix: [ID 723222 kern.notice] 000002a10053d820 bge:bge_receive+350 (60000e2fe10, 6000098f000, 0, 6000098fb40, 6000311b1c0, 6000311b1c0)
Feb 20 14:53:04 ceres genunix: [ID 179002 kern.notice] %l0-3: 00000300016c6800 00000600009908e0 000006000098f840 000006000311b1c0
Feb 20 14:53:04 ceres %l4-7: 00000300016db012 000000000000012e 0000000000000200 0000000000000040
Feb 20 14:53:05 ceres genunix: [ID 723222 kern.notice] 000002a10053d970 bge:bge_intr+108 (6000098f000, 18e0, 50000002a000000, 1800, 600009908e0, 1a20)
Feb 20 14:53:05 ceres genunix: [ID 179002 kern.notice] %l0-3: 0000000100000000 0000000000000000 0000000000000400 0000000000000002
Feb 20 14:53:05 ceres %l4-7: 0000000000001a20 0000000000006808 0000000000006800 00000300016db000
Feb 20 14:53:05 ceres genunix: [ID 723222 kern.notice] 000002a10053da20 pcisch:pci_intr_wrapper+b4 (300000c21c8, 60000b0b600, 0, 0, 0, 600010172d0)
Feb 20 14:53:05 ceres genunix: [ID 179002 kern.notice] %l0-3: 00000000018d3bb0 00000600009cc580 00000000018d3bf8 0000000000f26e20
Feb 20 14:53:05 ceres %l4-7: 00000300003e0970 000006000098f000 0000000000000000 000000007bb19110
Feb 20 14:53:05 ceres unix: [ID 100000 kern.notice]
Feb 20 14:53:05 ceres genunix: [ID 672855 kern.notice] syncing file systems...
Feb 20 14:53:05 ceres genunix: [ID 433738 kern.notice] [1]
Feb 20 14:53:05 ceres genunix: [ID 733762 kern.notice] 35
Feb 20 14:53:07 ceres genunix: [ID 433738 kern.notice] [1]
Feb 20 14:53:07 ceres genunix: [ID 733762 kern.notice] 28
Feb 20 14:53:08 ceres genunix: [ID 433738 kern.notice] [1]
Feb 20 14:53:29 ceres last message repeated 20 times
Feb 20 14:53:30 ceres genunix: [ID 622722 kern.notice] done (not all i/o completed)
Feb 20 14:53:33 ceres genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c1t0d0s0, offset 430374912, content: kernel
Feb 20 14:53:40 ceres genunix: [ID 409368 kern.notice] ^M100% done: 20967 pages dumped, compression ratio 4.92,
Feb 20 14:53:40 ceres genunix: [ID 851671 kern.notice] dump succeededme too - I'm still waiting for a patch:
Case# 65340046 - panic due to IPF firewall
From: Fletcher Cocquyt
To: <[email protected]>
Date: Feb 12 2007 - 10:09am
We had another panic & reboot, so we will be forced to disable IPF firewall
(is svcadm disable sufficient, or do I need to do more to prevent the
panics?)
How can I be notified when there is a proper Sun patch to fix this?
thanks
-----Original Message-----
From: Fletcher Cocquyt
Sent: Tuesday, February 06, 2007 8:08 AM
To: '[email protected]'
Subject: RE: Case# 65340046
Is it IPF firewall related?
Will disabling ipf (until there is a fix) avoid this bug ?
Thanks
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, February 06, 2007 8:01 AM
To: fcocquyt@
Subject: Case# 65340046
Fletcher,
This system panic'd due to bug 6490522: S10 System panic bad mutex in
ipf:fr_derefrule. Unfortunately at this time we do not have an offical fix
for
this bug, however we do have a test binary built. Please let me know if you
would like to test this binary on this system.
Thanks.
Christine Perrigo
Kernel Technical Support Engineer
Sun Services
http://www.sun.com/service/online
E-mail: [email protected]
1-800-USA4-SUN (option 1, option 1, then case #)
Maybe you are looking for
-
The Ipad disk seem to have been corrupted during upgrade. Is there any way to fix it? I have tried accessing ipad using ssh tools but the ssh_rd_rev04b.jar tool does not support ipad 3. Below log Ipad 2013-12-06 22:51:32.012 [1604:a7c]: restore libra
-
GOT A NEW MULTI ROOM DVR , CANT RECORD FROM MY OTHER STB'S
SO I RECENTLY EXCHANGED MY MULTIROOM DVR SINCE IT WAS MAKING ALOT OF NOISE. I GOT A NEW ONE THE OTHER DAY AND SET IT UP WORKS FINE. MY ISSUES IS THAT I CANNOT RECORD SHOWS FROM MY OTHER STB'S. I HIT THE RECORD BUTTON AND SAYS "MULTIROOM DVR ALERT, DV
-
Can I change resolution of a photo without losing any quality, for Retina ready photos?
Hi there I would like to prepare some photos for Retina display screens (not for printing) and was told that in order to do this, I need to increase the resolution of my images from 72dpi to 240dpi. Many of my original photos are 3000 x 1875 pixel si
-
Bar Code Font 3 of 9 cause NULL pointer exception in PDF export
I am using CR4E 2.0 update 3 and tried to export a report that includes a text formatted with a barcode font (Code39). When I export the report to PDF with the Crystal Reports Desinger it works fine. When I export it in our application it generates a
-
Hi All, I wanted the following information for Accounts Receivable: 1) AR Invoice Payments Infomation: - Company Code - Customer code - Invoice No - Posting Date ( Receipt Date ) - Payment Amount (local currency ) 2) AR Invoice Information: - Com