Delays w garage band live with external USB mike

I'm using an external USB mike into a Macbook pro with garage band running as recommended with monitor on. (Mac's earphone port cabled to input of a Marley "Get together") After anywhere between 7-15 minutes a delay occurs. When initially investigating this set-up, I did notice someone dealing with such delays. Could someone please put me to rights? Bern

It will be a little clearer. Play around with the mic position to see if you can minimize the background sound. I believe the six "ticks" you heard were the count-in. You can turn that off via the Control menu.

Similar Messages

Need to rescue Garage Band Files with Data Rescue II - what kind of files?

Hi all -
After a particularly gruesome computer crash, I am trying to reconstruct my lost files using Data Rescue II..... This program goes into the damaged hard drive and downloads all intact files it can find, but it is NOT able to label everything correctly. All it can do is divide things into folders - Audio files, document files, images, mail, misc., and movies. And within these folders are other folders - for instance, in the "Audio" rescued folder, there are hundreds of AIFF files, AIFF1 files, AIFF2, MP3, WAV, m4a, and m4p files.
My question is: can someone please tell me what the heck a Garage Band project file is? That would save me a lot of time in digging through all this material trying to find one....
(Don't get me wrong... I'm grateful to have stuff to dig through! I just hope my Garage Band files are intact and recoverable.)
Has anyone had success saving Garage Band files with Data Rescue II?
Thanks in advance.

Aaaagh!
I spoke too soon. Yes,I did indeed find the file that contained all the files I needed to retrieve (using Disk Rescue II). When my 6-hour download of the 78 GB folder finished, I check the files again, and they weren't located in the orphaned section, but in the Hard Drive section under the normal directory, in a folder called .Trashes - within that there was another folder called "501", which contained all the Garageband files I needed to retrieve. However, when I tried to open the downloaded "rescued" files, they were inside a folder called "Macintosh HD", which could not be opened, and I got a message that said "Could not be opened because you do not have sufficient access privileges." Not only that, but even after 6 hours of (apparently) downloading the 78 GB folder, my hard drive, which had close to 83 GB of free space, said STILL had almost that same amount.
So did it download anything or not? What was it doing all those 6 hours? I have a file that I can't open, but apparently it's going to be empty anyway.
Here's the full story, for anyone with the patience to listen and offer advice. It looks like now I'm looking for a way to 1) get the permissions to open the .trashes file so that I can download everything, or 2) figure out a way to get Disk Rescue II to open the files and download them regardless of the permissions.
Full Story -
I am pretty sure that my computer crash was caused by working with the newest version of Garageband 08. Ever since buying it and loading it, my computer has been acting funny whenever I use the Garage Band program - I could only record about one in three attempts since the computer kept freezing as soon as I finished recording a line. I would have to use force restart to get going again.
The day the computer crashed, I was working on a Garage Band project, which kept crashing, and I was also using Finale, Microsoft Word, and iTunes -- all of which are my normal procedure and I'd never had any problems with anything before loading the new Garage Band 08. (See my posts on other discussion topics for more details). After the last freeze, the computer crashed totally and could not be restarted - it would get to the gray screen with the spinning gear and just sit there while the fans ramped up to overload.
I used Disk Warrior to rescue whatever files I could onto an external hard drive, and I started to download all the Garage Band files. However, the "estimated time to completion" said over 6 hours , so I stopped the download after a minute or so and went on to rescue all the other files that were smaller in size and easier to download - I figured I'd set Disk Warrior to download the whole 78 GB set of Garage Band files overnight while I slept. But....when I went back to begin the download again, I noticed that the directory of Garage Band files went only to the letter "C" instead of all the way to "Z" like my original files had done during that earlier attempt to download. I am assuming that somehow, the directory for the files I download before aborting the attempt (A-C) got exchanged with the directories of the original version (A-Z), but the original directory was no where to be found.
I decided to try an archive install in the hopes that I could just restart my computer and get the files out by hand. The archive install went fine, and the computer started up fine and got to the log-in screen, which had changed. I now had two blanks - one for user name and one for password, instead of the choices of names. I tried all my user names and passwords, and asked my wife for her names and passcodes, but nothing worked. The computer had apparently re-set all its permissions and User accounts. I tried using Disk Utility to reset the password in its opening screens, but instead of getting several User options, the only one it allowed me to attempt was "System Administrator (root)", and even that wouldn't let me in to change any passwords.
That's when I downloaded Data Rescue II, which does seem to do a good job of locating lost files. However, since I didn't have permissions to open the computer the last time, I am still apparently facing the same thing when I try to access files copies OFF the computer.
So I'm not out of the woods yet. I can see the files on the Data Rescue screen, but I don't know whether they have permissions tied to them or not, and if they do, whether the system would let me since I don't know what the passwords and user names have defaulted back to.
Any advice? Please?

Can Garage Band play an external MIDI synth?

Can Garage Band play an external MIDI keyboard?
I have an external MIDI keyboard/synth.
In Garage Band Preferences I’ve set Input Device and Output Device to my external MIDI keyboard.
I can play the external keyboard with Garage Band in Record mode and it records just fine.
However, when I select Garage Band to play, nothing plays on the external keyboard.
I can set the Output Device to Build-In Output and Garage Band plays the software synth on my computer just fine.
Can Garage Band play an external MIDI keyboard?
-Mike

Thanks lenoie
What I'm hoping for is for Garage Band to send MIDI out to the external keyboard.
Does anyone know if Garage Band can do this?
Thanks :-)

P67A-GD65 (B3) will not boot with external USB DVD connected.

Damnedest thing... just put the build together last night and this was the biggest issue. If I connect my external Samsung USB DVD RW the system stops booting and only displays (B3) in the bottom right corner of my display. If I remove the USB plug the system boots and operates normally. If I connect it to the USB port after boot the system recognizes it and it works fine. The same issue occurs no matter which USB2/3 port I plug it into. I've banged around the BIOS and cannot see any issues in the boot sequence that would indicate an issue. Anyone else in das same boot?

Quote from: cadhopper on 24-March-11, 07:19:08
I just came to the forum for the same reason. I'm glad you had a thread already going. Mine is a Seagate 1.5T USB 2.0 hard drive and the screen reads 98 in the lower right corner. Hopefully MSI will get this fixed soon. Other than that the new system is running great.
They are working on it. They sent me a BETA BIOS to try out. The BIOS v1.10B3 was dated 3-17-2011 and it nearly bricked my system though. Here is the response I sent to them the other night after a few hours with a massive headache trying to bring my system back up:
Quote
Tried the new BIOS. While it did indeed fix the USB DVD boot issue and let me boot into windows it created a few new issues. After flashing the new BIOS would not recognize my old overclocking profiles from the v1.8 BIOS.. "hole" error. So I manually adjusted all the settings and saved the new settings. I copied them EXACTLY from my previous settings.. I had screenshots which I had printed out as a fool-proof guide. After rebooting I could no longer get into windows. BSOD. If I tried entering the BIOS by tapping the DEL button while booting the system would freeze at the "entering setup...." screen and never progress into the actual BIOS. I unplugged the power, waited a few minutes and held the clear CMOS button on the back panel down for a few seconds. After rebooting I no longer had video output. After much trial and error I ended up having to also unplug my LCD and cycle power on it as well to get video back. But could still bot get into the BIOS by tapping the DEL key during boot. Luckily I have a laptop with all the files on it and I was able to finally re-flash back to the v1.8 BIOS from a USB drive. I'm not sure what exactly you changed.. but I don't think this new BIOS version should leave BETA status.
To their credit they promptly responded the next AM:
Quote
There were some changes to the CPU voltage, so your overclock settings may not work properly. We are still working on a 1.A release version. It will be updated to our website soon. http://www.msi.com/product/mb/P67A-GD65--B3-.html#/?div=BIOS
I only wish they had informed me of the changes to the CPU voltage up front or included a change log so I could have made an informed decision as to whether or not I wanted to try the BETA BIOS. I was under the impression (mistakenly) that it simply addressed the USB DVD issue. I'll wait for the new release BIOS. I can live without the external USB DVD being plugged in at boot. Bricking my MOBO and having to RMA would be a far less desirable outcome. :p That said.. I'd still recommend this MOBO. It has relatively few issues and MSI support is responsive so far.

Garage Band : M Audio Duo USB Midi... signal in yes, audio out no

Dug my M Audio Duo USB Midi out of the closet and trying to lay some tracks in Garage Band, but problems. I could use a hand. When attempting to record...
- OK: Garage Band recognizes the device and I'm able to 'seemingly' record audio (from external mic via midi device)
- NOT OK: I'm not able to 'monitor' via line out through Mac - headphones plugged into Mac (line out through midi is okay, but only picks up native signals, not tracks from Garage Band)
- NOT OK: Also, replaying the track doesn't produce ANY sound (despite the track showing a signal)
Any ideas? Is M Audio Duo compatible - it's pretty old piece of hardware.
Cheers!

First you are not using MIDI you are recording Audio that has been digitized.
If you can't hear the playback through the interface make sure you choose the interface as your output device in garageband preferences and you have the mix knob on the interface set to the playback/return side.
I just looked at the interface and it doesn't seem to have any mix knob try toggling the stand alone mode button.
Message was edited by: isteveus

MacBook Air 11-inch, Mid 2013 won't boot with external USB keyboard

Hello,
Just bought a MacBook Air 11-inch, Mid 2013 (8GB, i7, 512GB SSD) today.
All available software updates are installed (OS X 10.8.4 (12E3067)).
Also have a Macbook Pro Retina.
If I connect a external USB keyboard (Kinesis Advantage Pro USB) to the Air then it don't boots.
If the keyboard is connected directly to the Air USB port then it don't shows the Apple logo on grey background after power on, just give a endless loop of the turning on sound.
If the keyboard is connected to the Thunderbolt display then same empthy grey screen after power on and no sound at all.
The same keyboard and Thunderbolt display work well with my Macbook Pro Retina and a Macbook Air 2011.
Any ideas ?
Thanks,
Karsten

I like it very much. I use it on my iPad (and occasionally my iPhone). I'm kind of a keyboard snob actually. I tried the Apple wireless keyboard first. Apple keyboards have a short throw that hurts the tips of my fingers. They're very pretty but the on button turns on when I don't want it to and my iPad wakes up in my bag. Strike 1.
I went to a little keyboard called the Joy and it had a positive switch so I didn't have the wakeup problem. It worked well though after several months I wore it out and had to replace it with another one. I also didn't like how flat it sat and used rubber bumpers on the back. It too had a short throw that hurt my finger tips after a while but it was better than the Apple.
Then I discovered the Logitech bluetooth keyboard, the K811. This is a great keyboard. It switches between multiple targets with one press, it has a positive on/off switch, the keys light up, it's rechargeable and lasts a long time, and the slight cushioning on the keys keeps my fingers from hurting. I put the rubber bumpers on it though like the Joy because I like the keyboard to sit up a little. It's a tiny bit bigger than the other keyboards but I like it a lot, better than my MBA keyboard and better than my iMac wired keyboard. I'm trying out an after market keyboard on the iMac now but I'm thinking about switching to one of these for the iMac.

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

Can I use Garage Band JamPacks with Soundtrack 1.5?

Can I buy Garage Band JamPacks and use them in Soundtrack 1.5, with full functionality? Like genres, styles, mood, etc...
The reason I ask is because the website says they work with Soundtrack Pro, but doesn't mention 1.5.
Thanks!
--Aaron

hey there,
yes, you can.
Browser tab >Mac HD >Library >Audio >Apple loops >Apple Loops for GarageBand, SoundTrack & iLife Sound Effects. pick one of the 3. also if you have user loops you can access them & also i think put some GB loops into Favorites tab.

Garage Band audio with digital AV adapter

When I connect my iPad 2 to the TV via the optional HDMI digital AV adapter, the audio signal from most apps and system sounds is transferred to the TV via the HDMI link - ie I can hear the audio on both the iPad and the TV. The exception is with Garage Band - the audio from this app does not seem to export to the TV. I've searched in the General audio settings and the audio set up of Garage Band, but I can't find anything related to this. Surely there must be a way of configuring this great app so the the audio is exportable?

You need to turn on the 'AirPlay-Bluetooth-HDMI' option in setup within GarageBand. Then it will work.

Aperture 2.1.1 Vault problem with external usb disk

I have just updated to 2.1.1 and now Aperture freezes every time I connect my usb external disk and try to create or update a vault. I have to force quit Aperture and remove the disk before I can use Aperture again. The only way I can create a vault is to create it on my internal disk then manually copy to the external usb. Another topic here suggested the problem is with network disks but I have a very similar problem with a local usb disk. I have tried two different disks with the same results. All my software and os is up to date.
Does anyone else have this problem?

I have a similar problem, and have a not totally satisfactory fix for my issue.
I have my photos stored on an external FW drive.
Originally I also stored my vault on the same drive.
When I started Aperture with this config then Aperture would not pass the loading screen. I would have to kill the process to quit.
If I started Aperture with the FW drive disconnected then it would launch, but I would then attach eth FW drive and have to Manage referenced files.
What has worked for me:
I have removed the vault from the FW drive and Aperture now boots quickly as 2.1 did.
I have to create the vault on the internal HD and copy to the external.

Where can I purchase garage band compatible with os 10.6.8

My imac has os 10.6.8 and cannot be upgraded. Where can I purchase garage band that is compatible with os 10.6.8?

If in addition to garageband you want the full version of iDVD (if you no longer have iDVD on your Mac), then purchase iLife '09 from a source like Amazon.
In addition to GarageBand, if you do not need iDVD or, at least not the full version of iDVD, then purchase iLife '11 from Amazon.
When you install, you need to do a custom install to only install GarageBand alone, and/or install both GarageBand AND iDVD

Using Final Cut with external USB 2.0 drive

I use Final Cut Studio on a 2-year old MacBook Pro. The MacBok Pro has Firewire 800 and but only USB 2.0. I've been using an external Firewire drive with it for storing my movies. Now it is full and I need to get another external drive. However the new drives I've seen tend to be only USB.
My question: Will it be a problem to use Final Cut using USB 2.0? (The new drives are USB 3.0, but the computer is only 2.0). Will I be able to edit movies that are on the extenal drive? Or will I need to store the "in-progress" movies on the computer, and then move them to the external drive when I'm done with them.
And when I ask "will I be able to" I mean doing it without seeing endless beachballs...
(Also, if the response is "get another FW drive," then any suggestions as to which one?)
Thanks!
Dan

DanK wrote:
Let me make sure I understand this: If I store completed movies on the USB drive, I should have no problem viewing them, as long as I have no other external USB devices connected to the MacBook.
You can use the USB drive for archiving projects but as said before you shouldn't edit with one. While the nominal maximum speed for USB 2 and FW400 is not that far apart the two protocols work differently. USB 2 achieves the max speed in "bursts" which is not what you want for video.
DanK wrote:
However for editing movies, I should have them on either the FW drive or on the computer itself.
Is that correct? Will it work to edit movies on the FW-400 drive, or should they be on the computer itself?
While you can have the project file itself on your system drive, all the media files should be on external drives. This way your system drive gets to run the software and the external keeps the media and renders.
DanK wrote:
And if I get a new FW-800 drive, will I be able to edit movies stored on that (i.e. will I see a difference between FW-400 and FW-800?)
FW800 is definitely faster. See a comparison here: http://www.barefeats.com/hard70.html

[SOLVED] Problem with external USB drive started yesterday

My system freezes for about 65 seconds at the login screen. After 65 seconds, I can login and everything is normal afterwards.
I discovered that I can eliminate the freeze by disconnecting the external USB drive from the PC. Here are the error messages from kernel.log when the drive is connected:
Oct 15 23:10:14 localhost kernel: [ 17.035091] usb 1-1.3: device descriptor read/64, error -110
Oct 15 23:10:29 localhost kernel: [ 32.155955] usb 1-1.3: device descriptor read/64, error -110
Oct 15 23:10:29 localhost kernel: [ 32.325394] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Oct 15 23:10:31 localhost kernel: [ 34.045126] MediaState is connected
There is supposed to be a kernel boot option (irqpoll) to prevent this from occurring. However, that option seems to no longer work for kernels after 2.6.39. If I try using it with Arch, the system will not boot, saying all the CPU's failed.
I also don't understand why this just started happening yesterday, as the USB drive has been connected to the PC longer than I've been using Arch. Also, my kernel has not been updated since I installed Arch on Oct 8.
Does anyone know another fix or workaround for this problem?
Thanks,
Tim
Last edited by ratcheer (2011-10-17 01:30:08)

Problem solved
I feel stupid, but I also feel better. I turned off the PC, disconnected the power from the USB drive for about 15 seconds, reconnected the power, rebooted, removed the irqpoll kernel option, and Ubuntu started, perfectly. I need to learn that the USB drive just goes freaky sometimes and remember to do this. But, this is only the second time I've had to do this in months of use.
Tim

Soundblaster live! external USB vs. Able

Hallo,
ich habe folgendes Problem:
O. gen. Soundkarte benutze ich mit Ableton. Das Problem: trotz aller ausprobierter Einstellungen nimmt die Karte die ganze Zeit "sich selbst", also den kompletten Ausgangspegel auf. Was soviel hei?t wie: Will ich nach Aufnahme der ersten Spur die zweite aufnehmen, wird die erste erneut mit aufgenommen; selbst das klickger?usch der Maus im Browser wird mit aufgezeichnet. Selbst mit einem neuen ASIO-Treiber klappt's nicht. Ideen?
*solestar

Hello,
I'm using the Soundblaster li've! external USB with Ableton li've. The problem is: I always record the out signal again when I record a second track. Even the clicks of the mouse will be recorded. So - how can I isolate the out signal (phones) from the in signal (line in)? Ideas, anyone?

Satellite M300: speach recognition works only with external usb hub

Hi All
I have the Satellite M300 which I was able to operate the speach recognition program prior to having the motherboard replaced due to the usb's failing.
I have found using the headset I cannot achieve high enough quality to operate it.
The only way I can operate the speach program is use an external usb hub with its own power supply.
Would the problem relate to the audio card or just simply not enough voltage?
And is there na fix?
Cheers
Craig

Hi
The notebooks USB ports provide a standard power of 500mA.
As I said this is a standard but in different cases the external 3rd party USB devices need more power.
For example one of my external USB 2.5 HDDs must be connected to two USB ports at the same time to ensure that the HDD would get enough power to work properly.
Your external card is not known to me but possibly it needs more power as usual.
Greets

Delays w garage band live with external USB mike

Similar Messages

Maybe you are looking for