Delegate "New-MoveRequest" permission to users (not administrator)

Hi,
We're currently using Exchange in hybrid mode. I need to delegate the possibility to users (in IT department) to move mailbox from Exchange On-Premise to Exchange Online.
Everything goes fine when using the function "New Remove Move Request" in Exchange EMC as administrator, or when running the cmdlest new-moverequest -Remote as administrator.
What I'd like is the possibility to allow users of the IT dpt to use this function (either from EMC or powershell) without them beeind administrator. Is it possible to delegate this authorization ?
Thanks for any help/advice/solution !
regards

Hi ,
Please have a look in to the following blog .
http://technet.microsoft.com/en-us/library/dd638132(v=exchg.150).aspx
Note : As an additional info ,You can also try with creating new RABC group with customized management role .Please try with the below mentioned commands in your test environment first before you get in to production .
Command 1 : $FormatEnumerationLimit = -1
Command 2 : Get-ManagementRoleEntry *\new-moverequest | fl
From the above output you will came to know which management role has to be added on the newly created RABC group .
Command 1 is used to view all the parameters in exchange management shell
command 2 is used to get the required management role which has to be linked on new RABC group to manage mailbox moves.
How to create the customized RABC in exchange 2013?
http://blogs.technet.com/b/nepapfe/archive/2014/02/05/create-a-custom-admin-role-for-exchange-using-rbac.aspx
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

User not administrator

Trouble installing the update to iTunes 11.1.0.126
I first received errors when running the installer that I was not logged in as an administrator and did not have proper rights to the C:\Program Files (x86)\iTunes directory. I attempted to change the rights...now I have a big mess on my hands.
What's up with the installer? I am right-clicking, "run as administrator" also.
Now I'm getting an error that I cannot complete the installation.
I'm lost here and desparately need help.
johnsoncm

Did you install the maintenance service properly in download and install updates in the background?
*Tools > Options > Advanced > Update: "Use a background service to install updates"
*https://support.mozilla.org/kb/what-mozilla-maintenance-service
If updating Firefox isn't working properly then this could be that the maintenance service isn't installed and enabled properly or not allowed in security software.
The maintenance service can be uninstalled separately, it shows up as a new item under add/remove programs.
You can try to uninstall and reinstall the maintenance service as a user by running the installer file in the Firefox program folder.
*maintenanceservice_installer.exe

Setting PC Time and Date as a User, not administrator

Good Day,
I'm trying to set the system time and date as a user. Currently running a hardware time server keeping the clocks on the network at the same time. The time is requested from the time sync server at the start of a DAQ run. This is to ensure every computer recording data has the same start time. We are currently changing network permissions and need to make a user run the software. User privelidges don't allow us to change the system time. Is there a way to allow a User to change the system time, or is that left to the Administrator only?
This function is already implimented on the administrator account and works successfully. Any information would be most appreciated.
Thanks

P.C. was mentioned earlier so I will jump in and assume Windows....
If the system is (made) a member of a Window administrative domain then all this is already in the box, and should be part of a well managed system (I have managed it on a workgroup as well, see the articles below for details). It's one of the things I try to promote as we often have systems switched on for hundreds / thousands of hours and knowing when some guy accidently switched it all off is realy usefull It helps with problems / events that occur outside our control and assists tracking down problems and stops drift / skewing of data.
Check out the following articles for more information: -
Basic Operation of the Windows Time Service
http://support.microsoft.com/kb/q224799/
Registry entries for the W32 TimeService
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q223184
Windows 2000 cannot set the correct time when it connects to multiple NTP servers
http://support.microsoft.com/?id=837196
The time service is included on Windows XP as well. For NT4 there is / was a toolkit that allows operation from Microsoft.
Use the command NET TIME /? (on W2K and XP)
Either way you will come accross problems at the firewall if you want to get to an external time source. Unless you have on of those nifty little black boxes that pick up a radio signal from one of the available time sources.
I like Dennis Knutsons idea because you can't always get IT's attention, sometimes they need a little help, thanks again Dennis for another good tip.

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.

User iPod is not administrator

I changed operating system of my Windows PC from XP to Windows 8 and installed iTunes. Since then I can't synchronize my old iPod Classic with my iTunes library under W8.
Diagnostic test says: Present user is not administrator. Maybe this is cause of problem.
It is true that under Windows XP the administrators name of my PC was ADMIN and the name of my iPod was iPod of ADMIN.
Now under W8 the name of the administrator and single user of my PC is WXYZ. In iTunes I changed the name of my iPod in iPod of WXYZ but it didn't help. I still can't synchronize. Pressing the synchronize burtton in iTunes gives no action.
N.B. iTunes and Windows show my iPod.

Solved problem myself. In iTunes select device (iPod of WXYZ), select tab Music, choose Synchronize Music (complete library). In about 15 minutes complete library in iTunes (5887 items and 10 new playlists) were synchronized.

New-moverequest - target user already has a primary mailbox

I used prepare-moverequest and ADMT to copy/migrate user accounts from a source to target domain. The source domain accounts were disabled and all usres log in with their target domain accounts. Computer accounts were also migrated to the target
domain. But mailboxes were kept in the source domain for now as linked mailboxes. When I run new-moverequest to move the mailbox from source to target domain it says "target user already has a primary mailbox". How do I correct this?
Do I need to convert the mailbox back to user from linked?

Hi
You need to run the New-MoveRequest command in the target forest not the source. If you aren't able to log on directly to a server in the target then you can run this via remote powershell.
http://technet.microsoft.com/en-us/library/dd298174.aspx#Rem
Cheers, Steve

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

I re-set password using specific user ID but when I put new password in it does not say incorrect password it just spins and spins never accepting it. What is the problem?

I re-set password using specific user ID but when I put new password in it does not say incorrect password it just spins and spins never accepting it. What is the problem?

Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

Not Administrator user see uncorrect data

Hi,
i've a problem. I've developed a report in BI Publisher. If i access with Administrator user, i see correct data, but if i access with user not belonging to Administrator Group i see uncorrect data. The query in two scenarios is the same. Is it a problem of particular user? A problem of row security level? Can you help me?
Thanks

Hi Akshay,
We have also compounded object(Credit Control Area and it is a authorization object) of Customer Credit Management,and we included
Credit Control Area in Free characteristics and Customer Credit Management- Customer credit limit in Row area (which i am facing problem)
Thanks
Mohan

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop. Media content (track names, etc.) do not load. Thanks

See Re: itunes 12 track names not found and user not registered for online use.
tt2

I have a new name and I can not verify my account. How do I validate the user name?

I have a new name and I can not verify my account.
How do I validate the user name?

Hello lirom12,
Check out the article below to get your Apple ID verified so you can use it. You would need to send an email to get it verified.
If you didn't receive your Apple ID verification or reset email
http://support.apple.com/kb/TS5404
Regards,
-Norm G.

New role in CUA user record not getting pushed to child system

I added a new child system to our CUA setup. I've confirmed that the RFC connections from both sides are working properly (test connection succeeds) and I've successfully completed the user transfer function in SCUG. All exisitng roles assigned to the users in the child system are now appearing in the CUA central system as expected. I added a new role to a user via SU01 in the central system to this child system, but when I go to the child system, it does not appear in the user's SU01 record. Any ideas why this would not be syncing properly?
Thanks,
Michael

Hi,
Whenever you create a new role in child system, it has to be sync up with the central system.
To sync up with the central system, login to central system goto su01>enter any user name>go to roles tab- click on Text comparision from chiled system. Its navigate to another screen, there you have to mention the child system and click on execute. it syncs up with child sytem. Hope it will help you out to resolve the issue.
If still you are getting the same issue login to the central system.. goto SE38-- enter the program name as "RSCCUSND" and click on execute there mention the user name and the logical system id of the Child system name, select the parameters which you wanted to distribute to child system and execute it.
Best Regards
Mani

New link in end user menu does not display

I am new to IDM and am trying to add a new link on the user Welcome page. I have added the link in the End User Menu using the BPE and the XML looks ok. I have saved the changes to the repository; but, the new link does not appear in the list on the user Welcome page at next login. Can anyone point me in the right direction? Thanks.

End User Menu would be the right place to put this. Since you're able to see your link in the BPE browser, I think you're off to a good start.
Did you use the BPE to commit the form change to your production repository? If so, try saving your change as an XML file first and then import the form from the Configure->Import Exchange File menu.
Is it possible your browser settings are caching the page? I've never seen this happen, but it might be a factor.
Jason

ICAL will not let me Accept or Decline new Invites from outlook users

Hi using Ical with mobileme new calender. Ical will not let me accept or decline any new meeting invites or change and updated invites sent to me.

So as the owner of a 140 year old brand who appreciates just how important it is to continue satisfying your customers, I have to wonder just how long will it take for Apple to lose the loyalty of its raving fans?
I love my iPad . . . except that it won't work with Adobe Flash which makes it kind of useless for many sites that I visit.
I love my iPhone, unless I actually want to use it outside of my home (Cincinnati is always 10 years behind, and our AT&T network is all but downtown for large parts of the day).
And I love my iMacs, so much so that I paid big bucks to integrate it into my office network (I am the CEO, so I can do that) and convinced my wife, mother and mother-in-law to switch from PCs.
Life was grand, integrated, happy!
And now, the MobileMe upgrade, which tried (unsuccessfully) to force me to Snow Leopard (I was able to complete the upgrade manually); then refused to work with Google Calendar (annoying, but I switched my wife's calendar to MobileMe and eliminated the need for Google Cal); but now, I cannot get Outlook notifications to work. Really?
If Apple is going to now be **** bent on making sure that their products are completely incompatible with Microsoft and Google, then I may have to switch back. I understand that Windows 7 is much better than the old XP that I gladly left behind. My cousin has an Android phone which appears to work great. There are now a plethora of new tablet PCs running Android that all appear to be great. And my wife was happy with Google calender and Google Docs, so maybe technology has finally evolved to the point that we no longer need Apple, Steve Jobs or his arrogant my way or the highway brilliance any more.
It is a sad day. I loved Apple. I admired Steve Jobs. But frankly, I feel that my loyalty is being taken for granted by an arrogant company that no longer gives a **** about its customers wants and needs. I NEED Apple devices that can work and play nice with Google, Outlook and Adobe Flash. And Mr. Jobs, if you are too **** proud to deliver this kind of functionality to your customers, the day is fast approaching (and may already be here) when I can find other companies that are willing to do whatever it takes to make my life just a little bit easier. My loyalty is not free, but comes at a price: namely, that you respect me as a customer. The Apple that I knew AND LOVED is fast losing its shine. Does anyone care?
Richard Graeter

Delegate "New-MoveRequest" permission to users (not administrator)

Similar Messages

Maybe you are looking for