Delegate not seeing newly added calendarse

We are having a problem, where a Delegate can add a change to a calendar, and the calendar owner sees those new changes. However, when the Calendar owner adds a new event, the delegate cannot see those new events. Even after days of syncing changes the other way, no new events show up on the delgate side when the calendar owner adds them.
The delegate is set up with Read/Write access.
Any thoughts on how to resolve such an issue? Or is there a proper procedure to reset the delegates syncing with the main calendar?
Regards,
Greg M

This didn't work unfortunately. Turns out it is one of the 7 calendars that is the problem. Something on that calendar is corrupt or off in such a way, that it won't sync for the delegate.
Strangely enough. We removed the assistants access as a delegate and added her managers account in ical instead. That syncs just fine.
The other thing I found odd, the calendar would partly sync sometimes with the delegate method, but then would halt mid way through. So it seems like it was one or a couple events on the calendar actually causing the problem.
Greg

Similar Messages

Photoshop Elements 10 does not see newly added memory

Hi,
I have been using PSE 10 on my MacBook Pro with 4 GB memory (RAM). Today I upgraded to 16 GB but PSE still displays available memory as 3072 MB.
What can I do to make it use the extra memory? Thanks for reading this.

Yes, I am seeing a problem. When merging multiple frames into a Pano, PSE tries to extrapolate the image vertically to fill the edges. That does not work at all with 4 GB.
Besides, more the merrier. With more memory, I expect the response to be snappier even for normal edits.
I understand that Adobe may want to push me over the edge towards the CS6 if the above really matter to me. It's like driving an economy car versus a luxury car. I only wish the price difference wouldn't have been so huge.

BPM Process does not show newly added task

I added a new task to my current BPM Process which has several tasks already built into it and they work when deployed. When I execute the workflow and get to that step, I get the following message: Details not available for this task. I am using jDeveloper 11.1.1.5. I created my page with ADF. I can see the pages for all the rest of the tasks in my process but not this newly added step. I have checked the source for this task against other tasks in the process and it looks the same. Does anyone have an idea what I might need to change or add in order to make this work?
Edited by: user10279592 on Jan 13, 2012 7:20 AM

If you're getting the Server 500 error and it is not an initiator task, what are you seeing at the bottom of your log file?
If you're getting the Server 500 error and it's an initiator task, then there is a trick to figuring out the real problem (close the dialog -> refresh the worklist -> select the work item at the bottom of the list). The initiator activity makes it necessary to do this additional step to see what the issue is.
Hope this helps,
Dan

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

Itunes not syncing "newly added playlist" on my iphone 5!

I am running IOS 7.0.4 (11B554a) on my iphone5 16Gb, modem firmware 5.02.00. i have latest iTunes (V. 11.2.2.3).
Well, as usual i add new songs to my iTunes library, which also show up in 'newly added' playlist in iTunes. So over syncing, it should also be visible in my iPhone in the 'newly added' playlist on my phone, BUT it does not appear in the playlist, HOWEVER, the song does sync and appears in the normal songs list. It is annoying... it never occurred to my previous iPhone.
> I tried unsyncing my whole music library and synced it again but of no avail.
So any suggestion or solution?? will be highly appreciated! Thanks!

Problems Syncing Playlists & Songs in iTunes with Computer & Apple Devices
I've seen variations of this question on the Apple community boards and I myself have struggled with this for months now and I believe I have a solution, at least for what seems to be one of the problems.
If you have purchased a subscription of iTunes Match, then all of your data is filtered through the glorious cloud. ALL computers and devises involved in syncing data must have iTunes Match enabled for syncing to replicate.
This solved my particular issue within 2.1 seconds.
1) On your computer open iTunes. Go to the menu item 'Store' and click on 'Turn on iTunes Match'.
2) On your iPhone open 'Settings', 'iTunes & App Store', click to turn on 'iTunes Match'.
3) For good measure, restart your computer and iPhone (probably not necessary but I did).
Hopefully that helps if not, I hear Google has some type of phone gadget..

Web Analysis data layout does not reflect newly added attribute dimension

Hi,
We newly added one new attribute dimension. If any new report creation in Web Analysis reflect that dimension. However, the reports which are old(created before the addition of new dimension), does not show the newly added dimension.
Please advice.
Thanks,
Meenakshi

Thanks for this.
I have tried assigning the new DB connection. However, still it did not work. Does the data layout displays dimensions according to reports. I mean, can we restrict the visibility of dimension at report level? Please advice.
Thanks,
Meenakshi

Printservicelookup does not list newly added printer in OAS R2.

Hi,
We are using OAS R2 Server and JDK 1.5. In our application we have a scenario where we will display the list of printers configured to the Server. The below is the code we are using to get the list of printers configured in the server.
Code:
AttributeSet aset = new HashAttributeSet();
PrintService[] services = PrintServiceLookup.lookupPrintServices(null,aset);
The above code works fine to display the existing printers configured in the server. But when ever we add a new printer to the server, it is not listed. We have even restarted the server and the machine after adding the printer,Still it does not display the newly added printer. Any help would be greatly appreciated?
P.S: The same code works fine in OAS R3 server, after restarting the server it displays the newly added printer.
Regards,
Karthik

I have the same problem. Have you found any solution to this issue?

JTabbedPane - not selecting newly added tabs

Is there a way to make it so that newly added tabs in a JTabbedPane are not automatically selected as they are added?
Thanks,
Adam

I don't understand what you mean! It's just the normal behavior addTab and insertTab have! So what do you mean? insertTab remembers the currently selected tab and after adding the new tab tries selecting that one again. Maybe you select the new component after adding it.
--Rasta

Webmail not updating newly added users

Our webmail has been working for several years without much trouble. If I added a user in the Workgroup Manager and the mail for that user worked it was a given that it would work in webmail as well. This was setup by someone who is no longer here. We are using RoundCube and even the address books for the users are available just like they were using Mail.ap. Now the new users are "invalid" in webmail and the address books don't update. Anyone have any ideas how I fix this?

i have imported all the users with pics but the new user added into active directory
How did you do the the above? I've not got any experience with the MySites. But Id try manually syncing the users to see if that fixed the issue.
Okay tested it:
To make the picture sit in AD for the user do this:
$photo = [byte[]](Get-Content C:\pictures\USER.jpg -Encoding byte)
Set-ADUser USER -Replace @{thumbnailPhoto=$photo}
This will add the image to the users Thumbnail attributable in AD. It will then sync to all Microsoft applications that allow the image e.g. SharePoint, Lync, Outlook.
Then you can run the sync PowerShell I linked before.
I must say this is quite neat. Thanks this helped me get some points in the good book here at work! :)
If this is helpful please mark it so. Also if this solved your problem mark as answer.

Windows 8.1 not showing newly added printers

Hey guys,
I just added a new printer to a Windows 8.1 (Surface Pro 3) everything went fine but it never showed up in the printers list, so I tried to add it again and it wants me to give it the name as Copy 1, that to me says it's already there, but it's not showing.
Any ideas?
Thanks.

Hi,
As mentioned by Robert, you could try "Get-Printer" in power shell to check printer list.
Also could you ping your network printer or it was a shared printer?
more information about Get-Printer in power shell
https://technet.microsoft.com/zh-cn/library/hh918358.aspx?f=255&MSPPError=-2147217396
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Refresh of a Report Builder Dataset does NOT show newly added field

I'm working with Report Builder 2.0 (we don't plan on getting SQL 2008 R2 - so NO 3.0 for us!) and have found that if I have an existing report using an existing stored procedure (it has 4 existing parameters) and I add a new field to the stored procedure
it will not refresh the
data set.  I have gone to the DataSet properties and executed the query(SPROC) where it does show the new field (so I know the sproc will
execute), but when I click OK and hit Refresh Fields it stops responding.  I also tried the same steps without the Refresh Fields and still stops responding. I also tried to add the field name and it errored out as invalid.
The only work around I've found is to
create a new dataset referencing the updated SPROC with a different name, deleting the old dataset and then re-naming the newer dataset with the old
one's name so all the field references are the same.  I do know that in the case of renaming
a field in a sproc that this would end BADLY because there is no way any of the old field's references would work.
But it seems odd I have to go through so much to refresh for new fields, so perhaps I'm missing a step in dealing with this situation.  Any recommendations would be appreciated.

Hi CinBH,
I understand that the Report Builder 2.0 hangs while flush the dataset by executing the query. In that case, I think it is necessary to capture a user dump when the problem occurred. And then, you can send the dump to Microsoft CSS support. Support Professionals
from Microsoft will assist you to solve the problem.
I am providing the steps below for you to gather the hang dump or crash dump to further work on this issue,
Hang dump,
a. Open Report Builder as usual, and wait for a while.
b. When you found that the Report Builder application hang, and was not responding, please open TaskManager by one of follws,
- Pressing “Ctrl + Alt + Del” button and then click “Start Task Manager” item.
- Or right-clicking your task bar, click “Start Task Manager”menu.
c. Once the Task Manager opened, switch to Process tab, find the “Report Builder” process MSReportBuilder.exe.
d. Right-click the item, click Create dump file.
e. After that, it will prompt a window and let you know the location of the dump file.
You can copy the hang dump or crash dump file to your development machine configured with symbols files, and open it in Visual Studio 2008. Next, you can analyze the error / exception, and call stacks to see why the error happens.
Thanks,
Eileen

Not Show Newly Added Row

i want to when after execute emptyrowset() in view object.
and add new row to view object adding values to new row object.
I checked all the values already added to new row object.
but in out put adf table didn't show add new row.
below the my code
BindingContext bc = BindingContext.getCurrent();
JUApplication japp =
(JUApplication)bc.getCurrentBindingsEntry().get("AMDataControl");
AMImpl Am =
(AMImpl)japp.getApplicationModule();
CCBSViewObjectImpl voDetailsVO =
Am.getDetailsVO();
voDetailsVO .executeEmptyRowSet();
Row newRow = voDetailsVO.createRow();
newRow.setNewRowState(Row.STATUS_INITIALIZED);
newRow.setAttribute("Id", next_seq);
newRow.setAttribute("No", "3569");
newRow.setAttribute("Time", "15");
newRow.setAttribute("AgentId", "Sameera");
newRow.setAttribute("Type", "SA");
newRow.setAttribute("Status", "VF");
newRow.setAttribute("BackType", "N");
newRow.setAttribute("Remarks", "NOT CLEAR");
newRow.setAttribute("UpTime", new Date());
newRow.setAttribute("ResolvedTime", new Date());
voLastCallDetailsVO.setCurrentRow(newRow);

This is my mistake original can use correct VO i have below mentioned.
voDetailsVO .executeEmptyRowSet();
Row newRow = voDetailsVO.createRow();
newRow.setNewRowState(Row.STATUS_INITIALIZED);
newRow.setAttribute("Id", next_seq);
newRow.setAttribute("No", "3569");
newRow.setAttribute("Time", "15");
newRow.setAttribute("AgentId", "Sameera");
newRow.setAttribute("Type", "SA");
newRow.setAttribute("Status", "VF");
newRow.setAttribute("BackType", "N");
newRow.setAttribute("Remarks", "NOT CLEAR");
newRow.setAttribute("UpTime", new Date());
newRow.setAttribute("ResolvedTime", new Date());
voDetailsVO .setCurrentRow(newRow);

Why is FireFox 11 not seeing newly installed Java 1.6.0_31 on Mac?

I used Software Update on my OSX Lion Mac to upgrade to Java 1.6.0_31-b04-413. The update showed as successful and that is the version shown in the Java Preferences utility. I rebooted afterwards and have restarted Firefox many times, but Firefox 'about:plugins' still shows an outdated version (14.2.0) and and applet versions of 1.1.3, 1.2.2, 1.5, 1.3.1, 1.3, 1.1.2, 1.1, 1.2.1, 1.6, 1.4.2, 1.4, 1.1.1, 1.2, and an applet jpi version of 1.6.0_29. The check for updated plugins also shows that I am not using the current version and tells me to update to 1.6.0_31, which I have already done. I have tried rebuilding the Firefox plugins database and that didn't solve it. Any thoughts on how to get Firefox to see and use the upgraded Java on my Mac?

see Cww reply :
https://support.mozilla.org/en-US/forums/contributors/708284?last=46038#post-46038
thank you

Standalone Logviewer does not display newly added subdirectories.

We are running the logviewer daemon on our UNIX servers so the developers can monitor the logs. We noticed that whenever a new subdirectory in our case a log4j log file subdirectory; the file does no show up in the logviewer until after you restart the log viewer daemon.
Has anyone else noticed this? Since developers can add new log4j log file directories at any point, restarting does not seem practical. Refreshing the node of the tree did not appear to work either.

Hi
please have a lok at this guide which tell how you can integrate third party logging api 's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36085e78-0801-0010-678d-8b4e89ddff3c
Also a sample example on integration with log 4j is given which can be downloaded
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/webas_migration_isv_certification/logging.zip
hope this helps, please mark points for helpful answers
regards
rajeshkr

IPod touch 4th gen will not sync newly added music, why?

I uploaded all my CDs to iTunes and it will not sync to my iPod. What am I doing wrong or how can I fix this?

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? (iTunes purchases only)

Delegate not seeing newly added calendarse

Similar Messages

Maybe you are looking for