Delelet about 2000 contact groups with same starting sequence for name

Hi,
I have about 2000 contact GROUPS, which I need to delete. All groups start with _ModGrp and were created by a Deutsche Telekom app (according to the groups names) on my iphone and syncronized to all my devices. I´ve reported this app to apple a while back and the bug got fixed, however I still have all those groups.
Any and all help would be greatly appreciated.

All recently created Group Chats will be Cloud based group chats. It doesn't matter whether a group is created using Skype 6.21 or 7.0 version. Obviously, all groups created using 7.0 are cloud based, because the 7.0 version was not yet available when P2P groups could still be created.
Groups created in the past using 6.21 version might still be P2P type but they can be accessed by the 7.0 version too.
However, groups created on one Skype device are not automatically added to Contact List on Skype clients installed on other devices.
As pointed out by Capreolus, the group created using 6.21 should appear in the Recent tab whenever some one sends a new message to this group, and from there it can be added to the Contact List. At least in theory, this should work. The "real life" might be unpredictable.

Similar Messages

AP groups with same vlans , same ssid but different subnet.

Hi Members,
I have a Cisco Flex 7500 in my datacenter and I need to connect 100 sites , each site with 2-3 APs , each side has its own network and is independent of other sites , the site only need to comunity locally and do not need to access any centralized applications.
I am trying to achieve this by Creating 100 different AP groups and assiging 2-3 AP in each groups for each branch, I will achieve WAN failover resiliency by creating flexconnect groug , the issue I am facing are as below .
1.Since all the sites has same setup , the AP and clients on all sites are in vlan 2 , so when I try to create 2 or more AP group with same vlan, it restricts me of doing so , I cannot create diffrent AP groups mapped to same Vlan .
2.If I keep the APs and Clients in the same subnet , I dont think it should be a problem , but I need your second opinion.
to give you an even better picture , look at the topology enclosed , and my question is if both STAFF and STUDENT APs are in same vlan but in 2 different broadcast domain , how would I create the AP groups.
Thank you

Thanks for the reply Jenn , here is my situation.
I have 2 sites lets day , site A in virginia , site B in Maryland.
SiteA - 10.1.1.0/24 - vlan 2
           10.1.2.0/24 - vlan 3
           10.1.3.0/30 - WAN to central site where controller sits.
SiteB - 10.2.1.0/24 - vlan 2
           10.2.2.0/24 - vlan 3
           10.2.3.0/30 - WAN to central site where controller sits.
both the sites will have a single ssid "XYZ" and will switch locally only.
howin my understanding the way I will deploy this is as below
1.I will create WLAN with ssid "XYZ".
2.I will create 2 AP groups lets say "Site-A" and "Site-B"
3.I will map the APs in site A to AP group "Site-A" and APs in Site B to "Site-B"
4.I will create 2 dynamic interfaces one for each AP group , now this is where I am facing problem , when I am creating dynamin interfaces , I need to specify the subnet and vlans when creating dynamic interfaces , since the vlans used is same on both sites , its not letting me create 2 interfaces with same vlan id.
in my understanding HREAP is only majorly used for WAN failover and local authentication so I am not concerned about that right not , my prime work is to udnerstand the AP group and working.
if you still need print shot let me know I will have to go at site.
also validate if my thinking is right on the 4 steps I have mentioned above , I am new to wireless and whatever I have learned I have learned in last 10 days .
Appreciate your help.
Thank you

Again : nokia 6131, syncing contacts/groups with P...

Could anyone ( nokia are you there ??) please tell me if PC Suite could retrieve groups info defined on my phone ? and regarding contacts is there any way to export them ( csv file or somthing like that )
Regards
Silvio
nokia 6131, syncing contacts/groups with PC Suite
sm707
Visitor
Posts: 1
Nokia 6131, Windows XP SP2 all updates, PC Suite 6.82.22.0, Bluetooth
I need help on syncing groups with PC Suite. When browsing contacts with Phone Browser, I can edit/view contacts, but no info about the groups I've defined on my phone.
I've also tried syncing contacts with Lotus Notes but no groups were exported.
This is a very important feature for my job.
Thanks ,
Silvio

if you are using the ovi.com, i would suggest you get your contacts squared away and sync them elsewhere, that is going to be deleted soon, if not already.
i had issues syncing my data with nokia services for the longest time. it was good, then they "fixed" the nokia suite and it wasnt....then there was ovi suite and that botched them all too.
i used to sync directly to my outlook with the 9500, and then through my other devices until ovi suite when i grew tired of the challenges with the contacts.
eventually, i ended up signing up with office365 to get an exchange account for $5/mo.
i think that the devs for the software products only use thier nokia exchange accounts when testing, which goes around the issues that we have had.
i would create either a google account and sync there, or if you want to also sync directly to an outlook, create a live/hotmail/outlook.com email address and then download the hotmail connector application for your pc, and then it will sync your wireless devices and outlook like a free exchange server and sync contacts/calendar/email.
if you go that route, you can get the hotmail connector here: http://office.microsoft.com/en-us/outlook/microsoft-office-outlook-hotmail-connector-overview-HA0102...

Sending to a shared contact group with subgroups fail

Hello all,
I am hoping someone can help me with this one, as I have researched non stop and cannot find an answer.
SCENARIO:
Outlook 2010 (with all the latest updates)
Exchange 2010
Windows 7 x64
We are a group of 15 users. All 15 of us add a shared mailbox used for communications into our Outlook client so we can access and monitor the entire mailbox, including contacts.
When trying to send a communication to a Contact group that is in the shared mailbox contacts, it will work fine unless there is another contact group within that group (subgroup). The email will bounce back with the following error:
[email protected] #550 5.4.4 ROUTING.NoConnectorForAddressType; unable to route for address type ##
If you send to a contact group with a subgroup from your own local contacts, it works fine.
If you send to a contact group without a subgroup, it works fine.
If you log directly into the shared mailbox and send from there, it works fine.
This issue appears ONLY to occur when sending to a contact group that has a subgroup within it from a shared contact list.
Based on my investigation, it appears that Outlook is trying to look for the subgroups within the local contact list, not the location of the actual contact group itself. Perform the following steps:
Add an additional (or shared) mailbox to your Outlook profile.
In the shared mailbox contact list, create 2 contact groups. (Test 1 and Test 2).
Add Test 2 into the Test 1 group. In Test 2 group, create/add a contact. (This may easiest be done by the shared mailbox itself)
Ensure you are logged into your original profile, and Right click the Test 1 group and Create->Email.
You will notice right away if you expand the Test 1 group, it will show up Test 2 (Unknown) and if you try and double click Test 2 to see it's properties, it says it cannot find it. If you perform this same step while logged into the shared mailbox directly,
it is able to locate the contact.
Any information I have found on this bounceback references a bug where a link in an email who try to send to a contact using MAILTO instead of SMTP. However, this is not the scenario I am in.
It is currently not feasible to have everyone add all these contact groups into their own contact list, as these groups change all the time.
If anyone has any ideas how this could be fixed, or have maybe other suggestions of how to use and access groups with subgroups for communications without logging into the shared mailbox, that would be great. We are unable to login to the shared mailbox
directly anymore as we are doing away with shared passwords.
Thanks all

Hello,
How did you select the recipients when composing email? Did you click the To button and select it from the Address Book or use the auto-complete list? If you select from the auto-complete list, please try deleting the contact group from the auto-complete
list and then test again.
In addition, since the bounceback error is similar to the MAILTo bug, we may try to install the hotfix to take a chance.
http://support.microsoft.com/kb/2597052
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to sync contacts group with Ovi PC suite or Ov...

Hi
I have a N97 with latest firmware.
Does anybody know how to sync contacts group with Ovi PC suite or Ovi.com?
I go to the option in (Menu/Settings/Connectivity/Data transfer/Sync/), then edit profile.
But don't know how to define the database of contacts group.
Anybody knows? Thanks

Hi you can sync groups with Ovi suite on your computer, you can also edit them by right clicking a contact and adding to group !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How can I specify which contacts group is my preferred/default for my iPhone?

Similar situation as others I've seen...
My wife and I share an iTunes account. We also use that account for our iCloud account. We want to share our calendar(s) with each other. We enjoy having access to the number of contact groups we've put together over the years.
I want to be able to designate one of the contact groups as my default reference for my iPhone so that when I recieve messages and calls they are recognized by the identifiers in my phone's contacts list (not as if they are my wife's contacts). Sure, we could set up multiple iCloud accounts... We feel we shouldn't have to, besides, that wouldn't allow us to share our calenders and contacts anymore. It seems to my that the most "Apple" way of fixing this would be to have a "Settings" option in the "Mail, Contacts, Calendars" - particularly in the "Contacts" grouping to have a "Primary Contacts Group" (if more than one is detected) option to choose from.
Is this something that can be done or do I need to submit this as a requested future feature to something like the Apple Bug Reporter?
Thanks all!
ツ

Is there a way to specify which network card (IP
address) that the jvm will use as default? (Whenever
opening a connection such as URL.openConnection,
sockets without specifying the local address etc.)No there isn't, but if you are only talking about outbound connections and the network cards are on distinct subnets, unicast routing will ensure that the most appropriate outbound NIC is used for the target IP address, so configure your firewall accordingly.

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

Synching gmail contact groups with the iPhone

Can I import my gmail contact groups into an iPhone/Macbook? Do I need to put them in the iContacts or some other way. Thank you..

Found out I was using Outlook 2000. Syncing won't work unless you use Outlook 2003 or higher. I got around this by going into Outlook contacts and did the following steps under the file tab I:
1-Export to file
2-Comma Separated Values (Windows)
3-Named file
4-Saved file to desktop
Then I copied the contacts file to mobile thumb and imported them to Windows Address on another computer. From there I synced with my IPhone.
I found out Windows Address mirrors anything under Outlook. Because my Outlook is old and in the wrong format using my Windows Address will do the same thing thus I needed to copy info to another computer in order to use Windows Address. I will upgrade Outlook and see how that works but for now I have a temporary fix to problem.
Hope this helps.

Syncing gmail contact groups with ipad2

I wish to sync my gmail contacts groups using microsoft exchange on the iPad2. Everything syncs correctly except the gmail groups I have created for my contacts. Anyone have a solution ?

I just set up syncing with Gmail Contacts for my wife's iPad this morning. IOS doesn't handle Groups. I've seen lots of gripes about this in many places online. I've also seen it suggested that we should suggest this as a "feature" to Apple. I'm going to look all day today for a place to do this. I hope you will, too. Good luck!

Family account for contacts but with same apple ID - iCloud use

Hi, I am writing to ask what the best way to setup a multiple contacts account using the same apple ID for iCloud. My wife and I both use the same apple ID for our iPhones as well as our iMac and iPad. I would like to be able to have my contacts on my iPhone and iPad and have my wife's contacts on her iPhone (and obviously having both our contacts on our iMac for backup and reference). I have read some forums suggesting creating a "family" apple ID accout for some iCloud stuff where I could have my contacts linked to and then having our existing apple ID for her to use. We share calenders, downloaded apps/purchases and some Documents and Data (Money app) - all of which I would like to keep the way I have described. I would just like to be able to have my contacts and her contacts separate for iCloud purposes. I read something about the primary and second account settings in the Mail/Contacts/Calenders but it isn't very clear. I seem to
I have yet to venture creating such another apple ID account as I don't really know how to go about doing it.
Thanking you in advance,
Bill Cooley

bill.nymus wrote:
Hi, I am writing to ask what the best way to setup a multiple contacts account using the same apple ID for iCloud. My wife and I both use the same apple ID for our iPhones as well as our iMac and iPad.
Much easier to manage if you each have your own AppleIDs and computer logins.
You can easily share contacts and calendars through iCloud while still keeping them separate.
You keep this AppleID.
She creates a new one and adds it on her iPhone in Setttings > Mail, Contacts & Calendars
These are your primary iCloud accounts
Now each of you go to Setttings > Mail, Contacts & Calendars and add an iCloud account.
Add the other's account (as a secondary iCloud account). You can select to use Mail, Contacts, Calendars, Reminders, Bookmarks, Notes, Find My iPhone.
I have my daughter's iCloud account this way and I use Contacts, Calendars, Reminders. This way I can view or update her info from my iPhone/computer.

Sending mail to a contact group with a numeric name

Hello!
I have a problem when sending mail to a contact group. The contact group is named "1234", and in Mail the autocompletion of the address is not performed successfully.
However, if I rename the group to "A1234" then it all works. Sounds like a bug to me.
Also, I have 31 people in my contact group. And, when adding the "A1234" group in the To: field - not all in the contact group are added. (And yes, they all have valid email addresses)
This also sounds like a bug to me. Or, am I missing something?
I should also add that when - in the address book - I select the group and "Send email to group", not all people in the group are added either...
Cheers,
/ Peter

Your email provider limits the number of email addresses you can send to at once, so it's likely you exceeded that limit, thus causing their server to hang. Check with them to find out that limit, then try reducing the number of recipients your sending to in that group to that number or less.

Same Valuation class with diff valuation group with same valauation area

Dear Expert,
We r having two material XYZ and ABC with same valuation class and in the same plant(valuation Area)
For consumption VBR general modifier we want to assign two different gl codes to different material XYZ & ABC.
Is it possible in OMWD can we able to assign two vaulation group to same valuation area(plant) of same company code.
Regards,
Alok

Dear Umakant,
Both materials has one valuation class. How can it hits two different gl codes while consumption.
Any solution other than creating separate valuation class.
Regards,
Alok

N95 Contact Groups with iSync

Hi there,
I have done some searching around and can only find old posts on this and was wondering if this had been sorted since.
I have a Macbook and I use contact groups in my Address Book. I would like those contact groups to be created on my n95 address book when I use iSync.
Can this be done? Also, if it can be done with a special program please tell me as I will happily install something to get this to work.
Thanks,
Mike

Hi Stephan.
I found that iSync had errors when syncing that was stopping it refreshing the groups successfully.
1. Open Applications > Utilities > Console.
2. Open iSync and try and sync
Look in the console log and see if it comes up with any entries with error or failure in them. In my case I had an error that a directory did not exist and this was causing iSync to lock up when it came to refreshing groups from Addressbook. My error is reproduced below.
2006-05-30 12:19:26.124 AddressBookSync[324] SyncServices assertion failure ([[NSFileManager defaultManager] fileExistsAtPath:directory]) in [ISDRecordStore initWithDatabaseInDirectory:], /SourceCache/SyncServices2/SyncServices2-188/SyncServices/ISDRecordStore.m:32 directory does not exist: /Users/xxx/Library/Application Support/SyncServices/Local/clientdata/0063006f006d002e006100700070006c0065002e0 0410064006400720065007300730042006f006f006b
In my case, I created the directory mentioned which stopped the error occurring. For some other reason when I sync'd next I had duplicate contact groups - but one of the duplicates was empty. I was then able to delete the duplicates in AddressBook and sync my desired group to my phone.
If iSync works correctly, you should only receive one line in the log after syncing if there are no changes e.g.
2006-05-30 12:38:37.709 iSync[339] we receive the end of our sync plan
This may or may not help in your situation.
Cheers Gav

Ability to set same Start date for two different discrete Job in ASCP

We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks
Edited by: user604737 on Nov 10, 2010 9:55 AM

Hi,
964188 wrote:
It is a date
Such as
10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
WHERE   TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
WHERE   start_datetime >= TRUNC (SYSDATE - 7)
AND     start_datetime < TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
See the forum FAQ {message:id=9360002}

How to achieve same start date for two ATO Items- req to built together

We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks

Hi,
Please check Vendor Master data: FK02 ->company code data -> Payment transaction accounting: unflag 'individual payment'.
Make a test and let me know if it's okay.
regards

Delelet about 2000 contact groups with same starting sequence for name

Similar Messages

Maybe you are looking for