Delet Material Master Record but not the range

HI experts,
I have more material master records in production data base; now i need to delete them but at the same time don't remove the range numbering.
I.E.
there are 10 master record with range number from 1 to 10.
now, deleting these 10 master records, i would like to avoid that the numbering starts from 11.
thanks in advance
C.

Hi Jurgen,
I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
Thanks for the time in explaining.
Steven

Similar Messages

  • How can i delete my icloud account but not the password to turn off the find my phone

    how can i delete my icloud account but not the password to turn off the find my phone setting

    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iPad and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How did the photos get onto the phone ? Only photos taken with the phone or saved from emails/websites etc can be deleted directly on the device. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

  • Master IDOC but not the communication IDOC

    Hi
    what is master IDOC and the communication IDOC
    what is the diff?
    i have installed sap gui in my system and how to connect the sapserver through internet?

    HI SAPABAP,
    1>Master idoc is only created but it won't be stored in database,where as communication idoc is stored in database.
    2>Data is transferred via communication idoc not by master idoc.
    Regards,
    Nagaraj

  • Can delete music...but not the file

    Alright, I've tried searching the glorious internet for help, but it don't work. I'm having a problem with iTunes 11.1.3.8 where I can delete music from iTunes perfectly fine, but it won't delete the file from my PC like it used to. And yes, I've tried every possible delete button. All of them. So don't suggest that. Please. Anyways, I have a bunch of duplicates and bad quality songs in my library that I'm trying to clean out. I'd just delete the file myself but since it's a dupe I don't know which one it is and I'm not up to guessing. It's really getting on my nerves and I just want some help before I have an aneurysm. I'll keep you guys updated if I find a solution.

    Jib,
    When you delete a track from your iTunes library, iTunes will offer to delete the file too, but only if the file is in your iTunes Media folder.  If the file is located elsewhere, iTunes will just leave it alone.
    If you have files outside the iTunes Media folder, deletion requires a slightly more complicated procedure:  right-click the track, Show in Explorer, delete the file, then back to your library and delete the library entry.

  • IN MATERIAL MASTER RECORD WHAT IS THE USE OF CLASS TYPE(CLASSIFICATION VIEW

    Hi Guys,
    Can you please explain what are the different critiria to use different class type and what exactly meaning of the each class type with respect to Material classification.
    Any material available on this to study. Please give link.
    Thanks,
    Dhanu

    Hi,
    Purpose
    The classification system allows you to use characteristics to describe all types of objects, and to group similar objects in classes u2013 to classify objects, in other words, so that you can find them more easily later.
    You then use the classes to help you to find objects more easily, using the characteristics defined in them as search criteria. This ensures that you can find objects with similar or identical characteristics as quickly as possible.
    Integration
    The classification system allows you to classify all types of object. First, you must define certain settings in Customizing for the classification system. For more information, see Customizing for the Classification System.
    SAP has predefined a number of object types (for example, materials, and equipment). The settings for these object types have already been defined in Customizing, so you can start to set up your classification system for these object types without defining further settings.
    Features
    Before you can use classification functions, you need to set up your classification system.
    The there are three steps to setting up a classification system:
    Defining the Properties of Objects
    You use characteristics to describe the properties of objects. You create characteristics centrally in the SAP R/3 System.
    See the SAP Library, Characteristics (CA-CL-CHR).
    Creating Classes
    You need classes to classify objects. These classes must be set up. During set up you must assign characteristics to the classes.
    Assigning Objects
    Once you have created the classes you require for classification, you can assign objects to these classes. You use the characteristics of the class to describe the objects you classify.
    This completes the data you require to use your classification system. You can then use your classification system to find objects that match the criteria you require.
    Once you have set up the classification system you can use it to find certain objects. To do this:
    Find a class in which objects are classified
    Find the object(s) you require in the class
    When you use classification to find objects, you use the characteristics as search criteria, and the system compares the values you enter with the values of the classified objects.
    Uts
    Award if helpfull

  • How to load AFS Material Master records.

    Hello everyone,
    I am new to loading AFS Material Master records.  In the past I have simply used the Material Master direct input programs, or batch input, to load the data.  Because of the extra AFS fields, I was guessing there must be a new direct input program, or batch input, for it.  Maybe there is a IDOC that must be used?
    Any help will be appreciated.  Thank you all.

    Hey there again, I just wanted to bring this subject back up again. 
    I always took it for granted the we loaded materials in batches.  We would load basic data for some materials and then extend the plant data, then sales, storloc data, warehouse data.  That is a total of 5 files one after the other.  I never really thought of why we did this, but now that I think about it maybe we did because it only took a little bit of data to create the basic data.  When you extend the plant data, you do not need to enter in the data already created from the initial basic data load.  Sales data only required so much so you could skip all the unnecessary basic and plant data. 
    Is that why  you loaded in batches, because it is easier to extend? 
    If you wanted to you could have all the basic, plant, sales, purchasing data on one record if you really wanted to.  Why didnu2019t you do it that way?
    Thanks for the input.

  • Material Master Record - How to remove or delete storage location

    Dear all,
    Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
    I've tried the following:
    1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
    2. I tried MMSC attempt to delete and I get either messages with different material master record:
    a) "Material not fully maintained for this transaction/event"
    OR
    b) "Storage location 60BF already exists and cannot be deleted"
    P/S: If this question has been asked before by others, please point me to that thread.
    I'm grateful for any suggestion. Thanks.
    Steven

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Product hierarchy in the material master record

    Hi,
    I am handig Data migration project.
    This is related to Product Hirerarchy.
    I one business Product Hirerarchy have been configured. But in another buisiness, Product Hirerarchy has not been configured.
    There are some common materials using by both business processes.
    For coomon mateials  if I am maintaining Product Hirerarchy value in the material master record, is there any impact on business which is not being used Product Hirerarchy. Whether it will stop / impact on business processes.
    Can you explain plz
    Thanks in advance
    Regards

    Hi karthink,
    Thanks for your inputs.
    we are meging two servers. In that in one server, product highrechy have been configuredand in another server not configured.
    There are some materials with the numbers calling as a common parts exists in both servers.
    ex: plat 0001 in one server 1         &          plant 0002 in server2
    Common part is : m1
    plant 0001  not using product hierarchy and plant 0002 not using product hierarchy,.
    After golive, all the common parts are being used by both plants and same basic data 1 view.
    If we are maintaing product hierarchy in the basic data 1 view, it will flow into sales view as well.
    Then what about impact on the plant 0001 business since it is not using product hierarchy.
    In the configuration, is there any settings to activate / deactive product hierarchy at sales area level.
    Is there any impact on MM / FICO side.
    Please explain.
    THANKS IN ADVANCE.
    Regards
    KRK

  • Delete a Material Master Record Permanently from R/3 4.7

    We have a requirement to delete certain material master records permanently from our R/3 4.7 system. We have already archived all the relevant material master documents using SARA and are now trying to delete the material permanently using SARA but are unable to do so as the program is finding archive entries in MARI and prevents the material from being permanently deleted.
    Is there a way to remove records from MARI so that we can delete the material master record permanently.
    Thanks in advance.
    Samir

    It looks like transaction MMDE cannot be used for deleting only a certain set of materials. It is setup to delete all the materials.
    Is there a way to delete only a certain set of materials permanently from the client?
    Thanks
    Samir

  • "SOME" devices can resolve the ALIAS (CNAME record) for a device, but not the REAL name (A record) - Why? How do I fix this?

    I'm running the DNS server role on Windows Server 2012 R2 on a physical machine on my home network.
    My AD is configured with a non-registered name - let's say it's "home.acme.ca" and the DNS server is configured to host that zone.  I also configured a 2nd zone in the DNS server called "myinf.acme.ca".  They both run on a physical
    server with an IP of 192.168.1.10
    The DHCP server on my Cable Modem is configured to hand out 192.168.1.10 as the only DNS server to every device on my network.  On my servers (with static IP addresses), 192.168.1.10 is configured as the only DNS server available for them. 
    I took the DNS servers from my Cable Provider and configured a Forwarder on my server to send name resolution requests to them only if my DNS server can not answer the request - basically for any name resolution request that does not end with ".home.acme.ca"
    or ".myinf.acme.ca"
    The "home.acme.ca" zone is populated with 'A' records for all of the physical and virtual servers and PC's on my network.
    The "myfin.acme.ca" zone is populated with 'CNAME' records that point directly to the 'A' record in "home.acme.ca" - for example, I have a serve named s000abc123ww.home.acme.ca with an 'A' record providing an IP address of 192.168.1.20 and
    I created a 'CNAME' (alias) record named 'webserver.myinf.acme.ca' which points to the 'A' record 's000abc123ww.home.acme.ca'
    2 of my 6 machines can resolve the alias but not the real name of the server!
    .10 is the Domain Controller.  All of the other machines (except .98) are members of the home.acme.ca domain.
    I attempted to ping 's000abc123ww.home.acme.ca' AND 'webserver.myinf.acme.ca' on the following 6 computers.  I used the fully qualified name in all cases.
    4 of the below machines are able to resolve BOTH names.  The other 2 can resolve the Alias but not the real name!
    I don't understand how this is possible, but I would like to fix it...!!!  Please help?
    .10 - Server 2012 R2 (Physical) -  Hosts Active Directory and DNS.
    .20 - Server 2012 R2 (Virtual)   -  Runs SQL Server
    .21 - Server 2012 R2 (Virtual)   -  Runs Apache
    .22 - Server 2012 R2 (Virtual)  -   Runs Apache.  This is the device I am trying to ping (s000abc123ww)
    .98 - Windows 7 (Physical)
    .99 - Windows 7  (Virtual)
    .21 (which is configured nearly identically to .20 and .22) can resolve and ping the Alias, but not the real name.
    .98 can also resolve and ping the Alias, but not the real name.
    The rest of the machines can resolve and ping both the alias and the real name.
    All of the Virtual Machines are running under Hyper-V on the .10 physical server.
    All the devices are on the same subnet.
    Thank in advance to anyone who can help me understand and correct this problem!
    Jim

    Hi,
    CNAME resource records are recommended for use in the following scenarios:
    • When a host that is specified in an A resource record in the
    same zone needs to be renamed
    • When a generic name for a well-known server, such as www, must resolve to a group of individual computers (each with individual A resource records) that provide the same
    service, for example, a group of redundant Web servers
    Therefore please try to create your CNNAM record in the same zone and try again.
    The related KB:
    Adding, Changing, and Deleting Resource Records
    http://technet.microsoft.com/en-us/library/cc779020(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have  a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

    QUESTION.
    Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
    I am using  a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading  Iphoto ?
    I hope that someone is able to help in this matter , as i have to restore 12000 photos !
    Thanking you in anticipation.
    Alan from Wigton

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • HT1386 i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

    i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

    Hey renie1515,
    Thanks for using Apple Support Communities.
    When you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
    Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
    Have a nice day,
    Mario

  • How do i delete files in pages, i have some old invoices in pages that i want to delete, i can delete the text but not the whole file, please help. Dennis

    As it say's above i need to delete some of my oldinvoices/estimates from my files in pages, i can get rid of the text but not the whole file, thanks Dennis

    You locate the file in the Finder(it's in the Documents item of the sidebar by default), drag it to the Trash, and empty the Trash.
    (59926)

  • I want to download a record that is available in the UK store but not the US store.  Is that possible?

    I want to download a record that is available in the UK store but not the US store.  Is that possible?

    Not without going to the UK and supplying a payment method valid there.
    (81926)

Maybe you are looking for