Delet plan order through mass processing (cohv)

hello,
PP experts i want the solution for deletion of plan orders in the transition cohv
in the COHV transition the mass processing selection do not have the function
technically complete for plan orders.
plase tell me how the function tech. complete can be created for the plan orders in the COHV.
regards,
mangesh

Mangesh,
As suggested by fellow forum members "MD16" is the only possible option in Standard SAP to delete planned orders in mass.
If you need anything other than that you need to go for your own custom program to do the way you want.
Please close the thread after rewarding points for answers which helped you.
Regards,
Prasobh

Similar Messages

How to view the planned orders in mass and how to delete in mass

Hi gurus,
How to view the planned orders in mass and how to delete in mass.
Regards
R.Rajakarthik

Hi,
Use the collective display of planned orders, transaction code MD16.
You can select the data by different options and choose which ones or all that you need to delete.
Click the Delete button to trash them.
This will delete planned orders without deleting the planned independent requirements and sales orders.
Hope it helps

Deleted planned order in any table??

Hi,
Is it possible to see the deleted planned order in any table??
Ramagiri

Hi,
It is right that you will not get the planned order data which has been deleted.
But after conversion of planned orders to process/production order the planned orders will get deleted.The planned orders data can be found fromAFPO table.But manually deleted planned order data can't be found out.
Hope this can help.
regards,
kaushik

Delete Planned Orders

Experts,
is there a way to delete (Mass Delete) planned orders in SAP. Beside using MRP-Run ?
Thanks in advance
Jörg

HI
Check this program RMPLAF00
also check this thread
How to mass delete unfirmed planned orders?
Regards
Anupam Sharma

Planned order scheduling mass update

Hello all,
Is there a way I can change the scheduling dates for the planned orders collectively. (not MD16) ?
Thankyou

Hi,
check the following
Mass Changes of Planned Orders (Action Control)
Use
You can use this function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
Features
SAP supplies the function module MD_SET_ACTION_PLAF for action control.
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Confirm planned order (in repetitive manufacturing)
Firm planned order data
Firm planned order components
Print component overview
In connection with an action, you can always change planned order data, for example; order quantity, dates or production version.
The function module also enables you to program further customer-specific actions.
You can execute the actions for several planned orders simultaneously.
You can create action chains, that means, have the system execute several actions in a single operation.
Activities
Define your own actions and program a report that includes these actions. As an example of this, the transaction MDAC Execute action for planned order (MRP ® Planned order ® Execute action) is available.
In this example action, you can use actions only for individual planned orders. Nor can you form action chains, only simple action transitions are possible.
Determine an action key and action controls in Customizing for MRP in the IMG activities Define action key and Define action control. An action key describes the actions that can be executed for a planned order. Action controls determine which actions are allowed and in which sequence they are to be executed.
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Regards,
nandha

Report to delete planned orders

Dear Friends,
Can anyone tell me which is the transaction to run the delete from live cache to delete planned orders.
Thanks
Vinay

HI Vinay,
Yes, you can delete the planned orders from either product view (rrp3) or receipts view (rrp4). I guess, the planned orders now are coming with the 'firm' indicator and using product view you cannot delete fixed orders.
Which version you are working?
Thanks & Regards,
Jagadeesh

Query on open planned orders details with process order GR details

Dear Experts,
I need to create a query in SQ01 where the requirement is as given below,
Query output should display the open planned orders (Planned orders which is not converted to process order details) details for a material like Planned order number, Planned order quantity, Start date, Finish date and also the details of the list of process orders created for the same material with its details like PO qty, GR qty, Basic start date, Finish date, Actual finish date, BOM Component material codes, component quantity.
But i tried creating this query by joing the tables PLAF+ AFPO+AUFK+ AFKO+RESB . My input parameter will be the Material Number for which Planned order and Process orders are being created.
But i am unable to generate the output when i create a query by joining these tables
Is it possible to obtain the output for open planned order details and process order details in a single query ?
I am failing in my repeated attempts
Please provide your suggestions for developing this query
Regards,
J.Balakrishnan

Dear Bala,
as alternative , for use a query report and not a custom abap report, you can try to read data from MRP tables MDKP and MDTB . In these one tables you can find both elements (planned order and production orders) for to start to research all details that you need.
You can also use MDTB-DELKZ to filter only planned order (PA) and Production order (FE).
With the number order you can read the RESB table in order to define components details.
With this table would you the advantage to have always the opened orders.
If the following table are empty you should make a little customizing modification so that once MRP run will write them.
Give me feedback if i have been useful for you.
Daniele

Planned order conversion to Process Order and Stock Transport Order

Hello Friends,
Help me to setup the below scenario
We have an requirement wherein MAT1 can be inhouse produced or can also get stock from other plant via stock transport order.
For which in Material master I have configured
MRP 2 view
Procuremrent Type - X
Special Procurement - 40 (wherin the splly plant is maintained)
MRP 3 view
Strategy group - 40 (as it is planning with final assembly)
But when i run MRP system created Planed orders for PIRs. Selecting Planned Order conversion only Purchase req tab is available we do not have an option to convert to production order.
Kindly help me correcting the settings, so that i should be in a position to convert planned order either to process order or Stock transport Purchase requisition.
Thanks and Regards,
Chandra

Hi Chandra,
Stock transfer is only possible with procurement type 'F'. when you take spl.procurement type 40, its a combination of F(procurement type) and U (Spl.procurement). it will over write the procurement type ('X' in your case) in material master. that is the reason u r getting only pur req.
if you know the proportion quantity i.e how much inhouse and how much stock transport, then use quota arrangement.
or
don't use any spl procurement key. define the materials in both the plants. when converting planned order to pur req. manually assign supplying plant and item category 'U'. try this.
Thanks & regards
Dilip

How to create the planning function through the process chain

Hi guys,
currently i am running some planning function in fortend so it is time consuming now customer want the run the planning function through the process chain any body having the idea please give me.

Hi,
this is standard functionality, cf.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/946677f8fb0cf2e10000000a114a6b/frameset.htm
Regards,
Gregor

Indicator "delete planned order" is set during conversion

Hello Guys,
While during Partial conversion of production error thru MD04, system shows the error message as indicator "delete planned order" is set. Whats the cause for this error How come we solve this issue . It's very most urgent Please PP gurus let me know the solution. Thanks in advance.
Thanks...

Dear Raja,
If I have understood your problem correctly,then i Guess in the partial conversion screen,directly you are able to set the delete
indicator and save the data.But remember that for the same planned order quantity the system generates a production
order ,along with the planned order number linked to it ,when you do this deletion activity and save.
You can check in MD04 with the available production orders and in the assignment tab page you can check the planned order
number also.
Check and revert back.
Regards
Mangalraj.S

How to delete Planned Order in APO

Hi,
How can I delete planned orders in APO? I already tried //RLCDELETE but it says "Order not in live cash" but I can see the order in //RRP3.
Let me know if you know another TCODE for this.
Thanks
David

Hello David -
Please use /SAPAPO/DELETE_PP_ORDER to delete planned orders.
thanks
Varun

Deleted Planned Order Trace

Dear All,
I have one query regarding Deletion Of planned order. Is there any Table or report where we can find out deleted planned order. In my scenario there were four planned orders of which user have converted one planned order into production order but other three planned orders are not appearing in Stock and Requirement List ( MD04). I want to trace these three planned orders whether they are deleted by user. I have tried in PLAF table but could not find out.
Regards
Sunil Kumar

Planned orders which are created temporally just to calculate the net requirement when you run MRP. Hence if you delete manually there will not be any record. If user has deleted the planned order dont worry, when you run next MRP run system will calculate the net requirement and create new planned orders.
If you want to restrict the deletion of planned order manually then try with authorization, use the following role
SAP_MM_CBP_PLANNED_ORDER for MM planed orders
SAP_PP_MRP_PLANNED_ORDER for PP planed orders.
Or one more option is create a planned order manually in MD11.

Deleted planned orders

Hi all,
we are having an inconsistency in our productive system.
Planned orders were manually deleted (by deleting PLAF table records).
Now dependent requirements exist in the Stock/Requirements list (MD04) for which no parent planned order exists and are not getting deleted with MRP run.
SAP Note 633119 makes a reference to an ABAP code to safely remove the erroneous dependent requirements. Can someone send it to me or tell me where I can find it?
Thanks and regards,
Max

Hi,
I assume that you case is number 1 - Deleted planned order (for Standard or Simulative DepReqs). If yes the in that note is written that you need to create an OSS message and SAP will send you a report customized for your problem.
Then create an OSS message in the component PP-MRP containing all the relevant information.
Cheer

Delete planned order and pr's

Hi, pls advise how to delete system generated (mrp) planned orders and pr's? incase the sales order is cancelled, we need to cancel those planned order or pr's generated earlier. pls advise how to delete the same.

Hi,
If the supply proposals are not firmed, then the next MRP run at plant level will clear all the planned orders / purchase requisitions which are not needed.
Planning mode with 1 should be more than enough to take care of that.
Regards,
Vivek

To find BOM from a closed Planned Order in REM process.

Hi,
Pl. let me know how to find Planned order no. and its BOM which has been closed?
In mb51 we get only Order no. which is not the pld ord and we cannot get the bom.
pl. help.

Hi,
Planned Order details are available in Table : PLAF.
Once you convert a Planned order into Production Order the Planned Order will be deleted from PLAF.
You can only view the Planned order number from the Production order tables AFPO/AFKO where you need to provide the production order number and get the planned order number (PLNUM).
If you want to find the BOM items of the planned order which is converted to Production can be known from the table : RESB, where you can provide the Planned order number fetched from the AFPO/AFKO tables.
Hope this will help you.
regards
radhak mk

Delet plan order through mass processing (cohv)

Similar Messages

Maybe you are looking for