Delet Requirment

Hi,
I am trying to change UOM for material
I have closed all open documents for material and also stock is ZERO in all plant, but there there is some stock in RESERVATION
how to make it zero?
I mean I want to remove this stock from reservation how to do that?

Dear Wish
You can try by scraping that reservation so that it will move out from there.
Additionally, please check this link which would be helpful to you
[Changing Base Unit Of Measure (Material Master) |http://www.sap-basis-abap.com/mm/changing-base-unit-of-measure.htm]
thanks
G. Lakshmipathi

Similar Messages

/sapapo/rm60rr20- Not deleting Requirements for some part numbers

Hi Friends,
We normally run /sapapo/rm60rr20- /sapapo/md74.....for reorganising independent requirements in SNP.
But we found that its not deleting requirements for some part numbers. Can any one please tell me why?.
Is this anywhere linked to master data?
Thanks
Krishna

In the main SAP menu under Master Data, there is a link to look at the change documents of master data. You may want to go to product change documents and see what are the changes that were made to the products where you are unable to reorganize the PIRs. There can be some common changes that you should be able to figure out.

BADI/BAPI/... for request deletion required

Hello,
Does anyone know if there is any BADI, BAPI or recommendable standard programme that I could use to have a request deleted (result should be the same like deleting the request in RSA1) based on the request number ?
Thanks for any advice.
Klemens G.

Hello Kishore,
Thanks for the 2 tips.
The BAPI you are mentioning will still keep the request entry visible in the administration tab of the infocube. Can I get it out of there as well like highlighting the request and clicking the "Delete"-button (which will remove the request and delete its associated data from the cube)?
Kind regards,
Klemens G.

Delete requirements in mass

Dear all,
Is it possible to delete the customer independent requirments in mass. In MD83 i have a lot of CIRs.I need to ddelte them in mass as the situation demands it.
please tell me how come it s possible.
karthick

Hello,
try MD74.
Regards,
Romé

Unable to Delete Data from ODS ---Tricky

Hi Frds/ BW Guru's,
I am trying to delete the request from ODS , I could see the job being scheduled for deletion, but finally the request is not deleted. What can be the reason for this and how can I go about from here, we have to do it in production.please respond soon .
Thanks,
Krish

Generally, I wouldn't think the deletion would be impacted by tablespace issues except for two scenarios -
With Selective Deletion, the BW deteremines how many rows you will be deleting and if it determines that it will be more than 10% of the rows in the tables, the BW decides that it is faster to copy the table, excluding the rows to be deleted, and then drops the old table and renames the copy to the original table names. In this case, there must be enough freespace in the tablespace to accomodate the temporary copy as well as the original table. I don't believe applies to deletion of a Request, only a Selective Deletion.
Request deletion requires temporary space in the Rollback tablespace. The database must maintain an image of the table before the deletion until the change is committed, so that in the event the deletion process fails or is cancelled, the deletes that were being done can be rolled back to restore the table to its previous state. Again, unless this Request held a very large amount of data, the amount of rollback space availalbe should not be an issue.
I would guess Authorizations is a good canidate for the cause. There was a fairly recent Note 810201 that allows for the creation of a new RSADMIN parameter that is designed to permit deletion of a Request, but NOT a Delete All Data.
Pizzaman

Bought a mac for my sons bday present of eBay :( it starts up in osx utilities screen, iv never seen the actual desktop(launch pad) I dnt know how to access the systemI know the basics for start up but says to delete files so I can dwnload the software?

AS above states the computer seems to run normally as far as turning it on, tabs & pages are fine. But I can't access the system to delete some files.. Which is what the 'error' keeps saying everytime I tr and download a helpful link/app or software.. The instal disc that seems to be stored on the comp says its mountain lion 10.8 install disk 'read only' & this is the only disc it gives me to select to startup.. I have the full software on USB as its very large.. So .. PLEASE TELL ME finally,
HOW to ... Access comp files to delete required memory for software install?? If this is the best option..
HOW to ... Erase everything on computer & install 10.8 via USB?
And when or what enables me to see and use this computer correctly..ie, launch pad? Etc..
PLease reply back in 'normal terms' as I'm already exceeding my boundaries of imac knowledge

First: no, you cannot use someone else's install DVD unless it is a retail version; all others are machine specific. It will not work and would be illegal.
Is this what you bought?
http://www.everymac.com/systems/apple/imac/specs/imac_cd_2.0_20.html
IF that is correct, then you are not on 10.8 because the highest OS it can go to would be 10.6
So, you'd either need the original install disks (preferred) or buy a retail Snow Leopard (10.6) - that is as high as you can go with that machine. And, your maximum RAM is 2 GB, so you couldn't go higher with the OS because of that either because it would not run well on 2 GB.
If you do get 10.6, then I'd suggest increasing the RAM to the max. of 2 GB.
If this is not the machine you got (maybe the seller just used any old box), then I'd suggest taking it to an Apple store/Genius Bar to have them sort out how to get out of this mess.

Delete Trans requirmts generated for delivery (Shipment done, without PGI )

HI Friends ,
I have came across below issue-
A Z delivery type is being used to ship Material to vendor for external processing (Goods issue is NOT done against the delivery but is done against a Process order , it is a type of dummy delivery. Requirements should not get generated for such delivery.
Because of error in configuartion, requirements were getting genearetd which is now corrected , now no new requirements are getting generated for this delivery type.
Now the problem is - How to delete requirements generated for old deliveries (Shipmentment has already been posted , PGI can not be done). These deliveries are now affecting MRP calculations significantly.
To my knowledge , such deliveries can be cancelled only after cancellation of shipment , the solution is not acceptable as there are thounsands of such deliveries lying in system & it would be practically impossible to follow this route for resolution of this issue.
Is there any program / quick way to delete these old requirements without cancelling shipment / without doing PGI ?
Please help, Thanks.
Edited by: sandeep K on Feb 12, 2012 6:59 PM

Sandeep,
Because of error in configuration, requirements were getting generated which is now corrected , now no new requirements are getting generated for this delivery type.
One wonders how the business was able to manage with these 'thousands' of deliveries (which had requirements) for so long, prior to the correction of configuration.,,,
Anyway, if you are lucky, simply rebuilding the requirements file may solve your problem. Run report SDRQCR21 against these materials. Otherwise, for a mass change, you will probably need to develop some custom functionality.
Best Regards,
DB49

Delete condition type records from PO

Hi all,
I have put custom fields ( for condition type ) under customer data tab in PO (ME21N) line item.
While creating/changing PO, I have to delete condition records under conditions tab based on the custom fields which I have defined in the customer data tab.
Is there any badi or function module to delete required condition records in PO?
Thanks in Advance.
Udaya Madhav

Hi uday,
Please Use the FM
RSDRD_SEL_DELETION
Hope this will be Helpful
Thanks
kalyan

Delete temporary tables from namespace /BI0/0W - Failed to delete BPC Dim

Hi guys,
we have a problem while trying to delete a BPC Dimension which is no more used in any Application.
Dimension deletion fails because BW InfoObject deletion fails. From SLG1 we see there are some reference still in use.
Data Element /B28/OIJ2D30F1 is used in a couple of tables (/BI0/0W00000231 and /BI0/0W00000233).
These tables seems to be "where used list" tables.
We found an OSS Note [1042921|https://service.sap.com/sap/support/notes/1042921] related to DB6.
But it is not suitable: we are on ORACLE.
Anyway it says:
you may have to delete temporary tables from namespace /BI0/0W*, which also use the data element
These are exactly our symptoms
Does anyboy of you know how to delete this tables in /BI0/0W namespace?
Package is blank
SE11 -> Delete requires to register the object (created by BPC_ADMIN)
Thanks in advance
GFV

in the table ddd02l you can see the temporary table..
TCode db02, you can ask your basis team to delete temp table...you can see it 'under missing table and indexe'

Delete transf reqmt generated by delivery(without cancelling shipment/PGI)

HI Friends ,
I have came across below issue-
A Z delivery type is being used to ship Material to vendor for external processing (Goods issue is NOT done against the delivery but is done against a Process order , it is a type of dummy delivery. Requirements should not get generated for such delivery.
Because of error in configuartion, requirements were getting genearetd which is now corrected , now no new requirements are getting generated for this delivery type.
Now the problem is - How to delete requirements generated for old deliveries (Shipmentment has already been posted , PGI can not be done). These deliveries are now affecting MRP calculations significantly.
To my knowledge , such deliveries can be cancelled only after cancellation of shipment , the solution is not acceptable as there are thounsands of such deliveries lying in system & it would be practically impossible to follow this route for resolution of this issue.
Is there any program / quick way to delete these old requirements without cancelling shipment / without doing PGI ?
Please help, Thanks.
Edited by: Csaba Szommer on Feb 12, 2012 4:41 PM

Sandeep,
Because of error in configuration, requirements were getting generated which is now corrected , now no new requirements are getting generated for this delivery type.
One wonders how the business was able to manage with these 'thousands' of deliveries (which had requirements) for so long, prior to the correction of configuration.,,,
Anyway, if you are lucky, simply rebuilding the requirements file may solve your problem. Run report SDRQCR21 against these materials. Otherwise, for a mass change, you will probably need to develop some custom functionality.
Best Regards,
DB49

SAP PP-delete Production orders, planned orders, purchase requitions & othe

How to delete Production orders, planned orders, purchase requitions & other orders .
Pls send me the T-codes or Paths.
Any comments welcome & Thanks in advance.

Dear,
1) Delete Production Order,
Please refer this link,
[DeleteProduction Orders |http://www.sap-img.com/production/how-to-delete-old-production-orders.htm]
2) Delete Planned Order,
MD16 is the only option to delete planned orders in mass.
During MRP run if you choose - Delete and recreate plan order mode. Automatically the unwanted plan orders
2) Delete Purchase Requisation,
Execute MD04, in that it will display the created PR's
Check in tcode MD62 whether you have any demand for that material which you are getting PRs first delete requirement here/
Then run MRP by tcode MD03 or MD02 giving input of material and plant. In the initial screen of MD03 / MD02, make field planning mode - Delete and recreate planning data
Is that Old PR Firmed.
If yes remove the Firm indicator and Re run the MRP with planning Mode 3.
It removes the PR from EBAN.
Now check in MD04
OR,
Use Mass change transaction code MEMASSRQ or use BAPI (BAPI_REQUISITION_DELETE) to do the same.
Or
Use ME57 with layout ALV, in this also u can delete PR
If you want delete PR manually then
goto ME52N --> enter PR number --> select line item --> click delete button
or
goto ME52N --> enter PR number --> Item --> Tab Quanties/Dates --> set tick mark for closed check box
Please check this thread,
Deletion of SubReq
Hope it will help you.
Regards,
R.Brahmankar

Can delete music...but not the file

Alright, I've tried searching the glorious internet for help, but it don't work. I'm having a problem with iTunes 11.1.3.8 where I can delete music from iTunes perfectly fine, but it won't delete the file from my PC like it used to. And yes, I've tried every possible delete button. All of them. So don't suggest that. Please. Anyways, I have a bunch of duplicates and bad quality songs in my library that I'm trying to clean out. I'd just delete the file myself but since it's a dupe I don't know which one it is and I'm not up to guessing. It's really getting on my nerves and I just want some help before I have an aneurysm. I'll keep you guys updated if I find a solution.

Jib,
When you delete a track from your iTunes library, iTunes will offer to delete the file too, but only if the file is in your iTunes Media folder. If the file is located elsewhere, iTunes will just leave it alone.
If you have files outside the iTunes Media folder, deletion requires a slightly more complicated procedure: right-click the track, Show in Explorer, delete the file, then back to your library and delete the library entry.

Reasons NOT to Perform Deletes First?

I ran into a problem where I was creating objects with a unique key in the same UnitOfWork where I had previously deleted an object with the same values for the unique key (the constrained columns are not in the mapped primary key). I solved the problem by calling setShouldPerformDeletesFirst(true) on my UnitOfWork. Since I hate special cases, I'm wondering whether we should perhaps just set this by default when we create a UnitOfWork. The code that creates the UnitOfWork doesn't know what will be performed in it, and the code that wants to performDeletesFirst doesn't know what else might be done in the same UnitOfWork, so it would be nice to have a consistent policy. Are there any drawbacks or potential conflicts with setting this value by default?

PerformDeletesFirst is definately not to be used all of the time. It is designed only for the case that you described. In fact, I recommend that you avoid creating objects with the same pk as one that ever existed in the uow. If you have to do it, then you will need to use perform deletes first, but only for this case.
If you always use performDeletesFirst, you could run into issues in cases where a delete requires an update first.
Consider:
A a = (A)uow.readObect(A.class);
B b = a.getB();
uow.deleteObject(b);
a.setB(null);
This will attempt to delete before the update is fired potentially causing a constraint error...

I inadvertently deleted system files and my computer won't start up

I was cleaning up the hard disk and deleted what I thought were some redundant systems/library files. After restarting the computer, I realized I must have deleted required files because the computer will not restart. The disc is full and these files are sitting in the trash bin. When trying to use the Leopard install disk to reinstall/recover, the macbook doesn't have enough disk.
Not sure what to do now. Any suggestions?

My Mac has got 2 System Folders on it
That's impossible. Two folders cannot have the same name. Hence, you do not have 2 System Folders. You may have a folder with a different name but similar, but computers will not be confused.
Anyway, this isn't the reason your computer will not boot.
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key. See if you can get this to work.
Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
is being checked.
http://support.apple.com/kb/ht1455
I suspect disk corruptions.
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.

Insert Opportunity - Product Revenue Child using WS2 - SBL-EAI-04316 error

Hello,
I´ve got the following error message trying to insert a product revenue child object to opportunity using WS2.
Fehler beim Übertragen der Daten ins CRM on Demand!
Tue Apr 26 08:06:21 CEST 2011 :: Fehler bei der Verarbeitung von Argument (Error while processing argument) urn:/crmondemand/xml/Opportunity/Data:ListOfOpportunity für Operation OpportunityInsert(SBL-EAI-04316) :: Error at thread 27334345
Using SOAPUI the insert are successful.
<soapenv:Body>
<ns:OpportunityInsert_Input>
<data:ListOfOpportunity lastpage="" recordcount="">
<data:Opportunity operation="">
          <data:ExternalSystemId>0010110107664043232</data:ExternalSystemId>
          <data:ListOfProductRevenue lastpage="" recordcount="">
<data:ProductRevenue operation="">
<data:Id></data:Id>
<data:CurrencyCode>EUR</data:CurrencyCode>
<data:StartCloseDate>00:00:00</data:StartCloseDate>
<data:OpportunityName>4043232</data:OpportunityName>
<data:AccountName></data:AccountName>
<data:stpvstums010>ÖLSERVICE ALL INKL. 5W-40</data:stpvstums010>
<data:PurchasePrice>4960</data:PurchasePrice>
<data:ProductName>Filter/Oel</data:ProductName>
<data:ProductPartNumber>09XXXX</data:ProductPartNumber>
<data:OpportunityExternalSystemId>0010110107664043232</data:OpportunityExternalSystemId>
<data:ipvzahlums002>100</data:ipvzahlums002>
<data:ipvzahlums001>1</data:ipvzahlums001>
          <data:ExternalSystemId>0010110107664043232001</data:ExternalSystemId>
<data:cpvwhrums002>0</data:cpvwhrums002>
<data:cpvwhrums003>4960</data:cpvwhrums003>
</data:ProductRevenue>
</data:ListOfProductRevenue>
</data:Opportunity>
</data:ListOfOpportunity>
<ns:Echo></ns:Echo>
</ns:OpportunityInsert_Input>
</soapenv:Body>
</soapenv:Envelope>
Trying to insert the child via webservice 2.0 the request fails (see error message above)
I'm running out of ideas because I'm using the same values with the webservice request.
thx in advance
kind regards
Klaus

Hello,
I've solved the problem. It seems to be that the axis framwork has some problems to handle the complex structure of the opportunity object respectively the containing array structures (Lists). We rebuild the webservice client after deleting the unnecessary elements from the opportunity wsdl file. Doing so the webservice client works as expected. Be careful to not delete required fields which are necessary for the response message, e.g.:
- ModifiedBy+
- ModifiedByID+
- ModifiedDate+
- CreatedBy+
- CreatedByID+
- CreatedDate+
- ModId+
- Id+
I`m sure that this cannot be the preferred way to solve the problem - but it works for me.
regards
Klaus

Delet Requirment

Similar Messages

Maybe you are looking for