Delete a attribute not needed according to schema? (JAXB)

Hi.
I unmarshal an xml-file, and i want to delete a attribute not needed inte the file according to the schema. Is it possible to get rid of the attribute when I marshall or do i set it like this service.setAttribute("") and still have it there but with no data?
thanks in advance.

Yes, you can delete pages that are not needed, see this help text :
Add, remove, move pages  http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkc0bbefcc
Only, the book needs a minimum number of 20 pages.
And when you want to upload it for printing, make sure, that you have plenty of free storage. Typesetting the book will need a lot of space on your device.

Similar Messages

  • My ipod deleted all my notes and I REALLY need them back! How can I get them back!?

    For some reason my ipod touch 5 deleted all my notes and all the mail in my inbox its all gone. I do not have the iOS 6.1 update though. So I dont know how this could have happened. I have not backed up my ipod to my computer since I got it because thats not how I use it. But my sisters ipod 4 also for some reason had my notes downloaded onto hers? And she has recently backed up her ipod on the computer. But once the notes on mine were deleted so were hers. But since she has recently backed hers up maybe I can restore the to her ipod then to mine. If so how would I do this? I really need those notes back they were REALLY important! Thanks!

    Your only hope is restoring from the bakup of your sister's iPod. For how see the restoring topic of:
    iOS: How to back up

  • I am trying to clear files from my computer. I have a bunch of .m4v protected files that will not delete. They are lectures from college that I do not need anymore and would like to delete them to make room on my computer.

    I am trying to clear files from my computer. I have a bunch of .m4v protected files that will not delete. They are lectures from college that I do not need anymore and would like to delete them to make room on my computer. I have looked at the help sites and they seem to give directions to change files that people are saving in the future and not regarding past files. I am unable to change anything about the file including the name, so I can not change these past files from .m4v to something else which is deletable such as .mp4 etc. Any help would be much appreciated!!!!

    Well, most of what we can tell you is already stated in the message you are getting.  A phone can only sync with one library at a time.  You have apparently synced your phone with a different iTunes library in the past, or changes have been made to this library so the phone no longer recognizes it as the library with which it was synced.  To know which you will have to provide the information.
    If you bought them using the AppleID you use with this phone it may simply be easier to re-download them directly to the phone rather than sync them, though you will want to resolve that issue at some point.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519

  • Trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed

    trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed
    please help
    [email protected]

    The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
    I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
    As for the Scan button not working, the following is documented by HP
    Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
    But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

  • I inadvertently created a very large file. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ?

    I inadvertently created a very large file on my hard drive. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ? I re-installed the OS but the file was still there taking up needed space.

    Command-click all of the files you want to delete and don't actually move them to the Trash until you've gone through the entire folder.
    (63341)

  • Can not delete marketing attribute set

    I am trying to delete an 'Attribute Set' & Attribute.  I have managed to delete the attribute but when trying to delete the attribute set i get the error - Attribute Group ZIC_PTS_BP Still Contains Business Partners.
    I have ran - CRM_MKTPFTPL_DELETE_ATSET which seemed to delete all the assigned entries but I still can't delete the attribute set
    any ideas?
    regards
    Barry

    The attribute set is not geeting deleted since it has been assigned to some buisiness partners, which can be seen in the marketing attributes tab page of the business partner.
    Delete the assignment first, than only you will be in a position to delete your attribute set.
    *If helpful, Do reward points*
    Regards,
    Shalini Chauhan

  • Deleting not needed objects after impl. of a solution

    Hello everyone,
    some time back, we developed a solution in BW7.0. All queries, reports are working fine.
    We don't need to feed our data targets anymore. In order to keep these upward queries operational, We want to keep only needed objects i.e. cubes, Multiproviders, DSOs...etc while delete everything else which are not needed like DSOs, transformations, routines, DTPs, Process chains...etc.
    What could be no. of steps to consider and how to access the impact of deleting any object. Any guidelines?
    Thanks
    Ahsan

    Hi,
    Thanks for replying. We don't need to update data. Queries are using data from certain Multiproviders where data are residing in IC, DSOs and InfoObjects.
    Main thing to check is: if an Active table of a DSO is being used in any routine of another transformation or anywhere else which we don't want to delete. This is like doing the impact analysis of a deletion of a DSO. If a DSO being used under MP1 and here we say we want to delete it, but then may be this DSO is being used under MP4 where we want to keep it, end decision keep the DSO.
    Following a post on SDN, I checked in RSAABAP table by giving active table of a certain DSO and it shows no entries. But I am sure we have used this DSO's active table in some routines.
    Any input, please share
    Thanks

  • Is it possible to delete off the desktop I will be using this phone for business, therefore I will not need itunes, appstore, game centre, weather, newstand, passbook, stocks, maps, camera, music etc. please advise.

    Is it possible to delete off the desktop I will be using this phone for business, therefore I will not need itunes, appstore, game centre, weather, newstand, passbook, stocks, maps, camera, music etc. please advise.

    The App Store has many useful business related apps: Word processors, spreadsheets, presentation apps, CRM apps. Maps is useful for navigating to appointments. Newstand for reading periodicals related to business.

  • How can I delete apps on my cloud?  My kids added a bunch we do not need.  When i go to puchased apps, there is no option to delete, just the option download from the cloud.

    My kids added a bunch of apps we do not need.  When i go to puchased apps, there is no option to delete, just the option download from the cloud.

    You can't.  Items on the "cloud" are just a visual representation of your purchase history.    You can never delete them, as Apple uses this list to determine what Apps you have access to for free should you ever need to re-download them.
    You can hide Apps from that list trough iTunes on a computer though.
    iTunes Store: Hiding and unhiding purchases - Apple Support
    However, Apps do not take up space in your iCloud so no real need to delete them.

  • Just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password

    just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the  password so I couldnt delete it. I need help deleting it without a password.

    If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
    http://iforgot.apple.com
    If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
    If that's not the "password" you meant, please post back and clarify.
    Regards.

  • I just plugged my iPhone into my MacBook and all my notes were deleted. I desperately need them, where are they?? Thanks

    I just plugged my iPhone into my MacBook and all my notes were deleted. I desperately need them, where are they?? Thanks

    If your MB isn't the computer you usually sync with, the notes were deleted and not retrievable.  Do you backup with iCloud?

  • Using the Null function to delete an attribute from a user in the metaverse

    RC1 Update 3 adds a new Null function, which (to me) sounds like it should flow a null value into the destination attribute.  I have a case where i am flowing a date from SQL into the metaverse.  Just for testing, I tried a basic flow of:
    Null()->employeeEndDate
    This seems to function the same as this:
    ""-employeeEndDate
    Both will add the employeeEndDate attribute to the metaverse object with a blank (not null) value.  To me, Null() seems like it should be equivalent of mventry("employeeEndDate").Delete, but it doesn't seem to.  Ultimately, what I want is to flow the value in if it is present in my connector space, and delete it if it is not.  Something like this:
    IIF(IsPresent(TermDate),DateTimeFormat(TermDate,"yyyy-MM-ddTHH:mm:ss.000"),Null())
    Anyone have any thouse on this?  Is there an easier to way to do this that I am overlooking?
    Thanks,
    Keith

    So here is a new update on this, with somewhat of a workaround.  I ran into a scenario where I wanted to delete attributes upon removal of a sync rule.  Unless I am missing something, this can't be done normally.  When my sync rule is removed,
    the attributes are no longer flowed from the MV to the CS, but they aren't removed from the object in the CS either.
    My Scenario:
    Only certain users should flow their location info to AD for display in the GAL.
    My Solution (these aren’t the real Set/Rule/WF/MPR names, it just makes it easier to understand):
    1.      
    Create two sets: “Show Info” & “Hide Info”
    2.      
    Create Sync Rule: “Flow info to AD”
    a.      
    Dependent on a Sync Rule “AD Base”
    3.      
    Create Workflow “Apply Flow Info to AD” to apply “Flow Info to AD” Sync Rule
    4.      
    Create MPR to apply the “Apply Flow info to AD” Workflow on Transition In to “Show Info”
    5.      
    Create a new Metaverse attribute for people called “nullString”
    6.      
    Create Sync Rule: “Null Info to AD”
    a.      
    Dependent on “AD Base”
    b.     
    Flows the nullString attribute to all AD attributes that need to be blanked out
    7.      
    Create Workflow “Remove Flow Info to AD” to remove “Flow Info to AD” Sync Rule
    8.      
    Create Workflow “Apply Null Info to AD” to apply “Null Info to AD” Sync Rule
    9.      
    Create MPR to apply “Remove Flow Info to AD” and “Apply Null Info to AD” Workflows on Transition In to “Hide Info” set.
    Obviously, you’ll need a null MV attribute for each data type you need to blank out, but it works.
    I haven't tried it, but it's likely this could also be done on inbound flows, provided you have unused attributes of each type in your data set (with a view you could
    just create them).  If X, then flow regular attribute from the CS in to the MV; if not X then flow the "null" attribute from the CS into the MV.
    Keith

  • Need to know schema name and table name associated with a column-URGENT

    Hi folks,
    I need to know the schema name and the table name associated with a column. Though jdbc has the api to getTableName and getSchemaName, some database vendor like oracle does return empty upon call of mentioned methods. I found that oracle driver does not support that ……
    Can any one give me the solution? It is urgent. Or do you suggest any third pary jdbc driver which can provide those?
    Thanks
    Angelina

    Angelina,
    Your question has been discussed several times previously in this forum. Search this forum's archives for "getTableName". Oracle JDBC driver does not implement this (because "it is not feasible" -- according to Oracle).
    First of all, I would suggest that you could probably change your application's logic so that you would not need this functionality (but I guess that is not feasible either, right :-)
    Alternatively, you could try querying the Oracle database data dictionary.
    Good Luck,
    Avi.

  • How to delete an attribute?

    Hi Experts,
    We are on SRM 5.0
    How to delete an attribute from Attributes tab of Organization/ Position or User?
    For eg: The attribute Catalog ID i.e. CAT is there at Organization level, Position and also User levels.
    Suppose there are 3 Lines for CAT in Attributes tab. I want to delete one..how to do this?
    I tried using the FM BBP_UPDATE_ATTRIBUTES By passing only one record in IT_ATTR_P and setting REPLACE_P flag but it does not changes anything.
    Thanks for the help,
    Anubhav

    Hi
    i believe CAT value  is a case sensitive field .
    Why are you using FM to update the ATTRIBUTE values?
    Corporate - Dont want to keep this value for as CAT . if you dont want this catalog value.you need to find out where in the root and make it disable or Delete it.
    some sample code
    https://wiki.sdn.sap.com/wiki/display/SRM/CodeSample3UpdatingExtendedAttributes(Storage+Location)
    what is your business requirement ? Dont want Corporate catalogs any more for all the users?

  • I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

    I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Maybe you are looking for