Delete a PERNR data

Hi all,
If i want to delete a PERNR i will go to PU00 Tcode and give the pernr no. and select the respective infotypes data and delete. From this it is not possible to delete the PD(Org. Management) data,I mean the data will be remain in HRP tables for that particular PERNR.
But how can we delete for a range of PERNR's like 1 to 10 and how we can delete the PD data also ?
Thanks in Advance.
Regards,
Anil Kumar.

Anil,
The PD data is not deleted because PD data is not linked to the personnel no. PD data(Only HRP infotypes, P**** Infotypes are anywyas deleted) is linked to the positions. Even if the person holding a position leaves the org, the PD data remains as such and this is one of the most important concept in SAP HR which ensures that only the right persons have the access to the data, because authorizations are not given to the persons but to the positions. Persons get that authorizations only because they hold the position with the authorizations.
If you want to delete PD data also, you will have do the same using position as the base and deleting all the entries in HRP1001. But why would you want to do so? It wont serve any purpose.
My suggestion - Delete PA data through PU00 and leave PD data aa it is, unless of course, you have a peculiar business requirement.
Regards
Lincoln

Similar Messages

  • Deletion of master data for 0CS_ORDER

    Hello Friends,
    I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
    When I try to do this, I get the msg that some master data could not be deleted.
    This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
    In dev, I have deleted the master data using SE14 for tables P, S , X, T.
    My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
    If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
    What can be other possible ways??
    Please share your opinions.
    Many Thanks,
    VA
    Edited by: Vishwa  Anand on Sep 2, 2010 5:36 PM

    Definitely Yes.
    It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
    So do not use SE14 for deletion of MD. This is very specific to use.
    You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
    Hope this is clear for you..

  • Deletion of master data with / without SID

    Hi Experts,
    Client have requested for master data clean up.
    Requirement:
    "Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
    Steps to be taken:
    1. emptied/deleted content of all the cube.
    2. delete data from master data
    Help required:
    What will be impact of deleting master data with SID when DSO data is not deleted.
    What if i choose without SID option for deletiing master data
    Regards
    Suresh Kumar

    Hi Suresh,
    Deleting master data is one critical job and ned to be very care ful.
    First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
    System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
    If you are deleting the TD and  master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
    Go thru the below thread, this gives you lot if info on MD deletion.
    [Re: SID Tables]

  • If i click to turn off my backup and delete all backup data will I lose everything on my ipad? or will it just no longer be stored in icloud?

    currently my iphone and my ipad share data in my icloud account. if i click to turn off my back up and delete all backup data, what will happen? will i lose everything on my ipad, or will it just no longer be stored in icloud?

    It will only delete your backup from iCloud.

  • I deactivated my apple id and want to add another id to my icloud acc,how can I do this without deleting all my data from my ph?

    There is an option to delete the account, but then it says it will delete all my data, which I dont want to happen.

    When you delete icloud account off your phone it will ask you if you want to keep or delete the data. You will choose to keep and will be ok. The only thing that will reset is photostream, so if that is a concern, back up your pictures.

  • I lost my sync key when my harddrive was wiped, so how do I get a new sync key without deleting my saved data?

    I synced my firefox bookmarks so that I could reupload them if ever my computer got wiped, so I don't have a second device with the sync key on it. I made the mistake of only saving the sync key on the computer. I just got my computer back from the shop and they wiped my operating system without asking. Now I don't have my sync key and the only way to access my sync account requires that I change the sync key and delete all the data saved on the server. How can I get access to my data?

    Sorry, without your Sync Key your data is worthless, it can't be de-crypted, and creating a new Sync Key will wipe it from the Sync server.
    BTW, the Firefox Sync service isn't meant for "backups", it is meant to synchronize your Firefox data between different "devices". Any chance you had more than one device setup with that Sync account? If so, you can use the Sync Key from that device.

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How to delete the master data of a Customer created in a SALES AREA?

    Hi All,
    I've deleted a Customer (master data) by t.code OBR2. But it exists again in its SALES AREA.
    Could anyone tell me how to delete it in the sales area too?
    Thanks

    Hi,
    I dont think you can delete a customer. you can market it for deletion in XD06.
    for deleting customer master data you have to setup an archiving project.
    Also check the similar thread
    doubt in obr2
    Hope it helps you.
    Regards,
    Sats.

  • How to delete back up data in icloud?

    How to delete back up data in iCloud?

    From previous posts:
    If you mean backed up in your iCloud backup, you can delete the backup by turning off iCloud Backup in Settings > iCloud > Storage & Backup, then tap Manage Storage, touch your backup and tap Delete Backup, then go back and turn iCloud Backup back on again.
    If you mean data synced to your iCloud account like contacts and calendars, you can either delete if from your device or go to icloud.com on your computer and delete it there.

  • How to delete the Transaction Data in CRM

    Hi Gurus,
    I have a requirement to delete the Transaction Data in one Client.
    But Configuration should be as it is ?
    How can i over come this situation?

    HI.
    Do you mean refresh the client ? if that is the case, i think you are posting in wrong forum since this one is for People Centric User Interface. Try in   Customer "Relationship Management (CRM) - General & Framework".
    Best Regards.
    Armando Rodriguez.

  • How can I delete an ODBC data source after 10g client has been uninstalled?

    I uninstalled the 10g client and now when I attempt to delete the ODBC data source, I get an error: "The setup routines for the Oracle in Oraclient10g_home2 ODBC driver could not be found. Please reinstall the driver. I re-installed the client and I get the same error, but I had to specify a new home. I still get the error. Anyone have an answer or a workaround to deleting the ODBC entry so that I can re-create with the same name later under the 9i client?

    I have the same problem... and nobody gots the point:
    1st. the ODBC and the client/home exists on the machine...
    2nd. the client/home is unistalled and so...
    3rd. tada! Now we have a impossible-to-unistall ODBC entry!
    That is happening on a Windows, at last to me...
    Please, help us if someone knows how to remove this ODBC entry... if know how to DO the stuff (permissions, system, all that things is answered above).
    Best regards,
    Bruno Araujo

  • How can i restore old backup without deleting my existing data

    how can i restore old backup without deleting my existing data. unfortunately i have deleted few of my old photos and restored them from my old backup. i got the deleted photos but lost my recent data and photos. how can i get those too.

    You cannot. However, if your back up is through iTunes on your computer and you do an internet search for something like "iPhone BackUpExtractor", I believe there is software that will help you access the SQL database that is your back up. You may be able to pull out what you need.
    Once you restore from a back up, any data that was on the phone is gone.

  • I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data.  How can I retrieve all the lost data??

    I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new).  How can I retrieve all the lost data?? Please help!!

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    dglenn9000 wrote:
    I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
    Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

  • How to delete the Hierarchy data from Infoobjects.

    How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
    When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

Maybe you are looking for