Delete a request from the Data Store Object,

Hi Experts,
We recently upgraded our BW3.5 to NW2004s and I tried to load data into my DataStore. I am trying to delete an invalid request and it does not allow me to delete it.
Can someone help me with this?
Thanks in advance

Try deleting this request from the PSA as well.
On DataSource -> rc -> Manage
Find the request number and delete it.
Also go and delete it from DataStore Object.
Next time when you run DTP you wont have this request.
Hope this helps.

Similar Messages

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

How do I delete an app from the App Store on the iPad?

Hello All
I'm trying to delet a free app I downloaded from the App Store on my iPad. How do I do this?
I first opened up the App Store on the iPad and tapped on the"Purchased" icon. However, I can't seem to find anway to delete it from there. Is there a way to do this? I also went to my iTunes on my computer and I was able to delete it from there. After I did that I plug the iPad into the computer to update it hoping that the update would remove it but it didn't. Any help here would be appreciated.
Thanks
daram63

Hold an icon untile they all wiggle, then tap the "x" in the corner.
iPad User Guide (For iOS 5.0 Software)

How do I delete my podcast from the itunes store?

I submitted a podcast to iTunes, but have since deleted the account on the website I was using to host the podcast. Whenever I try to use the report a concern option to delete the podcast from the iTunes store, it tells me to go to the RSS feed and change it, but I cannot do this since I have deleted the account to the website where I would change the RSS feed. What should I do?

Email Support at podcasts 'at' apple.com and ask them to remove the podcast, explaining that you cannot access the feed. In any case, as I assume the feed is no longer accessible by iTunes, the podcast will get removed eventually anyway.

HT1918 how can i delete credit card from the itunes store?

I prefer just to use gifts cards instead of my credit card but itunes wont let me delete my credit card information, and now I cant even redownload applications that i have previously purchased on my ipad. How can I delete and leave my account with no credit card info?

Moorside01 wrote:
I have the same issue. My son has an iPod Touch, but it seems that he has to have a credit card associated with the Live ID
Live ID is for Microsoft.
Are you saying you do not have the None option when you review his payment info?

Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Delete my account from the Apple Store

Hello apple
I wanted you to cancel my account apple store
if you can erase, please erase
thank you

No need to keep posting the same thing again.
Hello apple I wanted you to cancel my account apple store if you can erase, please erase thank yu

Need to delete the SPAM requests from the import queue

Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju Sam

Dear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number   Request      Clt   Owner          Short Text
     1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
     2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
     3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
     4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam

Delete overlapping requests from cube not working in processchain.

In a process chain, 'deletion of overlapping requests from the cube ' step is used.
Before this step a DTP step runs with a full update to load the cube. This process chain is scheduled every day.
Issue is, the process chain failed at the DTP step and after correcting and repeating, the step got executed.
However, the next step after the DTP,'delete overlapping requests from the cube'
gets executed but without deleting the previous day's request.
In the step details a message that 'No request for deletion were found' can be seen.
Then next day when the DTPstep is executed without any problem the 'delete overlapping requests from cube' step is successful
and the previous requests from cube are deleted.
the deletion selections in the step ' delete overlapping request from infocube' is
Delete existing requests
Conditions:
only delete requests from same DTP
Selections
Same or more comprehensive
Because of this issue on a particular day because of the presence of 2 days requests the data is getting aggregated and shown as double in the reports.
Please help.

Hi Archana,
When you delete the bad request from target and before repeating your DTP in PC, make sure the bad request deleted from table RSBKREQUEST also.
If you find the same request in table, first delete the request from table and repeat the DTP in PC.
Now Delete overlapping step should work.
As this is not the permanent solution, please raise an OSS for SAP
Regards,
Venkatesh

Selective deletion of request from ODS which is activated and updated

Hi all,
I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
Many thanks in advance,
BRB

Hi
Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
Regards,
H.J.

Process Maintenance: Delete Overlapping Requests from InfoCube

Hi Experts,
How can I open Process Maintenance: Delete Overlapping Requests from InfoCube Screen? What's T-code? Is that in Process Chain? Please tell me that....
Thanks in advance,

Hi
'Delete overlapping request' is an option(its a process type) in the process chains..
RSPC>Process types>Load Process and post process folder--->Delete overlapping request from the infocube..
here you can have more options like 'source systems are same',and infosources are same etc...
How to delete most recent request in a Cube by using process chain
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 28, 2008 11:35 AM

Delete overlapping requests from info cube

Hello
I am getting a issue sometimes where the process chain fails to delete a request from the cube on the conditions i have given in this process type. Now i have been digging into this but cannot find much of why would this happen.
Please can someone tell me if this is a known issue to you. Also please can someone give me some details on which program name gets generated when we pull this process type in a process chain. what i mean is what is the program running for this process chain as i want to debug and see how does this process type delete the request.
thanks

check the class CL_RSSM_REQUDEL and method IF_RSPC_EXECUTE~EXECUTE

How to delete a noncompress request from the aggregates

hello gurus
i have a request in an infocube, which is not compressed in the cube. i rolled up the request, so that the data will be moved to the aggregate. is it? then i found that the data is inconsistant. so i delete the request from the infocube manage scree, under the request tab. now my question is whether the data will be deleted from the aggregate or not?
thanks in advance
rams.

If the Request has not been compressed in teh cube or the aggregate, you should simply be able to delete the Request form the Cube and it will be automatically deleted form teh Aggregate. Since it has NOT been compressed in the aggregate, it should be a very quick process - no need to deactivate the aggregate.
If it has been compressed in the aggregate, but not the InfoCube, you should still be able to delete the Request form the InfoCube, but the BW will have to refill the aggregate. It should do this on it's own, but at differnt sopport packs, I had some problems with that always working. As others have mentioned, in this case you could always deactivate the aggregate, the delete the Request from the InfoCube.
As yo ureview this situation, you should consider how often you have/might have a problem like this. If it occurs very often, then you should have your aggregate(s) for this cube setup so they do NOT automatically compress after Rollup. Instead the Requests in the aggrgate will only be compressed when the Request in the InfoCube is compressed.

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

Delete Overlapping Requests from InfoCube: Before or After the Generate Ind

Hi,
Delete Overlapping Requests from InfoCube Before or After the Generate Index of the Infocube? Why?
I think "After", but the system (transaction RSPC)suggest 1.Generate Index 2.Overlapping Requests from InfoCube ...
Thanks
Alessandro

Hi Alessandro,
Bottom Line Index will speed up the Process. While loading the Data you need to delete the Index.
Index will degrade the performence while updating or modifying DB Entries(Loading). Index will improve the performence while reading the DB(Reporting).
It's not with BW. all RDBMS need this.
Regards,
Nagesh.

Delete a request from the Data Store Object,

Similar Messages

Maybe you are looking for