Delete all files in a directory not working for some files

I have a requirement like wants to delete all the files in a directory. (These files got generated through some other program.)
Problem is file.delete() is returning false for some of the files..
(donno the reason .. could be bcoz of file closing issues/locking issues.)
Looking for a solution where i can delete a file forcefully irrespective of whether the file is opened or not.
Thanks
Srini

are you on windows? if so, it's almost impossible to delete something another process has open.

Similar Messages

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

In Robohelp 9, search does not work for some Vietnamese characters.

In Robohelp 9, search does not work for some Vietnamese characters.

I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
If you need a more immediate response, you would need to take that up with Adobe support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Encode Video Files not working for avi files

Hi,
I've been trying to convert some .avi files to apple format using Lion's native 'Encode video files' function however keep getting a 'avconvert: source file not found for source file://fileparthhere avconvert: failed to create an export session. Check setup
I can't work out why as this has worked before in Lion and works fine for other video formats. The only thing I've done is remove Final Cut Express HD and can't add it again as I don't own it anymore
Suggestions? Is there a encoder to make this work or should it work anyway?
Thanks

If you click Yes the project file will be updated when you save it. That has nothing to do with the media.
Are the Lesson and Media folders still in the Book Files folder (or whatever it's called)?
Select one of the clips in the browser and use Edit>Item Properties. One of the first lines is Source. That gives you the file path for where your media is supposed to be located. What does it say? If nothing is there, use the File>Reconnect function and point the application to where the media is located.

Oracle text search not working for WSDL files

I have a table (resources) with blob data type column (xml_data) and I've created context type index on that column. I've XSD and WSDL files stored in that blob column.
I can search XSD and XML files with a query with contains operator. But any search on the words from wsdl file returns zero results.I am not able to perform search on wsdl file.
Please advise me whether oracle text can work for WSDL files also ?
Query details
===========
create index myIndex on resources (xml_data) indextype is ctxsys.context;
select * from resources where contains(xml_data, 'searchword') > 0
Thanks a lot,
Santhi

Even though it isn't listed specifically, I can't see why it wouldn't work. The WSDL file should be a simple XML file, so in theory it shouldn't be any different to Oracle Text than the XML file that you loaded and searched successfully. Did you get any errors during indexing, and what do your tokens look like in the DR$MYINDEX$I.TOKEN_TEXT column?
Do you have a mini test case that didn't work for you? Perhaps we could play with it a bit.
Long term you might want to consider using section groups so that you can search "within" tags.
-Ron

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

How do you save data into an excel file while myRIO is acquiring data? I tried saving it using "Write to file" but it doesn't work for some reason.

I am acquiring cosine wave and a pulse wave as input and I want to store their peak to peak values into an excel file. "Write to File" is not working for it. Is there any other vi which can be used for data logging?
Thank you for your help.

Hi Ssheoran,
Can you provide more detail when you say that the Write to File VI doesn't work? Is there an error given? Or can you just not find the file on your computer? Keep in mind using this file in a Real-Time VI on the myRIO will save files on the myRIO. You will then have to transfer to your PC. Please view the following video as a guide for saving files and transferring them to your computer: (http://www.youtube.com/watch?v=BuREWnD6Eno). Hope this helps.
Best Regards,
Roel F.
Applications Engineer
National Instruments

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

Get Crash Reporter EVERY time I try to open Firefox. Installed latest version and disabled or deleted all add-ons. Still not working.

Updated Firefox to latest version and disabled or deleted all add-ons. Still get Crash Reporter.
Firefox DOES open in Safe Mode.
Ran MalwareBytes, AVG and SuperAntiSpyware. No viruses.
Restored Firefox to its Default State.
Checked for missing files In windows using Windows System File Checker in Command Prompt. There are none.
I am running Windows 7 Ultimate on a Dell XPS 400.
Everything else on my system works fine except for Firefox.
KEEP GETTING CRASH REPORTER!
Frustrated now.

Thanks. I'll take any kind of practical help I can get at this point.
I filed a crash report RIGHT BEFORE I did this so this first one is DEFINITELY ME.
[[https://crash-stats.mozilla.com/report/index/bp-bae3319d-801e-4ca5-902a-2cc2d2130404]]
ID: bae3319d-801e-4ca5-902a-2cc2d2130404
[[https://crash-stats.mozilla.com/report/index/bp-d927527a-622e-47f4-8fba-89aa22130404]]
ID: d927527a-622e-47f4-8fba-89aa22130404
[[https://crash-stats.mozilla.com/report/index/7c47c3e6-e5e5-4eb1-af17-09ab32130331]]
ID: 7c47c3e6-e5e5-4eb1-af17-09ab32130331
[[https://crash-stats.mozilla.com/report/index/bp-a7fe1588-1fcb-4da8-88b0-e963e2130330]]
ID: a7fe1588-1fcb-4da8-88b0-e963e2130330
[[https://crash-stats.mozilla.com/report/index/bp-b73ffa4b-2bec-4d42-ae7d-f39492130330]]
ID: b73ffa4b-2bec-4d42-ae7d-f39492130330

Delete all files in a directory not working for some files

Similar Messages

Maybe you are looking for