Delete and close gap doesn't

When I delete a clip the gap does not close. I held the shift ctrl key down one time and now the ripple effect seems to be off.
Michael

It's audio clips. My audio is separate from the video so that solves that problem. I managed to do a reasonable facsimilie of the Mary Tyler Moore credits for our parody video.It's not perfect, but it does the job.   Michael
Date: Sat, 29 Oct 2011 17:25:45 -0600
From: [email protected]
To: [email protected]
Subject: delete and close gap doesn't
    Re: delete and close gap doesn't
    created by Bill Hunt in Premiere Elements - View the full discussion
Michael, The most common reason that gaps do not close, is that there is either an Audio Clip that "covers" the gap, or perhaps Video that does. Is either the case in your instance? Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3997474#3997474
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3997474#3997474. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Delete and close gap problem

I have 2 project s on 1 [delete and close gap] no work why? on premiere element 12

djvalente
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
For your immediate issue...
Whether or not the command Delete and Close Gap works is typically dependent on the content above and below the
spot where you want to delete and close gap. Manual closing of the gap (with care) with the mouse cursor may be your way.
Please review the following details on how the Delete and Close Gap command can fail.
ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
If you have any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Adobe Premiere Elements 10 - Is there an alternative to 'delete and close gap?'

There are two scenes on the same track (not sure if they're called scenes, just not sure what else to call them), I want to put them right next to each other on the timeline, with no gap in between. If I use delete and close gap, everything in front of these two scenes will move as well. I don't want everything else to move, I only want to move the lone scene next to another scene. If I just try to drag it next to it, it'll either slice the scene in half if I don't drag it 100% perfectly next to it, or there will be a single frame of black space on the video. The only way I can successfully do this is if I zoom in and pain stakingly drag them precisely next to each other. Is there some way I can use something like 'delete and close gap' without making all the other tracks move as well? I think it might've been like ripple delete back in the older versions of Premiere if I remember correctly.

Xebarsus
Whenever you are adding clips to the Timeline, try holding down the Alt key of the computer main keyboard to avoid disturbing the existing Timeline content including splitting of audio.
Have you tried right clicking the Timeline file for deletion and selecting "Delete" instead of "Delete and Close Gap" and then use the Alt modifier as you drag the clip(s) around with the mouse cursor?
Please give all that a look and let us know the outcome? But that Alt Key maneuver should work for you as it has for many others.
Thanks.
ATR

"Delete and close gap" stopped working

Another first: In one project, but not in others, "Delete and close gap" will only work if I delete complete clips. If I try to trim a clip, either in the Timeline, or in the Sceneline by trimming in-points or out-points in the mini-timeline under the Monitor screen, a gap created by trimming a scene does not close up.
Stranger still -- Trying another approach to trimming a particular clip, I split it, then tried to delete one of the two new clips using "Delete and close gap. It deleted the new clip but did not close the gap. The action created a black clip image in the Sceneline where the deleted clip had bin, and this new black clip image could not be deleted.
In the Timeline, it is possible to drag the following scenes over to close the newly-created gap, but it's time-consuming. It's a drag, so to speak.
I'm almost done editing the project in question and can complete it without solving this problem, but if I suffered a similar loss of the ability to trim clips in a longer project without creating gaps in the clip sequence, or if "Delete and close gap" failed to work on split clips, I would very much want to know why, and how to restore the lost ability.
Has anyone experienced anything similar?
John B

Thanks, Robert -- You nailed it on your first guess. In this project, for the first time ever, I dragged an audio track to the Narration track. I know it's intended for narration that's recorded directly into PE, but I thought I'd see if I could use it as an extra track.
Also in this project, I've split the audio on the Soundtrack so it's non-continuous, with gaps in it, because I only need it in certain places. From your 2nd message, it's possible this could also be a/the cause of the problem.
I'll keep a close eye on my use of these tracks. In other projects, I have imported audio into the Soundtrack track without causing this problem, but those were continuous music tracks with no gaps.
Another lesson learned.
Thanks!
John B

Premiere Elements 11 - Delete and Close Gap has stopped working?

Editing my music video. At 2:35:22 I can Delete and Close Gap OK but at the previous clip at 2:34:15 clicking on Delete and Close Gap will delete the video but won't close the gap! Any suggestions? It's Adobe Premiere Elements 11 and running Windows 8. Everything has been OK until now.

John
Thanks for the follow up. Glad that you completed your project successfully.
The Delete and Close Gap issue relates to what is above or below the place where you want to delete and
close gap. And, also as presented in the blog that I cited previously.
When you are forced to do the manual delete and close gap, the dangers reside in disturbing the existing
Timeline in doing so. For that we need to discuss the use of what are called keyboard modifiers as part of the move.
The following link may help in that regard. I present it for informational and not promotional purposes
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
Best wishes as you move forward with your Premiere Elements projects.
ATR

"Delete and Close Gap" on Premier 13 will "delete" a photo but will not "close the gap". How do I correct this?

The area just goes dark in the finished product for the time that was there before and the gap remains.

joseh54506628
What computer operating system is your Premiere Elements 13 running on?
Many of these Delete and Close Gap failures can be traced to content that is directly above or below the area of interest.
Depending on the circumstances, you may be forced to select the clip or clips in a group and do a manual close gap
with the mouse.cursor.
Please review the following as one instance of Delete and Close Gap Failure.
http://atr935.blogspot.com/2014/02/pe-delete-and-close-gap-failures.html
If possible could you represent you Delete and Close Gap situation with a screenshot?
We will be watching for your progress.
ATR

Delete clip and close gap

In Premiere Elements 11: -when I will delete a picture from the timeline in single picture show, the “delete and close gap” from edit menu or delete tab -only delete the picture, BUT DOES NOT CLOSE THE GAP!!!!
What’s wrong?

P.Konrad
The first screenshot that you posted showed the "orange" over the transitions suggesting that you had not rendered the Timeline transitions to get the best possible preview after you applied the transitions. In that state, I had no problems with Delete and Delete and Close Gap in my tests here.
In the second screenshot that you posted showed the complete Timeline content rendered...no "orange", just "green" which implies that you are now seeing the best possible preview. Again, in this state, I had no problems with Delete and Close Gap in my tests here.
From what you just wrote, it sounds like you had problems with Delete and Delete and Close Gap in the first case (with transitions unrendered), but did not when the whole Timeline content was rendered. Is that correct? If so, I cannot confirm that difference.
The first and second screenshots do not appear to show the same clips and are probably located at a different portion of the Timeline. In that case, I am still guessing that you have content above that portion of the Timeline where you are having the problem.
Right now it sounds like you have everything working. That is important. But, I would ask you to look into what I have just written to detemine if any of it applies to your specific situation.
Many thanks for the follow ups.
I have misintepreted any of your details and results, please do not hesitate to let me know.
Thank you.
ATR

Cut-and-close-gap video distortion? Prem elem 9

Hi, I have Adobe Photoshop Premiere Elements 9.
I am creating some tutorial videos on math and other topics. I want the tutorials to be succinct, which requires me to edit out a lot of blank space.
Things look fine when I first load the file, but after cutting the video and audio up and delete-and-close-gap'ing a lot of it, the video at the end is very visually distorted. I can't even tell what's going on and it looks horrible.
Any suggestions or tips/forwards to threads that answer this question?
sorry if this is a repost, i'm very pressed for time

You might want to take a look at this article on editing Camtasia footage: http://forums.adobe.com/thread/453044?tstart=0
There are some useful comments by Jeff Bellune, who uses Camtasia for his tutorials. Now, many of his comments were done with Premiere Pro CS3 & CS4 in mind, but much will translate to PrE, as well - just not all of it.
Good luck,
Hunt

Delete and close PR

Hi,
We have to dalete and close a huge number of purchase requisition.
There is an standar tcode to make massive changes?
Thanks in advance for the help.
Regards
Enzo

Hello Enzo,
We have to delete and close a huge number of purchase requisition.
There is an standar tcode to make massive changes?
Thanks in advance for the help.
Basically there are two option of deleting the created PR from the system:
First effective option would be to use LSMW and record ME52 T-code.
Second one would be by trying MEMASSRQ + field EBAN-LOEKZ.
Please update your post and if your query is answered then kindly don't forget to close this thread.
Regards,
Sarthak

File.delete() and File.deleteOnExit() doesn't work consistently..

I am seeing some odd behavior with trying to delete files that were opened. Usually just doing new File("file.txt").delete() would work. However, in this case, I have created an input stream to the file, read it in, saved it to another location (copied it), and now I am trying to delete it.
The odd thing is, in my simple application, the user can work with one file at a time, but I move "processed" files to a lower pane in a swing app. When they exit it, it then archives all the files in that lower pane. Usually every file but the last one opened deletes. However, I have seen odd behavior where by some files don't delete, sometimes all of them wont delete. I tried the deleteOnExit() call which to me should be done by the JVM after it has released all objects such that they don't matter and the JVM ignores any object refs and directly makes a call (through JNI perhaps) to the underlying OS to delete the file. This doesn't work either.
I am at a loss as to why sometimes some files delete, and other times they don't. In my processing code, I always close the input stream and set its variable to null. So I am not sure how it is possible a reference could still be held to the object representing the file on disk.

and then, in the other class
public int cdplayerINIToMMCD(File aDatabase, String thePassword) throws IllegalArgumentException {
     /*---------DATA---------*/
     String dbLogin, dbPassword;
     JFileChooser fc;
     INIFileFilter ff;
     int dialogReturnVal;
     String nameChosen;
     File INIFile;
     ProgressMonitor progressMonitor;
     BufferedReader inFileStream;
     String oneLine;
     int totalLines = 0;
     int linesParsed = 0;
     boolean openDBResult;
     int hasPassword;
     if ((aDatabase == null) || (!aDatabase.exists()) ||
        (FileManagement.verifyMMCD(aDatabase) == FileManagement.VERIFY_FAILED)) {
        throw new IllegalArgumentException();
     else {
        currentDB = aDatabase;
        if(thePassword == null) {
          dbPassword = "";
        else { dbPassword = thePassword; }
        dbLogin = dbPassword; //For MSAccess dbLogin == dbPassword
     //Ask the user for the cdplayer.ini file.
     //Create a file chooser
     if (System.getProperty("os.name").indexOf("Windows") > -1) {
        fc = new JFileChooser("C:\\Windows");
     else {
        fc = new JFileChooser();
     fc.setMultiSelectionEnabled(false);
     fc.setDragEnabled(false);
     //Create a new FileFilter
     ff = new INIFileFilter();
     //Add this filter to our File chooser.
     fc.addChoosableFileFilter(ff);
     fc.setFileFilter(ff);
     //Ask the user to locate it.
     do {
        dialogReturnVal = fc.showOpenDialog(mainFrame);
        if (dialogReturnVal == JFileChooser.APPROVE_OPTION) {
           nameChosen = fc.getSelectedFile().getAbsolutePath();
           if(nameChosen.toLowerCase().endsWith(INIFileFilter.FILE_TYPE)) { INIFile=new File(nameChosen); }
           else { INIFile = new File(nameChosen+INIFileFilter.FILE_TYPE); }
           if (!INIFile.exists()) {
              continue; //If the name specified does not exist, ask again.
           else { break; }
        else { //User clicked cancel in the open dialog.
           //Ignore what we've done so far.
           return(IMPORT_ABORTED);
     } while(true); //Keep asking until cancelled or a valid file is specified.
     //Determine how many lines will be parsed.
     try {
       //Open the INI for counting
       inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
       while ((inFileStream.readLine()) != null) {
           totalLines++;
       //Close the INI file.
       inFileStream.close();
     } catch (IOException ex) { return(IMPORT_FAILED); }
     //Make a progress monitor that will show progress while importing.
     progressMonitor = new ProgressMonitor(mainFrame, "Importing file","", 0, totalLines);
     progressMonitor.setProgress(0);
     progressMonitor.setMillisToPopup(100);
     progressMonitor.setMillisToDecideToPopup(1);
     //Make our DatabaseHandler to insert results to the database.
     dbh = new DatabaseHandler();
     //Open the database connection.
     do {
       try {
          openDBResult = dbh.openDBConnection(currentDB, dbLogin, dbPassword);
       } catch(JDBCException ex) { return(IMPORT_JDBC_ERROR); } //OUCH! can't write anything.
         catch(SQLException ex) {
             openDBResult = DatabaseHandler.OPNCN_FAILED;
             //Can not open the database. Is it password protected?
             hasPassword = JOptionPane.showConfirmDialog(mainFrame, "Could not open the database. "+
                                            "The password is wrong or you have not specified it.\n"+
                       "Do you want to enter one now?", "New password?", JOptionPane.YES_NO_OPTION);
          if (hasPassword == MMCDCatalog.DLG_OPTN_YES) {
             dbPassword = JOptionPane.showInputDialog(mainFrame, "Please enter your "+
                                                        "password for the DataBase:");
                dbLogin = dbPassword; //For MSAccess, login == password
          //If the password wasn't the problem, then we can't help it.
          else { return(IMPORT_FAILED); }
     } while(openDBResult != DatabaseHandler.OPNCN_OK); //If it is OK, no exception thrown.
     //Import the ini file
     try {
        //Open the INI file for parsing.
        inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
        //Read and parse the INI file. Save entries once parsed.
        while ((oneLine = inFileStream.readLine()) != null) {
           parseLine(oneLine);
           linesParsed++;
           progressMonitor.setNote("Entries imported so far: "+entriesImported);
           progressMonitor.setProgress(linesParsed);
           if ((progressMonitor.isCanceled()) || (linesParsed == progressMonitor.getMaximum())) {
              progressMonitor.close();
              break;
        //Close the INI file.
        inFileStream.close();
     } catch (IOException ex) {
          //Make absolutely sure the progressMonitor has disappeared
            progressMonitor.close();
            if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
             JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.\n"+
                "Error while attempting to close the database", "Error", JOptionPane.INFORMATION_MESSAGE);
          else {
             JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.",
                                                "Error", JOptionPane.INFORMATION_MESSAGE);
            return(IMPORT_FAILED);
     //Make absolutely sure the progressMonitor has disappeared
     progressMonitor.close();
     //Close the database connection
     if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
        JOptionPane.showMessageDialog(mainFrame, "Error while closing the database after import.",
                                      "Error", JOptionPane.INFORMATION_MESSAGE);
     //Did the user cancel?
     if (totalLines != linesParsed) {
        return(IMPORT_ABORTED);
     //Success!
     //Everything ok. Return the number of entries imported.
     return(entriesImported);
}

Easy cut and erase and close gap tool

Hi
In Quantel, which I am more familiar with, the '[' and ']' keys perform an edit where they cut the clip at that point where the play head is (like the razor blade tool), but also erase the unwanted portion of the clip and close the gap, '[' to the left of the play head and ']' to the right of it. I don't know what the tool is called but it's super useful. Does final cut have this tool??
Thanks
LM

The only thing that might be of any use could be the Add Edit (ctrl-v).
These links will show you most of the keyboard shortcuts:-
http://www.flippant.net/blogimages/finalcut5shortcuts.pdf
http://www.peabody.jhu.edu/data/46/link/712/0331175FCPKYBDSHTCTQRC.pdf

Does not delete & close gap in Premiere elements 10

Hi I have made a video in Premiere elements 10 and now I want to remove or trim some clips in the middle of the video but it leaves a gap. If I select the gap and right click "Delete and close gap" nothing happens. How can I trim it without leaving a gap?
Thanks!

With the Audio Clip, how would you like PrE to handle that?
Would you like for the program to Cut the Audio too, and Delete that portion, or do you wish for the Audio Clip to not be affected?
If the latter, then I would Delete the Audio Clip from the Timeline, edit the Video, then drag that Audio Clip back to the Timeline.
As I do not do "music videos," I only do edits to the Audio portion of my Timeline, until after the Video has been edited.
Now, if you wish to keep the Audio Clip, as it is, then try this. You can Delete but NOT close gap, as that will not work. Just Delete that part of the Video. Then, Select (drag the cursor around the remaining Video Clips, past the gap, and with Snap ON, just move all of the Video Clips to the left. Do NOT "bang" the Video Clips against the preceding Video Clips, or "shearing" can happen, and you do not want that.
Good luck,
Hunt

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!

This isn't the actual clip, I fixed it by highlighting and moving everything over but it'd still be a good thing to know for the future. This is essentially the situation i'm talking about. I would never use it for something this simple, but when more complicated editing is being done it isn't so easy to just move all the clips over.

When i open iTunes U it comes up with just the brown bookshelf but no icons to click on and then it closes. I've deleted it and then re-download it and it still doesn't work.

On the bookshelf there's no icons to click on and after a mintue it closes. I've deleted it and then re-download it and it still doesn't work. Im using a ipod touch 4 and im on 5.1.

I, too, am having this problem and it's annoying. The app just shuts down every time I use it. Too bad cuz it looks lie there are so many wonderful courses in the catalog.
Any tips on how to fix this would be appreciated!
Thanks.

Delete and close gap doesn't

Similar Messages

Maybe you are looking for