Delete and close gap problem
I have 2 project s on 1 [delete and close gap] no work why? on premiere element 12
djvalente
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
For your immediate issue...
Whether or not the command Delete and Close Gap works is typically dependent on the content above and below the
spot where you want to delete and close gap. Manual closing of the gap (with care) with the mouse cursor may be your way.
Please review the following details on how the Delete and Close Gap command can fail.
ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
If you have any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR
Similar Messages
-
"Delete and close gap" stopped working
Another first: In one project, but not in others, "Delete and close gap" will only work if I delete complete clips. If I try to trim a clip, either in the Timeline, or in the Sceneline by trimming in-points or out-points in the mini-timeline under the Monitor screen, a gap created by trimming a scene does not close up.
Stranger still -- Trying another approach to trimming a particular clip, I split it, then tried to delete one of the two new clips using "Delete and close gap. It deleted the new clip but did not close the gap. The action created a black clip image in the Sceneline where the deleted clip had bin, and this new black clip image could not be deleted.
In the Timeline, it is possible to drag the following scenes over to close the newly-created gap, but it's time-consuming. It's a drag, so to speak.
I'm almost done editing the project in question and can complete it without solving this problem, but if I suffered a similar loss of the ability to trim clips in a longer project without creating gaps in the clip sequence, or if "Delete and close gap" failed to work on split clips, I would very much want to know why, and how to restore the lost ability.
Has anyone experienced anything similar?
John BThanks, Robert -- You nailed it on your first guess. In this project, for the first time ever, I dragged an audio track to the Narration track. I know it's intended for narration that's recorded directly into PE, but I thought I'd see if I could use it as an extra track.
Also in this project, I've split the audio on the Soundtrack so it's non-continuous, with gaps in it, because I only need it in certain places. From your 2nd message, it's possible this could also be a/the cause of the problem.
I'll keep a close eye on my use of these tracks. In other projects, I have imported audio into the Soundtrack track without causing this problem, but those were continuous music tracks with no gaps.
Another lesson learned.
Thanks!
John B -
When I delete a clip the gap does not close. I held the shift ctrl key down one time and now the ripple effect seems to be off.
MichaelIt's audio clips. My audio is separate from the video so that solves that problem. I managed to do a reasonable facsimilie of the Mary Tyler Moore credits for our parody video.It's not perfect, but it does the job. Michael
Date: Sat, 29 Oct 2011 17:25:45 -0600
From: [email protected]
To: [email protected]
Subject: delete and close gap doesn't
Re: delete and close gap doesn't
created by Bill Hunt in Premiere Elements - View the full discussion
Michael, The most common reason that gaps do not close, is that there is either an Audio Clip that "covers" the gap, or perhaps Video that does. Is either the case in your instance? Good luck, Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3997474#3997474
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3997474#3997474. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Adobe Premiere Elements 10 - Is there an alternative to 'delete and close gap?'
There are two scenes on the same track (not sure if they're called scenes, just not sure what else to call them), I want to put them right next to each other on the timeline, with no gap in between. If I use delete and close gap, everything in front of these two scenes will move as well. I don't want everything else to move, I only want to move the lone scene next to another scene. If I just try to drag it next to it, it'll either slice the scene in half if I don't drag it 100% perfectly next to it, or there will be a single frame of black space on the video. The only way I can successfully do this is if I zoom in and pain stakingly drag them precisely next to each other. Is there some way I can use something like 'delete and close gap' without making all the other tracks move as well? I think it might've been like ripple delete back in the older versions of Premiere if I remember correctly.
Xebarsus
Whenever you are adding clips to the Timeline, try holding down the Alt key of the computer main keyboard to avoid disturbing the existing Timeline content including splitting of audio.
Have you tried right clicking the Timeline file for deletion and selecting "Delete" instead of "Delete and Close Gap" and then use the Alt modifier as you drag the clip(s) around with the mouse cursor?
Please give all that a look and let us know the outcome? But that Alt Key maneuver should work for you as it has for many others.
Thanks.
ATR -
Premiere Elements 11 - Delete and Close Gap has stopped working?
Editing my music video. At 2:35:22 I can Delete and Close Gap OK but at the previous clip at 2:34:15 clicking on Delete and Close Gap will delete the video but won't close the gap! Any suggestions? It's Adobe Premiere Elements 11 and running Windows 8. Everything has been OK until now.
John
Thanks for the follow up. Glad that you completed your project successfully.
The Delete and Close Gap issue relates to what is above or below the place where you want to delete and
close gap. And, also as presented in the blog that I cited previously.
When you are forced to do the manual delete and close gap, the dangers reside in disturbing the existing
Timeline in doing so. For that we need to discuss the use of what are called keyboard modifiers as part of the move.
The following link may help in that regard. I present it for informational and not promotional purposes
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
Best wishes as you move forward with your Premiere Elements projects.
ATR -
The area just goes dark in the finished product for the time that was there before and the gap remains.
joseh54506628
What computer operating system is your Premiere Elements 13 running on?
Many of these Delete and Close Gap failures can be traced to content that is directly above or below the area of interest.
Depending on the circumstances, you may be forced to select the clip or clips in a group and do a manual close gap
with the mouse.cursor.
Please review the following as one instance of Delete and Close Gap Failure.
http://atr935.blogspot.com/2014/02/pe-delete-and-close-gap-failures.html
If possible could you represent you Delete and Close Gap situation with a screenshot?
We will be watching for your progress.
ATR -
In Premiere Elements 11: -when I will delete a picture from the timeline in single picture show, the “delete and close gap” from edit menu or delete tab -only delete the picture, BUT DOES NOT CLOSE THE GAP!!!!
What’s wrong?P.Konrad
The first screenshot that you posted showed the "orange" over the transitions suggesting that you had not rendered the Timeline transitions to get the best possible preview after you applied the transitions. In that state, I had no problems with Delete and Delete and Close Gap in my tests here.
In the second screenshot that you posted showed the complete Timeline content rendered...no "orange", just "green" which implies that you are now seeing the best possible preview. Again, in this state, I had no problems with Delete and Close Gap in my tests here.
From what you just wrote, it sounds like you had problems with Delete and Delete and Close Gap in the first case (with transitions unrendered), but did not when the whole Timeline content was rendered. Is that correct? If so, I cannot confirm that difference.
The first and second screenshots do not appear to show the same clips and are probably located at a different portion of the Timeline. In that case, I am still guessing that you have content above that portion of the Timeline where you are having the problem.
Right now it sounds like you have everything working. That is important. But, I would ask you to look into what I have just written to detemine if any of it applies to your specific situation.
Many thanks for the follow ups.
I have misintepreted any of your details and results, please do not hesitate to let me know.
Thank you.
ATR -
Cut-and-close-gap video distortion? Prem elem 9
Hi, I have Adobe Photoshop Premiere Elements 9.
I am creating some tutorial videos on math and other topics. I want the tutorials to be succinct, which requires me to edit out a lot of blank space.
Things look fine when I first load the file, but after cutting the video and audio up and delete-and-close-gap'ing a lot of it, the video at the end is very visually distorted. I can't even tell what's going on and it looks horrible.
Any suggestions or tips/forwards to threads that answer this question?
sorry if this is a repost, i'm very pressed for timeYou might want to take a look at this article on editing Camtasia footage: http://forums.adobe.com/thread/453044?tstart=0
There are some useful comments by Jeff Bellune, who uses Camtasia for his tutorials. Now, many of his comments were done with Premiere Pro CS3 & CS4 in mind, but much will translate to PrE, as well - just not all of it.
Good luck,
Hunt -
Dear Team,
Please solve this problem.
Open the outlook then show below error.
1. Check online for a solution and close the problem
2. Close the program
Please do the needful as well as possible.
Thanks & Regards.
Devesh Yadav
9999815203Hello,
So Outlook has failed to launch and an error dialog (error reporting) pops up. A lot of things can cause this issues.
One of the main causes is a corrupt Navigation Pane settings file. You might need to start Outlook using the /resetnavpane
switch. Just run command (Windows key + R), type or paste:
outlook.exe /resetnavpane (Please note that you will lose any customizations on the navigation pane)
In certain cases, a corrupted data file will also cause this problem. So, if the /resetnavpane switch doesn't really work, please try to repair your data file with
scanpst.exe tool:
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
If these cannot fix your issue, please be more specific on the error. Please click the button at the bottom of the error pop ups and copy the
Problem signature here.
Thanks,
Ethan Hua CHN
TechNet Community Support -
Hi,
We have to dalete and close a huge number of purchase requisition.
There is an standar tcode to make massive changes?
Thanks in advance for the help.
Regards
EnzoHello Enzo,
We have to delete and close a huge number of purchase requisition.
There is an standar tcode to make massive changes?
Thanks in advance for the help.
Basically there are two option of deleting the created PR from the system:
First effective option would be to use LSMW and record ME52 T-code.
Second one would be by trying MEMASSRQ + field EBAN-LOEKZ.
Please update your post and if your query is answered then kindly don't forget to close this thread.
Regards,
Sarthak -
Easy cut and erase and close gap tool
Hi
In Quantel, which I am more familiar with, the '[' and ']' keys perform an edit where they cut the clip at that point where the play head is (like the razor blade tool), but also erase the unwanted portion of the clip and close the gap, '[' to the left of the play head and ']' to the right of it. I don't know what the tool is called but it's super useful. Does final cut have this tool??
Thanks
LMThe only thing that might be of any use could be the Add Edit (ctrl-v).
These links will show you most of the keyboard shortcuts:-
http://www.flippant.net/blogimages/finalcut5shortcuts.pdf
http://www.peabody.jhu.edu/data/46/link/712/0331175FCPKYBDSHTCTQRC.pdf -
Open and Close Dataset problem
Hi All,
I am facing a weird problem in transferring data to application server.
I have used Open dataset to write my file in text format to the application server.
Now everything works fine when small amount of data is there.When the number of records increases and when it takes lot of time , the format of the text file is completely distorted.
I have used tab as the delimiter. Please suggest me some solution for this.
Is this due to the time taken?
Regards.Hi
in the above program , when i had created 1st i had same problem
then i had worte the logic likethis
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
<b>loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.</b>
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop.
with the bold letters above
i had wrote that logic for that
reward if usefull -
Does not delete & close gap in Premiere elements 10
Hi I have made a video in Premiere elements 10 and now I want to remove or trim some clips in the middle of the video but it leaves a gap. If I select the gap and right click "Delete and close gap" nothing happens. How can I trim it without leaving a gap?
Thanks!With the Audio Clip, how would you like PrE to handle that?
Would you like for the program to Cut the Audio too, and Delete that portion, or do you wish for the Audio Clip to not be affected?
If the latter, then I would Delete the Audio Clip from the Timeline, edit the Video, then drag that Audio Clip back to the Timeline.
As I do not do "music videos," I only do edits to the Audio portion of my Timeline, until after the Video has been edited.
Now, if you wish to keep the Audio Clip, as it is, then try this. You can Delete but NOT close gap, as that will not work. Just Delete that part of the Video. Then, Select (drag the cursor around the remaining Video Clips, past the gap, and with Snap ON, just move all of the Video Clips to the left. Do NOT "bang" the Video Clips against the preceding Video Clips, or "shearing" can happen, and you do not want that.
Good luck,
Hunt -
In fcp7 there is a "close gap" option so you don't have to highlight and move everything every time you delete a small section in the middle of a video. Is it possible to do this in fcpx? I can't seem to find it...Thanks!
This isn't the actual clip, I fixed it by highlighting and moving everything over but it'd still be a good thing to know for the future. This is essentially the situation i'm talking about. I would never use it for something this simple, but when more complicated editing is being done it isn't so easy to just move all the clips over.
-
Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple RoutersTwo ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john
Maybe you are looking for
-
External iSight no longer recognized, built-in iSight works - how to fix?
I have a new MacBook Pro with Leopard and both the built-in iSight and my external iSight were recognized and I could switch between them. This past week or so my external iSight became no longer recognized even after unplugging and re-plugging in. W
-
Threads + Swing = Confusion
Hi all, I am having a problem with threads and Swing apps. I have read the tutorial 3 times and get more confused each time i try to understand how to update the gui with the other thread. At this point I'm just trying to do something simple (eventua
-
Does SAP GRC 5.3 Ramp up have complete integration with NW IDM 7.0? Note: We have enaged with SAP for GRC 5.3 Ramp up program and also we have the plans of integrating NW IDM 7.0 & GRC 5.3.
-
[svn:fx-trunk] 15314: Merging revision 15312 from 4.x to trunk
Revision: 15314 Revision: 15314 Author: [email protected] Date: 2010-04-09 14:02:53 -0700 (Fri, 09 Apr 2010) Log Message: Merging revision 15312 from 4.x to trunk ComboBox bug fix http://bugs.adobe.com/jira/browse/SDK-26089 - s:ComboBox is not
-
Thread-safe increment()
class Counter { int count = 0; int increment() { int n=count; count = n + 1; return n; Can you make it thread-safe?