Delete and create system in marketplace

Hello,
I changed the hardware to one system. I asked for a knew license and I installed it.But when I tried to open the connection to SAp the hardware key was the old one. So, I deleted the system from marketplace but now I don´t know how to create it again.
can you help me?

Hi
You can add up multiple hardware keys against same system (SID). Just search for the SID, then goto change and on the hardware key page just enter correct hardware key and save it. This way you can register the correct hardware key.
This is the same method we would use in a HA envronment where two nodes of the same system ned different license.
Cheers!!
Javed

Similar Messages

  • Document Deleted and Created again with diff doc. number

    Dear All,
    We are having the scenario that we have some parked documents during the fiscal year (2009) and before the yearend closing, we intend to change the new posting date (01.01.2010) for those parked documents which were created through Logistics Invoice Verification.
    When we give new posting date (01.01.2010) and make save as parked/completed, the system issues a message,"Document 5105601528 2009 was deleted and created again under 5105601532 2010".
    We need to keep the same document number 5105601528 for the next fiscal year also and do not want to generate new document for 2010.
    I request you to all please provide your valuable suggestion that how we stop the new document number for the same document during next fiscal year.
    Regards,
    Ranesh.

    Hi
    As you mentioned that you have changed the Posting Date in the Parked Document from old fiscal year to new fiscal year date 01.01.2010 , then the system will generate the Number based on the sequence available.
    It is not possible to retain the same Document Number in the next fiscal year 2010.
    Hence if you want the system to generate to the same old number, then in the new fiscal year, you shouldnt have any parked/posted document with that number.
    As per my guess, in the new fiscal year already a Document was parked/posted with the numbers 5105601528, 5105601529,5105601530 and 5105601531.And the next number in sequence is 5105601532, iey when changed the posting date of the parked document system generated ihe next available number.
    Hope you understand.
    Regards
    Venkat

  • ABAP Routine for Deleting and creating index for ODS in Process chains

    Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

    Hi Sachin,
    find the following ABAP code to delete ODS ondex.
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    To create index:
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    hope it helps....
    regards,
    Raju

  • ¿Will make a delete and create a new temp.dbf increase perfomance?

    I have a 32GB temp file. I don't understand so much what really mean that temp.dbf must be so big.
    The question is: Can I delete and create a new temp.dbf? and what means do this?.
    I'm newbie in this.
    Thanks a lot, Luis.
    Edited by: cabezanet on 23-nov-2009 9:10

    Temporary tablespace (physically tempfile) is sused for sorting operations, like result set ordering, joins and etc. Hopefully, your tempfile was in autoextend mode and its' size increased as soon as there was request for sorting operations which did not fill into memory.
    You can drop and recreate the temp tablespace as it is not related any database consistency structure. They are only sort segments.

  • Source system was deleted and created again

    Hello
    The source system was deleted and all transfer rules to this source syttem dissapaared.
    Later it was decided that we need the siurce system and it was created from new under the same name.
    Is it possible to restore lost transfer rules?

    I don't know of a way of restoring them intact, but if you had ABAP code in the transfer rules, you can search table <b>RSAABAP</b> which might contain your ABAP code.  SAP doesn't seem to delete from the table even when you delete a DataSource assignment.
    There are a lot of rows in the table. the challenge will become finding which ones are yours.  Hopefully your code was commented.

  • How to delete and create the CCM MASTER CATALOG in Catalog Content?

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
    http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
    Any help provided will be really appreciated.

    Hi,
    Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
    If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
    Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
    Regards,
    Jason

  • I am running OS X 10.9.1 on a MacBook Air....I had keychain issues that I bumbled my way through - deleted and created a new Keychain....now a box appears pretty regularly, wanting my Keychain login....i enter it and it's accepted and the box disappears.

    Help..!!  I'm running OS X 10.9.1 on a MacBook Air.  I had keychain issues with passwords etc and bumbled my way out of it by deleting the current keychain and creating a new one with a new log-in (yes, I wrote it down this time!)  But now these little boxes appear wanting my log-in ie. calendar, Safari, Outlook) and its annoying....entering the login gets rid of the box but what a pain and I know it's not right.....I know I need to enter somekind of automatic logins to these apps but how do I do that....and go easy on me, I'm not computer savvy.

    Did you install the latest driver set for the device?  there is a new release on motu.com for mavericks.
    rachel

  • How do I delete and create a new iCloud account on my iPhone, when I cannot delete the old account off my phone!

    I have given my 4s to my wife, she has an iCloud account which uses her work address, she has now left the company and we want to start a new iCloud account, trouble is we cannot delete the old account, we have created a new iCloud account but the iPhone won't let us log into it as it only recognises the old version, we can't access her email anymore to reset the account. Have tried all online help. We restored the phone through iTunes

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

  • Client Delete and Logical System and CUA

    I'm getting ready to do some client clean up in prep for an upgrade from ECC 5 to ECC 6 soon.
    Currently we have a 3 system landscape: DV1 QA1 PR1
    Clients on these systems are as follows: (not including 000, 001, 066)
    PR1:100 - the production client
    QA1:100 - Integration Master - not used except for RFC connections for Solution Manager
    QA1:110 - Cycle 1 testing - not used
    QA1:120 - Cycle 2 testing - not used
    QA1:200 - Old training master client - not used
    QA1:201 - Old training client - not used
    QA1:710 - no longer being used for testing
    QA1:720 - client used for system and integration testing
    DV1:100 - Configuration - not used
    DV1:110 - ABAP development
    DV1:120 - Configuration
    DV1:700 - Template for test - not used
    DV1:710 - Test with prod data
    Most have a logical system defined for the client.
    I am going to delete those I've underlined above as they are no longer used.
    Some of these are setup in the CUA system.
    All are showing up in Solution Manager SMSY system landscape.
    My plan is to backup the system database first! 
    Then:
    1) Delete the client(s) (SCC5) one by one
    2) Remove the client from CUA (SCUA)
    3) Remove the logical name (SALE)
    What I am unsure about is the order of the process.  Should the CUA and ALE modifications come before actually deleting the client?
    Does this sound like a reasonable plan to clean up our client landscape?
    Thanks in advance for your suggestions and help.
    Laurie McGinley

    Dear Laurie,
    Order should be like below:
    1) Remove the client from CUA (SCUA)
    2) Delete the client(s) (SCC5) one by one
    3) Remove the logical name (SALE)
    More over you should delete these clients from Solution Manager also inorder not to have error message when you go to solution Manager for doing anything on that system.
    Please revert back for any queries.
    Regards
    Shailesh Mamidwar

  • Delete and create server

    I want to create and delete server using command line utilities? How I do this?

    this may be helpful to you.
    http://e-docs.bea.com/wls/docs81/admin_ref/cli_tasks.html#1331621

  • Completely messed up Raid-Array and Partition! How to delete and create new Raid-Array​?

    Hello,
    I am using Ideapad U310 and tried to clean install Windows 8 and use my SSD as CACHE and Hibernate-Partition.
    So, I was able to get to the Intel CTRL+I-RAID Config Menu and there I was able to create and delete my RAIDS.
    Unfortunately I did not setup the Partition Size correctly, thus I only have a 50 GB Partition combined with my SSD and my HDD. This is what it looks like in the Intel Storage Manager:
    As you can see both, my SSD and HDD appears, but only have small partitions on the right. And Windows 8 only recognizes this small partitions, as you can see here:
    And now I am NOT able to get to the Intel RAID CTRL+I-menu before Windows starts, where I could delete this array.
    My Partitions are "empty", so I dont care if anything is delete. I just want to use raid with FULL CAPACITY of my harddrives. But how can I delete the RAID Arrays and reconfigure them correctly?
    When I change in the BIOS from RAID to AHCI I am able to install Windows 8 again with the whol CAPACITY of my SSD and HDD. But then I will not be able to use the RAID via Intel Storage Manager...
    Hopefully someone could help me.
    Thank you in advance.

    Hi
    Please see this thread
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-​series/The-Guide-on-How-To-Reformat-Repartition-AN​...
    Hope this helps
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • Delete and create of jmsserver

    Hi,
    Does somebody know why this doesn't work?:
    cd('/')
    try:
    print "DESTROY THE BASTARD"
    cmo.destroyJMSServer(JMSSERVERNAME)
    except:
    cmo.createJMSServer(JMSSERVERNAME)
    cd('/JMSServers/'+JMSSERVERNAME)
    JMSERVERNAME is a JMSServer name.
    The jms server exists, but it seems that he never deletes it because he also wants to create it. And that fails of course because the JMS server already exists.

    Try to catch the exception and print the statcktrace. probably there is a legitimate problem deleting the jms server. Try,
    try:
    cmo.destroyJMSServer("jms")
    except Exception,e:
    e.printStackTrace()
    See the exception and take appropriate action.
    HTH,
    -satya
    BEA Blog:
    http://dev2dev.bea.com/blog/sghattu/
    Get Involved in CodeShare:
    https://wls-console-extensions.projects.dev2dev.bea.com/
    https://wlnav.projects.dev2dev.bea.com/
    https://eclipse-wlst.projects.dev2dev.bea.com/
    https://wlst.projects.dev2dev.bea.com/

  • Delete and create user

    hi,
    i deleted a user and if i wanna create a user with same name i doesn't work..
    why?
    Thx,
    skydriver

    If the original account's home folder is still present in /Users/, move it to the /Users/Shared/ folder and try creating the account again; in some circumstances, the existence of a former account's home folder in /Users/ will interfere with the creation of a new account with the same short name. One situation which will cause it is if you are rebuilding the NetInfo database and recreated your accounts in a different order from the one they were originally created in.
    (11539)

  • My MacBook Air recognizes the SSD but I get the option to delete and create GUID!

    Hi all, I installed yosemite and now wanted to move to mavericks and I remain hanging in the deletion. The issue is that now I get no option to erase the disc. It appears in disk utility and the terminal recognizes the drive but will not let me to partition it to install OSX. How I can formTear disk drive as GUID for the computer to recognize what, so you can install the OS? PS: I did not recognize the Time Machine disk, not just when you start viewing it in disk utility, Greetings!
    http://goo.gl/2nI3ff look!

    Open Boot Camp Assistant, read the directions, continue to page 2 and make these 2 selections.

  • Reconfigure sales BOM deletes line item and creates new line item

    We are having issue with Sales BOM. Once sales BOM is reconfigure, line item is automatically deleted and creates new line item. These changes are not captured by reporting tool. Is it standard SAP behavior? if its not standard behavior, how to fix this issue?

    Hi,
    If i am not wrong, i assume you are using site instead of plant.   If it is plant , then "yes", we can have a order with same material being line item 10 and 20 with different plants.  Reg delivery, if the plants are configured to a same shipping point then you will have one delievery.  if the plants are configured for a different shipping point , then delivery will be split up.
    Reward if it helps,
    Thanks & regards,
    CLN

Maybe you are looking for