Delete and reinit the cube

Hi Friends,
I have a cube, which is loaded from R/3 datasouce 2LIS_05_Q0NOTIF and 2LIS_05_Q0ITEM. There was an issue and some of data is missing. We are planning to delete the cube content and run init delta on the cube again. There are few clarifications required
1. I think i don't have to fill the setup tables for delta init
2. I think I need to delete the delta queue from RSA7
3. What else I need to do?
Thanks in advance
Balaraj

Hi Balaraj,
Before this decision is taken to refill setup, what data is missing.
Is this something loaded as part of full/init or as part of delta.
If you are sure about the missing data and have an options to give selection conditions for this in Setup filling and also in the infopackage, then it would be a good idea to perform slective deletion of those records from cube and then fill the setup with only those records and load this to the cube using a full update with selection conditions.
All this is possibel only when
1. we know what data is missing.
2. Is it possible to fill setup only for these records.
3. Can we perform selective loading to cube.
So if we have all the above options available then it would be a good idea to try with, rather than performing the huge activity of entire history reload.
regards,
Naveen.A

Similar Messages

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

I have 2 email addresses set up on my iphone 5, 1 can send mail and the other can't... have tried deleting and adding the account, no luck, have tried all suggestions... anyone help?

I have recently purchased the iphone 5S and have two AOL email accounts set up on it. They could both receive and send mail on the first day, but from the second day only 1 can send mail (both still receive). I get an message saying "Unable to send mail. A copy has been placed in your Outbox. Sending the message content to the server failed." This has been the response now for 3 days and suddenly this morning, I was able to send an email from this account, but only the one and now it's back to that same message. I have deleted and added the account again, using various methods. I even reset my phone and set it all up again from beginning with no luck. It is very frustrating and I am unsure why I can't send from both accounts, especially being that they are the same provider. I have read forums and it appears many have this same problem and I wondered if anyone has had it recently on this phone and how they fixed it. Someone said just use the AOL app to send from this account, yes that can be done, but it's inconvenient having to sign in all the time when i have a mail app that should work automatically. Any suggestions would be welcomed!!

I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1 Tx iPad 2, iOS 5.0.1, iBooks 2.1

App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1
Tx
iPad 2, iOS 5.0.1, iBooks 2.1

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

Erdygirl please be aware you are posting to a public forum. I have removed your personal information from your previous post.
Please check your account at http://www.adobe.com/ to locate your serial number. You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

In trying to edit a track - I want to "Delete and Move" the track to automatically fill the area that I deleted - However, after selecting a section to delete - the "Delete and Move" option is grayed out. How do I fix this?

Thank you for your attempt to help me. I appreciate that.
I think I figured out how to fix it-
I found that if I only delete a small amount at the beginning and at the end of the section that I want to remove - and then highlight that section - Then (and only then) does the "Delete and Move" function work to remove the unwanted section and automatically close the gap between the surrounding sections. I was trying to select a whole section and could only delete it - and then manually move it.
Problem solved.

No matter what I do FF 3.6 always loads 8 tabs when I open it. I do not want these loaded (they were the first 8 I had opened. I have even deleted and resinstalled the app, but get the same result. PLEASE help me. Thanks

every time I open ff 3.6 it loads the same 8 tabs I had opened the first time I used the program. I have deleted and reinstalled the app, but that has not helped. I have tried to remove history etc. But these same 8 tabs keep coming back. How can I get rid of them? Many thanks for your help.

You may have those 8 tabs saved as home pages. Firefox can store multiple home pages, for details of how to change them see [[How to set the home page]].

Three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashing

three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashin. i think its something wrong with my ipad but idk what

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the s

Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the software several times to no avail. I need some help.

Appreciate your help Ian and others. I have since uninstalled FCS and reinstalled FCXP only to get the same thing. Loading FCXP stalls at "Looking for Compressor Support". When I first downloaded FCXP from the App store I didn't notice that FCS was being placed in it's own folder. It's not something I did manually. Although moved into it's own folder with FCXP on the same drive. I was not able to open FCS apps. They would load and then "quit unexpectantly". They opened just fine before I downloaded FCXP. Do I need to purchase Compressor so that FCXP recognizes it? It seems this is where it stalls. It doesn't explain however why my computer "FREEZES" while doing this. I am in the process of re-installing Lion to see if this helps, otherwise I am at a complete loss.

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code? If not how do I figure out the code or how t? o remove it?

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code. If not how do I figure out the code or how to remove it?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

I recently received an email telling me to delete and redownload the current season of Dr Who. But after deleting the episodes I see no option to redownload them

I recently received an email telling me to delete and redownload the current season of Dr Who. But after deleting the episodes I see no option to redownload them.
Dear iTunes Customer,
Thank you for downloading the TV show Doctor Who, Season 7, Pt. 2. Unfortunately, the episode you received may have had issues with the audio. We have corrected the problem and a new copy is available to download, free of charge. To receive the new version, please re-download the title from iTunes.
Before downloading the new version, remove the current version:
1) Open iTunes on your computer.
2) Click on your TV show library.
3) Click the TV show to select it, and press the Delete key.
4) Click Delete TV show and then click Move to Trash.
To download the new version:
1) Sign into the iTunes Store.
2) Click Purchased on the right side in the iTunes Store under the QUICK LINKS section.
3) Click on TV Shows and select the TV Season you want to download.
4) Click the Cloud download icon next to the episode you wish to download.
You will now have an updated version of the TV show in your TV shows Library.
To delete and download the TV show from other devices, see http://support.apple.com/kb/HT2519.
Sincerely,
iTunes Store Team
I only see the otion to download the most recent episode.

That was it. Thight I had deleted them all.
Thanx

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

HT1937 i have old email address that is being used on my apple id and i do not know password I also have another apple id created but when I go to the istore it shows my pld account and i cannot delete and setup the right one

i have old email address that is being used on my apple id and i do not know password I also have another apple id created but when I go to the istore it shows my pld account and i cannot delete and setup the right one

No, "My Number" was not listed in my Phone menu, I had to manually type it it. Is there a way for that number to automatically be listed in that "My Number" spot? Would that maybe have something to do with my phone number not being listed as an option in the "Send and Receive" spot under messaging???

Delete and reinit the cube

Similar Messages

Maybe you are looking for