Delete and Restore Business Partner

Hi all,
I was able to delete business partner via BUPA_DEL, I want to ask some question:
How to restore deleted business partner?
How to get list of business partner that deleted via BUPA_DEL, who is perform deletion and when its deleted? Any report for this need?
Thank you

Hi Agus,
There are no way to restore data deleted by this transaction.
The only way is restore the backup if the BASIS team activated in your enviroment.
Regards.

Similar Messages

  • I just deleted and restored iTunes because I had 4 or 5 of each song. After all that I STILL HAVE 4 or 5 of every song. HOW DO I FIX THIS?

    I just deleted and restored iTunes because I had 4 or 5 of each song. After all that I STILL HAVE 4 or 5 of every song. HOW DO I FIX THIS? Or do I just stop using iTunes?

    Since this a potentially drastic approach I will remind you that at this point you ought to have a complete backup of your library in case things get worse rather than better...
    Select the Music source, select all (ctrl-a), delete, DO NOT SEND FILES TO THE TRASH!
    Repeat with other media sources if you wish.
    Import your media, get it organized, backup again.
    I can recall if I've sent you in the direction of this information yet...
    Here are the typical layouts for the iTunes folders:
    In the layout above, with the media folder (everything in the red box) inside the library folder, the library is considered to be portable. A portable library can be moved from one path to another without breaking the links between the library and the media and being self-contained is much easier to backup
    ... but if you are going to start over I'd recommend you work with iTunes rather than fighting it. If you want your own folder structure for your media (I know I do, but generally recommend people don't because it is less hassle) then turn off the option under Edit > Preferences > Advanced to Keep the iTunes Media folder organized, but place your structure somewhere inside the iTunes media folder. That way you get the advantages mentioned above and are much less likely to create duplicates by accident again in future.
    tt2

  • I have an IPad with a Restriction code that we cannot remember.  Is it possible to delete and restore the IPad without the code?  If not how do I figure out the code or how t? o remove it?

    I have an IPad with a Restriction code that we cannot remember.  Is it possible to delete and restore the IPad without the code.  If not how do I figure out the code or how to remove it?

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • Mass deletion of users business partner and position in SRM 4.0

    Hi Experts,
    We have a requirement of deleting 1000 +  users who are locked in ECC from SRM Organization structure. For which I got the list of users who are under u201Cdeleteu201D group from table USR02. Then I found the business partner number of those users from table BUT000. Once I got the BP number I can do mass deletion of the BPs by using BUPA_DEL.
    Now, my problem is I need to mass delete the position of the users as well. If I delete it one user at a time I can go to PPOMA_BBP and select the position and delete the object.  Can anyone please help me on how can I do mass deletion of the positions of those users, its pretty urgent. I am waiting for your valuable suggestions.
    Thanks
    Div
    Edited by: Tridib Das on Sep 29, 2011 4:15 PM

    Hi Velu,
    To find the business partner or the central person id we can' go to table HRP1001 and get the central person id / business partner by inputing the parameters in the selection field as :
    Object type : CP / BP
    Rel. Obj.type: US
    ID rel. object : Give the id of the user
    this shows the object id . Anyway thanks for your help .
    Cheers
    Div

  • How to know who Deleted Item or Business Partner

    Hi all!
    In SAP B1, we have change log to track who updated information for Item master or Business Partner
    In case, one Item is deleted by user. How to know and control this.
    Thanks!

    Hi ,
    This query could help you in case of BP, Try it:
    SELECT CardCode,cardname,Deleted,usersign FROM ACRD T0 WHERE T0.[Deleted] ='Y'
    Same in the case of AITM.
    Thanks
    Ashutosh

  • Problem with display of Chinese, Japanese, and Korean business partner name

    Hi All,
    I'm trying to understand how to get GTS to properly display the names of the business partners that are in Chinese, Japanese, or Korean.
    I have set my SAP gui localization as follows:
    - Select the Customize Local Layout, then Options, then the |18N tab,
    and check the Activate Multibyte Function box
    - Select the Customize Local Layout, then Character Set and check
    Unicode and Simplified Chinese
    In the source R/3 system for these partners, if I set my localization to the right language, the business partner's name and address would be displayed correctly in the C/J/K character sets when I select the appropriate version in International Version of the address.
    However, in GTS these names/addresses would just appear as nonsensical characters (like "·ÉÀûÆÖÕÕÃ÷µç×Ó£¨ÉϺ££©ÓÐÏÞ¹«Ë¾").
    For example, if I do a look up of a known Chinese BP by number, in the seach results window the Description field of that BP would just be garbage, but if I put the cursor over the Description field, then the correct Chinese display (matching what is in R/3) would appear for as long as the cursor is over that field. This indicates that the data was transferred correctly from R/3 to GTS, but some how the display does not default to the right character set.
    If I select that record, the resulting detailed display would also have garbage as the Name and Address. However, here putting the cursor over the fields still do not bring up the correct character displays, and I have found no way to get the correct displays to appear.
    Does any one know of a way to get the displays to show correctly in GTS?
    And can anyone explain why putting the cursor over the Description (in the BP search results window) would let the correct display pop up?
    Greatly appreciate any insight anyone can provide.
    Thanks,
    Rex

    Hi Rex - As per message - this looks to be an issue for BC-I18-UNI and not the GTS application:
    For general information purposes - last response from BC-I18-UNI development via oss message:
    "However, from readind the message, I believe I understood the reason for
    the described effect. I assume GGT is a non-Unicode system? If yes, this
    is my idea:
    The data stored in the BP tables, e.g. for number 2555442 have been
    entred manually, probably within a session using English as logon
    language. In this case the data are stored with a Latin-1 codepage. This
    means the stored data are actually Latin-1 data, not Chinese. By
    switching the font at front-end side to Chinese, the characters appear
    as correct Chinese, although they are still Latin-1.
    It is possible that different GUI components show different effects in
    this context, as the internal font switching mechanisms behave a bit
    different in different components, e.g. control based components are
    different from normal Dynpro-based fields.
    To have correct Chinese data, you need to logon with language Chinese.
    This holds for all non-Unicode systems. On Unicode systems, the logon
    language is arbitrary."

  • HT201320 This last week, I updated my iPhone with iOS6 and now my Yahoo Mail no longer works.  I've deleted and restored the account without fixing the problem.  The iOS update did not effect my iPad.  Anyone have a suggestion?

    This last week (of 17 Sep 12) I updated my iPhone 4 to iOS 6 and now my Yahoo mail does not work.  I keep getting a "Yahoo server busy" message.  This problem has not effected the update to my iPad 3 - it works fine.  In addition, I have deleted and added my Yahoo mail - same result.  Looking for ideas on repairing the link between iOS 6 and Yahoo.  Cheers

    Same here, albeit with a 3G and both a work Exchange account and personal Gmail are out of action.  Reentered my password on the Gmail to no avail.
    Unfortunately it seems that increased success has come too fast to Apple, it's starting to display Microsoft-like behaviors, e.g., releasing stuff and letting the customers serve as the beta / guinea pigs.

  • SAP Vendor Number and MDG Business Partner mapping table name

    Hello Expert,
    We are using MDG for Materials and Suppliers, while using we found some times error on vendore number and business partner mis-matching.
    Could you please tell me which table I should check where I can see ECC vendor number with MDG business partner number.
    It will help us to validate the wrong mis-matched one to correct in one go.
    Regards,
    Vijay Mittal

    Hello Vijay,
    You can find the Vendors in table LFA1. Your Business Partners are in table BUT000.
    The number ranges transactions are as follows: Vendors - XKN1, Business Parners - BUCF
    You should check the NR Status and make sure your value is greater than the last created LFA1 record, so your PPO does not fail (that's in case you're going the direction BP -> Vendor and don't have the "Same flag" active in view V_TBC001). If you are trying to synch up from Vendor to BP, you'll have to check the view CVIV_VEND_TO_BP1 instead.
    Hope that helps,
    Boris

  • Approval procedure for item and for business partner

    Hi
    Anyone has done somekind of approval procedure for an item or for a business partner?
    Is there anyway to make this? Or just for documents?
    Regards,
    Vasco

    You can only use SAP approvals for documents. You can construct a less controlled approval method for master items by first creating a BP mandatory "Approved" UDF", and using an auto refresh FMS to set it to blank unless "on hold" is checked when the BP record is created. This will prevent it from being used in documents. Then another UDF for an authorised user to initial the BP record as authorised and uncheck the hold flag. There is nothing to stop this method from being abused but you do have the History log so that you know who did what. I have not tested the exact procedure described but have done similar for documents (to force a save as draft) when the SAP Approval has been too restrictive. Otherwise it's SDK.

  • SSL between XI and a business partner

    Has anyone gotten SSL between XI and an external business partner up and running? I would like to have a short discussion with someone who has been successful. I am trying to send messages out from XI that require XI to be active. Please don't direct me to the documentation because we have read it and  it has not been very helpful. 
    regards,
    Chris

    Hello Richard,
    I can't see we have been successful but we are close. Here are the steps:
    1. HTTPS service needs to be active (Tx: SMICM)
    2. You need to load the SSL certificate key in your XI system (Tx: STRUST)
    3. You will need to create an RFC (type G)pointing to your target server. Then select the SSL (acitve) and the private key you want to use (you will need one RFC destination by server key).
    4. Use your RFC destination in your HTTP Adapter:
    on the HTTP adapter don't select URL address but select RFC destination.
    I hope this will help.
    PLease don't heistate to ask if you need more detail.
    Mustapha

  • Deletion/Change of Business Partner Relationship

    All,
    We are having a issue regarding replication of partner relationship changes from R/3 to CRM. Partner deletions/changes in R/3 are not replicated in CRM. We do not do any customer master changes in CRM.
    If a Ship-to is deleted in R/3 the BDoc comes in and posted successfully in CRM but deletion of partner does  not happen in CRM. Also noticed that the BDoc has TASK = "M" instead of "D". If I manually change it in the debugger (in R/3 Plug-in FM), the relationship is deleted. Is there any customizing entry I need to maintain to replicate this change from R/3 to CRM.
    Also, the changes are not replicated if a relationship is changed from one Ship-to to another. The BDoc is posted successfully, the new ship to is added but the previous one is not removed.
    Any insights would be highly appreciated.
    Thanks!

    OSS Note - 497146

  • Delete and restore scheduling of reports

    Hi
    I have BO 4.0 installed on Linux Platform
    Is there any way i can
    1) Backup all the scheduling information for all my reports
    2) Restore only few of them at a time
    All i want to achieve is as we are migrating from 3.1 to 4.0 we want to schedule only few reports at a time like 50 reports per day

    Even, I've faced this issue in my env.
    I did the following and it got fixed automatically, try it out and let me know if it works!!
    Goto Default settings of that report in CMC
    Add the new event to the report and SAVE it. (I know that the old event will not be there but if it present, please delete it and add the new event or some test event)
    Goto Schedule and create some dummy schedule to check check whether the report runs properly without any issues. (In my case, I tried scheduling the report for "Daily" @ 9 AM.)
    Open the recurring instance details and see if the new event detail is reflecting in the event dependency.
    Make sure that the event which you have fixed is getting successful.
    Validate the 9 AM instance which you have scheduled to verify whether it completes successfully.
    Regards
    Vijay

  • Can I delete and restore notes from my iPad 1

    My son needs to borrow my ipad (1st gen) and I want to delete the notes.  I've put them all on the cloud, but I would like to restore them after he is done with my ipad.  Is this possible/

    You will need the AirPort Utility application on a Mac or PC to be able to configure the AirPort Express since the operating system of the iPad will not support the AirPort Utility application.
    The AirPort Express will usually work "as is" if you plug it into the Ethernet jack at the hotel, but the wireless will be "open", meaning that anyone in range could connect to the signal if they happened to be searching for a wireless connection.

  • HT5163 Is there any way to permanently delete and restore email messages from my IPad without erasing everything?

    I am not familiar with IPad usage but wondered if there is a way to remove all my emails without removing everything else, ie: photos, songs..?  Does a restore erase  everything? Thanks!

    I cannot delete an email address that was also an Apple ID for awhile. It keeps coming up as an "email return to" address on compose in gmail.
    As a result, I removed all mention of it in my keychain and cancelled it in Google. I called Apple support and for awhile was able to use time
    machine to restore it, then lost all my addresses again. My iPad mini has addresses on it but I'm concerned that if it syncs with my Macbook Air
    the iPad addresses will disappear also. How can I prevent an unwanted sync?

  • Backup, deletion and restoring.

    I have an app database of 30 gb in the itunes folder in my C drive.
    Today I backed up my iPhone and it cost me around 10 gb when my phone had 2 gb of store left. Is this normal ?
    My question is that when I delete my backup from the itunes preferences, does it delete (a) only the backup of 12 gb ? (b) the app database of 30gb ? (c) both ?
    Also would it make a significant difference of deleting the backup and again creating it ?
    I ask this because both of them are taking a lot of space in my C drive.
    I need an alternate of storing either or both of these backupsin another drive. Is there a way ?

    Try this...
    *Fast backup for iTunes library (Windows Only)*
    Grab SyncToy 2.0, a free tool from MS. Use it to create a backup copy of your iTunes library & any other media folders onto another hard drive or network share. After making the initial backup copy use SyncToy to periodically synchronise the backup copy with your library and only the changed files will be copied saving lots of time.
    When the time comes to reformat your PC, do a final sync, then open iTunes & deauthorise the PC, reformat & rebuild Windows, copy the backup folders back to the same location as they were previously, install iTunes and it should all work perfectly.
    tt2

Maybe you are looking for