Delete and Return delivery button in confirmation

Hi All,
We are in SRM 4.0 and using extended classic scenario.
Recently we had an issue with the batch job CLEAN_REQREQ_UP. It has been scheduled for every 2 mts and it used to complete within 5 seconds. But one schedule of the job was running for a long time (3 days) and we didn't notice that. Parallaly the other schedules of the jobs are running fine.
I checked the shopping carts, Po and GR created on those 3 days and they got udpated in back end system and also in SRM withtout any issues.
But the "Delete and Return Delivery" button is not active in the confirmation documents posted on those three days. We need to activate those buttons in the confirmation documents.
Note: Problem is NOT with the confirm Goods / service transaction. It is only with the confirmation documents posted on those 3 days.
Is there a way to activate those two buttons in the confirmations document?
Please help me.
Thanks.

Hi Arun,
Run the Report BBP_GET_STATUS_2 for those three days only.
and then check.
Regards,
Sachin

Similar Messages

  • I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

    Hey skyshade13,
    Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    For further information see the following information:
    OS X Lion: iTunes opens to "created by a newer version" alert
    http://support.apple.com/kb/TS3918
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Thanks,
    Matt M.

  • Return Delivery button is Disabled for Goods confirmation

    Hi,
    We are on SRM_SERVER 550, SP11, SAP 4.7 backend and have configured Extended Classic Scenario.
    I am unable to do Goods Return delivery for Confirmations which have status u201CPosted in the Backendu201D.
    The Return delivery button is Disabled, while the Delete button is Enabled, when I access confirmations through u2018Display and Process Confirmationsu2019 screen.
    We have also run the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2.
    Kindly let me know if any additional job needs to be executed or any specific note that needs to be implemented.
    Thanks,
    Kiran

    plz wait for some time . I am pretty sure STATUS JOB do this job . what variant you used for status_2 job?
    if you could do it backend , but if you could not in srm means, that PO status was not updated.
    even i had experience this in classic, i evening did GR inSRM and immediately wanted to do return delivery but that button was disabled for me. morning i saw it was ok . i saw RETURN was active.
    muthu

  • Difference between confirmation cancellation and return delivery

    Dear Gurus,
    can you explain to me the difference between confirmation cancellation and return delivery in terms of processes and impact on ECC postings?
    Thank you in advance for your collaboration,
    Fuffo
    Edited by: Fuffo Fuffi on Dec 21, 2010 2:36 PM

    Hi
    Confirmation Cancellation --> is used for reversing a confirmation which is posted wrongly in the system. This is generally used for reversing a faulty transaction.
    Return Delivery --> is used for sending the goods back to vendor. This happens when we receive goods from vendor and for some reasons the delivery does not meet customer's specification due to any reason. In these cases you record the goods movement as Return delivery sent back to Vendors.
    Regards
    Virender Singh

  • Difference between subsequent adjustment and return delivery ...?

    Dear all ,
    Provide difference between subsequent adjustment and return delivery ...?
    sri....

    Hi,
    Subsequent delivery means you have to reverse the goods receipts after
    entering corresponding invoice and you want to post another goods receipt
    than use subsequent delivery in MIGO with reference to old goods receipt
    number.
    Subsequent adjustment means updating the price difference in the quantity
    already supplied.
    Ex: Original invoice price is 100 for quantity of
    10 nou2019s, i.e., Invoice amount is 1000 after doing MIRO for amount
    1000 you get another supplementary Invoice for amount
    100 towards price revision. In this case  you have to adjust through subsequent
    adjustment.
    If your question was on posting logic for alternative posting of exchange rate differences. then,
    Subsequent adjustment*
    When you make a subsequent adjustment, the system posts all values with the exchange rate at the time of the goods receipt.
    Return Delivery
    If there is a return delivery, the posting date is based on the time of the goods receipts. The system converts the stock value using the average exchange rate with reference to the purchase order.
    Regards,
    Sadiq.

  • How to remove the delete and edit toolbar buttons from the Overview page

    Hi,
    In the account/contact overview page, we see that the interaction history assignment block does not support the EDIT and DELETE options.
    However, when we click on the hyperlink description of an activity in the interaction history, we get into the overview page of the activity. Here we can see the DELETE button and the EDIT button.
    Is there a way to remove these two options from the overview page of an activity which is in COMPLETED status and in the interaction history section?
    Please advice.
    Thanks & Best Regards,
    Ramesh.
    PS: We use CRM 5.2 Web UI.

    You can hide the box that shows the snippets and the "Restore Previous Session" box with code in userContent.css
    *http://kb.mozillazine.org/userContent.css
    *http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    *ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>@-moz-document url(about:home){
    /* hide snippet container on the about:home page */
    #snippetContainer { display: none !important; }
    /* hide sessionRestore container on the about:home page */
    #sessionRestoreContainer { display: none !important; }
    </nowiki></pre>

  • Free Receipts and Returnable Delivery

    Hi,
    I am having two requirements
    1.Free receipts thur PO
    2.Returnble delivery items thru PO>
    Could u please suggest how can I do this actitvity step by step along with required configration chnages.
    Please explain scenario 1 as Free Receipt thru PO (with ZERO price) and
    2.Returnbale material thru PO.
    Thanks
    Vijji

    Hi
    In both case you can create PO with flagged in item overview for free items system here automatically set price column as zero
    And in second option also you can select return delivery option in PO
    Create PO with Return delivery flagged>GR against PO here system automatically select Movt type 161>J1IS if it is excise mateial.to reverse the excise duties which you had availed credit earlier.

  • Auto Quality Notification and Return Delivery Via Usage Decision

    Hello Gurus
    Need help !
    I am using the Quality inspection with Material Specification.
    Just an overview of my current system settings -
    Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
    My Requirement -
    If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
    Can someone pl help me with detailed steps for acheiving this...
    Reqward points will be given immediatly for sharing thoughts
    BR

    Hi
    Thanks for reply.
    I think I missed some thing in my question
    I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
    However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
    I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
    OR
    Any option to create Delivery  Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
    So I am aiming to get Delivery Document not material document as our materials are WM managed...
    Could some one put some light on this...
    BR

  • My a, q, 1, delete, and volume control buttons no longer work

    I'm currently on a different computer, but on my Macbook the 'a' 'q' '1' 'delete' and the buttons to make the volume louder and softer no longer work. its only those six, but for obvious reasons i need them fixed.
    i had spilled some milk on it about a day or two ago, but its been working since then, like all this day and i am not sure why it would just stop.
    i'm assuming i'll need to go to the mac store but any ideas on why this might have happened? or what will have to be done to get it fixed?

    The keyboard and the top of the case are one unit which means you're also replacing the trackpad so it isn't going to be inexpensive. Dunno what Apple will charge you for the parts + labor but expect to spend over $200. OTOH, if you Google *MacBook keyboard replacement* you'll find other repair options including some video showing how to do the repair yourself and sources for spare parts.

  • Subcontracting and Return Delivery

    Our Company has a subcontractor and send it some components. we have a third party that send other components to that SC.
    when SC wants to return some components ( by quality reasons for example) to our company I proposed MB1B -> MvT. 542 to change materials from provided to vendor to our SLOC.
    but when SC wants to return components to our Third Party, I have NO solution
    (We Create PO for that third party. when SC recieves components, we do GR so those components go to provided to vendor).
    Does SAP has any solution?
    thanks in advance

    Daniel,
    As Jürgen mentioned above searching for content and I would add to this testing in your sandbox should be done before starting to post questions like this. You best learn things by researching and testing. Then ask when you are really stuck and can't find any answer.
    Here some help for you.
    If you want to return directly from the subcontractor's location and thus return directly from subcontract stock you create a standard return PO and put into the delivery tab section of the item the vendor number for the subcontractor and check the SC vendor check box.
    When you then process the return PO via say MIGO_GR the return will happen directly from the subcontractor.

  • Difference between LIKP-VBTYP 'Returns' and 'Returns delivery for order'

    Hi...I have tried researching this myself, but still can't seem to get a good answer.  In the LIKP table, there is a VBTYP of 'H' for returns and 'T' for returns on delivery order.  I am trying to understand the difference between the two...how could you have a return with it NOT being on a delivered order?  Is there something basic I am missing? Any and all help extremely apprecated.

    Hi,
    I fully agree with the input given by Mr G Lakshmipathi.
    VBTYP as field description implies, it just says about the SD document category , but applicable to all documents such as order(includes outling agreements, inquiry,quotation as well) , delivery , billing.
    These values are inbuilt. wrt: document behaviour we use this doc category.
    You can even observe, doc category: K & O -
    K = Credit memo request  which applicables only in VA01
    O = Credit memo  applicables only in VF01.
    if you try to execute the table LIKP ( from SE16) with VBTYP=H, you will not get any doc's
    I hope it adds info.
    Regards,
    Reazuddin MD

  • Returns delivery deleted

    Experts,
    I have deleted return delivery .
    After deleting it will,the return order is still show in document flow.
    After deleting it  why is it still showing in the document flow?
    Thanks

    I went to VA02 and tried to delete RE order .
    error msg
    This document cannot be deleted
    Message no. V1006
    Diagnosis
    The document cannot be completely deleted because further processing has already taken place or the document item does not permit deletion of the document.
    Procedure
    Display the document flow to see which subsequent documents have already been created.
    You can attempt first of all to delete all the subsequent documents and then delete the current document.
    If it is not possible to delete all subsequent documents, you can still enter a reason for rejection for all items to prevent any further references or deliveries being made.
    I went to VLO2N and tried to delete the returns delivery and the error
    Item 10 cannot be deleted (GM status)
    Message no. VL111
    Diagnosis
    The goods movement status (partially or completely processed) does not allow the item to be deleted

  • Returns between Goods-Issue and Billing - Return delivery before Invoice

    Hi all,
    Here comes a problem with sales process configuration.
    Buisness case:
    Customer generate a sales order document, outbound delivery and posting goods. Invoice is generate on end of every month. Very often return delivery is generate before generate the invoice. Outbound delivery is after posting process and cancellation process is not recomended. If invoice will be generate with reference to the sales order, the quantity will be wrong, because system get information from sales order without correction to return delivery quantity. The assumption is that the invoice must have a correct quantity as a sum based on outbound and return delivery.
    So...any solution in standard?
    Regards,
    Michael

    In the RE Sales Order configuration you can make reference mandatory. Once you do this the user will not be able to even create a returns order without the original invoice.
    I hope this helps.
    Regards,
    Mani

  • Error while posting return delivery to backend system

    Hi All,
    We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
    Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
    Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
    Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
    Thanks
    Siddarth

    Hi Siddarth,
    Please implement the note below, which is included in SP05.
    2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
    Regards,
    Wendy

  • Error msg when doing a Return Delivery

    Hi All
    Can you help here please
    We are on EC SRM 4.0 and have just upgraded to SP11
    When doing a return delivery on an existing confirmation,
    sometimes we get a error message"Confirmation already exits"
    Then we cannot do anything with this confirmation
    Thanks
    Prakash

    Hi
    <b>Please go through the SAP OSS Notes below -></b>
    Note 718138 - Reading of backend purchase orders for EC POs in EBP 4.0
    Note 872011 - Return not possible for item with final_entry set
    Note 972572 - Error BBP_PD 860 for return delivery of a confirmation
    Note 1069875 - Error when second partial cancellation is posted to backend
    Note 1031297 - Movement type is always read from Customizing
    Do let me know.
    Regards
    - Atul

Maybe you are looking for