Delete append structure

I have appendead a structute to an extract structure but now I want to delete that structure which is appended.Please tell me how to delete an append structure.

Hi Vaishali
Adding to Kishan's inputs, incase the append structure has typical fields like amount remember to adjust the table back via transaction SE14.
Kind Regards
Eswar

Similar Messages

How to delete append structure in a table?

Hi guys,
How can I delete the structure appended to a table?
Thanks in advance!

hi,
select the structure in the table which the atructure is available by going to SE11
and choose the Delete line option by right clicking.
or
Go to SE11
enter the structure name
choose the delete option from Application toolbar.
Reward points if useful
Chandra
Message was edited by:
Chandrasekhar Velpula

Deleting append structure

hi guru's
is there any way to delete the appended structure? i enhanced a structure by appending it. i want know the way how to delete this append structure. the append structure has a field. it is populated by user exit.i have developer accesskey.
thanks in advance. waiting for reply
regards
anil

Hi,
Deleting the append structure , you can Delete it directly from SE11 using the APpend structure name.
No need of Access key, Because it is Custoimer name space.
Regards
vijay

How can i delete append structure ?

i created / add append structure to standard table ,
but now i want to delete here , how can i do so ?
i didn't find any option for it .
thanks .

Hi Dakota,
Go to SE11 and give the name of the structure that you have created.
(Say ZVBAK.. for VBAK..) and just click on the delete (trash can) icon.
This structure will also be inactivated in the table.
Regards,
Sameer

Delete customs append structure issue

Hi Gurus,
I added a customs append structure with a 'YY' field in one of LO extractr structures.
Now I don't need that field, I need to delete that customs append structure and field from the extract structure. I deleted that 'YY' field but I don't how to delete customs append structure which one I created.
Please advice ?
Thanks
Liza

Goto SE11 -> Give append structure name ..should be ZA* and select delete option , This will delete append structrure ref. from extract structure.
Hope it helps..

Delete the appended structure of an Extract Structure

Hi All,
I have appended the extract structure of vendor text with additional fields. Now i would like to delete my appended structure along with the fields of my appended structure but i am unable to find the option to delete this. Kindly guide me how to go about it?
Thanks,
P.S

Hi,
Goto SE11 -> Put append structure name ..should be ZA* .. and select delete option , This will delete append structrure ref. from extract structure.
Hope that helps.
Regards
Mr Kapadia

How to delete an appended structure

Hi everyone-
I have appended a structure to MC02M_0ITM (2lis_02_itm) and now I want to delete this. Can somebody tell me how can I do this?
Thanks.

Hi Punzu,
You need not delete the appended structure, rather just check the "Hide field" column against the field in your datasource(RSA5 or RSA6 in R/3).
This excludes the field in the extraction structure from the data transfer . The field is then no longer available in BW for determining transfer rules and therefore cannot be used for generating transfer structures.
So this accomplishes the task which your are looking for in a wise manner, because if in the future when u require the same field in ur transfer structure u can just uncheck the "Hide field" option and use it.
Hope this helps
Samarasimha

How to activate the transparent table along with append structure

Hi,
I add the new fields in existing append structure on tale VBAP.
Initially i provide them the data type as Char with length 20.
Similarly i added the fields in user exit on scree 8459 to add fields on screen.
Until this eveything was working fine.
Then my functional consultant ask me to delete one field from structure and change the length of other data types to 40 characters.
I done this changes but when i go to activate that append structure its giving me error that certan structures in which it is been used are not adjusted and activated.
The table is not adjusted through SE14 - Database Utlity.
Its showing me that Runtime Object and Transparent table are different and not consistent.
Can i delete the runtime object?
The domains which i ave changed are also not geing activated.
Suggest me the node of problem and solution also.
What should be the problem.
What should i do to solve the problem.
Suggest me the solution if any.

Give a trail that instead of activating all together, activate low-level objects (domains, data elements etc)first and then high levels (structures, tables) individually. With this approach you could find the errors easily and can resolve quickly.
Regards,
Prasanth

Error while appending structure into BSEG Table

We had appended BSEG table with a ZSTRUCTURE to enable Custom field in MIRO. Subsequently there was a change required in the appended field. After Changing the field there was adjustment required to activate the appended table . However due to slow system performance during that time the Adjustment SE14 timed out. And created inconsistency in BSEG table.
If I Do the Table adjustment now it is showing below error.
We tried to delete the append structure also but the structure is not appearing in the append structure list to delete.
Even if we try deleting the Z structure from se11 it is throwing below error.
Any one could help me out to resolve this..

hi Ramesh,
Please First Check if the Database version and disctionary version are in sync.
Also, it could be the case that you would have enhanced an already existing Append stucture. which might be being used in other BKPF dependent tables.
Please check

EEWB - In BP, adding a new field regenerates append structure

Hello,
After adding or deleting a field using EEWB, I have the following issues -
1. The new append structure that was created for BUT000 gets regenerated
2. Field labels get overwritten by field names
3. The order in which the fields were seen on the screen gets altered
Is this a known behavior of EEWB? How to alleviate this?
Thanks!

Thanks for your input Satish!
I searched using the application component suggested and the keyword and it was not very useful.
Some more details -
I created some new fields using EEWB. When you go to transaction BP, the standard tabs are displayed - ex - address, bank data, notes, etc. But now there is a new tab - Customer Data that has my custom fields on it.
In the backend, SAP has created an extend structure for table BUT000 that has these fields in it.
When I go to this extend structure, my fields are there with a ZZ prefix - Ex: ZZFIELD1, ZZFIELD2, etc. If you go to the details of these fields in data dict - transaction SE11, the Field labels - Short, Medium, Long and Heading are the same as the field names. Ex: in the first case, the four field labels will be - ZZFIELD1. I then changed the field labels to something meaningful - Ex: Renter name and rental date. After generating the structure, these labels are then displayed on the Customer data tab. So far so good.
However if I add a new field - ZZFIELD3, then all the label names that I had given (Ex: Renter name and rental date) get erased and replaced by the fieldnames again.
Also the order in which the fields were diplayed gets altered. Ex: earlier the Customer data screen was showing - ZZFIELD1, ZZFIELD2. Now it shows - ZZFIELD3, ZZFIELD2, ZZFIELD1.
I hope I have explained this issue.

Append Structure to MCCOMP but not appear in Extract Structure (LBWE)

Dear Experts,
We are using the datasource 2LIS_04_P_COMP
1) We append a field into MCCOMP and MCCOMPB, but that field doesn't appear in the pool of communication structure fields. Therefore, we cannot move from the pool (right side) to extract structure (left side)
2) We need to add a field into MCCOMP, as we need to capture Delta for this field. Is there any user exit that can populate value for this structure?

Hi,
Follow the steps.
1. Delete Setup tables in LBWG.
2. Clear Q in SMQ1/LBWQ.
3. Delete Q in RSA7.
Then fine the ECC correct client for Customizing and there you can do the changes and activate it. If still it is not allowing and you want to add fields by using enhancements then goto SE11, and give MCCOMP and Append Structure and add fiels and write code in CMOD.
Thanks
Reddy

MARA table going DUMP due to append structure

Hi all,
I have created the structure and i have Appended to MARA table. Since then MARA Table is Partially Active State. So, i tried to delete the structure. But i am unable to delete that Structure, because it was used in MARA Table. Even i tried SE14 Transaction also.Here i did Adjust and Activate table, But it is showing SHORT DUMP. Even if check the Error in SE11, it is showing "No inconvience found, but i activate the table again it is going to dump ".
How to solve this .
My requirement is to bring back the MARA table into its origional state. and how to delete the Appended structure in MARA table ?
Thanks in advance
KR

Hi,
An APPEND structure is a DDIC structure that is assigned to a single DB table. In the ABAP dictionary (SE11) you call the corresponding DB table and create the APPEND structure for this table.
In which scenario do we create APPEND structures? Obviously, the attributes available in the DB table are not sufficient to meet your requirements. Thus, you append the missing fields to the table.
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
Regards

Getting Error in Append Structure for Standard

Hi all,
Here i want to Append Structure in table RFPOS so i done all procedure . in this i have four field like ZZKUNNR , ZZNAMED , ZZLIFNR, ZZNAMEK. But when i active this structure this time i get error like
"Field name INDEX is reserved (Do not use structure as include in DB table)"
and
"Field name ORDER is reserved (Do not use structure as include in DB table)"
BUT structure is activated . now i can see my change in fbl3n T-code so i get proper change in this.
But when i transport a request in Quality this time i am not getting same output which i get in Development .
And yes request is transported with warning (YELLOW SIGN). So is it possible for this warning i am not geeting my proper output in FBL3N.
Please kindly help me out
Thanks
Keyur

Hello,
Did you do anything else also that you might have missed to mention here?
For example, was your Append structure already present in the table RFPOS & you deleted some of the fields & inserted the new ones. In this case, you might have to activate the table from database utility (transaction SE14).
If this is an append structure & if it was pre-existing (not created by you), then this structure might already had been assigned to any other table. In such a case, system will not allow you to directly assign it to a different table. You may have to first assign it to an INCLUDE structure.
Also, as you described, it indicates that there might be some problem with the fields named INDEX & ORDER. Try checking for it.
May be you should check with your BASIS guy if the transport was successful & if not, the error description.
Also, try checking the quality system for your changes.
Hope that helps you in getting some direction.
Let me know if that work out for you or not.
Regards,
Saurabh

Delete append of a table with dependend view

Hi there,
I would like to delete an append structure of a table. Therefore I deleted the appended Z structure in SE11.
But I could not activate the table after wards because there is a database view which depends on that table and contains also the appended field. Is there a way to delete this field from the view or regenerate the view without registering the view as a modification?
Thanks in advance,
Martin

Hi Fisher,
First check the table where used list and check the Include structure fieds are used..
if include structure fields are being used it will not allow you to delete if deleted forcl also the reports go to dump..
when ever you alter the table or adding new field the mainatainance view will not work..
so activate the databse in background --> through menu-->utilities--> data base utilities--> adjust the datase and activate..
regards,
Prabhudas

Append structure -- to structure

i made append structure to cekko and it's weel done i get zacekko.
the problem is: i want to delete the zacekko , how i can do it?
what the steps..?

1. Goto se11
2. enter your append structure name.
3. press delete
4. It will delete this append,
also in the original table/structure
where it is used, AUTOMATICALLY.
******************************8
or
Select that structure and click on the '-' icon which will delete
then goto SE14 , Adjust and Activate that table

Delete append structure

Similar Messages

Maybe you are looking for